CA No. GE (I) (AF) /SHL/ OF 2020-2021 SPECIAL REPAIRS TO BUILDING NO. S-08 AT HQ EAC (U), UNDER GE (I) (AF) SHILLONG

Amount

Note : All unserviceable materials obtained out of demolition/dismantling/taking down (other than those for which credit catered under Schedule of credit) shall be disposed of outside MoD Land. Quoted rates against respective item shall deemed to include for same.

B/R ITEMS Demolition of brick work/ block masonry or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles and removal all rubbish material complete all as specified directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings not exceeding 15 cm thickness below or above ground level and removal all rubbish material complete all as directed.

Demolition of unreinforced cement concrete in any position not otherwise specifically provided for and removal all rubbish material complete all as specified and directed.

Dismantling timber scantlings in framed work 40 Sqcm and over in section, in any position complete all as directed.

Dismantling of timber fillet, rails, post, rafters, purlins, etc. under 40 Sqcm in section unframed work complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed.

Taking down chowkats with shutters (without taking off shutters from the frames) & removing from site area n.exc 1.5 Sqm each complete all as specified and directed.

Taking down chowkats with shutters (without taking off shutters from the frames) & removing from site area exc 1.5 Sqm & n. exc 4.00 sqm each complete all as specified and directed.

Dismantling wrought iron, or mild steel work of any description not otherwise provided for complete all as directed.

Dismantling plain or corrugated steel sheeting/galvalume sheet any guage, thickness including Nainital or similar pattern roof covering,complete all as specified and directed

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as directed.

Dismantling of stone slabs and tiles in flooring, apron etc of any description or thickness laid, bedded and pointed in any mortar complete all as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Taking down cement or cement lime plaster any description, on brick or stone walls, etc. including raking out joints, hacking for key & scrubbing down with water, etc. & removing rubbish off the premises, complete all as directed.

Hacking out old broken glass (any thickness size quality or description) from wooden frames or stone concrete or brick surrounds, glazed with putty or fixed with beeds complete all as specified and directed.

Taking up or down steel tubing and connections alongwith bib tap, stop cocks and other fittings including cleaning for refixing or removal complete all as specified and directed :-

15mm bore.

20mm bore.

Dismantling of PVC(SWR) drain pipe of any bore alongwith fittings and accessories jointed in cement mortar and taking out from walls, floors or from trenches, if required complete all as specified and directed. (Note :- The length shall be measured along the centre line including fittings and accessoires).

Dismantling water tank of capacity exceeding 500 Ltrs but not exceeding 1000 Ltrs and removal from site complete all as specified and directed .

M&L for cement concrete type B1, 1:2:4 (using 20 mm graded stone aggregate) as in lintels upto 1.5m clear span, steps, seismic and other similar bands copping/cills, bed block for embedding hold fast etc including necessary form work weathering, slightly rounded or chamfered angles and throating complete all as directed .

M&L for pre-cast cement concrete block masonry 1:3:6 Type C-1 using 20mm graded stone aggregate with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6, complete all as specified and directed.

Supply only integral water proofing compound ISI marked as approved complete all as specified and directed.

Cutting opening through wall (old masonry built in cement mortar) for door, window and other openings (with or without reveals) or enlarging existing openings or cutting out defective masonry for under pinning including providing, fixing and removing, shoring, cleaning and stacking store and removing surplus to store and rubbish off the premises etc complete all as specified and directed.

M & L for second class hard wrought as in scantling framed and fixed complete all as specified and directed.

M & L for second class soft wood weather boarding, clean sawn, plain, 20 mm thick or feather edged 15 mm to 20 mm thick and fixed with 30 mm laps complete all as specified and directed.

S & F 100mm size brass handles cast type polished bright fixed with screws.complete all as specified and directed.

S & F in repairs continuous (Piano) hinges width of flaps (when open) 40mm, MS, bright finish or electro galvanised complete all as specified and directed.

S & F in repairs ball catches with 8mm dia steel ball and brass body and skirting plate including letting in and fixed complete all as specified and directed.

S & F in repairs of Chromium plated Knob (mini round handle) for drawer (of kitchen CB/books shelves) complete all as specified and directed.

S & F in repairs 100mm size brass mortice lock vertical type with 4 lever complete all as specified and directed.

S & F 140mm (overall length of cover plate), floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S & F in repairs aluminium (Die cast) body, door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg and fixed complete all as specified and directed.

M & L for framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed.

M & L for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc confirming to Fe 410-W(Gde E-250) quality 'A' complete all as specifed and directed.

S&F structural rolled mild steel Fe- 410-W(Gde E-250) quality 'A' as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats and other connecting plates etc complete all as specified and directed by Engineer-in-Charge.

Supply fabrication and fixing powder coated (Thickness of powder coating not less than 50 micron) anodized aluminium frame for doors, windows, ventilators with one or more rebates including jointing cleats for fixing etc complete all as specified and directed.

M & L double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel, heavy duty of size 125x240x60mm and fixed, complete all as specified and directed. Make : SANDHU/AMAR.

S & F in repairs powder coated aluminium grills for window/ ventilator solid mesh type not less than 3 Kg per Sqm area of approved pattern including edging with solid 'C' channel and fixing in position complete all as directed and specified.

S & F 12mm thick toughened glass sliding door alogwith necessary guide channels, rollers, including necessary one/two way spider with spider fin glazing system and with provision of stainless steel handles and necessary fittings complete all specified and directed.

M & L for 2 to 3mm thick Aluminium composite panel coloured sheet complete all as directed and specified.

S & F in repairs 6mm thick one face decorative veneered plywood, (5 ply), grade I (with BWR resin), fixed with screws to timber frame work/walls complete all as specified and directed.

S & F in repairs 18/19 mm thick Prelaminated particle, board, exterior grade, prelaminated one side with decorative choice laminations & other side balancing white lamination and alround covered with 6mm thick teak wood beading/lipping fixed with screwed to timber frame complete all as directed.

S & F for pre-painted galvalume aluminum zinc coating GI based trapizoidal profile steel sheet 0.50mm thick (overall) of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as per manufacturers instructions complete all as specified and directed.

S & F for pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick (overall) of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as per manufacturers instructions completed all as specified and directed.

Fixing only old serviceable pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet any thickness of any colour in roof covering/cladding to wall, fixed with self tapping screws or fixed with L-type or J-type or cranked hook bolts hook as per manufacturers instructions complete all as specified and directed.

M & L for providing and fixing suspended false ceiling make Armstrong ORCAL extra micro perforation or equivalent of size 600 x 600 x 15 mm ceilling tiles over suspension metal system (MICRO LOOK) designer grid (15 mm grid 8 mm return) SILHOUETTE XL 15 mm (NOMINAL) of Armstrong make complete index no. DUNE RH 99 (or equivalent of makes listed in List of makes) including necessary hanging arrangement as per manufactures instruction complete all as directed.

M & L for 25 mm thick PCC 1:2:4 type B-0, using 12.5 mm graded stone aggregate as in levelling course of floors, surfaces finished even and fair complete all as specified and directed.

M & L for 15 mm thick screed bed or bedding layer in cement mortar 1:4 for laying floor finishes complete all as specified and directed.

M & L for 15 mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes complete all as specified and directed.

M & L for non skid ceramic tiles (coloured) 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and as directed.

M & L for matt finish, joint less, coloured dark shade vitrified ceramic tiles (square/rectangular), 10 mm thick (Premium quality), area of each tiles not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match with shade of the tiles complete all as specified & directed

M & L 20 mm thick granite slab/tiles (of any type table rubbed and polished) in steps jambs pillars, window cills, cooking platforms and like set in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with complete all as specified and directed.

M & L for Pavement floor vitrified tiles of size exc 0.09 Sqm but not exc 0.36 Sqm 10mm thick (Endura tiles of Johnson or equivalent makes listed in List of Makes) set & jointed in neat cement slurry and pointed with grey cement and pigment to match the colour of tiles in floor complete all as specified and directed.

M & L for 75mm thick PCC 1:3:6 , type C-1 using 20 mm graded stone aggregate as in plinth protection laid in slope in 1:30 in alternative bays not exceeding 2 mtr in length. Exposed surfaces finished even and smooth without using extra cement including raking out joints between panel to panel and panel to wall and plugging the same with bitumen mastic using bitumen and sand mixture in 1:3 complete all as specified and directed.

M & L for rendering 10mm thick in cement mortar 1:3 on fair faces of brick or concrete surfaces finished even and rough for receiving wall tiles/dado complete all as specified and directed.

M & L for rendering 15 mm thick on fair faces of brick masonry/ concrete surface in CM (1:6), finished even and smooth without using extra cement complete all as specified and directed.

M & L for rendering 15 mm thick on fair faces of brick masonry/ concrete surface in CM 1:4, finished even and smooth without using extra cement complete all as specified and directed.

M & L for glazed ceramic tiles (coloured) 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as on vertical surfaces such as skirting or dado set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles complete all as specified and directed.

M & L for glazed ceramic tiles (coloured) 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as on vertical surfaces such as skirting or dado set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles complete all as specified and directed.

M & L for joint less, coloured dark shade vitrified ceramic tiles (square/rectangular), 10 mm thick (Premium quality), area of each tiles not exceeding 0.36 sqm, as on vertical surfaces such as skirting or dado set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles complete all as specified and directed.

S & F 5.50mm thick sheet glass ordinary quality and glazing with oil putty in squares exc 0.5 sq. m in each pane complete all specified and as directed.

M & L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of alkali resistant primer over a coat of 1mm thick wall care putty complete all as directed. (Make : For wall putty- Birla white/Bison wall putty of Berger/Narolac wall putty/Asian paint powder putty /Acro wall guard.)

Material and labour for preparation of newly plastered surfaces of wall, applying a coat of 1mm thick wall care putty and applying two coats of weather proof acrylic paint over one coat of exterior grade acrylic primer complete all as specified and directed. Make-Apex Ultima of Asian, weather shield MAX of ICI/Dulux, weather coat long life of Beger, Acroguard 3X of Acro paint.

M & L for preparation of new or previously untreated wooden or wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint of 1st grade quality over and including one coat of pink primer complete all as specified and directed.

M & L for French Polishing on new wooden or wood based surfaces of any description width or girth including cleaning and preparing the new surface including a coat of wood filler with two or more coats complete all as specified and directed.

M & L for preparation new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of 1st grade quality over and including one coat of red oxide zinc chrome primer complete all as specified and directed.

S&F steel water tubing, galvanized, medium grade, with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed for following sizes:-

15mm bore.

20mm bore.

S & F 40mm bore Unplasticised PVC pipe of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors complete all as directed.

S & F 15 mm bore two way Bib cock with wall flange cast copper alloy Chromium plated concealed type screwed down for iron pipe or for unions complete all as specified and directed. (Product Code & Make :- Cat Part No FLR-5041N of JAQUAR or equivalent model of other makes listed in list of makes)

S & F in repairs 15mm bore one way angular stop cock with wall flange cast copper alloy chromium plated, fancy type screwed for iron pipe or for union complete all as specified and directed. (Product Code & Make :- Cat Part No FLR-5053N of JAQUAR or equivalent model of other makes listed in list of makes)

S & F 15mm bore sink tap cast copper alloy fancy type chromium plated, spout with flange, screwed for iron pipe or for brass ferrule complete all as specified and directed. (Product Code & Make :- Cat Part No 8716 of PRAYAG or equivalent model of other makes listed in list of makes)

S & F in repairs 15mm bore central hole Basin mixture for mixing hot and cold water cast copper alloy chromium plated fancy type with 450mm long barided hoses complete all as specified and as directed. (Product Code & Make :- Cat Part No QQT-7169B of JAQUAR or equivalent model of other makes listed in list of makes)

S & F in repairs Hand Shower (Health Faucet) with 8mm dia 1 metre long flexible tube with wall hook complete all as specified and as directed. (Product Code & Make :- Cat Part No ALD-573 of JAQUAR or equivalent model of other makes listed in list of makes)

S & F in repairs Hand Shower 120mm dia round shape multiflow with cascade effect (ABS body chromium plated with grey face plate) with rubit cleaning system including 1.5 metre long easy flex tube in chrome finish with nuts complete all as specified and as directed. (Product Code & Make :- Cat Part No HSH-1731 for hand shower & Cat part No SHA-571 for tube of JAQUAR or equivalent model of other makes listed in list of makes)

S&F in repairs chromium plated toilet paper holder with stainless steel flap complete all as specified and directed. (Product Code & Make :- Cat Part No ACN-1153S of JAQUAR or equivalent model of other makes listed in list of makes).

S & F in repair Stainless steel Towel rack 600mm long with lower hangers, fixed to walls with brass screws complete all as specified and directed. (Product Code & Make :- Cat Part No ACN-1181S of JAQUAR or equivalent model of other makes listed in list of makes).

S & F in repairs chromium plated round towel ring including fixing with CP brass screws complete all as specified and directed. (Product Code & Make :- Cat Part No AQN-7721 of JAQUAR or equivalent model of other makes listed in list of makes).

S & F in repairs soap dish holder including fixing with CP brass screws complete all as specified and directed. (Product Code & Make :- Cat Part No ACN-1131N of JAQUAR or equivalent model of other makes listed in list of makes).

S & F in repairs sheet glass shelf assembly 60cm long fixed on wall with PVC rawl plug & cadmium plated brass screws complete all specified and as directed. (Product code & Make- Cat Part No ACN-1171N of JAGUAR or equivalent model of other makes listed in list of makes)

M & L for gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed of size 20mm dia complete all as specified and directed.

S & F PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed for following sizes:-

75mm bore

110mm bore

S & F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed for following sizes:-

110mm bore

S & F PVC (SWR) bend of any radius complete all as specified for following sizes:-

110mm bore

S & F PVC (SWR) 110mm branch piece, single (single Y) equal or unequal with oval access door complete all as specified and directed.

S & F in repairs PVC (SWR) floor trap 75mm dia outlet plain with Stainless steel grating including jointing with solvent cement including jointing to waste pipe fixed in cement concrete 1:2:4, type B-1 complete all as directed.

S & F in repairs glass shelf of size 45 Cm x 30 Cm of 12mm thick froted glass mounted on heavy duty brackets complete all as specified and directed.

S & F in repairs glass shelf of size 45 Cm x 34 Cm of 12mm thick froted glass mounted on heavy duty brackets complete all as specified and directed.

S & F in repairs 600mm long CP brass connection pipe with CP brass nuts on both ends for fixing to pipe or other fittings complete all as specified and directed.

S&F in repair single piece Suite white Vitreous china wash down water closet pan (pedestal pattern) with integral Vitreous china flushing vistern including plastic water closet seat and cover,complete all as specified and directed. (Product Code & Make :- Cat Part No C844A Qube of Parryware or equivalent model of other makes listed in list of makes).

S & F in repairs sink with drainage board made of stainless steel 1mm thick kitchen sink with plugs, washers and wastes, including bedding cement mortar on to dwarf wall or including fixing cantilever brackets and connecting unions to pipe, over all size 915mm x 460mm bowl size 410 x 330mm x 160mm, complete all as specified and as directed.

S & F in repair chromium plated 32mm size waste coupling, full threaded with height 80mm complete all as specified and directed. (Product Code & Make :- Cat Part No ALD-705 of JAQUAR or equivalent model of other makes listed in list of makes).

S & F in repair chromium plated 32mm size bottle trap (with internal partition) with 300mm & 190mm long wall connection pipes & wall flange complete all as specified and directed. (Product Code & Make :- Cat Part No ALD-769L300x190 of JAQUAR or equivalent model of other makes listed in list of makes).

S & F 1000 litres capacity rotational moulded HDPE water storage tank tripple layer (Cylinderical vertical with closed top) hoisted and fixed in position complete all as specified and as directed. Note : PVC tanks shall be ISI marked and having two layers.

