Permanent Water Supply Scheme to Hingoli Industrial area.... Providing, erecting, testing and commissioning pumping machinery, arrangement of power supply for pumps and other related works

Providing, installing, commissioning and testing of VERTICAL TURBINE, self water lubricated above floor type pump at Jackwell Siddheshwar Dam with VHS motor capable of discharging water at the rate of 105 Cum/ Hr. at the duty point head of 92.50 M with suspension length of 14.00 mtrs. including bowl assembly and operating within the head range of 86 to 100 Mtr. with 1460 rpm with Vertical hollow shaft squirrel cage induction motor of capacity to run the pump of minimum 45 KW / 60 HP with "F" class insulation and B class temperature rise with thermostat protection embedded in stator winding complete operating on 440 V, 50Hz, 3 Ph, 1500 RPM AC power supply suitable to drive the pump complete with all accessories. Pump including stainless steel basket type strainer, bowl assembly, column assembly, discharge head , base plate of suitable size with minimum thickness of 24 mm, connecting stool etc. complete as per latest IS specifications. The column pipes shall be anufactured from ERW pipes of 10 mm thick and each of maximum 1.5 m length provided with anticorrosive and special treatment paint and all line shafts impellers shafts of stainless steel SS 410 and impeller should be of Bronze including all consumable materials, consumable materials, accurate digital type glycerin Pressure gauge to read entire range of pressure complete with necessary tubing. The pump should have flat efficiency characteristics between operating range as per detail item specifications

"Providing, installing, commissioning and testing of VERTICAL TURBINE, self water lubricated above floor type pump at Hingoli WTP with VHS motor capable of discharging water at the rate of 100 Cum/ Hr. at the duty point head of 60.00 M with suspension length of 3.10 mtrs. including bowl assembly and operating within the head range of 58 to 61 Mtr. with 1460 rpm with Vertical hollow shaft squirrel cage induction motor of capacity to run the pump of minimum 37 KW / 50 HP with ""F"" class insulation and B class temperature rise with thermostat protection embedded in stator winding complete operating on 440 V, 50Hz, 3 Ph, 1500 RPM AC power supply suitable to drive the pump complete with all accessories. Pump including stainless steel basket type strainer, bowl assembly, column assembly, discharge head of 200 mm dia, base plate of suitable size with minimum thickness of 24 mm, connecting stool etc. complete as per latest IS specifications. The column pipes shall be manufactured from ERW pipes of 8 mm thick and each of maximum 1.5 m length provided with anticorrosive and special treatment paint and all line shafts impellers shafts of stainless steel SS 410 and impeller should be of Bronze including all consumable materials, consumable materials, accurate digital type glycerin Pressure gauge to read entire range of pressure complete with necessary tubing. The pump should have flat efficiency characteristics between operating range as per detail item specifications "

Designing, Providing Erecting & commissioning LT panel 50 HP FCMA SOFT STARTER L.T. Panel with 1 Incomer and 2 Outgoing of 50HP FCMA , Auxiliary Feeder Panel fabricated from 14 Gauge CRCA MS sheet with powder coating including all accessories, switchgear, indicating lamps, push buttons, cables, meters, Copper busbar, foundation channel, with all self-contained inter connections, internal wiring with ferrules, suitable engraved designation labels etc

Supplying, erecting, testing & commisioning 25 kVAr, 440 V, 3 phase, 50 Hz., APFC panel with contactor logic with intelligent microprocessor relay, consisting of 1,2,2,5,5,5,5 or suitable steps of APP/MPP type capacitor units with detuned (harmonic filter) reactors of suitable rating, APFC panel shall be compliance to IEC 61439 and power quality IEC 61921 standard per specification no. CP-ED/APFC.

Providing, erecting and commissioning single girder Electrically Operated Rectangular Over head Travelling Crane with 6 m lift complete with wire rope hoist, class II duty, all three motions electrically operated by suitable rating motor IP 54, control panel and down pendant control block. LF 4-1) 5 Tonne Capacity LF 4-1-2) Above 6 m upto 8 m span

Square Bar / Rail Providing, erecting and fixing square bar of EN 8 as rail for over head crane on provided track, girder / continuous corbel beam, including supporting plate and "J" bolts. LF 5 -1) 50 X 50 mm ( EN 8)

Manufacturing, providing and supplying spirally welded / ERW/ SAW / fabricated M. S. pipes (Commercial Quality) including procurements of plates, gas cutting to required size rolling, tack welding assembling in suitable lengths to form pipes, welding on automatic welding machine and forming ‘V’ edge on both ends of pipes including railway freight, insurance, unloading from railway wagon, loading into truck, transport to stores, nloading, stacking, excluding GST levied by GOI & GOM in all respect etc. complete as per IS - 3589 and IS-5504 as applicable as per specifications (No negative Tolerance in thickness is permissible). Dia of Pipe : 200 mm (I. D.) Thickness of pipe 6) 10 mm

Dia of Pipe : 400 mm (I. D.) Thickness of pipe : 4) 10 mm.

Lowering,  laying  in  position to correct line and level including M. S. pipes with / without any outcoating on pedestals or chairs upon prepared formation. The rate to include loading, unloading, hoisting, marginal cutting wherever required, assembling and tack welding, and transportation upto 500 M. etc. completed as specified.  5 mm to 10 mm thick i)) Upto 400 mm. dia.

Welding in all positions with required number of runs, for M. S. pipes internally and / or externally including gauging wherever necessary, fixing appurtenances and other accessories in connection with pipe laying work as per specification. 10 mm.