PROVN OF CONFERENCE HALL AT STN HQ BHARATPUR UNDER GE BHARATPUR

Amount

M&L for surface dressing n. exc.15 cm deep in soft/loose soil complete all as specified and directed.

M&L for surface excavation n.exc. (Not exceedings) 30 cm deep and averaging 15 cm deep and getting out in soft / loose soil complete all as specified and directed.

Excavation in trenches, not exceeding 1.50 meter wide and not exceeding 1.50 meter in depth, for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 square meter on plan and not exceeding 1.50 meter in depth and getting out in soft/ loose soil complete all as specified and directed. Note :- Dewatering & timering / shoring to excavation if reqd shall be arranged by contractor during construction. The rate quouted by contractor shall deemed to be inclusive of the same & nothing extra shall be paid against this.

Returning filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm in soft/ loose soil complete all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting complete all as specified and directed.

Material and labour for Cement concrete in foundations, filling and mass concrete type D2 1:4:8 using 40 mm graded stone aggregate including compaction of concrete, curing etc. complete all as specified and directed.

M&L for RCC M-25 in foundation, including rafts, footings, foundation beams, plinth beams, bases for columns etc; basement slabs, under reamed piles and mass concrete complete all as specified and directed.

M&L for Reinforced cement concrete (design mix M-25) in columns, pillars, piers, posts and struts complete all as specified and directed.

M&L Reinforced cement concrete (Design Mix, M-25) in beams, cantilevers, bressummers, lintels over 1.50 meter span complete all as specified and directed.

M&L for Reinforced cement concrete (Design Mix, M-25) in chajja complete all as specified and directed.

M&L for RCC M-25 for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

S&F mild steel TMT bars 6 mm to 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

All as per item No. 13 but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders

Form work to sides of concrete foundations, foottings, bases of columns, raft and raft beams, sides and soffits of foundation and plinth beams and similar works; vertical or to batter for rough finished surfaces complete all as specified and directed.

Form work to sides of pillers, posts, struts, piers, columns and stanchions for rough finished surfaces complete all as specified and directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and directed.

Formwork to chullah hoods, chajjas, troughs and similar items including edges complete all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

M&L Brick work with old size sub class 'B' bricks, straight or curved on plan exceeding 6 meter mean radius built in cement sand mortar 1:6 including curing, racking of joints etc. complete all as specified and directed.

M&L for brick work with sub class ‘B’bricks,using old size bricks straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed.

M&L Damp proof course in Cement concrete type B-0 1 :2:4 40mm thick to horizontal or vertical :surfaces including necessary formwork Applying evenly a coat blown type bitumen at the rate of 1.50 kg per square metre and blinding with clean dry sand @ 0.05 cu. m. per sq. m, Polythene film, 50 micron thick, laid on a coat of bitumen primer, @ 0.30 to 0.50 kg per sq. m complete all as specified and directed.

M&L for Rendering 15 mm thick in CM (1:4) on stone masonry surfaces or surface other than fair face of brick-work or on one side of lathing complete all as specified & as directed.

M&L for rendering 5 mm thick cement sand mortar 1:4 using water proofing compound @ 3%, over 10 mm thick rendering in cement sand mortar 1:6 as in plaster to external surfaces of walls finished even & smooth without using extra cement complete all as specified and directed.

Supply only Integral waterproofing compound complete all as specified and directed.

M&L for Rendering 5 mm thick in cement and sand mortar 1:3 on fair faces of cement concrete surfaces of ceiling of chajjas/roof protection etc including finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 with integral water proofing compound @ 3% of cement finished even and smooth without using extra cement complete all as specified and directed.

Material and labour for preperation of surfaces and applying three coats of white wash to ceilling complete all as specified and directed.

M & L Preparation of new decorated plastered unplastered surfaces surface of wall including cornices, pilasters etc by brooming down and applying two coats of distemper oil emulsion white or tinted over 3 mm thick wall care putty on Wall Surface using with alkaliresistant priming paint complete all as specified and directed.

Material and labour for preperation of surfaces and applying two coats of apex weather proof over a coat of primer to walls (External) complete all as specified and directed.

M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match , over 10 mm thick screed bed in CM 1:4 in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed.

M&L for Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10 mm thick backing in CM 1:4 inskirting/dado etc, set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed.

M&L for Vitrified Light Shade ceramic tiles 10 mm thick (Square/rectangular) area of each tile not exceeding 0.36 sqm , over 10 mm thick screed bed in CM 1:4 in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed.

M&L for 75 mm thick PCC type D-2 1:4:8 using 40 mm graded stone aggregate as in sub base under floor over rammed earth complete all as specified and directed.

M & L for PCC 30mm thick 1:2:4 Type B-0 as in sub base of floor complete all as specified and directed.

Material and labour 50mm thick PCC type C-2 1:3:6 as in plinth protection complete all as specified and directed.

M&L Cement Concrete Type D-2, 1:4:8 40mm graded aggregate 100mm Thick complete all as specified and directed.

M&L for 60mm thick & M-35 factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould/rubber molded, laid in required colour & pattern over 25mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. Note:- cushion shall be measured & paid in seprate item)

M&L factory made precast PCC solid block (1:2:4) type B-1 using 20mm graded stone aggregate as in kerb stone of size 300mmx300mmx150mm setting in cm (1:4) etc complete all as specified and directed.

supply only Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

Material and labour for treating the top surface of filled earth at the rate of 5 liters of emulsion per square meter of surface complete all as specified and directed.

M&L for ATT Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed.

M&L for ATT along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and directed.

M&L for Hardcore of gauge n exc. 63 mm, broken stone or boulders ,deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L fo Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L for screed bed or bedding layer 15 mm thick in cement mortar 1:4 mixed with water proofing compound as per manufactoring instruction, finished even and smooth without using extra cement @3 % WPC Shall be meashured and paid seperatly complete all as specified and directed.

M&L Providing and applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm. One coat of self-priming of elastomeric waterproofing liquid (dilution with water in the rati of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application/system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete all as specified and directed.

M&L for providing precast cement concrete 1:2:4 type B1 20 mm graded aggregate as in landings, cover slabs (for manholes etc) chullah hoods, chajjas, water troughs, mangers, shelves, and similar articals with plain faces including chamfers, weatherings, throatings etc and set in cement mortar 1:4 complete with joints to match complete all as specified and directed.

M&L for 150 mm bore reinforced cement concrete pipe , class NP-3 laid & jointed complete with collars in cm(1:1) with spun yarn & tested . Coomplete all as specified & directed.

M&L for Plain cement concrete 1:4:8 type D2 (Using 40mm graded crushed stone aggregates) as in bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested for 150mm bore complete all as specified and directed.

Construction of Septic Tank Including inlet & outlet chambers For 50 Users brick constructions (with top of slab at GL) including necessary excavation & earth work in any type soil & disposal of surplus soil to a distance n.exc 50m ,brick work in sub class 'B' bricks bulit in CM (1:4) ,RCC as marked conforming to IS -12592 with angle iron frame 100mm bore cast vent pipes with cast iron cowls complete all as specified & shown as per drawing, Drg No. CEJZ/ 2002/TD/S-2 (1/1,1/2)

M&L for PCC in surface channals and drain 1:2:4 type -B1 complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped end etc. complete all as specified and directed.

M/L Providing cement concrete in copings, kneelers, appex 1:2:4 type B-1( 20 mm graded aggregates)stones, bed plates complete all as specified and directed.

S & F powder coted Anodised Aluminium frame for door,windows, vantilators with one or more rebates including joining cleats for fixing etc complete all as specified and directed.

S & F powder coated Aluminium door shutter,aluminium section weighing 0.55kg/m including necessary joining cleats glazing clips,rubber neoprene packing handles 2 Nos in each door, hinges anodized aluminium snap beading screw etc complete all as specified and directed.

S&F powder coated Anodised aluminium window and ventilators shutters,side hung type without sash bars,aluminium section weighting 0.55 kg/m including necessary joining cleats,glazing clips,rubber packng,anodised aluminium snap beading,screws,anodised aluminium fitting such as peg stays 150mm long 1 nos ,hinges type B-21 100 mm long 2 Nos suitable handle 1 Nos complete all as specified and directed.

S&F three track three panels powdre coated sliding window with fly proof SS wire meash (02 Nos glazed & 01 No wire mesh panels) made of frame 92x44mm & sash 32x60 mm both having wall thickness 1.9+ 0.2mm and single glazing bead of appropriate dimension (area of window upto 1.75sqm), including aluminium extruded interlock, EPDM rubber gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), GI fasteners 100x8 mm size for fixing frame to finished wall and necessary stainless steel screw etc. proflie of frame and sash shall be mitred cut and fusion welded at att corners, including drilling of holes for fixing hardware's after fixing frame the gap between frame and adjustment finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed.

S&F Aluminium extruded section body door closer hydranlicelly regulated designation no 3 universal type suitable for door shutter up to 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

S&F aluminium anodised grill DG-202/MG-107 of Deco Grill fixed with required section including all fixtures of approved make complete all as specified and directed. Note : (i) Make shall be of M/S Decogrill of M/S associated or equivalent as approved by GE. (ii) Min Thickness of anodized shall be 15 Microns

S&F Sheet glass 5.50mm thick ordinary quality and glazing with oil putty in square n.exc 0.50 sqm in each pane complete all as specified and directed.

S & F Figured glass,3mm thick pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed.

M&L for providing and fixing 4mm thick Aluminium Composite Panel (ACP) Sheet for partion,door of approved make,color & shade.Joint of sheet to be finished with selecon based sealent also including all fittings & fixtures complete all as specified and directed.

S&F Stainless Steel curtain rod 25mm dia fixed with and including fancy type matching pair of brackets and pair of End Cap of Stainless Steel fixed with SS screw complete all as specified and ditected.

S&F for sollid PVC door frame of size 50mmx47mm made out of 5mm plain colour pvc sheeet reinforced with m.s. squre tube complete all as specified and directed.

Supplying & fixing in the frames at site factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement all as specified and shown on serial pages No. 142, 143, 144 , 145 & 146 of SSR 2020 (Part-II) and complete all as specified and directed. Doors shall be of make :- Rajshri Plastiwood / Sintex /Rotomould / Rotomatic..

S&F extruded aluminium alloy handle 150mm size fabricated type anodised, ISI marked complete all as specified and directed.

S&F Aluminium anodised barrel tower bolt 150mm long of extruded section and fixed complete all as specified and directed.

S&F 75 mm butt hinges medium weight cold rolled mild steel, ISI marked, fixed to angle iron chowkats including welding complete all as specified and directed.

Supply, jointing & tersting steel water tubing, medium grade galvanised with and including necessary pipe fittings/accessories like sockets, unions tees, elbows ,cutting chases etc and fixed to or concealed in walls and ceiling or laid in floors, complete of following sizes:- (a) 15mm bore

(b) 20mm bore

S & F 15mm bore bib taps, fancy type cast copper alloy chormium plated with crutch or butterfly handle, screwed down screwad for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S & F 15mm bore, stop valve cast copper alloy fancy type, chromium plated with long shank and cup (concealed type) screwed down high pressure with crutch or butterfly handle screwed both ends (external threaded) for iron pipe or for unions and fixed complete all as specified and directed.

S &F Rotational moulded polyethylene water storage tanks 500 Ltr (cylinderical vertical with closed top)with ball brass valves,high pressure 20mm , with polythene float and flynut complete, hoisted and fixed in position all as specified in SSR part - I complete all as specified and directed.

S&F for Single piece-WC with UF Soft Close Slim Seat Cover, Fixing Accessories, fccessories set and Dual flush Cistern incl. all Fittings, Size: 370x670x720 mm, S Trap-300mm complete all as specified and directed. (Make;- Jaquar Registered design LYS-WHT-38851S300UFSMN or eqv in Perryware , Hindware )

S & F 20mm bore,Gun metal gate valve painted, finish with forged brass spindle and iron wheel head, screwed both ends internally IS:778 class 2 for iron pipe or for unions and fixed complete all as specified and directed.

S & F PVC connections 15mm size with PTMT nuts of lenght 450mm complete all as specified and directed.

S&F wall mixer of bathroom 3 in 1 system with provision for both hand & over head shower ,with 115 mm long bend pipe ,connecting legs & wall flage complete all as specified and directed. Make:- Cat Part No.FUS -29281 jaquar ,parryware etc

S & F 15mm bore angle Cock chromimum plated complete all as specified and directed.

S&F in viterous china Table Top Basin with CP waste coupling, Size: 565x425x140mm complete all as specified and directed. (Make;- Jaquar Registered design KUS-WHT-35935 or eqv in Perryware , Hindware )

S&F for in Brass Chromium plated central hole basin mixer without popup waste system with with 450 mm long braided hoses complete all as specified and directed. (Make;- Jaquar cat part no QQP-7167BPM 10101 or eqv in Perryware , Hindware )

S&F Vitreous China Urinal half stall type , Make Jaqour Model No URS-WHT-38851S 220UF white with grating and union for discharge pipe incl providing & fixing plugs ,bedding urinal against wall in CM 1:2, securinal urinal to plugs with & incl 60mm long brass complete all as specified and directed.

