ITI(S)/e-Tender/02/ 2021-22/314

Measuring Steel Tape (5 meter)

Screw Driver Insulated (4mm X 150 mm, Diamond Head)

Screw Driver Insulated (6mm X 150 mm)

Electrician screw driver thin stem insulated handle (4mm X 100 mm)

Heavy Duty Screw Driver insulated (5mm X 200 mm)

Electrician Screw Driver thin stem insulated handle (4mm X 250 mm)

Punch Centre (9mm X 150 mm)

Knife Double Bladed Electrician (100 mm)

Neon Tester (500 V)

Steel Rule Graduated both in Metric and English Unit (300 mm with precision of 1/4th mm)

Hammer, cross peen with handle (250 grams)

Electrical Symbol and Accessories Charts

Pipe vice Cast Iron with hardened jaw open type (100 mm)

Table Vice (100 mm jaw)

Hacksaw frame (with blade) (Fixed 150 mm)

File flat (200 mm 2nd cut with handle)

File half round (200 mm 2nd cut with handle)

File round (200 mm 2nd cut with handle)

Pliers flat nose insulated (200 mm)

D.E. metric Spanner Double Ended (6 - 32 mm)

Gauge, wire imperial stainlees steel marked in SWG & mm (Wire Gauge - Metric)

Crimping Tool (1.5 sq mm to 16 sq mm )

Crimping Tool (16 sq mm to 95 sq mm) (Hydraulic)

Wire stripper adjustable length

Hammer, ball peen With handle 500 gm

Tool kit Box/bag portable

Allen Key (set of 12 pieces (2mm to 14mm))

Scissors blade (150 mm)

Electrical loads: set of Incandescent lamp, Tube light, CFL, LED light, Heater and Geyser

Torque wrench (8N-m to 15N-m)

Try Square (150 mm blade)

Wire Cutter and Stripper (150 mm)

Earth Plate (60cm X 60cm X 6mm GI Plate)

Earth Plate (60cm X 60cm X 3.15mm Copper Plate )

Out Side Micrometer (0 - 25 mm least count 0.01 mm)

Tap set (Different size)

Die for Threading (Different sizes )

Fuses (HRC type)

Cables :Twisted Pair (1 mtr)

Underground Feeder Cable (1 mtr )

Metallic Sheathed Cable (1 mtr )

Three core wire (230 V, 15 A) (100 mtr Length)

Battery cable (7.5 sqmm) (100 mtr Length)

Resin cored Solder (250 gm)

pins (5 mm) (200 gm)

lugs (7.5 mm)

Hacksaw blades (200 mm), (HSS)

Bolts, nuts, anchor bolts, washers, screws, other pins, lugs etc (10 Nos each)

Plumbing tools

Solar Insulation meter

Pyrheliometer

Lux meter (Lux meter LCD read out 0.05 to 7000 Lumens with Battery)

Magnetic Flux Meter (0- 500 tesla)

Soldering Iron (25Watt, 230V)

Soldering Iron (120Watt ,230 Volt)

Temperature controlled Soldering Iron (50 Watt 230 Volt)

Thermometer Digital (0° C - 150° C)

Weather monitoring station (To Monitor and record Sunshine, Wind velocity, temperature,rainfall etc. With Software)

Solar cell based sunlight radiation meter (For Solar power measurement up to 2000 w/square meter)

Magnetic compass

Cut models of photo voltaic cell assembly

Solar simulator for solar cell characteristic study (To study IV curve of a solar cell of minimum 2 watt under variable illumination, temperature and suitable load)

IV Curve tester

Sun path finder (Sun Path Finder)

Solar energy trainer with grouping of solar cells (To group (Series or paralle) at least six solar cell each with minimum 2W with Suitable loads)

Solar photovoltaic module (75 W amorphous silicon module)

Solar photovoltaic module (250 W thin film module)

Solar panels (250 Wp)

Solar Charge controller with Dusk to Dawn automatic switching (12V, 10A)

Solar charge controller with manual switch ( Day lighting) (12 V 10 A)

Array junction box (for connecting 250W x 4 Nos. solar panel with DC fuse, DC MCB, and surge suppressor protection)

Solar lantern (LED type)

