Const New Canteen and Registration Counter

Amount

Providing Structural Design Services ,GFC drawings, approval from client and further approval from structural consultant etc.

Dismentaling of old Streacture and shifting and re-assamble the dismentaling stracture at desired place, Complete in all respect and as instructed by EIC.PCC and Brick Work will be paid septaitly in the item.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Excavating, supplying, stacking and filling, Dressing of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in foundation trenches, plinth, sides of foundation etc. complete for all lift.

PCC : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)

Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. and Small lintels not exceeding 1.5 m clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks etc.

Centering and shuttering including strutting, propping etc. and removal of form work for :Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

Centering and shuttering including strutting, propping etc. and removal of form work for :Columns,, piers, roofs, Slab, abutments, pillars, posts and struts etc up to V floor Level including required scafolding Matarial Shifting and required support as per site requirements and as per direction of EIC.

Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers up to iii floor Level including required scafolding Matarial Shifting and required support as per site requirements and as per direction of EIC.

Centering and shuttering including strutting, propping etc. and removal of form for Stairs, (excluding landings) except spiral-staircases etc. up to iii floor Level including required scafolding Matarial Shifting and required support as per site requirements and as per direction of EIC.

Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.

Concrete of M25 grade with minimum cement content of 330 kg /cum All works upto plinth level

Concrete of M25 grade with minimum cement content of 330 kg /cum All works above plinth level upto floor V level

Providing and fixing of Steel reinforcement Thermo-Mechanically Treated bars of grade Fe-500D or more in column/ slabs/ footing/ foundations/ Lintels/ plinthbeam/tie beams/ chajja etc.. for R.C.C. work including straightening, cutting, bending, placing in position and binding and including of placing of cover blocks etc. all complete below plinth level and above plinth level up to V level floor.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and up to plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand)

Providing and Applying of 12 mm thick cement plaster of mix 1:4 (1 cement: 4 coarse sand) for internal surface, including surface preparation work, chicken mess jali fixing , hacking Scafolding/plateform if required etc. as per site requirements and as per direction of EIC.

Providing and Applying of 20 mm thick cement plaster of mix 1:4 (1 cement: 4 coarse sand) for internal surface, including surface preparation work, chicken mess jali fixing , hacking Scafolding/plateform if required etc. as per site requirements and as per direction of EIC.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm)

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. Size as per direction of EIC

Providing and laying Vitrified tiles in floor (Glazed vitrified floor tiles Matt/Antiskid/polished) in different sizes in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Double charge vitrified tile polished finish of size Size of Tile 600 x 600 mm /Antiskid floor tiles 300mm x 300 mm

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab of colour Black, Cherry/Ruby Red or equivalent

KOTA STONE FLOORING 25 mm thick Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :

P/F of Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete

Providing and laying integral cement based treatment for water proofing on the vertical surface by fixing specified stone slab 22 mm to 25 mm thick with cement slurry mixed with water proofing compound conforming to IS:2645 in recommended proportions with a gap of 20 mm (minimum) between stone slabs and the receiving surfaces and filling the gaps with neat cement slurry mixed with water proofing compound and finishing the exterior of stone slab with cement mortar 1:3 (1 cement : 3 coarse sand) 20 mm thick with neat cement punning mixed with water proofing compound in recommended proportion complete at all levels and as directed by Engineer-in-charge : Using rough Kota stone

Structural steel work in single section, fixed with connecting base/insert plate, including cutting, hoisting, fixing in position,Base plate welding,Drilling and hold fastening with Chemical grouting anchor bolting / fastening in concrete structree , applying a priming coat of approved steel primer and two or more coats of synthetic enamel paint of approved color and brand as complete in all respect as per direction of EIC.

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing, welding and bolted with special shaped washers in position applying a priming coat of approved steel primer and two or more coats of synthetic enamel paint of approved color and brand as complete in all respect as per direction of EIC.

Providing and fixing 10 mm thick multi-wall polycarbonate sheet skylight over the cut outs at approx 6.0 mtr height or other locations as per site requirements, fixing the polycarbonate sheets to the MS closed structre by means of Aluminium extruded sections,EPDM gaseket screwed to the steel structre & sealing the joints completely with approved sealent to make then water proof , inclusive of closing the vertical gaps with the same sheet, cleaning ,finishing neat, stagging /scaffolding up to required height etc. complete in all respect alongwith all the required accessories as per manufactures specifications and dirrection of engineer -in-charge. The rate to be including for all laps & wastages, flashing etc. Only net laid area of the sheet shall be measured for payment. This item is includes all the required accessories to fixing with the MS structre . Make : Polygal or equivalent as approved.

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 25x25 mm made of G.I. wire of dia 3 mm including strengthening with 2 mm dia wire or nuts, bolts, washers to strctural members. Gate/Door made of Chain link fancing with structural steel frame as required complete as per the direction of Engineer-in-charge.

Providing and laying 60mm thick faciory made cement concrete interlocking/Green paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making rainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work

Providing and fixing mild steel round holding down J bolts with nuts and washer plates complete.

Providing and fixing ISI marked 35 mm thick flush door shutters including ISI marked Stainless Steel butt hinges with necessary screws, Hnadles, Towerbolt , door stopper etc. conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. :

Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).

Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of glass excluded) (overall area of door shutter to be easured):Rectangular or square

Extra if louvers (not exceeding 0.2 sqm) are provided in flush door shutters (overall area of door shutters to be measured).Decorative type door

Extra for cutting rebate in flush door shutters (Total area of the shutterto be measured).

Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete 2nd class teak wood 50x12 mm

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). Sal wood

Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge.With brass cover plate minimum 1.25 mm thickness

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket,dash fasteners etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and paneling to be paid for separately)

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings,lik handles, tower bolts wherever required including the cost of EPDM rubber / neoprene gasket required Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing 12 mm thick prelaminated particle board Pre-laminated particle board with decorative lamination on both sides flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineerin- charge.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paidin basic item):

Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.

Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.

Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm).

Plumbing Work Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This ludes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joincomplete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc.

15 mm nominal dia Pipes

20 mm nominal dia Pipes

40 mm nominal dia Pipes

Providing and fixing of unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including Couplar,seal filler, jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.

75 mm diameter

Providing ,fixing, jointing and testing in position the single socket type ‘B’ UPVC pipe for soil, waste and vent installation conforming to IS:13592 cut to required lengths including all necessary fittings and specials such as ends,junctions,offsets,end plug, access pieces(plain or door) & single/double- Y .Fixing at wall/ceiling level, below floor level supported by heavy duty GIclamps & hangers,PCC pedestal etc. Making proper connection with rubber seal & lubricant joint of required depth including cutting, chases/holes in floors/walls/slab etc and making good the same after pipe have been duly laid and testing complete. 110 mm dia (For soil stack)

Providing and fixing stainless steel ( Grade 304) railing/Grating made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing . (Exposed on wall and hanging of pipe on true ceiling with required supports). This includes Brick Wall Core Cutting as per require, jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 15 mm nominal dia Pipes. Make : Finolex,Astral,Ashirvad

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing . (Exposed on wall and hanging of pipe on true ceiling with required supports). This includes Brick Wall Core Cutting as per require, jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 20 mm nominal dia Pipes. Make : Finolex,Astral,Ashirvad

Supply and fixing of counter sunk glazed Oval/Square Shape Wash Basin set of approved make with suitable tap holes, supported on a pair of painted suitable brackets.

Providing, fixing, testing & commissioning of C.P. brass single lever basin mixer with complete accessories as required.

Providing and fixing heavy duty S.S. Floor grating (100 x 100 mm) with frame of approved design including setting in floor with cement motor to match with floor finish as per architect requirement. (For Urinal trap, provide the S.S. cover above the traps as per requirement.)

Providing, fixing, testing and commissioning of 15 mm dia C.P. brass short body bib cock with C.P. wall flange of approved quality and making good as required.(Ablution tap for WC)

Providing, fixing, testing and commissioning of white vitreous China floor mounting type European water closet with 10 ltrs PVC flushing cistern (including flush pipe from cistern to WC), cistern angle valve (including the flexible pipe from angle valve to cistern) with required C.P. bolts, nuts, supporting arrangements, seat & cover with C.P. hinges & rubber buffers, complete with all accessories. Including cutting and making good the walls and floors wherever required.