S&F Brass Chromium plated Bib Cock with Wall Flange complete all as specified and directed. (Make;- Jaquar cat part no DRC-37037 or eqv in Perryware , Hindware )

S&F waste fitting brass chromium plated for 32mm bore with long screwed shanks and fly nuts including 32mm PVC waste pipe for WHB complete all as specified and directed.

S&F MS chromium plated grating 125mm dia of weight not less than 50gm for floor trap / Nahani trap complete all as specified and directed.

S&F for Maze Overhead Shower 300x300mm Square Shape Single Flow (Body & Face Plate Stainless Steel with Chrome Finish) with Rubit Cleaning System complete all as specified and directed. Make;- Jaquar Registered design no.276017 or eqv in Perryware , Hindware )

S&F aluminium anodised tubular towel rail, 20mm dia, 'D' type, 60cm long between flanges complete all as specified and directed.

M&L cast iron nahani trap of 75mm bore, complete all as specified and directed.

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, ISI marked of 75mm bore complete all as specified and directed.

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls, ISI marked of 110mm bore complete all as specified and directed.

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls, Type 'B', ISI marked of 75mm bore complete all as specified and directed.

S & F 110mm PVC (SWR) bend complete all as specified and directed.

S & F 110mm PVC (SWR) junction single, (SingleT) equal or unequal with access door complete all as specified and directed.

S & F stainless steel handle of 110mm size of best quality as per approved sample complete all as specified and directed.

S & F magnet catch for kitchen cabinet shutter as per approved sample complete all as specified and directed.

S & F colour powder coated mild steel continuous (piano) hinge, width of flaps (when open) is 30mm complete all as specified and directed.

S & F 75mm PVC (SWR) bend with access door complete all as specified and directed.

S & F 75mm PVC (SWR) bend complete all as specified and directed.

S & F 110mm PVC (SWR) vent cowl complete all as specified and directed.

S&F Hand Shower (Health Faucet) (ABS Body) with 8mm Dia, 1.2 Meter Long Spirochrome flex tube & Wall Hook complete all as specified and directed. (Make;- Jaquar cat part no ALD-587, or eqv in Perryware , Hindware )

S&F Grab bar 600mm Long, Stainless Steel complete all as specified & as directed. (Make;- Jaquar cat part noACN-1101S or eqv in Perryware , Hindware )

S&F Towel Ring Square with Round Flange complete all as specified & as directed. (Make;- Jaquar cat part noACN-1121N or eqv in Perryware , Hindware )

S&F Soap Dish Holder complete all as specified & as directed (Make;- Jaquar cat part noACN-1131N or eqv in Perryware , Hindware )

S&F For Toilet Roll Holder with Stainless Steel Flap complete all as specified & as directed. (Make;- Jaquar cat part noACN-1153S or eqv in Perryware , Hindware )

S&F Towel Rack 600mm Long with Lower Hangers, Stainless Steel complete all as specified & as directed. (Make;- Jaquar cat part no ACN-1181S or eqv in Perryware , Hindware )

S&F for Corner Glass Shelf (with Bracket Complete all as specified & as directed. (Make;- Jaquar cat part no ACN-1173 or eqv in Perryware , Hindware )

S & F PVC awning 0.5 to 1.00mm thick sheet single side coated fixed over 1.5"X1.5" aluminium square pipe frames grouted to wall, columns and beams etc with 12mm dia fatenners and shape as per required complete all as specified and directed.

S&F sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F Venetian blinds (Decorative Blinds) for windows having any color & fixed to wall with suitable brackets and accessories complete all as specified and directed.

S &F 18mm thick solid PVC ply of first quality of one side prelaminated of approved colour and one side white colour fixed with screw 'solvent cement/adhesive to make cupboard shutter complete all as specified and directed. Make : Rajshree/Sintex or equivalent make approved

S &F 18mm thick solid PVC ply of first quality of both side white colour fixed with screw 'solvent cement/adhesive to make shelves, partitions and drawers etc for kitchen cabinet and cupboards complete all as specified and directed. Make : Rajshree/Sintex Rajshree/Sintex or equivalent make approved

Providing and fixing 20 mm thick gang saw cut, mirror polished, premoulded and prepolished,Granite of any colour and shade machine cut for kitchen platforms, vanity counters, window cills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. rubbing, cutting, moulding and polishing to edges to give high gloss finish etc. complete all as specified and directed.

Supply & install in replacement of inverter type split AC units indoor/outdoor complete insulated cooper tubing, ecofriendly refrigerent, cooper bound rotary compressor complete with cordless remote unit and dust filter for batter indoor air quality with mimimum 3 star BEE rating and of capacity 2.0 TR complete all as specified and directed. Make: Hitachi/LG/Llyod/Voltas or equivalent as approved

Supply and fix Voltage stablizer for automatic operation,single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stablized at 230 V with accuracy of +/- 2.5% and of capacity 5 KVA complete all as specified and directed.

S&F GI tubing medium grade ISI marked including all fittings laid in trenches / fixed on wall of size 40 mm bore complete all as specified and directed.

S&F GI tubing medium grade ISI marked including all fittings laid in trenches / fixed on wall of size 20 mm bore complete all as specified and directed.

M&L of gun metal gate or globe valves with iron wheel head (ISI Marked), screwed both ends for iron pipe and fixed of size 20 mm bore complete all as specified and directed.

M&L of MS clamp /saddle piece made out of MS flat iron suitable to make ferrule and clamping for branch connections complete with GI socket welded it on one FI strip suitably positioned at the centre of pipe including drilling as per site requirement complete with MS nuts, bolts, washers and rubber packing for complete of size 100/80 mm pipe complete all as specified and directed.

M&L for cable protection cover with sub Class`B` bricks old size laid dry, flat perpendicular across the cable in trenches complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 3½ core 70 Sqmm complete all as specified and directed.

M&L point wiring complete with 1.5 Sqmm 02 x single core multistranded copper conductor of 1100 volts grade PVC pre insulated FRLS and unsheathed cable enclosed in PVC conduit pipe with all PVC accessories such as Tee, bend, collar, elbow, square junction box etc fixed on the concealed surface of wall/ceiling by means of PVCsleevel/dash fastners with cadmium plated screws including suitable size of PVC boards/ existing sunken box for mounting fittings like switches, sockets, fan regulator etc including 1.5 Sqmm insulated but unsheathed copper earth continuity conductor to common earth and connedcted to earth dolly complete all as specified and directed for the following :- (a) One light point controlled by one way switch.

(b) One fan point controlled by one way switch.

(c) One bell/buzzer point controlled by one push button.

(d) One 3 pin 6 Amp socket point outlet on the same board with other switches

(e) One 3 pin 6 Amp socket point outlet on the independent board

All as per item No 4 above but with multi stranded copper conductor cable 2.5 Sqmm size for 3 pin 16 Amps socket point outlet on independent board including 2.5 Sqmm copper cable PVC insulated FRLS unsheathed copper continuous earth wire including connecting to common earth dolly complete all as specified and directed.

S&F ceiling rose surface bakelite 50 x 40 mm three terminal ISI marked including suitable size of PVC board complete all as specified and directed.

M&L bell multi musical type 230 volts grade complete all as specified and directed.

S&F modular Socket, 6A - 2/3 pin combined 2 module 230 volt complete all as specified and directed.

S&F modular Socket 6A/16A - 2/3 pin combined 2 module 230 volt complete all as specified and directed.

S&F modular switch 1 way 6 Amps 1module 230 volt grade complete all as specified and directed.

S&F modular switch 1 way 16 Amps 1module 230 volt grade complete all as specified and directed.

S&F modular bell push flush type 5 Amps 230 volts complete all as specified and directed.

S&F modular step type electronic fan regulator 2 module 120 watt complete all as specified and directed.

S & F white cover plate with frame, 2 module complete all as specified and directed.

S & F white cover plate with frame,6 module complete all as specified and directed.

S & F white cover plate with frame,8 module complete all as specified and directed.

S & F white cover plate with frame,3 module complete all as specified and directed.

S & F Metal flush box 2 module complete all as specified and directed.

S & F Metal flush box 8 module complete all as specified and directed.

S & F Metal flush box 3 module complete all as specified and directed.

S & F Metal flush box 6 module complete all as specified and directed.

Supply & fix 4 way VTPN Distribution Board (with provision for MCCB as incomer & WiNtrip MCB as outgoing) complete all as specified and directed.

