Repair/Replacement pipe lines control valves, pumping system and switchgear installed at JIB area under GE (Utilities) Udhampur.

Amount

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth,foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. and taking out/laying of pipe lines of soft/loose soil complete all as specified and directed by Engr-in-Charge.

Returning, filling in, including spreading, leveling, watering and well ramming in layers, each layer not exceeding 25cm thick after pipes have been laid and tested complete all as specified and directed by Engr-in-Charge.

Removing excavated material to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed by Engr-in-Charge.

Taking up or down old unseviceable GI pipe of size 150 mm dia including all fittings complete all as specified and directed by Engr-in-Charge. Note : (i) Unsv materials retrieved from site should be deposited in MES store by the contractor. (ii) Cost of transportation of unserviceable materials from site to MES store deemed to be included in the quoted rates.

All as per serial item No. 04.00 here-in-before but of 100 mm dia complete all as specified and directed by Engr-in-Charge. Note : (i) Unsv materials retrieved from site should be deposited in MES store by the contractor. (ii) Cost of transportation of unserviceable materials from site to MES store deemed to be included in the quoted rates.

Taking up or down old unseviceable GI pipe of size 80 mm dia including all fittings complete all as specified and directed by Engr-in-Charge.

All as per serial item No 06.00 here-in-before but of size 50 mm dia complete all as specified and directed by Engr-in-Charge.

All as per serial item No 06.00 here-in-before but of size 40 mm dia complete all as specified and directed by Engr-in-Charge.

All as per serial item No 06.00 here-in-before but of size 25 mm dia complete all as specified and directed by Engr-in-Charge.

All as per serial item No 06.00 here-in-before but of size 20 mm dia complete all as specified and directed by Engr-in-Charge.

All as per serial item No 06.00 here-in-before but of size 15 mm dia complete all as specified and directed by Engr-in-Charge.

Supply & fixing GI pipes of size 150 mm dia, medium grade, galvanized with all fitting such as bends, tees, nipples, union and sockets, clamps etc laid in trenches, under floor/walls etc complete all as specified and directed by Engr-in-Charge.

All as per serial item No 12.00 here-in-before but of size 100 mm dia complete all as specified and directed by Engr-in-Charge.

All as per serial item No 12.00 here-in-before but of size 80 mm dia complete all as specified and directed by Engr-in-Charge.

All as per serial item No 12.00 here-in-before but of size 50 mm dia complete all as specified and directed by Engr-in-Charge.

All as per serial item No 12.00 here-in-before but of size 40 mm dia complete all as specified and directed by Engr-in-Charge.

All as per serial item No 12.00 here-in-before but of size 25 mm dia complete all as specified and directed by Engr-in-Charge.

All as per serial item No 12.00 here-in-before but of size 20 mm dia complete all as specified and directed by Engr-in-Charge.

All as per serial item No 12.00 here-in-before but of size 15 mm dia complete all as specified and directed by Engr-in-Charge.

Refixing GI/CI pipe obtained from Item No. 04 above and connections in new or old position (walls, trenches, ceiling and floors etc) of size 150 mm dia complete including main branch connections complete all as specified and directed by Engr-in-Charge.

All as per serial item No 20.00 here-in-before but of size 100 mm dia obtained from item No. 05 complete all as specified and directed by Engr-in-Charge.

All as per serial item No 20.00 here-in-before but of size 80 mm dia obtained from item No. 06 complete all as specified and directed by Engr-in-Charge.

All as per serial item No 20.00 here-in-before but of size 50 mm dia obtained from item No. 07 complete all as specified and directed by Engr-in-Charge.

All as per serial item No 20.00 here-in-before but of size 40 mm dia obtained from item No. 08 complete all as specified and directed by Engr-in-Charge.

All as per serial item No 20.00 here-in-before but of size 25 mm dia obtained from item No. 09 complete all as specified and directed by Engr-in-Charge.

All as per serial item No 20.00 here-in-before but of size 20 mm dia obtained from item No. 10 complete all as specified and directed by Engr-in-Charge.

All as per serial item No 20.00 here-in-before but of size 15 mm dia obtained from item No. 11 complete all as specified and directed by Engr-in-Charge.

Supply and fix in replacement cast iron sluice valve suitable of size 300 mm (PN 1.6) ISI Marked with iron wheel head both end flanged, non rising type and jointing with the rubber or fibre board gasket complete with and including required nos size of nuts, bolts and washers including taking down the old existing,complete all as specified and directed by Engr-in-Charge. Note : (i) Unserviceable materials retrieved from site should be deposited in MES store by the contractor. (ii) Cost of transportation of unsv materials from site to MES store deemed to be included in the quoted rates.