Solar lantern assembly sets

Clinometer (for Angle measurement)

Spirit level (For floor level check)

Anemometer (for wind speed measurement)

A.C. Voltmeter M.I (0 –500V AC)

Volt meter (0 - 30V)

Volt meter (0 - 100V)

Ammeter MC (0 - 1A)

Ammeter MC (0 - 5A)

Rheostat (0 -1 Ohm, 5 Amp)

Rheostat (0 -10 Ohm, 5 Amp)

Rheostat (0- 25 Ohm, 1 Amp)

Rheostat (0- 300 Ohm, 1 Amp)

A.C. Energy Meter (Single Phase, 10 A, 240 V induction type)

Kilo Wattmeter Analog (0-1.5-3KW, pressure coil rating- 240v/440v, current rating-5A/10A Analog, portable type Housed in bakelite case)

Phase Sequence Indicator (3 Phase, 415 V)

DC LED Lamp (3W, 5W, 10W (50 Nos each))

DC Pump (24 V)

PWM Controller

MPPT Charge Controller

Inverter with Battery (1 KVA with 12 V Battery Input- 12 volt DC, Output- 220 volt AC)

Solar PCU (Off grid 1 KW MPPT Sine wave Solar Power Conditioning Unit)

Used water treatment solar plant demonstrator kit (1 liter Capacity)

solar DC pump ( 1 HP)

Rechargeable battery (12V 100Ah)

Rechargeable battery (12V 7Ah)

Rechargeable battery (6V 5Ah)

LED lights (6 V DC)

Rubber gloves

Cotton gloves

Gum boots

Safety Goggles

Safety Helmet

First Aid kit

Fire Extinguisher CO2 (2 KG)

Fire Buckets (Standard size)

Rule Steel {300 mm both in inch and mm}

Rule Wooden {4 fold, 600 mm}

Hacksaw Frame adjustable {for 250 to 300 mm}

Scriber {200 mm}

Centre punch { 100 mm}

Chisel Cold, flat { 20 mm}

Hammer ball pein { 800 grams}

Hammer ball pein {50 grams}

File flat rough {300 mm}

Level spirit wooden {300 mm}

Plumb bob {50 grams}

Trowel C-125-1 S: 6013

Stillson wrench {200 & 350 mm}

Screw Driver {250 mm}

Wooden Mallet small 1 S: 2022

Cutting pliers 200mm 1 S : 3650

Steel tape {5 M}

Surface plate {400 X400 mm Grade 1}

Marking Table {900X600X900mm high}

Combination set {200 mm}

Hand Vice, {Jaw 50 mm}

File Flat, Smooth {200 mm}

File Half Round, Rough {300 mm}

File, Square, rough {250 mm}

File, Square, Smooth {200 mm}

File Triangular Rough {250 mm}

File Flat Rasp {250 mm}

File Triangular Smooth {200 mm}

Chisel Cold Flat {20 mmX300mm}

Chisel Cross Cut {6X150 mm 1 S-402}

Chisel Round Nose {3X150 mm 1 S -402}

Chisel Diamond Point {6X150mm}

Tap and Die set to cut B.S.F threads {of sizes No.6 to M-12}

Tap and Die set to cut B.S.W. threads {of sizes No.6 to M-12}

Tap and Die set to cut metric threads {of sizes No.6 to M-12}

Screw Pitch gauge to cover above threads

Punch, Letter set

Punch, Number set

Saw Plumber {300mm}

Spanner monkey {up to 50mm}

Stove melting solder

Cutter ,Pipe, wheel type {6mm to 25mm}

Oil stone {150X50X25mm}

Soldering Iron , Copper, Bit, Fire heated , Hatched , Straight, 500 grams

Snip Straight {250mm}

Snip bend {250mm}

Try square {200mm}

Inside Caliper {150mm}

Caliper outside {150mm}

Odd leg calliper {200mm}

Tenon saw

Hand Saw.

Mortise Chisel

Firmer Chisel

Mallet Medium IS: 2922

Jack plane

Pliers combination, {200 mm}

D. E. Spanners 7X8, 10X11, 13X1. 7, 19X2.2, 24X27 IS:2028

Pipe vice {to grip up to 77 mm is -2587}

Stillson pattern pipe wrenches {450 mm to take pipe up to 52 mm dia 1 s -4003}

V' Blocks with clamps {80/7-63A IS 2949}

Scribing Block, Universal, {300 mm}

Goggles pair welder {100 mm}

Brush Steel Wire {150X 50 mm}

Blow lamp {500 mili litre}

Washer cutter

Mirror {100X150 mm}

Scribing gauge

Soil pot with brush

Pot- Hook

Branch Gimlets

Bending Spring

Plumbers Laddie

Tool caulking set of S

Plumbers' metal melting pot {10 kg}

Pipe stock and dies {complete with stocks, bushing, bushing holders, Taps and wrenches sizes covered, to suit pipes of bore dia 6,8,10,20,25,32,40,8i50mm}

Stillson pattern pipe wrenches {300mm to take pipe 20 mm to 32mm}

Chain :pipe wrench {90mm -650 is 4123}

Adjustable, spanner, { A-375, IS- 6149}

Anvil {50 or 63 kg. IS-510}

Pipe bender, manually operated

Leg vice, {75mm jaw on Stand IS -2588}

Hand drill 6mm capacity with drill chuck (Electric)

Drill Twist (straight shank ) { 3mm to 6mm}

Portable forge , {450mmwith hand blower}

Flat smithy tong

Fire Extinguisher

Fire Buckets with stand

Sight rail and bonning rod

Rachet pipe die 15 mm to 32 mm

Double face hammers

Dormat

Pickaxe

Spade

Girmale

Pipe bender(Hydraulic type)

Ring guage {15 mm}

Ring guage {20mm}

Ring guage {25mm}

Ring guage {32mm}

Bath tub small size

Wash Basin {(16"X14"X10")Equivalent metric}

Water Heater {10 litres}

Water closet (European type p) complete with over head cistern

Water closet (Indian type ) complete with over head cistern

Urinal wall type complete with automatic system

Water meter

Table welding 1200X 750 mm with fire bricks top and stand {1200X 750 mm}

working bench {2400x1200x750mm with 4 voice 125 mm jaws}

Steel lockers {with 8 drawers Metal rack (1800x1500x450mm)}

Metal rack {1800X1500X450mm}

Stool

Black Board with glass

Steel Almirah (large)

Instructor table

Instructor chair

Gas Welding set with oxygen acetylene cylinder

Hammering drilling machine

Electric PPR pipe welding machine

Electric pump, {1 HP}

D.E. PEDESTAL GRINDER WITH TWO WHEELS 175MM ROUGH AND SMOOTH

Hydraulic pressure machine for testing leakage in Gl pipe fittings etc.

Bench drilling machine {with chuck and key upto 15mm capacity}

Solar water heater system

Sewing Kit {screw driver, 2 bobbins and one bobbin case etc}

Fabric {cotton muslni compulsary and other fabrics for practicing. Surplus fabric, the quantity and variety may vary}

Fabric/Trims And Accessories Swatch File

First Aid Box

Shears {Scissors,shears , etc 5 fabric cutting and 5 paper cutting}

Seam Ripper

Iron And Iron Table

Tracing Wheel

Calculator

Spec Sheet

Size Chart {Various size}

Mannequin {Any size mediumpreferably woman}

Dexterity Test Kit

Trimmers

Baskets/Boxes For Storing

Notcher {1/4" X1/6"}

Thimble {also depend on type of machine}

Hanger {Wooden and plastic material}

Sewing Threads {2 or 3 ply etc, quantity and variety may vary.eg: 400/spool, cotton poly}

Hand Needle {Various gauges, quantity and varity may vary}

Machine Needle {Various gauges, quantity and varity may vary depending on fab and machine}

Needle Threader

Tools For Broken Needle Protocol {Magnet, Tweezers etc.}

First Aid Box

Fire Extinguisher {always filled}

Trims And Accessories {3 packs each type. The quantity may vary(buttons, laces , zippers etc)}

Machine Folders with Attachments {also depend on type of machine}

Machine Oils {qty may vary}

Types Of Scales {normal ruler,hip curve,leg curve, L Scale}

Measuring Tape {150cm}

Cutting Table {wooden}

Students Stools For Sewing {wooden or plastic of good brands}

Teachers Table {30"X20"X30"}

Teacher's Chair

Display Board

White /BlackBoard

Students Chairs With Table Arms

Sewing Machine {Domestic/ industrial/motorized}

Inverter based Welding Machine with all accessories {300 A. OCV 60 – 100 V, 60% duty cycle }

AC/DC GTAW welding machine {With water cooled torch300 A, Argon regulator, Gas hose, water circulating system with water cerculating pump and water ontainer, Capacity- 6.5 ltr., Power Factor-0.93, OCV-65Volt., Main supply-415V+/-15 V. 3 Phase. 50 Hz., Dranage Capacity- 6ltr. Per min, Max pressure-2.4 Bar., Input Power -18.7 KVA, Rated Input-26amps., Permitted Load- 400A at 60% duty Cycle & 310 A at 100% duty Cycle., Efficiency at Max. current-85% , Current Range-20-400Amps in TIG & 25-350 Amps in MMAW.}

AG 4 Grinder {Item Shape Recvtangle, Weight- 1.50 KG, Rotational Speed-12000Rpm, Wattage- 670W.}

Lathe S.S. & S.C. (All geared head stock) with minimum specification as: 150 mm center height, to admit 750 mm between centers. Machine to be motorized and supplied with coolant installation, 4-jaw Independent chuck 150 mm, 3-jaw self-centering chuck 150 mm, fixed steady, traveling steady, face plate, driving plate, 4-way tool post, quick change gear box for Metric or British threads, live and dead centers with taper attachments, Motor Capacity - 5.5 KW {Speed No-16, Speed range: 30-2000 rpm, arrenge with foot brake/emergency switch, machine lighting arrengement, spindle bore 42 mm.}

Steel Rule with metric & British

Try Square.(150 mm blade)

Caliper inside spring type.(150 mm)

Caliper hermaphrodite spring type(150 mm)

Caliper outside spring type(150 mm)

Divider spring type (150 mm)

Scriber (150 mm)

Centre Punch(10 mm and Length - 120 mm)

Screw driver(150mm insulated flat type)

Chisel cold flat (20 mm X 150 mm High )

Hammer ball peen with handle( 450 grams (1 lb)

Hammer ball peen with handle. 220 grams (1/2 lb)

File flat - second cut 250 mm

File flat smooth 250 mm.

File half round second cut 150 mm.

Safety goggles.

Dot punch 100 mm

Spirit Level metal Type - 2 300 mm Basic Length

Stud Extractor EZY - out Set of 8

Combination Set 300 mm

Taps and dies complete set in box. Whitworth

Taps and dies complete set 5, 6, 8, 10 & 12mm set of 5

File feather edge smooth 150 mm

Feeler gauge Gauge Feeler / Thickness

File triangular second cut. 200 mm

File flat second cut safe edge. 300 mm

File half round second cut. 250 mm

File hand second cut. 150 mm

File card. 3"x5" size, brass or steel wire

Spanner adjustable 150 mm

Chisel cold crosscut& diamond point. 9 mm X 150 mm

Chisel cold flat 9 mm X 100 mm

Chisel cold round nose 9 mm X 100 mm

Lathe tools H.S.S. tipped set.

Lathe tools bit. 6 mm x 75 mm HSS/Carbide

Lathe tools bit. 8 mm x 75 mm HSS/Carbide

Lathe tools bit. 10 mm x 75 mm HSS/Carbide

Arm strong type tool bit holder. Straight

Pipe cutter wheel type. 6 mm to 25 mm

Micrometer outside. 0 - 25 mm

Micrometer outside. 25 - 50 mm

Micrometer outside. 50 - 75 mm

Vernier caliper 150 mm

Screw pitch gauge Metric 0.25 to 6 mm

Marking table (Mild steel) 900X900X900 mm

Universal scribing block. 220 mm

Angle plate 150 X 150 X 250 mm

Punch letter set. 3 mm

Portable hand drill (Electric) 0 to 13 mm Capacity

Drill twist straight shank 3 mm to 12 mm by 0.5 mm

Interchangeable ratchet socket set 12 mm driver, sized10-32

Glass magnifying 75 mm

Machine Reamer parallel (Helical flute) 12 - 16mm set of 5.

Adjustable pipe die set BSP cover pipe size 1" or 3/4"

Machine vice - Swivel Base 100 mm

Machine vice - Swivel Base 125 mm

Sleeve drill Morse No. 0 - 1, 1 - 2, 2 - 3, 3 - 4, 4 - 5

Fire extinguisher (For 4 Units) CO2 type, 3 kg capacity

Fire buckets.

Machine vice. 100mm

Torque wrench (Standard/Ratchet type) 14 to 68 Nm

Power tools for fastening Capacity 10-18mm

Different Profile gauges (Plate type)

Knurling tool (Diamond, straight )

Indexable boring bar with inserts 1" shank

Temperature gauge Range 0 - 150°C

Dowel pin (straight) Dia. -1” Length -4" (Mat:Stainless Steel)

Standard Tap screws M3, M4, M5, M6, M8, M10,

Lapping plate Dia. -6"

Medium carbon Heat treated alloy steel

Caps screws M6, M8, M10, M12

Drill gauges

Stop cock 25NB (2-way, Threaded end)

Slip-on Forged steel Flange 150NB, ANSI-B16.5,Class#150

Pipe threading die with handle Ratchet type Die head of

Pulleys (for V-belt or Flat belt) to fit on 50mm dia. Shaft

V-belt and Flat belt to fit on pulley

Packing gasket PTFE gasket roll small size

Washer, clutch, keys, jib, cotter &circlip minimum 25mm size, carbon

Hollow punch Straight Shank Hollow Punch Sets 5-12mm

Bearing different types each type of diameter 25mm (min.)

Lifting sling 8mm Nominal Dia. Single leg sling

Bearing extractor Universal gear puller 2 or 3 jaws adjustable

Pulley extractor - do -

Aviation Snips straight Cut 300 mm

Flat headed hammers with handle

Snip bent Left Cut 250 mm

Stake hatchet with Leg. 300 X 200 X 20 mm

Stake grooving. 100 X 100 X 300 mm

Slip Gauge as Johnson metric set. 87 Pieces Set

Gauge snap Go and Not Go 25 to 50 mm by 5 mm, Set of 6 pieces

Gauge plug Single ended 5 to 55 by 5 mm. Set of 11 pcs.

Gauge telescopic set. 8 - 150 mm

Dial test indicator on stand 0.01 mm least count

Sine bar 125 mm

Dial Vernier caliper. (Universal type) 0 - 300 mm, LC 0.05 mm

Depth micrometer. 0-25 mm Accuracy 0.01 mm with

Digital vernier caliper. 0 - 150 mm with least count 0.02mm

Comparators Gauge - Dial Indication with

Engineer's try square (knife-edge) 150 mm Blade

Surface roughness comparison plates N1 - N12 Grade

Digital Vernier caliper 0 - 200 mm L.C. 0.01 mm (Optional)

Adjustable pipe chain tonge to take pipes up to 300 mm

Drilling machine bench Sensitive 0-12 mm cap

Compressor unit suitable for Pressure: 8 bar, {suitable for Pressure: 8 bar, Delivery: 50 lpm (or more), Reservoir capacity: 24 Liters (or more), 230V,50Hz,withpressure regulator and water separator}

Pneumatic Trainer Kit, each consisting of the specified matching components and accessories: {I. Single acting cylinder Max. strokelength50mm,Boredia.20mm= 1No, II. Double acting cylinder Max.strokelength100mm,Bore dia 20 mm, magnetic type=1 No, III. 3/2-wayvalve manually-actuated, Normally Closed =2 Nos, IV. 3/2-wayvalve pneumatically-actuated, spring return =1 No, V. One-way flow control valve= 2 Nos, VI. 5/2-wayvalve With manually-operated switch = 1 No, VII. 5/2-wayvalve pneumatically-actuated, spring return =1 No, VIII. 5/2-way pneumatic actuated valve Double pilot=1 No, IX. 3/2-way roller lever valve Direct actuation Normally Closed= 2 Nos, X. Shuttle valve(OR)=1No, XI. Two-pressure valve(AND)=1 No, XII. Pressure gauge 0-16bar=1 No, XIII. Manifold with self-closing NRV,6-way= 1 No, XIV. Push button station for electrical signal input with 3 illuminated momentary-contacts witches(1NO+1NC)and1illuminated maintained-contacts witch(1NO+1NC),Contact load2A=1 No, XV. Relay station with 3 relays each with 4contactsets(3NO+1NCor Change-over type),5A=1 No, XVI. 3/2-way single solenoid valve With LED=1 No, XVII. 5/2-way single solenoid valve With manual override and LED=1No, XVIII. 5/2-way double solenoid valve With manual over ride and LED=1 No, XVIII. 5/2-way double solenoid valve With manual override and LED=1 No, XIX. Power supply unit, Input voltage 85–265 VAC, Output voltage: 24 V DC, Output current: max. 4.5 A, short-circuit-proof. XX. Profile plate, Anodised Aluminum 1100x700mm,withcarriers,mounting frames and mounting accessories (To befitted dontothepneumatic workstation)=1 Set. }

Pneumatic Workstation with 40 square mm aluminum profile legs, {wooden work surface, and one pedestal drawer unit having 5 drawers, each with handles and individual locks, on metallic full panel drawer slide: (1) Worktable – Size(Approx.)L1200mmXW900mmXH900mm,withfourcastorwheelsincluding two lockable wheels at the front side, (2)Drawer – Size (Approx.) –L460mmxW495mmxH158mmeach,andoverall Size of Drawer unit(Approx.) L470mmxW495mmxH825mmand (3)Drawer slide height (Approx.)85mm. }

Carrier for mounting components, such as PB & relay boxes.

Cut section model for pneumatic components

Hydraulic Trainer Kit, each consisting of the following matching {I. Hydraulic Power pack with (1) external gear pump having a delivery rate of 2.5lpm, (approx.) @ 1400 rpm operating pressure 60 bar, coupled to a single-phase AC motor(230VAC)having start capacitor and ON/OFF switch and overload protection,(2)pressurereliefvalveadjustablefrom0 –60bar,(3)oilreservoir,≥5litres capacity having sight glass, drain screw, air filter, And P and T ports.= 1 No II. Pressure relief valve pilot-operated.= 1 No III. Drip tray, steel size1160mmx760mm..= 1 No IV. Pressure Gauge Glycerin-damped, Indication range of: 0–100bars.= 1 No V. Four-Way distributor With five ports, equipped with a pressure gauge.= 1 No V. Double acting hydraulic cylinder with a control cam, Pistondiameter16mm,Pistonroddiameter10 mm, Strokelength200mm..= 1 No VI. Suitable Weight For vertical loading of hydraulic cylinder.= 1 No VII. Mounting kit for weight For realizing pulling and Pushing load..= 1 No VIII. 3/2-way directional control valve With handle veractuation..= 1 No IX. 4/2-waydirectionalcontrolvalve With handle veractuation..= 1 No X. 4/3-waydirectionalcontrolvalve closed-centre position with handle veractuation..= 1 No XII. Non-return valve..= 1 No XIII. Pilot-operated check valve Pilot to open..= 1 No XIV. One-way flow control valve With integrated check valve..= 1 No XV.T-Connector with self-sealing coupling nipples (2 Nos.) and quick coupling socket(1 No.)..= 2 Nos XVI. Profile plate, AnodisedAluminium,1100x700mm,withcarriers,mounting frames and mounting accessories (To befitted onto the Hydraulic work station).= 1 Set}

Hydraulic Work station {with40squaremmaluminiumprofilelegs,woodenwork surface, and one pedestal drawer unit having 5 drawers, each with handles and individual locks, on metallic full panel drawer slide: (1) Worktable – Size(Approx.)L1200mmXW900mmXH900mm, with four castor wheels including two lockable wheels at the front side, (2)Drawer – Size (Approx.) –L460mmxW495mmxH158mm each, and overall size of Drawer unit(Approx.)L470mmxW495mmxH825mmand (3)Drawer slide height (Approx.)85mm.}

Cut-section models for hydraulic components

SUSHAMA ELECTRONICS

Arati Trading

Arati Trading

SUSHAMA ELECTRONICS