EXTERNAL PERIODICAL SERVICES FOR DOMESTIC AREA UNDER GE (AF) ADM AREA AT AF STN GWALIOR

Amount

M&L for Complete removal of existing treatment on walls (any number of layers) by scrapping with mechanical wall sander(having mechanical vaccum mechanism)having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" , Washing, rubbing down and stopping of painted surfaces to make the surface free from dust, loose paint etc by skilled labour and filling the cracks and depressions with putty to make the surface even and smooth matching to the adjacent wall surfaces and applying Two coats of Acrylic Smooth exterior paint with Silicone additives of required shade/tint as approved by GE over and including priming coat of exterior primer, diluted with water and applied as per manufacturer instructions with fully automatic airless spray machine of paint application with a flow speed of minimum 1 litre per minute having a pressure of 3300 PSI, and allow 6-8 Hrs to dry the surface before application of each subsequent coats of primer/paint to any type of building at any height including necessary scaffolding and safety measures and complete as specified and directed. (Make : Asian Paints Apex Ultima Stretch or Berger Weathercoat Long Life Flexo or Shalimar Paints WeatherPRO+ as approved by GE) NOTE:- (i) Primer and paint shall be of same make. (ii) The minimum qty of exteriror paint and primer shall be used as per coverage capacity of paint and primer as recomended by the manufacturer .

M&L for preparation of new surfaces of wall and applying Two coats Acrylic Smooth exterior paint with Silicone additives of required shade/tint as approved by GE over and including priming coat of exterior primer, diluted and applied as per manufacturer instructions with fully automatic airless spray machine of paint application with a flow speed of minimum 1 litre per minute having a pressure of 3300 PSI, and allow 6-8 Hrs to dry the surface before application of each subsequent coats of primer/paint to any type of building at any height including necessary scaffolding and safety measures and complete as specified and directed. (Make : Asian Paints Apex Ultima Stretch or Berger Weathercoat Long Life Flexo or Shalimar Paints WeatherPRO+ as approved by GE) NOTE:- (i) Primer and paint shall be of same make. (ii) The minimum qty of exteriror paint and primer shall be used as per coverage capacity of paint and primer as recomended by the manufacturer .

Taking down cement plaster of any description from wall/ceiling including raking out joints hacking for key, scrubbing down with water etc, complete all as specified and directed.

M&L for for 15 mm thick ready mix plaster with polymer modified premixed ready to use cement base mortar on concrete/ brick wall surface finish even and smmoth complete all as specified and directed.

M&L for 5 mm thick ready mix plaster with polymer modified premixed ready to use cement base mortar on ceiling surface finish even and smooth complete all as specified and directed.

M&L for preparation of newly plastered or unplastered surfaces of wall and applying two coats of white wash on ceiling surface, complete all as specified and directed.

M& L for Extra over rendering or plastering for work in isolated widths or in widths not forming part of general plastering such as in bands, sunk panels, cornices, skirtings, drip moulds and similar work n. exc 15 cm in width or girth; including cutting to edges, all mitres and stopped ends, complete all as specified and directed

M& L for Providing, cement concrete type B0 1:2:4 (12.5 mm mm graded aggregate) in roof kerbs or mud stops, rounded or chamfered on edges including demolition of un reinforced Cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed

M&L for Dubbing out average 10 mm thick on irregular face of walls in cement mortar 1:4 (when specifically ordered in writing) complete all as specified and directed

M&L for preparation of old surfaces (plastered or un-plastered) of walls including cornices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying one coat of white wash, complete all as specified & directed.

M&L for preparation of old surfaces (plastered or un-plastered) of ceilings including cornices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying one coat of white wash on ceiling, complete all as specified & directed.

M&L for preparation of old surfaces (plastered or un-plastered) of walls including cornices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying two coats of white wash on wall complete, all as specified & directed.

M&L for complete removal of existing treatment on old surfaces (plastered or un-plastered) of walls including cornices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying two coats of cement base paint, complete all as specified & directed.

M&L for obliterating old writing of any description, not exc 0.1 sqm with paint to match existing works complete all as specified and directed.

M&L for rewriting/repainting to existing writing letters or figures n. exc. 30 cm height in block Roman, Italian or Indian letters including stops, comma, arrows, brackets, dashes etc on sign board (Black or yellow base) including two coats of oil paint over a coat white base synthetic enamel paint complete all as specified and directed.

M&L for preparation of old painted surfaces of wood and wood based material of any description over 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old painted surfaces of steel and iron work of any description over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.

M&L for removing /cutting trees vegetation, digging out roots from concrete or brick wall filling holes on building (block of 4/6 qtrs) wall/roof/chhajja/water tank staging area etc and making good with cement mortar 1:4 complete all as specified and directed.

M/s Anjali Construction (BID ID -3264143)

M/s Bijender Singh (BID ID -3264581)