Supply and fix in replacement cast iron sluice valve suitable of size 250 mm (PN 1.6) ISI Marked with iron wheel head both end flanged, non rising type and jointing with the rubber or fibre board gasket complete with and including required nos size of nuts, bolts and washers including taking down the old existing, complete all as specified and directed by Engr-in-Charge. Note : (i) Unserviceable materials retrieved from site should be deposited in MES store by the contractor. (ii) Cost of transportation of unsv materials from site to MES store deemed to be included in the quoted rates.

S&F Cast Iron sluice valve of sizes 200 mm dia (PN 1.6) ISI Marked with iron wheel head both end flanged, CI /steel spindle, non rising type complete with Neoprene rubber gasket, nuts, bolts and washers etc, complete all as specified and directed. Note : (i) Unserviceable materials retrieved from site should be deposited in MES store by the contractor. (ii) Cost of transportation of unsv materials from site to MES store deemed to be included in the quoted rates.

All as per serial item No 30.00 here-in-before but of size 150 mm dia complete all as specified and directed by Engr-in-Charge.

All as per serial item No 30.00 here-in-before but of size 100 mm dia complete all as specified and directed by Engr-in-Charge.

All as per serial item No 30.00 here-in-before but of size 80 mm dia complete all as specified and directed by Engr-in-Charge.

Supply and fix in replacement of cast iron non return valve suitable for 150 mm bore pipe heavy duty both end flanged of pressure rating PN 1.6 and jointing with the rubber or fibre board gasket complete with and including required nos size of nuts, bolts and washers including taking down the old existing, complete all as specified and directed by Engr-in-Charge. Note : (i) Unserviceable materials retrieved from site should be deposited in MES store by the contractor. (ii) Cost of transportation of unsv materials from site to MES store deemed to be included in the quoted rates.

All as per serial item No 34.00 here-in-before but of size 100 mm dia complete all as specified and directed by Engr-in-Charge.

All as per serial item No 34.00 here-in-before but of size 80 mm dia complete all as specified and directed by Engr-in-Charge.

Supply and fix in replacement of cast iron air release valve with two air outlets of size 100 mm dia including all jointing materials like high pressure rubber gasket nuts, bolts, washers with arrangement for fixing, including taking down complete, complete all as specified and directed by Engr-in-Charge. Note : (i) Unserviceable materials retrieved from site should be deposited in MES store by the contractor. (ii) Cost of transportation of unsv materials from site to MES store deemed to be included in the quoted rates.

All as per serial item No 37.00 here-in-before but of size 80 mm dia complete all as specified and directed by Engr-in-Charge.

Decoupling, disconnecting sluice valve of size 300 mm dia taking down from pipe line, opening all parts, derusting, cleaning, overhauling comprising of repairs/replacement of unserviceable parts of sluice valve and taking to workshop (if reqd) for repairs. Reassembling of sluice valves and fixing on its original position complete all as specified and directed by Engr-in-Charge. Note :- (i) Loading/unloading & transportation charges shall be deemed included in the quoted rates. (ii) S&F of spare parts shall be measured and paid separately under respective items:-

Stem Nut (Check Nut) complete all as specified and directed by Engr-in-Charge.

Stem bush bronze complete all as specified and directed by Engr-in-Charge.

Stem Stainless Steel (Spindle) complete all as specified and directed by Engr-in-Charge.

Gland Flange cast iron complete all as specified and directed by Engr-in-Charge.

Stud / Bolt carbon steel complete all as specified and directed by Engr-in-Charge.

Decoupling, disconnecting sluice valve of size 250 mm dia taking down from pipe line, opening all parts, derusting, cleaning, overhauling comprising of repairs/replacement of unserviceable parts of sluice valve and taking to workshop (if reqd) for repairs. Reassembling of sluice valves and fixing on its original position complete all as specified and directed by Engr-in-Charge. Note :- (i) Loading/unloading & transportation charges shall be deemed included in the quoted rates. (ii) S&F of spare parts shall be measured and paid separately under respective items:-

Stem Nut (Check Nut) complete all as specified and directed by Engr-in-Charge.

Stem bush bronze complete all as specified and directed by Engr-in-Charge.

Stem Stainless Steel (Spindle) complete all as specified and directed by Engr-in-Charge.

Gland Flange cast iron complete all as specified and directed by Engr-in-Charge.

Stud / Bolt carbon steel complete all as specified and directed by Engr-in-Charge.

Decoupling, disconnecting sluice valve of size 200 mm dia taking down from pipe line, opening all parts, derusting, cleaning, overhauling comprising of repairs/replacement of unserviceable parts of sluice valve and taking to workshop (if reqd) for repairs. Reassembling of sluice valves and fixing on its original position complete all as specified and directed by Engr-in- Charge. Note :- (i) Loading/unloading & transportation charges shall be deemed included in the quoted rates. (ii) S&F of spare parts shall be measured and paid separately under respective items:-

Stem Nut (Check Nut) complete all as specified and directed by Engr-in-Charge.

