Renewal of Inspection road of Gulariya Dam, D/S side km. 0.000 to km. 1.190.

Amount

Earth work in filling for closing and repairing cuts and pot holes in service road, both side berm in all Types of soil mixed including all lead and lift T & P, dressing and compaction for proper completion of work.

Brick edging on both side of the road of brick class M-150, 8 cm wide and 12 cm deep laid with mud mortar including labour and supply of bricks finished to required template and in proper alignment and also including dressing and ramming the excavted earth as direction by the Enginner in charge of the work for proper completion of work.

WBM Grading- II Providing laying spreding and compaction stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness hand packing rolling with smooth wheeled roller 80-100 Kn in stages to proper grade and camber applying and brooming stone screening to fill up the intrestices of coarse aggregate watering and compacting to the required density Grading II as per MORD specification clause 405.

WBM Grading- III Providing laying spreding and compaction stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness hand packing rolling with smooth wheeled roller 80-100 Kn in stages to proper grade and camber applying and brooming stone screening to fill up the intrestices of coarse aggregate watering and compacting to the required density Grading III as per MORD specification clause 405.

Prime Coat (Slow Setting)-Providing and applying prime coat with bitumen emulsion of specified grade on the prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 Kg/sqm as per MORD specification.

Tack Coat-Providing and applying tack coat with bitumen (VG-10) using emulsion distribution at the rate of 0.30 Kg /sqm on the prepared bituminous/ granular base surface cleaned with mechanical broom. As per MORD specification

20mm thick Open-Graded Premix Carpet using Bituminous-Providing laying and rolling of open -graded premix surfacing of 20 mm thickness composed of speicified size aggregates either using penetration grade bitumen or cut -back or emulsion to serve as wearing course on a previosly prepared base including mixing in a hot mix plant transportation to the site laying with paver finisher to the required grade level and alignment and rolling with a smooth wheeled roller 80-100 kn capacity finished to required level and grades as per MORD specification.

Seal Coat- Providing and laying seal coat sealing the void in bitumionous surface laid to the specified levels gtades and cross fall using Type C seal coat (As per MORD Specified Clause 510)

D.V.R. CONSTRUCTION COMPANY

M/S RAM ASAREY PATEL

RAMDAS

M/s Gagan Enterprises

Shyam Lalit Dubey