E/M ITEMS Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete from existing conduits, from PVC Casing/capping with all fittings, such as switches, ceiling rose, pendants, sockets, lamp holder, fan regulators, sketch/brackets light fittings (except tube light fitting) etc and removal of old material from site (except switches, sockets and fittings to be reused) and making good disturbed surfaces of walls, floors ceiling etc complete all as specified and directed to match with existing surfaces.

Taking down main switch/DB’s including MCB’s with board and fixture of any description and making good disturbed surface of walls etc complete all as directed.

Taking down old tube light fittings/light fittings/security lights any type and removal of old light fittings from site (except light fittings to be reused) and making good disturbed surfaces of walls, ceiling etc complete all as specified and directed to match with existing surfaces.

Taking down the existing unserviceable submain/service connection wiring any size and any description including conduits all as directed.

M & L for point wiring complete with 1.5 Sqmm single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLS-H cable drawn through and including PVC rigid non metallic conduit (minimum 20mm bore size) and conduit accessories concealed in walls/ceiling/floors all as per IS, including 1.5 Sqmm single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLS-H green colour cable as earth continuity conductor to common earth & connecting to earth dolly for the following :- (Note : The rate quoted shall deemed to include for cutting chases for concealing PVC conduit and making good disturbed surfaces. )

One light point/fan point controlled by one, one way switch.

One bell point controlled by one bell push

One 5 Amps socket outlet/switch socket outlet on same board with other switches.

M & L for point wiring complete for 5 Amps socket outlet on independent board with 2.5 Sqmm single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLS-H cable drawn through and including PVC rigid non metallic conduit (minimum 20mm bore size) and conduit accessories concealed in walls/ceiling/floors all as per IS, including 2.5 Sqmm single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLS-H green colour cable as earth continuity conductor to common earth & connecting to earth dolly. Notes : The rate quoted shall deemed to include for cutting chases for concealing PVC conduit and making good disturbed surfaces.

M & L for point wiring complete for 15 Amps socket outlet on independent board with 4 Sqmm single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLS-H cable drawn through and including PVC rigid non metallic conduit (minimum 20mm bore size) and conduit accessories concealed in walls/ceiling/floors all as per IS, including 4 Sqmm single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLS-H green colour cable as earth continuity conductor to common earth & connecting to earth dolly. Notes : The rate quoted shall deemed to include for cutting chases for concealing PVC conduit and making good disturbed surfaces.

M & L for modular metal flush box for the following modules :-

3 Module

4 Module

6 Module

M & L for modular white cover plate with frame for the following modules :-

3 Module

4 Module

6 Module

S & F modular switch, 1 way 6A, 240 Volts, 1 module complete all as specified and directed.

S & F modular bell push, 1 way 6A, 240 Volts, 1 module complete all as specified and directed.

S & F modular switch, 1 way 16A 240 Volts, 1 module complete all as specified and directed.

S & F, modular socket outlet for two and three pin combined, 6 Amp, 240 Volts, 2 Module type complete all as specified & directed.

S & F, modular socket outlet for two in one, three pin combined, 6 & 16 Amp, 240 Volts, 2 Module type complete all as specified & directed.

S & F bell Ding-dong type, AC, 230 Volts, single pole complete all as specified & directed.

S & F lamp holder, PVC / polycarbonate type with back plate suitable for Angle fittings complete all as specified and directed.

S & F ceiling rose, three terminal, PVC / poly carbonate isolated body, complete all as specified and directed.

S & F sheet metal enclosure double door DB SPN 12 way, 240 volts protection class IP-43- IK 09 made out of CRCA mild steel sheet surface with epoxy powder coated surface confirming to IS-13032, IS 8623, BS-5484 with tinned copper bus bar of 200 Amps capacity all as specified and directed. {Model/Make : Cat Part No 5076 12 of make Legrand or equivalent model of makes listed in List makes}. (Note: MCBs shall be measured and paid separately)

S & F sheet metal enclosure vertical type double door DB TPN 8 way suitable to accomodate MCCB FP, 415 volts upto 160 Amps rating, protection class IP-54 IK-09 made out of CRCA mild steel sheet surface with insulated material like polyester with epoxy powder coated surface mounted as per IEC 61439-3, with copper bus bar of 250 Amps capacity for each phase, with two neutral bars, two Earth bars and cable ties for cable managementall as specified and as approved by Engineer-in-Charge. {Model/Make : Cat Part No 5077 52 of make Legrand or equivalent model of makes listed in List makes}. (Note: MCCB & MCBs shall be measured and paid separately)

S & F MCB SP 6 to 32 Amps, 240 volts, B-curve, rupturing capacity 10KA conforming to IEC-60898, Part-I complete, all as specified & directed.