Stem bush bronze complete all as specified and directed by Engr-in-Charge.

Stem Stainless Steel (Spindle) complete all as specified and directed by Engr-in-Charge.

Gland Flange cast iron complete all as specified and directed by Engr-in-Charge.

Stud / Bolt carbon steel complete all as specified and directed by Engr-in-Charge.

Decoupling, disconnecting sluice valve of size 150 mm dia taking down from pipe line, opening all parts, derusting, cleaning, overhauling comprising of repairs/replacement of unserviceable parts of sluice valve and taking to workshop (if reqd) for repairs. Reassembling of sluice valves and fixing on its original position complete all as specified and directed by Engr-in- Charge. Note :- (i) Loading/unloading & transportation charges shall be deemed included in the quoted rates. (ii) S&F of spare parts shall be measured and paid separately under respective items:-

Stem Nut (Check Nut) complete all as specified and directed by Engr-in-Charge.

Stem bush bronze complete all as specified and directed by Engr-in-Charge.

Stem Stainless Steel (Spindle) complete all as specified and directed by Engr-in-Charge.

Gland Flange cast iron complete all as specified and directed by Engr-in-Charge.

Stud / Bolt carbon steel complete all as specified and directed by Engr-in-Charge.

Decoupling, disconnecting sluice valve of size 100 mm dia taking down from pipe line, opening all parts, derusting, cleaning, overhauling comprising of repairs/replacement of unserviceable parts of sluice valve and taking to workshop (if reqd) for repairs. Reassembling of sluice valves and fixing on its original position complete all as specified and directed by Engr-in- Charge. Note :- (i) Loading/unloading & transportation charges shall be deemed included in the quoted rates. (ii) S&F of spare parts shall be measured and paid separately under respective items:-

Stem Nut (Check Nut) complete all as specified and directed by Engr-in-Charge.

Stem bush bronze complete all as specified and directed by Engr-in-Charge.

Stem Stainless Steel (Spindle) complete all as specified and directed by Engr-in-Charge.

Gland Flange cast iron complete all as specified and directed by Engr-in-Charge.

Stud / Bolt carbon steel complete all as specified and directed by Engr-in-Charge.

Decoupling, disconnecting sluice valve of size 80 mm dia taking down from pipe line, opening all parts, derusting, cleaning, overhauling comprising of repairs/replacement of unserviceable parts of sluice valve and taking to workshop (if reqd) for repairs. Reassembling of sluice valves and fixing on its original position complete all as specified and directed by Engr-in- Charge. Note :- (i) Loading/unloading & transportation charges shall be deemed included in the quoted rates. (ii) S&F of spare parts shall be measured and paid separately under respective items:-

Stem Nut (Check Nut) complete all as specified and directed by Engr-in-Charge.

Stem bush bronze complete all as specified and directed by Engr-in-Charge.

Stem Stainless Steel (Spindle) complete all as specified and directed by Engr-in-Charge.

Gland Flange cast iron complete all as specified and directed by Engr-in-Charge.

Stud / Bolt carbon steel complete all as specified and directed by Engr-in-Charge.

M&L for repair to leaking run lead joints in CI/DI spigot and socket end pipe line of 100 mm bore by providing new lead ,using good quality spun yarn, including necessary excavation, returning filling in trenches in any type of soil,bailing out water, and at any depth complete all as specified and directed by Engr-in-Charge. Note:- (i) Contractor fully responsible for necessory excavation for jointing work required T&P equipment, mechanical excavation work and man power at site requirement with making good disturbed surfaces of road/wall/floor etc and matching with existing surface included quoted rate. (ii) Required extra fittings/pipe will be measured and paid separately.

All as per serial item No 45.00 here-in-before but of dia 150 mm bore pipe complete all as specified and directed by Engr-in-Charge.

All as per serial item No 45.00 here-in-before but of dia 200 mm bore pipe complete all as specified and directed by Engr-in-Charge.

M&L for repair to leaking GI pipe line of size 50 mm to 80 mm bore by providing necessary fitting such as socket, Tee, Elbow,etc including necessary excavation, returning filling in trenches in any type of soil,bailing out water, and any depth complete all as specified and directed by Engr-in-Charge. Note:- (i) Contractor fully responsible for necessory excavation for jointing work required T&P equipment, mechanical excavation work and man power at site requirement with making good disturbed surfaces of road/wall/floor etc and matching with existing surface included quoted rate. (ii) Required extra pipe will be measured and paid separately.

All as per serial item No 48.00 here-in-before but of size 20 mm to 40 mm bore pipe complete all as specified and directed by Engr-in-Charge.

Material and labour for repair to leaking flanged/circular welding joints of 100 to 200 mm bore MS/GI pipe line by providing rubber or fiber board gasket, new flanges if required at site, nut bolts, washers and welding works where required etc, including necessary excavation, returning filling in trenches in any type of soil, bailing out water, and any depth complete all as specified and directed by Engr-in-Charge. Note:- (i) Contractor fully responsible for necessory excavation for jointing work required T&P equipment, mechanical excavation work and man power at site requirement with making good disturbed surfaces of road/wall/floor etc and matching with existing surface included quoted rate. (ii) Required extra pipe will be measured and paid separately.

All as per serial item No. 50.00 here-in-before but of dia 250 to 300 mm bore pipe complete all as specified and directed by Engr-in-Charge.

M&L for cutting of existing road for crossing of MS/DI/CI/GI pipes for laying of any size pipes including necessary exacavation and earth work including repairing the same as per existing complete all as specified and directed by Engr-in-Charge.

M&L PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) cement concrete in as in foundation filling of pole & stay complete all as specified and directed by Engr-in-Charge.

M&L for Premix ready mix road repair patching compound for instant road repair manufactured with a blend of bitumen, aggregates and high grade polymer to ensure immediate bonding with existing surface available in bag of 25 Kg complete all as specified and directed by Engr-in-Charge.

Supply & Laying multicore PVC insulated and FR-LHS PVC round sheatehed, copper conductor(flexible) industrial cable 1100 volt grade confirming to Is 694 , 1.5 sqmm 1 core including suitable size PVC conduit laid complete all as specified and directed by Engr-in-Charge.

All as per serial item No. 55.00 here-in-before but of size 2.5 sqmm 1 core complete all as specified and directed by Engr-in-Charge.

Supply & laying of flexible pipe of 15/20 mm dia used for wiring purpose complete all as specified and directed by Engr-in-Charge.

Taking up or down PVC PP-R pipe of following sizes including all fittings complete all as specified and directed by Engr-in-Charge.

Bore of pipe 90 mm dia complete all as specified and directed by Engr-in-Charge.

Bore of pipe 75mm dia complete all as specified and directed by Engr-in-Charge.

Bore of pipe 50mm dia complete all as specified and directed by Engr-in-Charge.

Bore of pipe 25mm dia complete all as specified and directed by Engr-in-Charge.

Bore of pipe 20mm dia complete all as specified and directed by Engr-in-Charge.

Supply,laying, jointing & testing of PVC PP-R pipe having outer dia 90mm of pressure rating PN 16 /SDR 7.4 in three layer with all fittings laid in trenches complete all as specified and directed by Engr-in-Charge.

Supply,laying, jointing & testing of PVC PP-R pipe having outer dia 75mm of pressure rating PN 16 /SDR 7.4 in three layer with all fittings laid in trenches complete all as specified and directed by Engr-in-Charge.

Supply,laying, jointing & testing of PVC PP-R pipe having outer dia 50mm of pressure rating PN 16 /SDR 7.4 in three layer with all fittings laid in trenches complete all as specified and directed by Engr-in-Charge.

Supply,laying, jointing & testing of PVC PP-R pipe having outer dia 25mm of pressure rating PN 16 /SDR 7.4 in three layer with all fittings laid in trenches complete all as specified and directed by Engr-in-Charge.

Supply,laying, jointing & testing of PVC PP-R pipe having outer dia 20mm of pressure rating PN 16 /SDR 7.4 in three layer with all fittings laid in trenches complete all as specified and directed by Engr-in-Charge.

Supply fabrication and fixing MS joints like Flanged, bends, Tee, Tapers, collars, elbow, tail piece (any type) caps, plugs for 80 mm to 300 mm bore pipe complete all as specified and directed by Engr-in-Charge.

S&F in replacement of pop-up sprinklers having radius throw 20 meters and flow minimum 1.2 LPS at an operative pressure 4-6 kg/sqcm. The sprinkler shall be impact driven rotary with provision for adjusting at any degree of rotating having 01 inlet 20 mm pop up stoke, self flushing with pop-up sheild made of virgin grade engineering, plastic body, sprinkler shall be non corrodible, heavy duty complete all as specified and directed by Engr-in-Charge.

S&F of Gun-metal, globe or gate valves, 50 mm dia , heavy duty, with iron wheel head, screwed both ends (ISI marked), complete all as specified & directed by Engr-in-Charge.

All as per serial item No 66.00 here-in-before but upto 40 mm bore complete all as specified and directed by Engr-in-Charge.

All as per serial item No 66.00 here-in-before but upto 25 mm bore complete all as specified and directed by Engr-in-Charge.

All as per serial item No 66.00 here-in-before but upto 20 mm bore complete all as specified and directed by Engr-in-Charge.

All as per serial item No 66.00 here-in-before but upto 15 mm bore complete all as specified and directed by Engr-in-Charge.

Supply and fixing GI fittings medium grade ISI marked including complete all as required at site and as directed by Engr-in-Charge.

Elbow 15mm.

Elbow 20mm.

Elbow 25mm.

Elbow 40mm.

Elbow 50mm.

Elbow 80mm.

Socket 15mm.

Socket 20mm.

Socket 25mm.

Socket 40mm.

Socket 50mm.

Socket 80mm.

Union 15mm.

Union 20mm.

Union 25mm.

Union 40mm.

Union 50mm.

Union 80mm.

Elbow reducer 20 x 15mm.

Elbow reducer 25 x 20mm.

Elbow reducer 40 x 25mm.

Socket reducer 25x20mm.

Socket reducer 40x25mm.

Socket reducer 40x20mm.

Socket reducer 50x25mm.

Nipple 15 x50mm.

Nipple 15 x100mm.

Nipple 20 x50mm.

Nipple 20 x100mm.

Nipple 25 x 50mm.

Nipple 25 x 100mm.

Nipple 40 x 50mm.

Nipple 40 x 100mm.

Nipple 50 x 50mm.

Nipple 50 x 100mm.

Tee 15mm.

Tee 20mm.

Tee 25mm.

Tee 20x15mm.

Tee 25x20mm.

Tee 40x15mm.

Tee 40x20mm.

Tee 40x25mm.

Tee 50x25mm.

Dead plug 15mm.

Dead plug 20mm.

Dead plug 25mm.

Dead plug 40mm.

Dead plug 50mm.

Lead wool.

Decoupling, disconnecting suction line and discharge line taking down from foundation, dismounting from base channels strip opening all parts, derusting, cleaning, overhualing comprising of repairs/replacement of unserviceable parts of pump sets and taking to workshop (if reqd) for repairs. Reassembling of pump set mounting and fixing on base channel, recoupling of suction & discharge line realignment commissioning and testing in respect of centrifugal/multistage pump of capacity 60/75 HP complete all as specified and directed by Engr-in-Charge. Note :(i) Loading/unloading & transportation charges shall be deemed included in the quoted rates. (ii) S&F of parts shall be measured and paid separately under respective item of sch 'A'.

All as per serial item No 72.00 here-in-before but capacity 30/40/50 HP complete all as specified and directed by Engr-in-Charge.

All as per serial item No 72.00 here-in-before but capacity 15/20/25 HP complete all as specified and directed by Engr-in-Charge.

All as per serial item No 72.00 here-in-before but capacity 5/7.5/10 HP complete all as specified and directed by Engr-in-Charge.

S&F New parts for single/double/multistage pumps of capacity 60/75 HP as per manufacturer's composition of existing make of pump as below complete all as specified and directed by Engr-in-Charge.

Pump impeller made out as per existing complete all as specified and directed by Engr-in-Charge.

Pump shaft stainless steel shaft complete with check nut and keys complete all as specified and directed by Engr-in-Charge.

Shaft sleeves complete all as specified and directed by Engr-in-Charge.

Casing bearing complete all as specified and directed by Engr-in-Charge.

Bearing housing complete all as specified and directed by Engr-in-Charge.

Tyre coupling/star coupling complete all as specified and directed by Engr-in-Charge.

Gland cup with nuts and bolts complete all as specified and directed by Engr-in-Charge.

S&F New parts for single/double/multistage pump of capacity 30/40/50HP as per manufacturer's composition of existing make of pump as below complete all as specified and directed by Engr-in-Charge.

Pump impeller made out as per existing complete all as specified and directed by Engr-in-Charge.

Pump shaft stainless steel shaft complete with check nut and keys complete all as specified and directed by Engr-in-Charge.

Shaft sleeves complete all as specified and directed by Engr-in-Charge.

Casing bearing complete all as specified and directed by Engr-in-Charge.

Bearing housing complete all as specified and directed by Engr-in-Charge.

Tyre coupling/star coupling complete all as specified and directed by Engr-in-Charge.

Gland cup with nut and bolts complete all as specified and directed by Engr-in-Charge.

S&F New parts for single/double stage pump of capacity 15/20/25 HPas per manufacturer's composition of existing make of pump as below complete all as specified and directed by Engr-in-Charge.

Pump impeller made out as per existing complete all as specified and directed by Engr-in-Charge.

Pump shaft stainless steel shaft complete with check nut and keys complete all as specified and directed by Engr-in-Charge.

Shaft sleeves complete all as specified and directed by Engr-in-Charge.

