WBPWD/SEHEC/CKHED/NIQ06/19-20

Amount

INSTALLATION WORK for DG Set:

S&F MS angle iron structure made of (80x80x6)mm / (50x50x6)mm MS angle to support 350mm/250mm/150mm dia MS pipe & Fuel tank support for 1010KVA DG set Incl painting as per GS.

Supply and Installation of exhaust pipe line connection with MS black pipe 350mm (14”) dia ISI approved, necessary nuts, bolts, washer, gasket incl. electrical welding where necessary.

Supply and Installation of exhaust pipe line connection with MS black pipe 250mm (10”) dia ISI approved, necessary nuts, bolts, washer, gasket incl. electrical welding where necessary.

Supply and Installation of exhaust pipe line connection with MS black pipe 200mm (10”) dia ISI approved, necessary nuts, bolts, washer, gasket incl. electrical welding where necessary.

Supply and Installation of exhaust pipe line connection with MS black pipe 150mm (6”) dia ISI approved, necessary nuts, bolts, washer, gasket incl. electrical welding where necessary.

S&F 350mm dia MS heavy type long bend

S&F250mm dia MS heavy type long bend

S&F200mm dia MS heavy type long bend

S&F 150mm dia MS heavy type long bend

S&F 350mm dia MS heavy type 'T'

S&F 200mm dia MS heavy type 'T'

S&F 150mm dia MS heavy type 'T'

S&F 350mm dia MS plug.

S&F 250mm dia MS plug.

S&F 200mm dia MS plug.

S&F 150mm dia MS plug.

Painting the 350 dia MS black pipe by Aluminum paint of two coat over the RO primer. Approved make.

Painting the 250 dia MS black pipe by Aluminum paint of two coat over the RO primer. Approved make.

Painting the 200 dia MS black pipe by Aluminum paint of two coat over the RO primer. Approved make.

Painting the 150 dia MS black pipe by Aluminum paint of two coat over the RO primer. Approved make.

Wrapping the 350 mm Exhaust pipe line with Al. sheet high quality with necessary wire mesh & 50mm thick glass wool. as per direction of EIC.

Wrapping the 250 mm Exhaust pipe line with Al. sheet high quality with necessary wire mesh & 50mm thick glass wool. as per direction of EIC.

Wrapping the 200 mm Exhaust pipe line with Al. sheet high quality with necessary wire mesh & 50mm thick glass wool. as per direction of EIC.

Wrapping the 150 mm Exhaust pipe line with Al. sheet high quality with necessary wire mesh & 50mm thick glass wool. as per direction of EIC.

S&F rain protection canopy for 350mm Exhaust pipe.

S&F rain protection canopy for 250mm Exhaust pipe.

S&F rain protection canopy for 200mm Exhaust pipe.

S&F rain protection canopy for 150mm Exhaust pipe.

Hire charges for scaffolding by bamboo required rope of square type arrangement for smooth working & carriage of MS black pipe by vertical run & dismantling at the end of work.

Excavation of soil for installation of Earth Electrode and filling & ramming. For Soft Soil

Earthing with 80 mm dia GI pipe (TATA-Medium)x 3.0 Mts. long and 1 No. 65 mm x 8 mm galvanized (Hot Dip) steel strip (4 Mts. long), 20 mm dia x 125 mm long galvanized bolt, double nuts, double washers including finishing both ends by making holes etc. and S & F 80 mm dia GI pipe (ISI-Medium) protection (3 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level to an average depth of 3.65 Mts

Extra for providing masonry enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement mortar (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 65 mm x 8 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required

S&D of HSD for testing & immediate run of DG set. Incl carrying charge

Supply & Laying of cable above 150 sqmm and upto 300 sqmm through existing covered masonry trench incl. taking out RC covers, setting them in order, mending good the damages filling the trench with fine dry sand incl. supplying sand

4 nos. run 4 core 300 sqmm Al. XLPE Armoured cable (Havells/ Gloster/ Polycab/RRKable/Crystal). (For 1010 KVA)

2 nos.run 4 core 300 sqmm Al. XLPE/PVC Armoured cable (Havells/ Gloster/ Polycab/RRKable/Crystal) . (For 500/400 KVA)

2 nos run 4 core 150 sqmm Al. XLPE/PVC Armoured cable (Havells/ Gloster/ Polycab/RRKable/Crystal) (For 250 kva)

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cable as below :

4 core 300sqmm Al. XLPE/PVC Armoured cable

4 core 150sqmm Al. XLPE/PVC Armoured cable

Finishing the end of following sizes armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials

4 core 300 sqmm Al. XLPE/PVC Armoured cable

4 core 150 sqmm Al. XLPE/PVC Armoured cable

Supply and laying of 12core 2.5sqmm copper Armoured control cable,after cutting floor/pavent/wall/and making holes incl. Embedding the cable at an average depth as 75mm and mending good the damages to original finish incl. Removing the rubbish

Supply and laying of 2core 6sqmm copper Armoured control cable, after cutting floor/pavent/wall/and making holes incl. Embedding the cable at an average depth as 75mm and mending good the damages to original finish incl. Removing the rubbish

Supply & Laying of single core 500Sqmm Copper Aurmoured cable, (Havells/ Gloster/ Polycab/RRKable/Crystal) after cutting floor/pavement/wall/ and making holes incl., embedding the cable at an average depth as 100mm and mending good the damages to original finish incl. removing the rubbish. [4X 2nos paralal for 1010KVA 4X Single for 500 KVA]

Supply & Laying of single core 400Sqmm Copper Aurmoured cable, (Havells/ Gloster/ Polycab/RRKable/Crystal) after cutting floor/pavement/wall/ and making holes incl., embedding the cable at an average depth as 100mm and mending good the damages to original finish incl. removing the rubbish. [ 4X Single for 400 KVA]

Supply & Laying of single core 240Sqmm Copper Aurmoured cable, (Havells/ Gloster/ Polycab/RRKable/Crystal) after cutting floor/pavement/wall/ and making holes incl., embedding the cable at an average depth as 100mm and mending good the damages to original finish incl. removing the rubbish. [ 4X Single for 250 KVA]

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture proof entry of XLPE/PVC armoured cable as below.

Single core 500 Sqmm Armoured cable

Single core 400 Sqmm Armoured cable

Single core 240 Sqmm Armoured cable

12 core 2.5Sqmm Armoured cable

2 core 6Sqmm Armoured cable

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying dowells make sockets, tapes.

Single core 500 Sqmm copper wire by dowels make heavy duty long barrel Copper socket.

Single core 400 Sqmm copper wire by dowels make heavy duty long barrel Copper socket.

Single core 240 Sqmm copper wire by dowels make heavy duty long barrel Copper socket.

12 core 2.5Sqmm Armoured cable

2 core 6Sqmm Armoured cable

S&F 2 Kg capacity ABC type Gas pressure (DCP) fire extinguisher on wall by suitable size of iron bracket (Make - Fire Shield)

S&F 9 ltr. Capacity round fire bucket with iron hook and duly filled up by sand.

Terms and condition

The Agency must procure the materials from the Manufacturer / OEM or from their authorised sales channel so that the standard warranty / support of the Manufacturer / OEM becomes applicable to the products to be delivered and installed by them.

Documents that authenticates such procurement from the Manufacturer / OEM or from their authorized sales channel and standard warranty / support should be sent from the e-mail of the Manufacturer / OEM / authorized sales channel to the e-mail of Engineer-in-Charge and hard copy of it to be submitted during execution, of work/submission of bill.

If any refurbished material is supplied and installed, penal action will be taken as per existing rules

Defect Liability period 1 (One) Year

(Rates should be Quoted inclusive of all taxes & duities and L.W.C. @ 1% as applicable)

S. G. ENTERPRISE

Electromech Engineers Co-Operative Society Ltd.

SIMPSON AND FERRIS PVT LTD