Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹55.8 LAccepted-Finance | L1 | Accepted-Finance Admitted | |
| 2 | L2₹56.4 L+₹62,456.64 (1.12%)Accepted-Finance | L2 | Accepted-Finance Admitted |
Tender Value
₹57.2 L
EMD Value
₹58,000
Closing Date
28 Jul 2020, 3:00 pmClosed
Project Director
DRDA Krishnagiri
Krishnagiri DT JJM 2020-21 Kaveripattinam Block 3 works Package No TN-04-KRI-169
2020_RDTN_172686_1
Roc_No_3439_2020_R4_03_07_20
Open Tender
Civil Works - Water Works
Item Rate
180 days
DRDA Krishnagiri
Please refer Tender documents.
4 documents required · 4 mandatory
₹0
₹58,000
DRDA Krishnagiri
30 Jul 2020
22 Jul 2020
28 Jul 2020
22 Jul 2020
28 Jul 2020
22 Jul 2020
24 Jul 2020
Amount
1.Providing FHTC to Ramapuram village Rs.11.60 Lakhs
Distribution system
Supply,delivery, laying and jointing of 63mm OD PVC 4Ksc pipe inlcuding earth work excavation in all strata soil, refilling and hydraulic testing, adopting standard specification and as directed by TWAD Board Officer.
Supply of PVC specials as per BIS 10124/1988 Part 1 to 13 &BIS 7834/1975 with ISI Marks to site of works
63mm PVC Bend page 12 ,sl.no-3
63mm X 50mm PVC Threaded coupler page 10 SOR
63mm x50 mm PVC Tee IS 7834/1987 page 10
63mm End cap page 12 sl.no 11
Supply and delivery of GI pipes medium class as per IS.1239/part I/ 1990 to site of work with ISI Marking
a.50mm GI pipe-page 25 sl.no 6
Supply and delivery of GI specials to site of work as per IS specification with ISI marking
a. 50mm GI coupling
a.50mm GI Elbow page 25 sl.no 1
a.50mm GM Gate Valve
Laying and Jointing of 50mm GI pipes with specials including all labour charges etc complete.
Provision For FHTC's ( 8 Meter Length per FHTC)
Provision For FHTC's ( 8 Meter Length per FHTC,GM Ferrule, 20mm GI Pipe, 20mm GI Elbow,20mm GI Coupling, 20mm GI Union, Pipe Nipple, Saddle, GI Tapset including labour charges etc.,complete.
Construction of Road for Restoring the Cut Portion
Construction of Granular Sub base by providing well graded material (25 mm to 4.75 mm IRC HBG metal @ 65 %,4.75 to 2.36mm IRC HBG metal @20%&2.36 mm below IRC HBG metal @15%)& (the material passing 425 microns sieve shall have liquid limit and plasticity index not more than 25 & 6% repectively) spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with rotovator at OMC and compacting with three wheel 80-100 KN capacity and finished in accordance with the requirements of the specification and thickness as per approved plans or as directed by the Engineer (Mix -in - place method) .GRIII
Cement concrete 1:4:8 mix using 20mm ISS metal including cost and all cost and conveyance of materials and all labour charges etc comp
Cement concrete 1:2:4 mix using 20mm ISS HBG metal including cost and conveyance and all other labour charges etc complete.
Provision for Name board
2.Providing FHTC to Periyakaradiyur village Rs.27.95 Lakhs
Provision for Sump 30000Lts Capacity
Earthwork excavation above water level in light (or) sandy (or) clay soils for infiltration well of 4.30m dia (internal) including leveling the site and as directed by the departmental officers open well excavation for infiltration well for first depth of 1.00 m
First depth of 2m
Second depth of 2m
Sand filling for foundation with clear river sand including cost of sand, watering, ramming and consolidation etc., complete as directed by TWAD Board officers.
Cement Concrete 1:4:8 (One cement, four sand and eight aggregates) using 40mm HBGS for leveling course for foundation including the cost of mixing concrete, ramming curing etc. complete as directed by TWAD Board officers.
beyand1.50m below GL
upto 1.50m Below GL
upto 4.50m above GL
Supplying and erecting steel centering for sides and soffits including necessary supports and shuttering to the required height for RCC items using MS sheets of suitable size of BG 10 stiffened with welded MS angles of size 25mm x 25mm x 3mm of boarding, laid over silver oak joints of size 10cm x 6.5cm spaced at 90cm center to center and supported by casuarina props of 10cm 13cm dia spaced at 75cm center to center complying with standard specifications etc., completd and as directed by TWAD Board officers.
For 0.00 to 3.30m Plane Surface
For 0.00 to 3.30m Cured Surface
Supply, delivery, fabrication and placing in position of RTS rods for reinforcement for binding ring, pilasters, roof slab and well curb including cost of upto 16mm above `16mm RTS binding wire and as directed by TWAD Board Officers
Providing ventilating arrangements by fixing in position 160mm OD PVC 6 Ksc pipes with PVC cowl and as directed by TWAD Board Officers.
Providing Manhole cover in the roof slab of existing infiltration well.