S & F MCB SPN 40 Amps, 240 volts, B-curve, rupturing capacity 10KA conforming to IEC-60898, Part-I, complete, all as specified & directed.

S & F MCCB four pole 160 Amp confirming to IEC 60947-2 & IS – 13947-3 thermal magnetic release and adjustable over load setting 0.8 – 1.0 x In and adjustable short circuit setting 6 – 10 x In and rupturing capacity 35 KA at 415 V AC , 50 Hz complete, all as specified & directed.

S & F for submain wiring with 2 single core PVC insulated & PVC unsheathed FRLS-H cable 1100 Volt grade with 4 Sqmm copper multistranded conductor drawn through and including PVC conduit 20mm bore concealed in walls/ceilings/roofs including 4 Sqmm single core multistranded copper conductor 1100 volts grade PVC insulated and unsheathed FRLS-H cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed. Note: - (i) Two runs of main cable, one run of earth continuity conductor and one run of conduit will be measured and paid as one length only. (ii) The rate quoted shall deemed to include for cutting chases for concealing PVC conduit and making good disturbed surfaces.

S & F high efficiency LED recess mounted light fittings, 36 Watt, 5700K, 605 x 605mm size, with super bright LEDs with highly efficient light smoothing optics, flat panel suitable for ceiling/POP utilisations with all accessories and fixing arrangements complete all as specified and directed. {Model/Make : Cat Part No LCPL-36-CDL of make Crompton or equivalent model of makes listed in List makes}.

Supply and fix LED 5700k integrated batten tube light, 36 Watt 230 V, 50 Hz with with all standard fittings etc pre-wired and connecting the fitting from ceiling rose/connector using copper flexible cord of size 1.5sqmm, 3 core of suitable length complete all as specified and directed. {Model/Make : Cat Part No LDL-36-CDL of make Crompton or equivalent model of makes listed in List makes}.

Supply and fix 18 watt LED Downlighter with aluminium housing with bracket and clamp for wall mounting arrangments and connecting the fitting using copper flexible cord of size 1.5sqmm, 3 core of suitable length complete all as specified and directed. {Model/Make : Cat Part No. LCDN-18-CDL/TL/WW of make Crompton or equivalent model of makes listed in List makes}.

Supply and fix LED Security light made up of pressure die cast aluminium housing with high power LED, 30 watt as lighting source and lens embeded PC cover with IP66 protection and impect resistance of IK07 with bracket and clamp for wall mounting arrangments and connecting the fitting using copper flexible cord of size 1.5sqmm, 3 core of suitable length complete all as specified and directed. {Model/Make : Model FREEDOM+ Cat Part No. LSTS-30-CDL of make Crompton or equivalent model of makes listed in List makes}.

Fixing only serviciable spot light fitting/ recess mounted light fittings, 605 x 605mm size and connecting the fitting using copper flexible cord of size 1.5sqmm, 3 core of suitable length complete all as specified and directed.

S & F exhaust fan of 150mm sweep, metal body, heavy duty, 2800 RPM, 38 watt, 3 blades, air delivery 400 m3/h, suitable for SP 230/250 Volts, 50 Hz AC supply complete with sturdy steel bird guard including fixing/ grouting of frame & guard in wall & connecting with and including 3 Nos 1.5 Sqmm single core, PVC insulated but unsheathed FRLS 1100 Volts grade cable with multistranded copper conductor from ceiling rose to fan complete all as directed. Model & Make : Model Ventilair DS of make Havells or equivalent model of Make Bajaj/ Crompton/Usha/Orient

R K CONSTRUCTION

M/s Gupta Construction

Mathews Construction