Casing bearing complete all as specified and directed by Engr-in-Charge.

Bearing housing complete all as specified and directed by Engr-in-Charge.

Tyre coupling/star coupling complete all as specified and directed by Engr-in-Charge.

Gland cup with nut and bolts complete all as specified and directed by Engr-in-Charge.

S&F New parts for single/double stage pump of capacity 5/7.5/10 HP as per manufacturer's composition of existing make of pump as below complete all as specified and directed by Engr-in-Charge.

Pump impeller made out as per existing complete all as specified and directed by Engr-in-Charge.

Pump shaft stainless steel shaft complete with check nut and keys complete all as specified and directed by Engr-in-Charge.

Shaft sleeves complete all as specified and directed by Engr-in-Charge.

Casing bearing complete all as specified and directed by Engr-in-Charge.

Bearing housing complete all as specified and directed by Engr-in-Charge.

Tyre coupling/star coupling complete all as specified and directed by Engr-in-Charge.

Gland cup with nut and bolts complete all as specified and directed by Engr-in-Charge.

Lath/Mchining works of any type at workshop required for balancing of impller/for fixing of new parts to existing shfts required for proper setting and smooth functioning to achieve desired discharge of the pump for 60 to 75 HP pump complete all as specified and as directed by Engr-in-Charge.

All as per serial item No. 80.00 here-in-before but capacity of 30 to 50 HP motor complete all as specified and directed by Engr-in-Charge.

All as per srial item No.80.00 here-in-before but capacity of 15 to 25 HP motor complete all as specified and directed by Engr-in-Charge.

All as per srerial item No.80.00 here-in-before but capacity of 5 to 10 HP motor complete all as specified and directed by Engr-in-Charge.

Disconnecting electric connection of 60/75 HP motor, removing the UNSV motor from existing place by unscrewing the foundation bolts and nuts decoupling from the pump, setting aside and transporting to workshop for repairs including dismantling the motor,cutting/taking out burnt winding of stator, rotor, cleaning the slots, transporting back after repair/winding & re-assembling the same. Cost of loading, unloading & transportation shall be deemed included in the quoted rates. complete all as directed by Engr-in-Charge. Note: Winding of motor stator & rotor shall be measured & paid separately. (b) The rates quoted shall be deemed to include the cost of including/unloading, transportation, grease, nuts , bolts and washers of any size and shape as required at site and refixing of serviceable motor duly functional and testing complete at its existing location/position complete all as specified and directed.

All as per serial item No. 84.00 here-in-before but capacity 30/40/50 HP motor complete all as specified and directed by Engr-in-Charge.

All as per serial item No. 84.00 here-in-before but capacity of 15/20/25 HP motor complete all as specified and directed by Engr-in-Charge.

All as per serial item No. 84.00 here-in-before but capacity of of 7.5/5.0/2.0 HP motor complete all as specified and directed by Engr-in-Charge.

Removing the burnt out winding from the rotor and stator, cleaning the slots, providing high quality of class'B' paper insulation inside the slots, rewinding the motor of capacity 75/60/50/40/30/25/20/15/12/10/7.5/5/2 HP with super enamel copper wire of same size and guage as per existing rapping up with high quality cotton tape and varnising with super quality oil including drying upto desired temperature and desired time complete all as specified and directed by Engr-in-Charge. Note:- Cost of labour for winding deemed to be included in the rate quoted.

Supply and fixing in repair of 0.5 to 1 HP pumpset (including motor) by taking out from foundation , dismounting from base channels, strip opening all parts derusting , cleaning , overhualing etc for complete repair/replacement of spare parts such as impeller , shaft winding , bearings coupling , body etc and after repair reassembling of pumpset mounting and fixing on base channel , recoupling of suction & discharge line realignment , commissioning and testing complete all as specified and directed by Engr-in-Charge.

S&F of Pump bearing No. 6307 C3 complete all as specified and directed by Engr-in-Charge.

S&F of Pump bearing No. 6308 2RS1/C3 complete all as specified and directed by Engr-in-Charge.

S&F of Pump bearing No. 3307 ATN9 complete all as specified and directed by Engr-in-Charge.

S&F of Motor bearing No. 22312E complete all as specified and directed by Engr-in-Charge.

S&F in replacement of OFF load change over switch 800 Amps, 415 volts 4 pole with stainless steel enclosure inculding taking down the old existing change over switch complete all as specified and directed by Engr-in-Charge.

S&F in replacement of OFF load change over switch 630 Amps, 415 volts 4 pole with stainless steel enclosure inculding taking down the old existing change over switch complete all as specified and directed by Engr-in-Charge.

S&F in replacement of OFF load change over switch 320 Amps, 415 volts 4 pole with stainless steel enclosure inculding taking down the old existing change over switch complete all as specified and directed by Engr-in-Charge.

S&F in replacement of OFF load change over switch 200 Amps, 415 volts 4 pole with stainless steel enclosure inculding taking down the old existing change over switch complete all as specified and directed by Engr-in-Charge.

S&F in replacement of OFF load change over switch 100 Amps, 415 volts 4 pole with stainless steel enclosure inculding taking down the old existing change over switch complete all as specified and directed by Engr-in-Charge.

S&F in replacement of OFF load change over switch 63 Amps, 415 volts 4 pole with stainless steel enclosure inculding taking down the old existing change over switch complete all as specified and directed by Engr-in-Charge.

S&F in replacement of ON load change over switch 320 Amps, 415 volts 4 pole with stainless steel enclosure inculding taking down the old existing change over switch complete all as specified and directed by Engr-in-Charge.

S&F in relpacement of load line MCCB 630 Amps 4 pole 415 volts with adjustable thermal and fixed magnetic setting of breaking capacity 35/36KA, Ics=100% Icu including taking down the old existing MCCB complete all as specified and directed by Engr-in-Charge.

S&F in relpacement of load line MCCB 350 Amps 4 pole 415 volts with adjustable thermal and fixed magnetic setting of breaking capacity 35/36KA, Ics=100% Icu including taking down the old existing MCCB complete all as specified and directed by Engr-in-Charge.

S&F in relpacement of load line MCCB 200 Amps 4 pole 415 volts with adjustable thermal and fixed magnetic setting of breaking capacity 35/36KA, Ics=100% Icu including taking down the old existing MCCB complete all as specified and directed by Engr-in-Charge.

S&F in replacement of load line MCCB 160 Amps 4 pole 415 volts with fixed thermal and fixed magnetic setting of breaking capacity 35/36KA, Ics=100% Icu including taking down the old existing MCCB complete all as specified and directed by Engr-in-Charge.

S&F in replacement of load line MCCB 125 Amps 4 pole 415 volts with fixed thermal and fixed magnetic setting of breaking capacity 35/36KA, Ics=100% Icu including taking down the old existing MCCB complete all as specified and directed by Engr-in-Charge.

S&F in replacement of load line MCCB 100 Amps 4 pole 415 volts with fixed thermal and fixed magnetic setting of breaking capacity 35/36KA, Ics=100% Icu including taking down the old existing MCCB complete all as specified and directed by Engr-in-Charge.

S&F in replacement of power contactor 3 pole with AC coil AC-3 duty rating at 415 Volts 50 Hz, frame size1 suitable for 75 HP centrifugal pump set complete all as specified and directed by Engr-in-Charge.

M&L in replacement of PVC insulated heavy duty industrial cables single core copper conductor(flexible) PVC insulated cable 1100 volt nominal area of conductor 120 sqmm inculding taking down existing old unserviceable cable of complete all as specified and directed by Engr-in-Charge.

M&L in replacement of PVC insulated heavy duty industrial cables single core copper conductor(flexible) PVC insulated cable 1100 volt nominal area of conductor 50 sqmm inculding taking down existing old unserviceable cable of complete all as specified and directed by Engr-in-Charge.

M&L in replacement of PVC insulated heavy duty industrial cables single core copper conductor(flexible) PVC insulated cable 1100 volt nominal area of conductor 35 sqmm inculding taking down existing old unserviceable cable of complete all as specified and directed by Engr-in-Charge.

M&L for copper thimble suitable for 120 Sqmm single core copper cable including taking down the existing unserviceable one complete all as specified and directed by Engr-in-Charge.

M&L for copper thimble suitable for 70 Sqmm single core copper cable including taking down the existing unserviceable one complete all as specified and directed by Engr-in-Charge.

M&L for copper thimble suitable for 50 Sqmm single core copper cable including taking down the existing unserviceable one complete all as specified and directed by Engr-in-Charge.

M&L for copper thimble suitable for 35 Sqmm single core copper cable including taking down the existing unserviceable one complete all as specified and directed by Engr-in-Charge.

M&L for aluminium thimble of 300 sqmm size for cables all as specified and directed by Engr-in-Charge

M&L for aluminium thimble of 150 sqmm size for cables complete all as specified and directed by Engr-in-Charge.

M&L for aluminium thimble of 50 sqmm size for cables complete all as specified and directed by Engr-in-Charge.

S&F in replacement digital type Ampere meter (96mm x96 mm) complete with suitable CTs 0-300 Amps as per existing,complete all as specified and directed by Engr-in-Charge.

S&F in replacement of indicating lamps RYB as per existing, complete all as specified and directed by Engr-in-Charge.

S&F in replacement of digital type volt meter (96mm x96 mm) 0-500 volts as per existing, complete all as specified and directed by Engr-in-Charge.

Supply and laying DWC (Double wall corruguated) pipe 77/63 mm conforming to IS-14930/ IS-16205 for protection of earth strip/cable including necessary snap fit coupler reqd for fixing complete all as specified and directed by Engr-in-Charge.

Supply and laying DWC (Double wall corruguated) pipe 90/63 mm conforming to IS-14930/ IS-16205 for protection of earth strip/cable including necessary snap fit coupler reqd for fixing complete all as specified and directed by Engr-in-Charge.

Supply and laying DWC (Double wall corruguated) pipe 110/93 mm conforming to IS-14930/ IS-16205 for protection of earth strip/cable including necessary snap fit coupler reqd for fixing complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement of terminal boxes suitable for 75/60/50 HP motor as per existing specification including taking down the old existing terminal box complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement of terminal boxes suitable for 40/30/20 HP motor as per existing specification including taking down the old existing terminal box complete all as specified and directed by Engr-in-Charge.

Material , labour and fixing of earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4 mm dia galvanised iron or steel wire complete all as specified and directed by Engr-in-Charge.

Material , labour and fixing of earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 25 x4 mm dia galvanised iron strip complete all as specified and directed by Engr-in-Charge.

M & L for painting of pump and motor, frame including surface preparation by scrapping with emery paper and painting with one coat of red oxide primer and two coats of synthetic enamel paint of existing colour of approved make complete all as specified and directed by Engr-in-Charge.

S&F in replacement of gland packing type 3 of size 8 mm made of asbestos grip with silicon complete all as specified and directed by Engr-in-Charge.

S&F in replacement of gland packing type 3 of size 10 mm made of asbestos grip with silicon complete all as specified and directed by Engr-in-Charge.

Supply and laying in replacement of synthetic rubber insulated mats 10 mm thick for insulation purpose suitable for electrical shock safety of sizes 2 m x 1.2 m complete all as specified and directed by Engr-in-Charge.

S&F in replacement of MS stud bolts of existing size suitable for pumps and motors of various capacity installed at installations complete all as specified and directed by Engr-in-Charge.

S&F in replacement of grouting nuts and bolts of existing size suitable for pumps and motors foundation of various capacity installed at installations complete all as specified and directed by Engr-in-Charge.

M&L for cement concrete type B-2, 1:2:4 (40mm graded aggregate) as in sub base filling and mass concrete complete all as specified and directed by Engr-in-Charge.

M&L for cement concrete in foundations, type E-2, 1:5:10 (40mm graded aggregate) as in filling and mass concrete complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repacement of Cast iron Foot valve Flanged with strainer of 150 mm dia including all types of fittings conforming to IS specification complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repacement of Cast iron Foot valve Flanged with strainer of 100 mm dia including all types of fittings conforming to IS specification complete all as specified and directed by Engr-in-Charge.

Supply only lithium base grease AP3 in 20 Kg pack suitable for application to ball bearing with operating temperature 30 to 120 degree celsius drop point 174 degree celsius, colour light fawn complete all as specified and directed by Enr-in-Charge.

Supply only cotton waste coloured Grade "A' for cleaning rags in 25 Kgs bag complete all as specified and directed by Engr-in-Charge.

Repair/ maintenance and replacement of defective parts of air compressor set of capacity 15 HP. Re-greasing all grease points, tighten the nuts, bolts of air comressor set, check the all bearings and repleced with new bearing if defected, check tighten the 'V' belts of the set and replaced the same if defcted and examine the compressor defective parts and replace with new parts complete all as specified and directed by Engr-in-Charge.

All as per serial Item No. 141.00 here-in-before but of size 10 HP complete all as specified and directed by Engr-in-Charge.

M&L for writing of "SAVE WATER" with symbol of water drop with tap on Overhead Tank / Sump with blue colour on white backround as per existing complete all as specified and directed by Engr-in-Charge.

M&L for replacement of heavy duty Chemical Dosing system suitable to inject solution upto 25 LPH working pressure 10 kg/cm² comprising of dosing pump fitted on service tank of capacity 100 ltrs for injecting calcium hypochlorite solution and connected with chlorine dosing preparation tank of cap 170 litres coupled with electric motor driven agitator with motor capacity 0.5 HP, 1440 rpm assembly , agitator with S S sweep blade duly FRP coated, complete unit including starter complete all as specified and directed by Engr-in-Charge.

DAVINDER SINGH

ATUL TRADING CO

PROACH ASSOCIATES BUILDERS & ENGINEERS

VISHWA MITTAR PACHYALA

BARU ENTERPRISES

R C TRADERS

PAUL TRADERS

MOHAN LAL AND SONS

slathia construction works