Providing and fixing of RCC inner access ladder in RCC 1:1.5:3 using 20mm HBG stone for OHT including cost of reinforcement, placing grill in position, centering shuttering charges, mixing concrete curing etc., complete as directed by the TWAD officer.
Cement paint (New wall )Two Coats with approved cement Paint over one prime coat of Cement primer over Plastered surface including cost and conveyance of materials and labour charges etc complete. - 10.00 Sqm.
Fabrication, supply, delivery and fixing of outside MS ladder of 45 cm wide made out of 50x 50 x 6 mm MS angle for sides and steps in 16mm dia MS rod at 30cm centre to centre welded, Jointed etc., providing with suitable side supports, clamps and locking (TWAD SOR for 7.5m stagging)
Refilling the foundation with excevated earth including consuldration also by the departmental officer complete
Painting TWAD emblem on the sump as directed by
supply and delivery of 10HP Submersible pumpset (75lpm x 275m) suitable for 150mm dia bore well as per 8034/2002
Supply and delivery of 10Hp Pannel board
Supply and delivery of pipes,cables and specials etc completed
50mm GI Pipe
50mm coupling
4sqm cable
50mm NRV
50mm Bend
50mm flange set
50mm Hex nipple
MS Clampset
Supply and Delivery of Following Water Supply materials etc complete
100Amp fuse carrier
2X1 1/2 wooden board
3.5 core of 25sqmm Pvc UG Cable
Supply and delivery of MS Kiosk of size 0.75m x 0.45m x 0.75m made up of MS angle of size 50mm x 50mmx 4mm alround covered with 16 gauge MS sheet and kiosk door made up of MS plates of size 25 mm x 3 mm including cutting, welding, grinding, locking arrangements
Distribution system
Supply,delivery, laying and jointing of 63mm OD PVC 4Ksc pipe inlcuding earth work excavation in all strata soil, refilling and hydraulic testing, adopting standard specification and as directed by TWAD Board Officer.
Supply of PVC specials as per BIS 10124/1988 Part 1 to 13 &BIS 7834/1975 with ISI Marks to site of works
63mm PVC Bend page 12 ,sl.no-3
63mm X 50mm PVC Threaded coupler page 10 SOR
63mm x50 mm PVC Tee IS 7834/1987 page 10
63mm End cap page 12 sl.no 11
Supply and delivery of GI pipes medium class as per IS.1239/part I/ 1990 to site of work with ISI Marking
a.50mm GI pipe-page 25 sl.no 6
Supply and delivery of GI specials to site of work as per IS specification with ISI marking
a. 50mm GI coupling
a.50mm GI Elbow page 25 sl.no 1
a.50mm GM Gate Valve
Laying and Jointing of 50mm GI pipes with specials including all labour charges etc complete.
Provision For FHTC's ( 8 Meter Length per FHTC)
Provision For FHTC's ( 8 Meter Length per FHTC,GM Ferrule, 20mm GI Pipe, 20mm GI Elbow,20mm GI Coupling, 20mm GI Union, Pipe Nipple, Saddle, GI Tapset including labour charges etc.,complete.
Construction of Road for Restoring the Cut Portion
Construction of Granular Sub base by providing well graded material (25 mm to 4.75 mm IRC HBG metal @ 65 %,4.75 to 2.36mm IRC HBG metal @20%&2.36 mm below IRC HBG metal @15%)& (the material passing 425 microns sieve shall have liquid limit and plasticity index not more than 25 & 6% repectively) spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with rotovator at OMC and compacting with three wheel 80-100 KN capacity and finished in accordance with the requirements of the specification and thickness as per approved plans or as directed by the Engineer (Mix -in - place method) .GRIII
Cement concrete 1:4:8 mix using 20mm ISS metal including cost and all cost and conveyance of materials and all labour charges etc comp
Cement concrete 1:2:4 mix using 20mm ISS HBG metal including cost and conveyance and all other labour charges etc complete.
Provision for Name board
3. Providing FHTC to Buttanur village Rs.17.69 Lakhs
Distribution system
Supply,delivery, laying and jointing of 63mm OD PVC 4Ksc pipe inlcuding earth work excavation in all strata soil, refilling and hydraulic testing, adopting standard specification and as directed by TWAD Board Officer.
Supply of PVC specials as per BIS 10124/1988 Part 1 to 13 &BIS 7834/1975 with ISI Marks to site of works
63mm x50 mm PVC Tee IS 7834/1987 page 10
63mm End cap page 12 sl.no 11
Supply and delivery of GI pipes medium class as per IS.1239/part I/ 1990 to site of work with ISI Marking
a.50mm GI pipe-page 25 sl.no 6
Supply and delivery of GI specials to site of work as per IS specification with ISI marking
a. 50mm GI coupling
a.50mm GI Elbow page 25 sl.no 1
Laying and Jointing of 50mm GI pipes with specials including all labour charges etc complete.
Provision For FHTC's ( 8 Meter Length per FHTC)
Provision For FHTC's ( 8 Meter Length per FHTC,GM Ferrule, 20mm GI Pipe, 20mm GI Elbow,20mm GI Coupling, 20mm GI Union, Pipe Nipple, Saddle, GI Tapset including labour charges etc.,complete.
Provision for Name board
GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}
SPS CONSTRUCTION
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .