Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹17.8 LAccepted-AOC | 1 | Accepted-AOC accept | |
| 2 | 2₹19.4 L+₹1.4 L (7.72%)Rejected-AOC | 2 | Rejected-AOC reject | |
| 3 | 3₹22.0 L+₹4.0 L (22.4%)Rejected-AOC 00 INFRONT OF S R K PG COLLEGE KOTLA ROAD OM MARKET FIROZABAD UTTAR PRADESH 283203 | FIROZABAD | UTTAR PRADESH | 283203 | 3 | Rejected-AOC reject | |
| 4 | 4₹22.9 L+₹5.0 L (27.6%)Rejected-AOC | 4 | Rejected-AOC reject |
Tender Value
₹18 L
EMD Value
₹18,000
Closing Date
6 Apr 2024, 12:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
SE EWC
Opposite Circuit House, Katju Marg, Bareilly
Increasing Capacity of 33/11 KV SubStations Nagarjuna Zarifnagar and Installation of Additional 5 MVA transformer in 33/11 KV SubStation Bisauli Rural under EDC Badaun
2024_MVVNL_920196_1
96/EWC(B)/2023-24
Open Tender
Electrical Works
Item Rate
30 days
BADAUN
AS PER TENDER DOCUMENTS
3 documents required · 3 mandatory
₹3,540
SE EWC
₹18,000
7 Dec 2024
23 Mar 2024
6 Apr 2024
23 Mar 2024
6 Apr 2024
23 Mar 2024
Amount
Part - (A) INCREASING CAPACITY OF 33/11KV S/S Bisauli Rural FOR ADDITIONAL 5 MVA T/F
Loading, unloading and safe carriage of the following materials from any Electy. Store Center of any Electricity store division/center of Bareilly zone.
M.S. Channel 125x65mm
MS Channel 100x50x2028mm (For top channel & fuse set)
M.S.Angle 75x75x8mm
M.S angle lron 65x65x6mm, 2700mm long
MS Angles 50x50x6mm
33 KV Post insulator
33 KV Lightening Arrestor
33 KV 400 A Bus Isolator
33 KV VCB 800A 750 MVA
Control pannel I/C for 33 KV Single T/F
33 kv O/D CT CTR 200/100/1
11 KV VCB I/C CTR 600/300/5A
11 KV VCB O/G CTR 200/100/5A
11 KV Bus coupler
33 KV PT 33KV/110V
11 KV 3x300 mm2 XLPE Cable
11 KV 3x185 mm2 XLPE Cable
11 KV Cable jointing Kit
PCC Pole 8.5m long.
Earthing Complete
11KV Disc Insulator B&S 45 KN
11 KV Disc fitting
fuse set
DC supply system with one no. float cum boost charger & 01 battery set for 24V. DC supply system with 200A.H. battery capacity with cabnet
Cost of ACSR Dog conductor
Earthing of indoor & outdoor equipments of Sub-Station after proper welding of joints and painting of earth strip above soil with proper clamp etc. as per RESPO approved drawing & resistance of earthing should be not more than 2Ω as per details given below.
Making of triangular bridge by using MS electrode, GI strip 50x6mm and GI Pipe 40 mm dia with providing of well type pipe earthing upto 15 Mtr. depth below ground level including welding etc. by boaring process at T/F neutral, LA and newly erected structure including cost of GI pipe of size 40 mm dia 15 mtr. long of ISI mark.(all the required material will be supllied by the contractor).
Supply of GI strip of size 50x6mm for earthing of all newly erected structures and equipments in switchyard including cutting, fixing & proper welding with equipments. All LA will be seprately earth also as per RESPO norms. (All the required materials will be provided by firm.)
Construction of new transformer plinth of size 4.5x3.5 Mtr. for upto 10 MVA Transfomer having depth 0.5 Mtr. below ground level & 0.5 Mtr. above ground level. Existing plinth is in very damage condition and its height is below ground level. The work including excavation of foundation. base & concreting of foundation base of CC 1:6:12 ratio (cement, fine sand & brick ballast) first class brick work of cement morter of ratio 1:4 for masonry & lintring work of transformer plinth of RCC work of ratio 1:2:4 (cement, coarse sand and store grit of 20mm using MS Bars of 10mm dia(tor) for reinforcement of linter including cutting, bending & binding of MS bars of required plinth size & shape. The work also includes laying of 2 Nos. 3.5 Mts. long rail pieces after cutting in proper size & shape & fitting etc. The plinth will be made as per RESSPO/Approved drawing suitable for 10 MVA transformer & shall be plastered of walls of ratio 1:4 (cement & fine sand)/finished on top and sides of the plinth. (all material will be provided by firm).
fabrication, erection and grouting of the following structures as per RESSPO/ Approved Drawing and its, plinth 30 cm above ground level as directed by the Engineer Incharge, Grouting of structure will be done in 1:4:8 ratio of cement, sand & coarse aggregate with material including all accessories.
Post insulator Structure
Bus Isolator Structure
33 KV VCB Structure
33 KV CT Structure
33 KV PT Structure
Fuse Set Structure
Lightening Arrestor Structure
Mounting and installation, including Mechnical & electrical fixing and adjusting of the following equipments on their respective structures including proper adjustment:
33 KV Post insulator
33 KV Bus Isolator
33 KV VCB
33 KV Fuse Set
33 KV Lightening Arrestor
Complete laying and termination of copper control cable from both (old and new 5 MVA TF) 5 MVA power T/F and 33 KV VCB in the out door switch yard to Transformer relay control panel inside the control room including cost of all materials and labour required for proper completion of works as per RESSPO drawings.
Control Cable 4x2.5 mm2
Control Cable 2x2.5 mm2
24 V Battery set with charger (To be provided by firm I.S.I. mark only of DC System with one float cum boost charger & battery set for 24V. System with 150A.H. Capacity with cabinet).
Stringing of 33 KV Bus bar with ACSR Dog conductor including making vertical/Horizontal jumper connections through PG clamps and connecting all the equipments with each others through connecting clamps, work includes all the jumpering from bus bar. (All type of fitting, PG clamp etc. provided by Firm).
Making of M.S. Angle Ladder type frame of Angle (65x65x6mm) & M.S. Strip (50x6mm) near power transformer for power cable with concreting in 1:4:8 ratio of cement, sand & coarse aggregate and proper clamping (50x6mm) of the same with transformer cable (grouting material will be provided by The firm).
Making of M.S. Angle frame of (65x65x6mm) in the shape of "L" to connect T/F Neutral by copper flexible strip with proper clamping including cost of copper strip. Earthing of Power T/F Neutral shall be done separately including welding with M.S. bar Electrode bridge 1 No. after making in triangular shape and proper connection with well type earthing etc. Grouting of structure will be done in 1:4:8 ratio of cement, sand & coarse aggregate (grouting material will be provided by The firm).
Laying of 11KV cable of different size from power T/F to control room I/C and control room to D/P outside Sub-Station over a pad of river sand . Cable shall be laid 500mm below the ground in the yard by covering three sides with Ist Class brick and Ganga sand (All type laying material will be provided by the Firm except 11 KV cables ).
11 KV Cable hoisting with MS Pipe in cost of material.
Erection and grouting of double pole structure of PCC Poles/S.T. Pole including stays for 11KV out door feeders, complete in all respect as per RESSPO drawing along with grouting material about 3 meter 4" dia G.I. pipe along with required elbow shall be provided at D/P for power cable including provision of 02 Nos. feeders name plate on D/P.
Erection of 11 KV incoming, outgoing and coupler (with testing & setting of relays) in substation control room including grouting of Anchor bolts of panel and making of pocket for power cable to insert in panel from trench and complete filling of control room's tranches by river sand.
Erection & testing of 1 No. single T/F Control penel in substation control room including grouting of anchor bolts of panel and making of pocket for control cable to insert in panel from trench and complete connection with new and existing both T/F, 33 KV VCB, CT etc, with filling of control room's tranches by river sand.
Repairing of existing 33KV VCB in switchyard including repalcement of all required accessories as motor, intrruptor etc. All type of material should be provided by the firm.
Termination of 11 KV Different size XLPE cable by filling 11 KV heat shrinkable type cable boxes including proper connection with LV side of T/F switch gear panels and double poles by providing suitable connectors.
Shifting and dragging of 33/11 KV 5 MVA transformer from road side to its plinth alongwith its erection including fixing of all assessories and top-up of T/F oil.
Work related maintinance of old and used 5 MVA Transformer.
Attending of leakage of power transformer (Replacement of damage gasket kit etc)(all required material will be provided by firm)
Centrifusing of transformer oil.(all required material will be provided by firm)
Replacement of damage brether and silica jel.(all required material will be provided by firm)
Replacement of damage WTI and OTI.(all required material will be provided by firm)
Painting of old transformer.(all required material will be provided by firm)
Replacement of damage buchholz relay(all required material will be provided by firm)
Replacement of damaged 33kv, 11kv bushings (all required material will be provided by firm)
Painting of the all fabicated structures with one coat of red oxide primer and two coats of synthetic enamel alumm. Paint/green paint of ISI Mark alongwith earthing strip above ground level.(all material provided by firm)
Carriage of old scrap material from site to store center Badaun.
Providing of rubber matting sheet 8/10mm
Part - (B) INCREASING CAPACITY OF 33/11KV S/S Nagarjuna FROM 10+5 MVA TO 2x10 MVA
Loading, unloading and safe carriage of the following materials from any Electy. Store Center of Electricity store division of Bareilly zone.
33 KV Bus Isolator
33 KV VCB complete structure
33 KV control panel single T/F
11 KV 3x300 mm2 XLPE Cable
11 KV Cable jointing Kit 3x300 mm2 O/D
33 kv O/D CT CTR 200/100/1
ACSR PANTHER CONDUCTOR
Earthing of indoor & outdoor equipments of Sub-Station after proper welding of joints and painting of earth strip above soil with proper clamp etc. as per RESPO approved drawing & resistance of earthing should be not more than 2Ω as per details given below.
Making of triangular bridge by using MS electrode, GI strip 50x6mm and GI Pipe 40 mm dia with providing of well type pipe earthing upto 15 Mtr. depth below ground level including welding etc. by boaring process at T/F neutral, LA and newly erected structure including cost of GI pipe of size 40 mm dia 15 mtr. long of ISI mark.(all the required material will be supllied by the contractor).
Supply of GI strip of size 50x6mm for earthing of all newly erected structures and equipments in switchyard including cutting, fixing & proper welding with equipments. All LA will be seprately earth also as per RESPO norms. (All the required materials will be provided by firm.)
Fabrication, erection and grouting of the following structures as per RESSPO/ Approved Drawing and its, plinth 30cm above ground leval as directed by the Engineer Incharge (All steel sections will be provided by Deptt).
Installation of followig equipments on their respective structures including mechanical & electrical fixing after proper adjustment on their structure.
33 KV Bus isolator
Lightening Arrestor
33 KV VCB complete
Dismantling of existing following damage equipments on their structure.
33 KV Bus Isolator
33 KV Lightening Arrestor
Complete laying and termination of copper control cables from both (old and new 10 MVA TF) 33 KV VCB, 33 KV CT,10 MVA power T/F in the out door switch yard to new single transformer relay control panel inside the control room including cost of all materials and labour required for proper completion of works as per RESSPO drawings, including cost of testing of transformer, VCB, CT, relay pannel & proper relay settings as per requirement etc.
Control Cable 4x2.5 mm2
Control Cable 2x2.5 mm2
Laying of dog conductor alongwith cost of all required calmps and connectors etc. as per RESSPO Approved drawing of Bus bar L.A., C.T., V.C.B., Bus Isolator etc.
Laying of 11KV cable of different size from power T/F to control room I/C . 11 KV Cable will be layed in brick trench constructed below 750mm to the ground level over the ganga sand. brick trench will be constructed by Ist class bricks covering three sides of cable, after laying 11 KV Cable brick trench will be filed by Ganga sand & then will be covered by bricks & backfill of soil over cable trench as per RESPO norms.
Termination of 33 KV 3x300sqmm size XLPE cable by filling 33 KV heat shrinkable type cable boxes including hoisting of cable and proper connection with bus bar gantry and bus isolator by providing suitable connectors.
Dismantaling of existing damage control panel.
Erection & testing of 1 No. Single T/F Control penel in substation control room including grouting of anchor bolts of panel and making of pocket for control cable to insert in panel from trench and complete filling of control room's tranches by river sand.
Safely shifting and dragging of 33/11 KV 5 MVA transformer from its plinth to safe site at Sub-station. Including its proper disconnecting of HT, LT side connection, neutral , Body earthing etc.
Shifting and dragging of 33/11 KV 10 MVA transformer from road side to its plinth alongwith its erection including fixing of all assessories and top-up of T/F oil.
Painting of all structure of Swithcyard with one coat of red oxide primer and 2 coat of synthetic enamle aluminum pain/green paint of ISI mark along of Earth strip above ground level
Carriage of old scrap material from site to store center Badaun.
Complete repairnig of swichyard fencing.
Part - (C) INCREASING CAPACITY OF 33/11KV S/S Zarifnagar FROM 10+5 MVA TO 2x10 MVA
Loading, unloading and safe carriage of the following materials from any Electy. Store Center of Electricity store division of Bareilly zone.
11 KV 3x300 mm2 XLPE Cable
11 KV Cable jointing Kit 3x300 mm2 O/D
33 kv fuse set
ACSR PANTHER CONDUCTOR
Earthing of indoor & outdoor equipments of Sub-Station after proper welding of joints and painting of earth strip above soil with proper clamp etc. as per RESPO approved drawing & resistance of earthing should be not more than 2Ω as per details given below.
Making of triangular bridge by using MS electrode, GI strip 50x6mm and GI Pipe 40 mm dia with providing of well type pipe earthing upto 15 Mtr. depth below ground level including welding etc. by boaring process at T/F neutral, LA and newly erected structure including cost of GI pipe of size 40 mm dia 15 mtr. long of ISI mark.(all the required material will be supllied by the contractor).
Supply of GI strip of size 50x6mm for earthing of all newly erected structures and equipments in switchyard including cutting, fixing & proper welding with equipments. All LA will be seprately earth also as per RESPO norms. (All the required materials will be provided by firm.)
Installation of followig equipments on their respective structures including mechanical & electrical fixing after proper adjustment on their structure.
33 KV fuse set
Dismantling of existing following damage equipments on their structure.
33 KV fuse set
Laying of panther conductor along with cost of all required calmps and connectors etc. as per RESSPO Approved drawing of Bus bar L.A., C.T., V.C.B., Bus Isolator etc.
Laying of 11KV cable of different size from power T/F to control room I/C . 11 KV Cable will be layed in brick trench constructed below 750mm to the ground level over the ganga sand. brick trench will be constructed by Ist class bricks covering three sides of cable, after laying 11 KV Cable brick trench will be filed by Ganga sand & then will be covered by bricks & backfill of soil over cable trench as per RESPO norms.
Termination of 11 KV 3x300sqmm size XLPE cable by filling 11 KV heat shrinkable type cable boxes including hoisting of cable and proper connection with bus bar gantry and bus isolator by providing suitable connectors.
Safely shifting and dragging of 33/11 KV 5 MVA transformer from its plinth to safe site at Sub-station. Including its proper disconnecting of HT, LT side connection, neutral , Body earthing etc.
Shifting and dragging of 33/11 KV 10 MVA transformer from road side to its plinth alongwith its erection including fixing of all assessories and top-up of T/F oil.
Painting of all structure of Swithcyard with one coat of red oxide primer and 2 coat of synthetic enamle aluminum pain/green paint of ISI mark along of Earth strip above ground level
Carriage of old scrap material from site to store center Bareilly.
Complete repairnig of swichyard fencing.
M/S MEGHA ENTERPRISES
SHREE KRISHNA TRADING CO
M/S SUPER ENGINEERING TRADERS
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .