REPAIR MAINTENANCE OF EXTERNAL ELECTRIFICATION AT OTM AND MD ACCN AND REPAIR MAINTAINCE OF STREET LIGHT DG SETS AND GARDEN LIGHTS AT GHATKOPAR AND VIKHROLI UNDER GE (NORTH) SANTACRUZ, MUMBAI

Amount

Excavation in trenches, not exceeding 1.50 m wide and not exceeding 1.5 m in depth, for foundation, laying of cables/pipes etc and getting out in hard/dense soil complete all as specified and as directed by Engineer-in-Charge.

Returning, filling in including spreading, levelling, watering and well ramming in layers, not exceeding 25cm in soil complete all as specified and as directed by Engineer-in-Charge.

Removing excavated material to a distance, not exceeding 50 m and depositing where directed, at a level not exceeding 1.5 mtr above the starting point complete all as specified and as directed by Engineer-in-Charge

Supply and lay double wall corrugated (DWC) HDPE pipe 63mm outer dia , as per IS-16205 including couplers and bend for cable protection laid in trenches etc complete all as specified and as directed by Engineer-in-Charge Make : TELEREX 450N/ Rex Polyextrusion Ltd/ Finolex/ Prince Pipes and fittings ltd/Kisan/Supreme/JAIN IRRIGATION SYS/ Astral

Supplying, laying,connecting, testing & commissioning LT UG XLPE insulated, heavy duty, 1100 V grade electric cable with aluminium conductor, served with an inner sheathing of PVC tape, armoured with galvanised steel wire or tape and overall PVC sheathed of size 50 Sqmm x 3.5 core, laid in trenches or passing through pipe or fixed to wall, making all connections with and including provision of necessary glands, lugs, bushing etc as required including taking down old unserviceable cable complete all as specified and as directed by Engineer-in-Charge of following sizes:- Note : Earthwork excavation, DWC/GI pipe for cable protection shall be measured and paid separately in their respective items Make: Cable Corporation of India (CCI)/ Asian Cable Co, Chattisgarh/ Finolex/ Polycab/ Gloster/Universal/ RPG Cables Ltd , Thane/ Havells India Ltd/ RR Kabel/ KEI Industries Ltd(KEI)

-do- same as Item no. 5 above but of size 70 Sqmm 3.5 Core

-do- same as Item no. 5 above but of size 120 Sqmm 3.5 Core

-do- same as Item no. 5 above but of size 25 Sqmm 3.5 Core

-do- same as Item no. 5 above but of size 16 Sqmm 4.0 Core

-do- same as Item no. 5 above but of size 10 Sqmm 2.0 Core

-do- same as Item no. 5 above but of size 10 Sqmm 4.0 Core

Material & labour for earthing, complete with galvanised steel earth plate electrode 600x600x6 mm thick buried directly in ground with top edge of the plate not less than 1.5mtr below the normal ground level connected to using galvanised earthing lead wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron. Earth strip connected to main switch board or main control board as directed and as specified and shown in electrical plate No. 3 of SSR Part I (2009) including necessary concrete pit in PCC (1:3:6) type C1, cover slab with one handle for lifting, funnel, wire mesh, 20mm dia GI pipe light grade for watering, 15mm dia light grade GI protection pipe ,charcoal or coke, 20kg of benjonite powder and salt in alternate layers including necessary excavation and earth work in any type of soil and testing including taking down old unserviceable earthing materials complete all as directed by Engineer-in-Charge.

-do- same as Item no. 12 above but strip 32 x6 mm as earthing lead

Supply and fix GI strip 32mmX6 mm buried in ground/on wall, extension of existing earthing lead complete all as per specified and directed by Engineer - in - charge.

Material and labour for cutting the existing Bitumen Road /hard standing to size not exceeding 45cm wide and depth not less than 45cm for passing of UG cable through GI pipe and making good the disturbed surface filled with excavated material and top 200mm depth with plain cement concrete 1:3:6 type C1 using 20mm graded aggregate complete all as specified and directed.

Supply and fix galvanised iron pipe, medium grade, 80mm bore for laying cable protection on wall, trenches, road crossings etc. with suitable size of GI saddle,clamps, nut & bolts wherever necessary complete all as specified and as directed by Engineer-in-Charge. Make: TATA/SWASTIK/JINDAL/Bharat Steel tube/ZENITH/Indian Tube Company

Material & Labour for painting the old Main LT panel board including scrapping and removing the old painted surfaces and painting /matching the same colour paint with two coats of super enameled paint ( Smoke grey) and without distrubing the existing electric system all as specified and directed by Engineer-in-Charge. Make : Asian Paints/ Nerolac Paints/ Dulux ( Akzonobel)/ Nippon Paint India Pvt Ltd

Supplying, installing, testing and commissioning LT feeder pillar box of suitable size factory made outdoor type, dust and vermin proof, double door, cubical and compartmentalized type, 415 volts, AC, 50 Hz, fabricated with 3.15 mm thick CRCA sheet complete with and including mounted on angle iron frame stand of size 50 x 50 x 6 mm thick, 50 cm long leg, grouted in PCC (1:2:4) type B1 (using 20 mm graded stone aggregate), spray painted inside and outside, powder coated of approved colour by Engineer-in-Charge, enclosed bus bar chamber with aluminium bus bar of size 40x10mm for phases and neutral (04 Nos of rating capacity 300 Amps), mounted on PVC insulators, electric connection complete with from MCCB to main bus bar, cable glands, thimble complete with and including openable shutters butt hinged, locking arrangement complete electrically inter connected with Aluminium strips of suitable size for all incoming and outgoing MCCBs and accessories with fixing arrangement on PCC (1:3:6) type C-2 bed block with studs, bolts, nuts & washers, Danger notice board with scull suitable for 415 volts or required size to be fixed on Pannel and consisting of the following accessories including dismantling of old panel all as directed. (a) Panel shall be Manufactured from CPRI approved manufacturer (b) Contractor shall submit the drawings of panels for approval before fabrication in factory c)Drawing for Feeder pillar box shall be first approval by Engr-in-Charge

Incoming- (a) MCCB 4 pole ,36 KA, 415 Volts, 350 Amps , with thermal adjustable and fixed magnetic setting with extended terminals - 01 No (b) Bus bar with aluminium strip with heat shrinkable insulating sleeve size 50x10mm - 4 nos of required length supported on FRP insulators with 2.5 Sqmm copper cable single core (c) Digital multifunction meter of class I-1 nos Make:- L&T Model:4400 LED series or equivalent in Siemens/Schneider d) CT coil of ratio 200/5 Amps .-03 Nos e) LED type indicator lamps RYB-01 set Outgoing :- (a) MCCB 4 pole ,16 KA, 415 Volts,50 Hz, 100 Amps , with thermal adjustable and fixed magnetic setting with extended terminals - 03 Nos (b) MCCB 4 pole ,16 KA, 415 Volts,50 Hz, 63 Amps , with thermal adjustable and fixed magnetic setting with extended terminals - 03 Nos (c) MCCB 4 pole ,16 KA, 415 Volts,50 Hz, 32 Amps , with thermal adjustable and fixed magnetic setting with extended terminals - 01 No(spare) Make of MCCB: Larsen &Toubro/ ABB/ Siemens/ Schneider/ Havells/ Legrand/ Indo ASIAN/ C & S Electric/ Bhartia Cuttler Hammer (BCH) Make-L&T / Automatic Electrical (AE)/ Havells/ Enercon/ Secure Meter

Material and labour for welding broken doors of LT Panels (front and rear door) including replacing the required new hinges, nuts and bolts, locking arrangement and refixing the covers without disturbing the existing electric system complete all as specified and directed by Engr-in-Charge..

Supplying, installing, testing and commissioning LT feeder pillar box of suitable size factory made outdoor type, dust and vermin proof, double door, cubical and compartmentalized type, 415 volts, AC, 50 Hz, fabricated with 3.15 mm thick CRCA sheet complete with and including mounted on angle iron frame stand of size 50 x 50 x 6 mm thick, 50 cm long leg, grouted in PCC (1:2:4) type B1 (using 20 mm graded stone aggregate), spray painted inside and outside, powder coated of approved colour by Engineer-in-Charge, enclosed bus bar chamber with aluminium bus bar of size 40x10mm for phases and neutral (04 Nos of rating capacity 300 Amps), mounted on PVC insulators, electric connection complete with from MCCB to main bus bar, cable glands, thimble complete with and including openable shutters butt hinged, locking arrangement complete electrically inter connected with Aluminium strips of suitable size for all incoming and outgoing MCCBs and accessories with fixing arrangement on PCC (1:3:6) type C-2 bed block with studs, bolts, nuts & washers, Danger notice board with scull suitable for 415 volts or required size to be fixed on Pannel and consisting of the following accessories including taking down of old rusted feeder pillar box and supply and fix st P2 bldg 1st wing , Vikhroli all as directed. (a) Panel shall be Manufactured from CPRI approved manufacturer (b) Contractor shall submit the drawings of panels for approval before fabrication in factory c)Drawing for Feeder pillar box shall be first approval by Engr-in-Charge

Incoming- (a) MCCB 4 pole ,50 KA, 415 Volts, 630 Amps , with thermal adjustable and fixed magnetic setting with extended terminals - 01 No (b) Bus bar with 800 Amps aluminium strip with heat shrinkable insulating sleeve size 80x10mm - 4 nos of required length supported on FRP insulators with 2.5 Sqmm copper cable single core (c) Digital multifunction meter of class I-1 nos Make:- L&T Model:4400 LED series or equivalent in Siemens/Schneider d) CT coil of ratio 200/5 Amps .-03 Nos e) LED type indicator lamps RYB-01 set Outgoing :- (a) MCCB 4 pole ,36 KA, 415 Volts,50 Hz, 350 Amps , with thermal adjustable and fixed magnetic setting with extended terminals - 01 No (b) MCCB 4 pole ,36 KA, 415 Volts,50 Hz, 200 Amps , with thermal adjustable and fixed magnetic setting with extended terminals - 03 Nos (c) MCCB 4 pole ,36 KA, 415 Volts,50 Hz, 160 Amps , with thermal adjustable and fixed magnetic setting with extended terminals - 02 No (d) MCCB 3 pole ,16 KA, 415 Volts,50 Hz, 100 Amps , with thermal adjustable and fixed magnetic setting with extended terminals - 06 Nos (c) MCCB 3 pole ,16 KA, 415 Volts,50 Hz, 63 Amps , with thermal adjustable and fixed magnetic setting with extended terminals - 03 Nos Make of MCCB: Larsen &Toubro/ ABB/ Siemens/ Schneider/ Havells/ Legrand/ Indo ASIAN/ C & S Electric/ Bhartia Cuttler Hammer (BCH) Make-L&T / Automatic Electrical (AE)/ Havells/ Enercon/ Secure Meter

Material and labour for undusting & cleaning of feeder pillars & LT panel with dry, lint-free cloth or a soft brush to eliminate dust, dirt, and debris from the panel's surface externally & internally comaprtment wise along with replacing of any unservceable MCCB/ Lugs/ Cables, refixing loose wires/ cables, redistrbution of load for balanced distribution, painting corroded areas, including cleaning of vegatation/plants around Feeder pillars and writing respective Fedder pillar Numbers,complete all as specified and directed by engineer Incharge. Note : MCCB/ Timer/ Cables will be paid and measured seperately.

Supply & Fix in repair DB vertical type 4 way TPN , double door load line powder coated complete alongwith 200 Amp rated Bus bar fixed on wall duly grouted in solid block wall or on wooden board,including MCB TPN 100 Amps incoming and 12 Nos of MCB SP of 40 Amp outgoing with lugs/thimbles duly crimped for connection with all necessary fixing arrangement complete all as specified and directed. Note: Thimble/lugs of rating of MCCB should be used with wire for fixing in the MCB. Make : Havells / Legrand / Schneider / MDS sample as approved by GE.

Supply and fix in repairs of Voltmeter, 0 to 500 Volts, AC, suitable for three phase, digital type all as directed. Make: AE/Schneider/L&T

Supply and fix in repairs of Ammeter, digital type, 0-300 Amps, AC CT operated, suitable for three phase all as directed. Make: AE/ Schneider/ L&T

Supply and fix outdoor 1.1 KV LT XLPE cable Heat Shrink staright through jointing kit of cable size 95 Sqmm including cable finding cable fault complete all as specified and as directed by Engineer-In-Charge. Make: Densons/ M Seal/ Raychem/ Siemens / Birla 3M/ Mahindra & Mahindra

Supply and fix outdoor 1.1 KV LT XLPE cable Heat Shrink staright through jointing kit of cable size 120-185 Sqmm including cable finding cable fault complete all as specified and as directed by Engineer-In-Charge. Make: Densons/ M Seal/ Raychem/ Siemens / Birla 3M/ Mahindra & Mahindra

S&F LED Street light Celesta 40W, warm white with automatic brightening from 25% to 100% of rated wattage on sensing of movement/ occupancy, antiquely designed aesthetically appealing landscape cum street light, made from aluminium housing, clear polymer diffuser to provide uniform and pleasant light output including necessary earth work anf formwork , cement concrete in foundation and coping of poles, fair finishing to exposed surfaces of concrete all as specified and as directed by Engr-in-charge. Make- Shakti cat part no-SZPSCPD040-iSS or equivalent in Bajaj/Havells/Philips

Material and labour for complete removal of existing paint of steel tubular / rail poles length up to 9 mtr including preparation of outer surface and applying two coats of aluminium paint over a coat of red oxide and two strip of yellow and black colour paint of size 30 cm width from bottom of pole height 30 cm, including numbering to pole with base paint of yellow colour and Black for numbering, not be less than 100 mm in height and 10 mm in width complete all as specified and as directed by Engineer-in-Charge Make- Asian Paints/ Nerolac Paints/ Dulux ( Akzonobel)/ Nippon Paint India Pvt Ltd

Material and labour for shifting of LT panel after dismantling of all electrical connection and carrying it to the new location, refixing it after making suitable size hole in wall, making electrical connections, installation testing, commissioning and making good the disturbed surface to match with the existing surfaces complete all as specified and as directed by Engineer-in-Charge

Supply and fix aluminium thimble (Lugs) in replacement suitable for Cable of size upto 185sqmm, including taking down burnt / unserviceable lugs from the LT Panel board complete all as specified and directed by Engr-in-Charge. Make : Dowells

Supply & Fix in repairs micro controller based APFC control relay/ Reactive power manager to connect minimum 12 capacitor banks for automatic control of capacitor banks in 3 Phase 4 wire, 50 HZ supply LT Panel with target PF setting, LED operational indicators, Parameter display ( PF, KVAR, Capacitor bank values, CT ratio etc) and alarm signal for CT polarity reversal, Over Voltage etc complete with all necessary fixing arrangements complete all as specified and as directed by Engineer-In-Charge. Make : L & T Model : RPM-14 Cap pat No : MRPM1400000 or equivalent in Scheinder/ Siemens

M&L including taking down for Cross arm, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending, cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint complete all as specified and as directed by Engr-in-charge.

Supply & Fix in repairs 3 phase, 50 HZ multi function meter class -I, to measure and display voltage, current, Frequency & Power factor with Class I Accuracy complete with all necessary fixing arrangements complete all as specified and as directed by Engineer-In-Charge. Make : L & T Model : RPM-14 Cap pat No : MRPM1400000 or equivalent in Scheinder/ Seimens

Supply and fix in repair 3 core PVC insulated and unsheathed, unarmoured, multistranded, copper conductor cable of size 1.5 Sqmm, 1100 Volts grade for AC connection etc complete all as specified and as directed by Engineer-in-Charge. Make- Plaza, Finolex, Havells, Polycab

Supply and lay double wall corrugated (DWC) HDPE pipe 40mm outer dia , as per IS-16205 including couplers and bend for cable protection laid in trenches etc complete all as specified and as directed by Engineer-in-Charge Make : TELEREX 450N/ Rex Polyextrusion Ltd/ Finolex/ Prince Pipes and fittings ltd/Kisan/Supreme/JAIN IRRIGATION SYS/ Astral

Supply and fix galvanised iron pipe, medium grade, 50mm bore for laying cable protection on wall, trenches, road crossings etc. with suitable size of GI saddle,clamps, nut & bolts wherever necessary complete all as specified and as directed by Engineer-in-Charge. Make: TATA/SWASTIK/JINDAL/Bharat Steel tube/ZENITH/Indian Tube Company

Supply & Fix in repairs SMC/ FRP Cable Junction box side hinged type with inside dimensions 240x130x95 mm in size, with pole mounting arrangement for outdoor installation suitable for 3 Phase 4 core wire incoming including 6 Amp SP MCB complete all as directed and specified by Engineer In Charge. Make: Sintex model: GSJB-2817 or equivalent model in Hensel/ National

Supply and fixing LED street light fitting 70 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed by Engineer-in-Charge. Make : Philips Model No. BRP410 or equivalent in Havells/Bajaj

Supply and fixing LED flood light 100 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp. complete all as specified and as directed by Engineer-in-Charge. Make : Philips Cat Pat No. BVP141 LED100 CW FG GR PSU or equivalent in OSRAM/CROMPTON.

Supply and fixing post top lantern LED type 35/40 watt 230 watt volts AC outdoor type with decorative post top, IP 65 protection with impact and corrosion resistant complete with driver and lamp including necessary fixing arrangements such as GI Pipe, PCC complete all as specified and as directed by Engineer-in-Charge. Make : Philips Cat Pat No : BGP300 LED40 757 PSU PC IN S1 or equivalent in Havells/Bajaj.

Supply and fixing LED Bollard light Fitting aluminium landscape luminaire for diffused lighting, suitable for B22 LED bub of 9W, 600mm length, IP65 protected, electrically connecting up with cable, including necessary earth work and form work, cement concrete in coping of poles, fair finishing to exposed faces of concrete etc,complete all as specified and as directed by Engineer-in-Charge. Make : Shakthi Cat part No. SZPGBMX009-C or equivalent in Crompton / Havells / Philips

Supply & Fix in repairs digital timer programmable switch, 230 Volt with single phase rating including necessary connecting cables complete all as specified and as directed by Engineer-in-Charge. Make : L&T/ Schneider/ Seimens

Supply & Fix in repairs ML-2 Contactor, 3 pole, 50 HZ for street lightning along with necessary fixing arrangements complete all as specified and as directed by Engineer-in-Charge. Make : L&T/ Schneider/ Seimens

Material & Labour for PVC insulated twin core aluminum stranded conductor round/flat cable size 6 Sqmm 1100 Volts grade served with an sheathing of PVC tape and overall PVC sheathed in service connection suspended by insulating hangers not more than 1 mtr apart including taking down old unserviceable cable complete all as specified and as directed by Engineer-in-Charge Make: Cable Corporation of India (CCI)/ Asian Cable Co, Chattisgarh/ Finolex/ Polycab/ Gloster/Universal/ RPG Cables Ltd , Thane/ Havells India Ltd/ RR Kabel/ KEI Industries Ltd(KEI)

Supply and fix IP 65 Weather Proof / Water Proof Rating outdoor usuage decorative Tricolour LED Strip with Amber, White and Green with necessary fixing arrangement to be fitted on Street Lights Poles/ war trophy complete all as specified and directed by engineer In Charge Make : Philips/ Osram Ledvance/ Havells

S&F LED Wall light 10W, aesthetically designed with multiple body colour option, high efficiency LED, opaque diffuser, inbuilt driver, suitable for highlighting wall hangings complete all as specified and as directed by Engr-in-charge.Make- Shakti cat part no- SZWPFPX010 or equivalent in Philips/Bajaj/Havells

Dismantling the unserviceable alternators of 40 KVA DG set and repairing with replacement of defective spares, such as carbon brushes, carbon spring, bearing, bushes, defective wiring and solidering after repair, reassembling and refixing at site complete as directed including testing on completion.

Carry out 'B' check kit from authorised rep or service engineer from the manufacturer of DG set of 40 KVA capacity. Make: Kirloskar (including the cost of the following spares all as per manufacturers instructions and directed by Engineer in charge.)(a) S&F in repair by pass filter (b) S&F Lubo oil filter (c) S&F in repair fuel filter (d) Checking of hydraulic governer (e) checking and topping up of coolant (f) S & F air cleaner element complete (g) Any other checking as per manufacturer instruction

Dismantling of old and unsv lub oil from the sump of DG sets and filling of new lub oil 20w40 upto required level.Note: The old and unsv oil shall be the property of the contractor and necessary credit shall be added.

Dismantling of starter repairing and refixing the same all as per manufacturers instructions and directed by Engineer in charge.

S & F fan belt for 40 KVA capacity DG Set including dismantling the existing one all as directed.

S & F of flexible fuel/oil pressure pipe of exiting size and length upto 1.5 mtrs and connecting complete suitable for DG set of 40 KVA.

Note: Deduct Credit for demolished / dismantled material of Rs. (-) 45,935.00 (Minus) as listed in Schedule of Credit. Tenderers will not quote against this item being a tentative amount to be considered to arrive at the 'Contract Sum'

EVEREST POWER CONTROL ENGINEERS (BID ID -3504353)