Providing & fixing toilet paper holder of satin finish stainless steel AISI 316 grade wall mounted type fixed to wooden cleats with C.P brass screws comlete.

Providing, fixing, testing & commissioning of C.P. brass Jet Spray (Health faucet) with 8 mm dia, 1 metre long steel braided Flexible tube with wall hook etc complete.

Providing, fixing, testing and commissioning of 15 mm dia C.P. brass two way bib cock with C.P. wall flange of approved quality with requried accessories complete.

Providing, fixing, testing and commissioning of white viterous china semi stall flat back urinal supported by CI / MS bracket duly painted, including CP brass waste coupling with dome type grating, CP cast brass bottle trap with extension piece, wall flanges complete with all accessories as required.

Providing, fixing, testing and commissioning of automatic flushing systems for urinal to ensure pre-flush & flushing only immediately after use, comprising of all plumbing items. CP brass flush pipe with CP brass elbow, CP brass spreader, CP wall flange, and any other item required to provide satisfactory functioning. Including necessary wall cutting / chasing and making good, as required.

SITC of Urinal Partition

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work

25 mm dia nominal bore

50 mm dia nominal bore

Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :

25 to 40 mm nominal bore

50 to 80 mm nominal bore

Fixing water meter and stop cock in G.I. pipe line including cutting and threading the pipe and making long screws etc. complete (cost of water meter and stop cock to be paid separately).

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :

20 mm nominal bore

25 mm nominal bore

Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality :

25 mm dia nominal bore

50 mm dia nominal bore

Providing and filling sand of grading zone V or coarser grade, allround the G.I. pipes in external work :

25 mm dia nominal bore

50 mm dia nominal bore

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :

25 mm dia nominal bore

50 mm dia nominal bore

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore

Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 180x150 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Constructing brick masonry circular manhole 1.22 m internal dia at bottom and 0.56 m dia at top in cement mortar 1:4 (1 cement :4 coarse sand) inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement foundation concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design :

1.68 m deep with SFRC Cover and frame (heavy duty HD- 20 grade designation) 560 mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg. fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) :With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Extra depth for circular type manhole 1.22 m internal dia (at bottom) beyond 1.68 m to 2.29 m :With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Constructing brick masonry circular manhole 1.52 m internal dia at bottom and 0.56 m dia at top in cement mortar 1:4 (1 cement : 4 coarse sand) inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design :

2.30 m deep with SFRC Cover and frame (heavy duty HD- 20 grade designation) 560 mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg. fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) :With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Storage Unit with Glass Shutter Size : 2100mm X 600mm X 400MM (internal laminate and aluminium profit glass shutters, All carcass/Shelves -on HDHMR Board ,BSL 0.8mm Thick Laminate ;Glass Shutters - Frame made up of 45MM Alu. Profiles(Matt/Black/Alu.Matt/Rosegold/Champagne Colors) with TINTED BLACK/BROWN/CLEAR GLASS; Hinges - Soft Close Olive

Back Storage Unit: 760mm X 3150mm X 400mm all in laminate, All Carcass/Shelves -- on HDHMR Board, BSL 0.8 MM Thick Laminate; Laminated Shutters - 1MM Matt/SF ON HDHMR Boards (MERINOLAM/GREENLAM/CENTURYLAM/ADVACE LAMINATE) Hinges- Soft Close Olive; Handles price considered: Rs. 250/Pc

Side Storage Unit: 2550mm X 2700mm X400 mm (internal laminate and aluminium profile glass & Laminate shutters), All Carcass/shelves - on HDHMR Board, BSL 0.8 MM Thick Laminate; Glass Shutters - Frame made up of 45mm Alu. Profiles (Matt Black/Alu. Matt/Rosegold/Champagne colors) with TINTED BLACK/BROWN/CLEAR GLASS; Laminated Shutters - 1MM Matt/SF on HDHMR Boards (MERINOLAM/GREENLA/CENTURY LAM/ADVANCE LAMINATE) Hinges - Soft Close Olive; Handles price considered: Rs. 250/-Pc

Console Size: 1500mm X 825mm X 400mm all in laminate, All carcass/Shelves - on HDHMR Board, BSL 0.8MM Thick Laminate; Laminated Shutters - 1mm Matt/SF on HDHMR Boards (MERINOLAM/GREENLAM/CENTURY LAM/ADVANCE LAMINATE) Hinges - Soft Close Olive; Handles price considered: Rs. 250/Pc

T.V. Unit Size: 2575mm X 3000mm X 475mm all in laminate, All carcass/Shelves - on HDHMR Board, BSL 0.8MM Thick Laminate; Laminated Shutters - 1mm Matt/SF on HDHMR Boards (MERINOLAM/GREENLAM/CENTURY LAM/ADVANCE LAMINATE) Hinges - Soft Close Olive; Handles price considered: Rs. 250/Pc

Vanity Unit Size: 325mm X 1075mm X 600mm all in laminate, Carcass - on BOILO Board, BSL 0.72 MM Thick Laminate; Laminated Shutters - 1MM Matt/SF on HDHMR Boards (MERINOLAM/GREENLAM/CENTURY LAM/ADVANCE LAMINATE) Hinges - Soft Close HETTICH VEOSYS Hinges; Handles considered - BUILT - IN G/J PROFILE

Supply, Erection, Testing and Commisioining of cubicle type free standing, dust and vermin proof, busbar chambers, shell made of 14SWG CRCA sheet, doors made of 16SWG CRCA sheet with powder coating, Compartmentalised, modular type IP 55 Protection, with canopy, support clamps and angles frames as required as per the site condition. MAIN DISTRIBUTION PANEL consisting of the following. *Incomer - 160A FP MCCB - 01 No., 25kA with Thermal Magnetic Based Release (O/C, S/C) Protection, 3 x metering CT, MFM meter with RS-485, Phase Indicating Lamp, 1 x 6A MCB. *Bus Bar - 200A Aluminium *Outgoings - 1. 125A FP MCCB 02 Nos. Thermal Magnetic BasedRelease (O/C, S/C) Protection a) PDB b) Spare 2. 63A FP MCB 02 Nos a) Spare b) Spare 3. 32A DP MCB 02 Nos. a) Sapre b) Spare

Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed armoured and served cable 1100 volts grade as per IS:7098 (Part-1)1988 to be laid 1metre below ground level including excavation, sand cushioning, covering with sand & First Class bricks and back filling the trench etc., of the required size as per PWD General Specifications, in HUME pipe of required size at road crossing:-

Overall size 95sq.mm (3½ Core) Armoured (Underground)

Supply and erection of sheet metal double door vertical distribution boards IP 43-IK09 metal door (dust protected) as per IS:8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars for each phase, 2 Nos. shrouded neutral bars, 2Nos. earth bars, cement spill protector, color-coded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting MCCB's as incomer and outgoings SP/TP miniature circuit breakers in the distribution board as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc.:-

TP&N Double Door Vertical DB's 8 way each (With provision of FP MCCB 160amp.)

Supply and erection of Moulded Case Circuit Breaker (Panel mounting Cubical type) in the existing Cubical Panel (confirm to IEC:60947-2) having Ics=100% Icu, 100% neutral with spreader terminal links, Extended rotary handle and relevant PWD general specifications complete with G.I. Bolts, Nuts & Connection on both sides of MCCB with suitable size of thimbles etc:-

MCCB Four Pole 100amp., 415volts, ≥25kA Fixed Magnetic and Adjustable Thermal Setting

Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:

a. For Power load 63A TPN c. Spare 32 A TPN b. For light load 20A TPN c. Spare 32 A TPN

Supplying and fixing TP sheet steel enclosure on surface/ recess along with following rating 415 volts “C” curve TP MCB complete with connections, testing and commissioning etc. as required. Make: L&T/Schneider/ABB/Legrand

Triple pole and neutral 32A (Equipment side) a. For Kitchen, b. For Kitchen c. Spare d. Spare

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required

SITC PVC Sheathed FRLS insullation flexible copper cable

4c X 10 sq. mm Copper Amoured Cable

4c X 6 sq. mm Annealed Copper Cable flexible copper cable

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

3½ X 95 sq. mm (45mm)

4 X 6 sq. mm (19mm) for quipment

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

4 X 4 sq. mm + 2 X 4 sq. mm earth wire for Power Points & ACs

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire for Lighting circuit

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recesse medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.

Group C (Primary Point)

Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc as required.

Group C (Secondary Point)

Supplying and fixing suitable size GI box with modular plate and cover in FRLSont on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. (3Module for Power Points) Make: Panasonic/Legrand/Goldmedal/Havells/L&T

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.

6 Module (200mmX75mm)

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

5/6 amps switch

3 pin 5/6 A socket outlet

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.

Supplying and Laying of one number armoured OFC cable 6F Singlemode (OM3) loose tube (unitube) on the existing cable tray/surface including tie etc as reqd. Construction type should be PBT (Polybutylene, Terephthalate). Armouring type should be Corrugated Steel Tape Armour (ECCS Tape). Peripheral strength member should be two steel wires (0.9 mm dia) Commercial Standards should be ISO.IEC 11801 - 2nd Edition, type OM3;AS/ACIF S008; AS/NZS 3080 ; TIA/EIA 568.C.3; IEC-60793-1, 60793-2.

Supply, Installation, Testing and commisioning of 6 U Rack with cable managers,PDB, utility switches complete with all accessories

Supply, installation Testing and commisioning of distributed Network switches POE (24] port-cat-6 type, 10BASE-T/100BASE-TX/1000BASE-T, with gigabit interface 2/4 fibre optic port, SFP trans receiver module,POE based), rack mount, along with all the necessary fixing supports, patch cables, etc. with complete accessories.

Supply, Installation, Testing, Commissioning of 12 PORT LIU single mode, fully loaded with pigtails, adapter plates, blank plates, splicer tray, patch cords ,etc, duplex LC optical connectors with all the necessary enhanced sliding mechanism based on wheels, with all the necessary wiring, mouning brackets, fixing & support accessories,etc.

SITC of Fiber SFP of Alcatel Lucent make. As per approval of Network switched all switches will have 4 nos of SFP each will provided with 10G speed

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. , complete as required

Supply, installation Testing and commisioning of IP Indoor fixed dome camera, POE based (with maximum wattage of 5 watts per camera), 1/2.7 ” CMOS/ CCD Sensor, Resolution: 2 Megapixels (2048 x 1536) for color;1 Megapixel (1280 x 960) for B/W , Frame rate: CIF- 30 fps, VGA- 30 fps, Mega- 20 fps. H.264 and MJPEG stream, 1 lux colour/0.1 lux BW @ 1/60 sec, , Wide Dynamic Range, Duplex Bi-directional Audio Support, SDHC Memory Card Slot, Megapixel, Supported protocols: TCP/IP, HTTP, FTP,SMTP, DNS, NTP, SNMP,ONVIF Support along with all the necessary mounting brackets, fixing supports, poles, junction box, patch cables, etc. with complete accessories. (Note: vendor to specify the considered lens size) Compatible with HUS user version 5 Software Make:- Honeywell

Supply, installation Testing and commisioning of RJ-45 socket along with backbox, face plate and all other required accessories Outlet complete

Supply, installation Testing and commisioning of Cat-6 Patch cord 1 mtr. ( Rack Side)

Supply, installation Testing and commisioning of Cat-6 Patch cord 2 mtrs. ( Rack Side)

Supply, installation Testing and commisioning of 24 port Cat-6 patch panel, fully loaded, rack mount complete with I/O socket

Supply,laying, Testing and Commissioning of Cat-6 unarmoured Cable

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 1 or 2 module

Providing Structural Design Services ,GFC drawings, approval from client and further approval from structural consultant etc.

M/s KALRA ENTERPRISES