REPAIR AND REPLACEMENT OF SUBMAIN WIRING, DBs, INTERNAL FITTINGS AND CONNECTED ACCESSORIES FOR OTM ACCN AT NIWARU MIL STN

Amount

Taking down carefully surface aluminum /copper point wiring, casing capping /PVC concealed conduit for (light, fan, socket, bell or power) including fixture and fittings such as switches, ceiling rose, regulators, sockets, light fittings etc and making good disturbed surfaces complete all as specified and directed.

M&L for point wiring with two single core 1100 volts grade PVC insulated FRLSH multistranded copper conductor cable 1.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) connected to common earth dolly, drawn into and including concealed rigid non metallic PVC conduit medium grade of size not less than 20mm dia ISI marked ivory colour with all conduit fittings / fixing accessories concealed in wall/ roof/floor incl 1.6mm thick modular cadmium plate sunken box and incl white modular cover plates with frame for mounting modular switches, sockets, fan regulators etc for one light point controlled by one, one way switch 6 Amp complete all as specified and directed.

,---ditto--- all as per item No. 2 above but for one bell point controlled by one bell push complete all as specified and directed.

,---ditto--- all as per item No. 2 above but for one ceiling / exhaust fan point controlled by one, one way switch 6 Amp complete all as specified and directed.

,---ditto--- all as per item No. 2 above but for one 3 pin 5 Amp socket outlet controlled by one switch on indepdendent board complete all as specified and directed.

,---ditto--- all as per item No. 2 above but for one 3 pin 5 Amp socket outlet controlled by one switch on same board complete all as specified and directed.

,---ditto--- all as per item No. 2 above but wiring with 2.5 sqmm PVC insulated multistranded copper conductor suitable for one 3 pin 16 Amp socket outlet controlled by one switch on independent board complete all as specified and directed.

S&F modular switch one way 6 Amps, 240 volts, 1 module complete all as specified and directed.

S&F modular socket 6 Amps, 2/3 pin combined 2 module AC 230 volts complete all as specified and directed.

S&F modular socket 6/16 Amps, 2/3pin combined 2 module AC 230 volts complete all as specified and directed.

S&F ceiling rose 3 plates polycarbonate isoated body complete all as specified and directed.

S&F modular switch 1 way 16 Amps, 230 volts, 1 module complete all as specified and directed.

S&F modular bell push, 6 Amp, 1 module 240 volts complete all as specified and directed.

S&F door bell, ding dong, AC 240 volts, single pole complete all as specified and directed.

S&F in replacement modular switch one way 6 Amps, 240 volts, 1 module complete all as specified and directed.

S&F in replacement modular socket outlet 6 Amps, 2/3 pin combined 2 module AC 230 volts complete all as specified and directed.

S&F in replacement modular socket outlet, 6/16 Amps, 2/3pin combined 2 module AC 230 volts complete all as specified and directed.

S&F in replacement ceiling rose 3 plates polycarbonate isoated body complete all as specified and directed.

S&F in replacement modular switch 1 way 16 Amps, 230 volts, 1 module complete all as specified and directed.

S&F in replacement modular bell push, 6 Amp, 1 module 240 volts complete all as specified and directed.

S&F in replacement door bell, ding dong, AC 240 volts, single pole complete all as specified and directed.

S&F in repair Modular metal flush box (sunken box), 12 module, concealed in wall incl taking down cover plate with frame, switch, socket and refixing the same after replacement of flush box including making good the disturbed surface as per existing complete all as specified and directed.

,---ditto--- all as per srl item No. 22 above but flush box 8 module complete all as specified and directed.

,---ditto--- all as per srl item No. 22 above but flush box 6 module complete all as specified and directed.

,---ditto--- all as per srl item No. 22 above but flush box 4 module complete all as specified and directed.

,---ditto--- all as per srl item No. 22 above but flush box 3 module complete all as specified and directed.

,---ditto--- all as per srl item No. 22 above but flush box 2 module complete all as specified and directed.

S & F modular blanking plate 1 module complete all as specified and directed.

S&F in replacement modular step type fan regulator 120 watts, 2 module AC 230 Volts as per existing make and size complete all as specified and directed.

M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 1.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including concelled rigid non matalic PVC conduit medium grade size not less then 20mm dia ISI marked with all conduit fittings/fixing accessories and unwelded sunken galvnised pressed steel terminal boxes of thickness not less than 1.0 mm covered with and including 3mm thick phenolic laminated white sheet cover for mounting switches, sockets, fan regulators etc for one light point controlled by one switch incl making good the disturbed portion complete all as specified and directed.

,---ditto--- all as per item No. 30 above but for one ceiling / exhaust fan point controlled by one switch complete all as specified and directed.

,---ditto--- all as per item No. 30 above but for one 3 pin 5 Amp socket outlet controlled by one switch on same board with other switches complete all as specified and directed.

,---ditto--- all as per item No. 30 above but for one 3 pin 5 Amp socket outlet controlled by one switch on independent board with other switches complete all as specified and directed.

,---ditto--- all as per item No. 30 above but for one bell point controlled by one bell push complete all as specified and directed.

M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 2.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 2.5 sqmm (Green) drawn into and including concelled rigid non matalic PVC conduit medium grade size not less then 20mm dia ISI marked with all conduit fittings/fixing accessories and unwelded sunken galvnised pressed steel terminal boxes of thickness not less than 1.0 mm covered with and including 3mm thick phenolic laminated white sheet cover for mounting switches, sockets, fan regulators etc for one 3 pin, 16 Amps socket outlet point controlled by one swith on independent board incl making good the disturbed portion complete all as specified and directed.

S&F LED batten (1.2M) made of CRCA sheet housing with a PC glossy diffuser duly prewired connection having a nominal system lumen output of 2000 lumens at a minimum system efficiency of 115 lumen per watt and total power consumption not more than 18/20 watt including driver. It has a rated system life time of 40000 burning hours at L70 and should have a colour temperature of 6500K, CRI>80, THD<10% and PF>0.95 complete all as specified and directed. Make: CG: CCS-103-20-40-SL-DP-NWH/ Philips/Surya /Havells.

S&F switch piano flush button single pole one way 6 Amp complete all as specified and directed.

S&F switch piano flush button single pole one way 16 Amp complete complete all as specified and directed.

S&F socket outlet, 2-in-1, 5 pin 6 & 16 Amps combined flush type compete complete all as specified and directed.

S&F socket outlet, 2-in-1, 5/6 pin 5/6 Amps flush type compete complete all as specified and directed.

S&F bell push, flush type 5/6 Amp complete all as specified and directed.

S&F in repair switch piano, flush type, single pole, one way 16 Amp complete all as specified and directed.

S&F in repair socket outlet, 2-in-1, 5 pin 6 & 16 Amps combined flush type compete complete all as specified and directed.

S&F in repair socket outlet, 2-in-1, 5 pin 6 Amps flush type compete complete all as specified and directed.

S&F in repair hum free electronic step fan regulator 120-280 volts of 100 watts capacity (socket type) including connecting up complete all as specified and directed.

M&L for sub main wiring with two run of 6 Sqmm single core, PVC insulated, unseathed, FRLSH multistranded copper conductor cable alongwith one run of 6.0 Sqmm earth wire as earth continuity conductor (Phase-Red, Neutral-Black, Earth-Green) drawing into and including PVC casing / capping of suitable size with all fitting and accessories on wall, ceiling etc including making connection as required and taking down old U/S wiring complete all as specified and directed. NOTE - Two run of 6 sq.mm phase and neutral wire & One run of 6 sq.mm earth wire & One run of PVC casing /capping with accessories shall be measured as One length.

,---ditto-- all as per item No. 46 above but two run of 10 Sqmm and one run of 10 Sqmm earth in 25mm dia PVC conduit complete all as specified and directed.

S&F MCBs of 'B' curve single pole 6 to 32 Amps having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs complete all as specified and directed.

S&F MCBs of 'C' curve single pole and neutral 40 Amps having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs complete all as specified and directed.

S&F MCBs of 'C' curve tripple pole and neutral 40 to 100Amps having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs complete all as specified and directed.

S&F in repair MCBs Distribution board SPN, 8 ways, powder coated, CRCA steel sheet, degree of protection IP-43, IK-09 with reversible double door, 240V, recess mounted having insulated 200 amp tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, blanking plate in unused spaces as required, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs complete all as specified and directed. Note : MCCB, MCBs and MCB DB shall be of the same make.

S&F in repair MCBs Distribution board SPN, 12 ways, powder coated, CRCA steel sheet, degree of protection IP-43, IK-09 with reversible double door, 240V, recess mounted having insulated 200 amp tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, blanking plate in unused spaces as required, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs complete all as specified and directed. Note : MCCB, MCBs and MCB DB shall be of the same make.

S&F in repair MCBs vertical Distribution board (VTPN), 4 ways, powder coated, CRCA steel sheet, degree of protection IP-43, IK-09 with reversible double door, 240V, recess mounted having insulated 300 amp tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, blanking plate in unused spaces as required, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs including one No. MCCB 4 pole 100 amp 16 KA complete all as specified and directed. Note : MCCB, MCBs and MCB DB shall be of the same make.

S&F in replacement of 18 watt Proxima-R, a high performance low-height back lit down liter suited for any any modern professional workspace in robust PDC alluminium housing ensures long life white/Warm white/Natural white all as specified and directed by Engr-in-Charge.

S&F in repair LED batten (1.2M) made of CRCA sheet housing with a PC glossy diffuser duly prewired connection having a nominal system lumen output of 2000 lumens at a minimum system efficiency of 115 lumen per watt and total power consumption not more than 18/20 watt including driver. It has a rated system life time of 40000 burning hours at L70 and should have a colour temperature of 6500K, CRI>80, THD<10% and PF>0.95 complete all as specified and directed. Make: CG: CCS-103-20-40-SL-DP-NWH/ Philips/Surya /Havells.

S&F in replacement building security light fitting new generation energy saving & environmental friendly long life versatile pressure die cast aliminium IP-66 high power LED light 35 watt complete with fixing arrangement incl light fitting bracket, 1.5m long made out of 32mm dia medium grade GI pipe with and incl 02 Nos MS clamp made of MS flat iron of 50 X 6mm size with nut, bolt, washer etc with and incl two coats of aluminium paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-charge

S&F in replacement Globe shaped post top lantern in frosted finish made up of Polycarbonate, long life aesthetically designed with systematic light distribution with IP 65 with 40 Watt LED Bulb and 5700 K lumen complete all as specified and directed.

S&F in replacement of Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendent/Angle type includign taking down Complete all as specified and directed by Engr-in-charge.

Supply and Fixing in replacement of PVC Casing Capping of size 20x12 mm of heavy grade including with all fittings required at site (3 mtr length) Complete all as specified and directed by Engr-in-charge. Note : 3m long PVC casing capping with all accessories measured as one

Supply and fixing in repairs energy efficient recessed mounted LED luminaire suitable for 2'x2' grid ceiling with fullglow fully diffused diffuser and lumen output of 3600 lumens having constant current electronic driver of 36 watt duly connected with 0.5 sqmm white colour PVC insulated & sheathed three core flexible multi stranded copper conductor cable as required complete all as specified and directed.

S&F in repair LED bulk head light fitting 9/10 watt IP 66 & IK 09 with pressure die cast aluminium housing & polycarbonate diffuser with LED driver duly prewired connection with 0.75sqmm PVC insulated & sheathed three core flexible multi stranded copper conductor cable complete all as specified & directed.

M & L earthing complete with GI earth plate Electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth plate not less than 2.25 Metre, deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level connected to galvanished earth lead wire 4.0 mm dia by means of bolts, nuts check and washers of G I or steel all as shown in electrical plate No. 3 of SSR Pt -I connected to earthing test point all as specified or indicated including GI pipe 15 mm dia light grade for earth wire protection, necessary excavation, earth work in any type of soil, PCC chamber and RCC cover slab, connecting lead wire from test point to DB complete all as specified & as directed.

Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ

SHREE BHAGWATI ENTERPRISES (BID ID -3233812)

Gaurav & company (BID ID -3228398)

M/S Sheeba Enterprises (BID ID -3230276)

Alliance Trading Corporation (BID ID -3229265)

Dev Enterprises (BID ID -3228770)