CONSTRUCTION OF PRINCIPAL CABIN AND URINAL BLOCK AT VILLAGE SHELGAON ATOL, TQ. CHIKHALI DIST. BULDANA.

Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary backfilling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means (SSR Item no. 21.02)

Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking an spreading as directed, dewatering, preparing the bed for the foundation and necessary backfilling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50 m) By Mechanical Means (S.S.R. Item No.21.06)

Providing soling using 80 mm size trap metal in 15cm. Layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. (S.S.R. Item No. 21.40)

Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) (SSR Item No.24.01)

Providing and laying in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand (S.S.R. Item No.25.11)

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand (S.S.R. Item No.25.31)

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand (S.S.R.Item No.25.50)

Providing fly ash brick masonry with conventional / I.S. type fly ash bricks in C.M. 1:6 in foundation and plinth including bailing out water manually striking joints, racking out joints watering and scaffolding etc.complete. (S.S.R. Item No.27.12)

Filling in plinth and floors with contractors material/ brought from outside and approved by Engineer incharge in layers of 15cm to 20 cm including watering and compaction etc. complete. (SSR Item No.21.37)

Providing and laying damp proof course 50 mm thick in M20 cement concrete layer and bitumen/ using cement with water proofing compound curing, formwork etc. complete. (SSR Item no 31.01)

Providing and fixing M40 grade thick vibrated pull cast or similar type concrete frame with chamfer conforming to I.S. 65241983 having 6 mm dia. bars 3 Nos. And stirrups @250 mm c/c and fixing in wall with 6 Nos of hold fast of 12 mm dia bars 500 mm long including primer and oil painting etc, complete) frame size 60 mm x 100 mm. (SSR Item No. 39.56)

Providing fly ash brick masonry with conventional / I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete (SSR Item No.27.13)

Providing Second class fly ash brick masonry with conventional /I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of two bars of 6mm diameter/ two hoop iron strips 25mmx1.60 mm at every third course, properly bent and bounded at ends scaffolding raking out joints and watering etc. complete. (S.S.S. Item No.27.14)

Providing and fixing steel ventilator fully glazed partly fixed as per detailed drawing without hot dip zinc coating including fabricating glazing with plain / obscured glass panes 5mm thick and approved type and quality and iron oxidized fixture sand fastening oil paint 2 coats etc. complete. (SSR Item no.39.29)

Providing and fixing mild steel grill work for windows, ventilators etc. 20 Kilogram/One Square Metre as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. (SSR Item no. 40.01)

Providing and laying Cast in situ/Ready Mixcement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) (SSR Item no. 26.05)

Providing and laying Cast in situ/ Ready Mix cement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. slabs and landings as perdetailed designs and drawings including steel centering, formwork, cover blocks, laying/ pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Panmixer) etc. complete.With fine aggregate (Crushed sand VSI Grade) (SSR Item no.25.70)

Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawing sand schedules .including cutting, bending, hooking the bars,binding with wires or tack welding and supporting as required complete. (SSR Item No.26.33)

Providing water proof plaster in W.C. and bath 12mm thick for dado in cement mortar 1:3 with neat finishing, floating using waterproofing compound at the rate of 1Kilogram. per bag of cement of approved make and manufacturer and curing etc.complete. (Excluding Tiles) (As directed by Engineer in Charge) (SSR Item no.31.06)

Providing and fixing black kadappa stone as shelves 25mm. Thick machine polished, extending the polish upto 20cm width on lower side, rounding corners, laying in position jointing with bedding cement mortar 1:4 proportion curing etc etc.complete. (S.S.S. Item No.33.23)

Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. (S.S.S. Item No.32.04)

Providing internal cement plaster 20 mm thick in Single coats in cement mortar 1:5 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. complete (SSR Item No.32.06)

Providing and laying vitrified mirror/ glossy finish tiles decorative type having size 590mm to 605mm x 590mm to 605mm of 8 to 10mm thickness and confirming to IS. 15622-2006 (group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete. (SSR Item no.33.40)

Providing and laying Antiskid Ceramic tiles of approved quality of size30cmx30cm and confirming to IS15622-2006 (Group-BIIA)for antiskid flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete. (SSR Item No.33.67)

Providing and laying chequered tiles of approved quality of size 30cmx30cm, confirming to corresponding I.S. for flooring in required position laid on a bed of 1:4 cement mortar including cement float,filling joint with cement slurry cleaning curing etc. complete. (SSR Item no.33.66)

Providing and laying ceramic tiles having size 30cm.x45cm. confirming to corresponding I.S. for dado and skirting in required position with ready made adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. (S.S.S. Item No.32.26)

Providing andfixing in position. (as per I.S.1868/1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension 63.50x38.10x1.02mm atweight 0.547 Kilogram/ One Running Metre. and window frame bottom track section 61.85x31.75x1.20 mm at weight 0.695 Kilogram / One Running Metre. Top and side track section 61.85x31.75x1.30 mm at weight 0.659 Kilogram/ One Running Metre. The shutter should be of bearing bottom 40x18x1.25 mm at weight 0.417 Kilogram/ One Running Metre. Interlocking section 40x18 x1.10 mm at weight 0.469 Kilogram/ Running metre. And handle section 40x18x1.25mm at weight 0.417 Kilogram/ One Running Metre. and top section 40x18x1.25mm at weight 0.417 Kilogram/ Running metre. As per detailed drawings and as directed by Engineer incharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted invertical section of shutter including 5mm thick plain glass with all required screws and nuts etc, complete. With colour Anodising without box. (SSR Item no. 39.38)

Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete. (SSR Item no. 32.34)

Providing and applying two coats of exterior acraylic emulsion paint confirming to corresponding I.S. of approved manufacture and of approved colour to the plastered surfaces including cleaning, preparing the plaster surface, applying primer coat, scaffolding if necessary , and watering the surface for two days etc complete. (SSR Item no. 35.25)

Providing and fixing factory made panelled door shutter in single leaf 35mm thick style and rail without ventilator with CCTW panels12mm thick including wrought iron hold fast and stainless steel fixtures with oil painting 3 coats etc. complete. (SSR Item no.39.13)

Providing and fixing mild steel grill railing weighing 20 Kilogram/ One Square Metre. with PVC handrail cover and newel post for staircases, including fabricating, fixtures, drilling holes in concrete/ other surface, erecting the grill work, necessary welding, fixing by nuts and bolts, fixing PVC handrail cover,with one coat of anticorrosive paint and two coatsof oil painting with approved colour andshade, remaking the damaged surface, cleaning, etc. complete. Spec. One Number : As directed by Engineer in charge. (SSR Item no.40.11)

Providing and fixing fiber glass reinforced polyster door shutter 35 mm thick as per IS 14856 (2000) (Reaffirmed 2006) without ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, etc (SSR Item No.39.59)

Providing and fixing Orissa type white glazed earthenware 575 mm water closet pan including S trap with earthenware foot rests, cast iron soil and vent pipe upto outside face of the wall 1:2:4 brick bat lime concrete bedding without flushing tank and its accessories etc. complete (SSR Iten no. 42.30)

Providing and fixing on walls/ ceiling/ floor 20 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. (SSR Item No.42.56)

Providing and fixing 75 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete. (S.S.R. Item No.42.51)

Providing and fixing on walls/ ceiling/ floor 25 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. (SSR Item No.42.57)

Providing and fixing H.D.P container one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet, outlet over flow pipe inclusive of all tanks capacity between 200 to 1000 liters (SSR Item No.42.53)

Providing and fixing wall hung white wash basin of size 550 x 400 x 195 mm with pillar cock having flow rate upto 6.0Litr/Minute, C.P. Angular stop cock long thread of Jaquar/ Cera/ Hindware/ Perryware or equivalent make, including SS bottal trap of approved make etc complete as directed by Engineer incharge. (Make shall conform to manufacturer's Green product and shall got approved from the Engineer In Charge.) (SSR Item No.48.32)

Providing and fixing hume pipe septic tank 900mm diameter with vent pipe and cap including necessary (including excavation and laying) (SSR Item No. 42.18)

Providing and fixing false ceiling of 15mm thick as per drawings including powder coated G.I. wall angle

of 20mmx20mmx0.60mm size, G.I. grid runners of size15mm x38mm at 600mm center to center both ways and suspended using G.I. 3mm wire including fixing using butterfly clips and fasteners including transporting, scaffolding all necessary labour and machinery, finishing etc. complete. (SSR Item no. 38.19)

Providing and fixing 15mm diameter PVC Aqua kraft type of approved make super bib tap with flange including all accessories etc complete. (SSR Item No. 43.35)

Royalty Metal H B Murum

Royalty sand

Compressive Strength of C.C. Cube (Set of 3 cubes)

Water Absorption, (Set of 5 bricks), Compressive strength, (Set of 5 bricks), Efflorecence (Set of 5 bricks)

Water Absorption, Modulus of Rupture (Set of 6 Tiles)