Distribution board factory made and tested made of sheet metal enclosure powder coated suitable for mounting the MCB 240 volt of the following DBs :-. (a) 8 way SPN with 200 amps rated busbar 240 volts (double door type).

S&F MCCB, MCB with GI hardware fixed in DB's of the undermentioned type and rating :-

(a) MCCB 415 volts 100 Amps 04 pole 30 KA.

(b) MCB SP 240 volts 10-32 Amps

(c) MCB SPN 40 Amps, 240 volt

S&F Linear LED T8 tubular lamp of 20 watt with extruded aluminium body,PC diffuser and inbuilt driver including compact batten suitable for LED T8 lamps , complete with all accessories internally pre-wired and including connecting to ceiling rose with three core flexible copper conductor cable of size 1Sqmm complete all as specified and directed.

Earthing complete with Galvanised steel earth plate electrode 600 x 600 x 6 mm buried directly in the ground vertically to depth not less than 3 Mtr below the ground level with the top edge of earth plate, depth not less than 2.25 Mtr below the ground level connected to connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts and washers protected by GI tubing light grade 15 mm dia uptoTest point 20 mm dia watering pipe with funel & wire mesh, PCC pit in PCC 1:2:4 using 20 mm stone aggregates chamber 40 mm thick RCC cover slab (1:2:4) type B-1 using 20 mm graded stone aggregates complete all as specified and shown in electrical plate No.3 of SSR Part-I including earth work in any type of soil ,removal of surplus sil and providing charcol dust & salt layers all around the earth plate upto 15 cm complete all as specified and directed. ( Note:- Up to 7.5 Mtr length of pipe of 40 mm dia and GI strip shall be deemed to be included in unit rate quoted by tenderer GI pipe and GI strip beyond 7.5) will be measured separately under respective item.

S&L pipe galvanised medium class complete including fittings 40mm dia complete all as specified and directed.

Boring of holes under road, pavement, hard standing by trenchless technology using ultra sounding technique and necessary machine for laying under ground pipe up 100mm dia complete all as specified and directed. Note :- GI pipe shall be measured and paid in concern Item

S&F 25 watts LED street light fitings new generation energy saving, environmental friendly, long life, versatile pressure die cast aluminium IP66 with 10KV surge protection road way, luminaire with high power LED as light source with warranty option of 5 years and suitable drivers etc and connecting with 4.0 sq mm multistranded aluminium conductor PVC insulated twin core weather proof cable from fittings to over head lines or to the jucntion box and fixing to complete all as specified and directed.

Cutting chases,pinning in making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landing steps cills,sunshades,shelves lintel etc.and cutting chases for concealed water tubing or concealed conduit wiring etc,and making good cutting not exc 10 cm girth on stone concrete block or slab walls complete all as specified and directed.

S&F sheet metal enclosure of single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of SP 20 Amps, 240 volts complete all as specified and directed.

M&L submain wiring complete with 6 Sqmm single core multi standred PVC insulated and sheathed cable FRLS copper conductor two runs and one run of 6 Sqmm copper cable for earth continuity conductor in and including drawn through PVC conduit/sleeves with all PVC accessories fixed on wall, floor/ceiling etc. complete all as specified and directed.

M&L submain wiring complete with 4 Sqmm single core multi standred PVC insulated and sheathed cable FRLS copper conductor two runs and one run of 4 Sqmm copper cable for earth continuity conductor in and including drawn through PVC conduit/sleeves with all PVC accessories fixed on wall, floor/ceiling etc. complete all as specified and directed.

S & F street light GI bracket of 0.6 mtr long made out of 40mm dia light grade GI pipe bend to shape of 120 degree end welded at required including 02 Nos MS clamp of FL 40 x 6mm including nuts bolts & washers complete necessary fixing arrangements on pole complete all as specified and directed.

S&F exhaust fan of 300 mm sweep 900 rpm with suitable size of MS louvers duly painted , connecting wire PVC insulated twisted flexible 0.5 sqmm copper conductor including all standard accessories complete all as specified and directed. Make: Havells Model: Turbo Force SP,or equivalent in bajaj/cromption/polar etc

S&F ceiling fan (white) of 1200 mm sweep, 5 star rating copper wound with super energy efficient BLDC motor including remot,connecting wire PVC insulated twisted flexible 0.5 sqmm copper conductor canopy set, down rod, shackle kit, including all standard accessories complete all as specified and directed. Make:-Havells Model No- Efficiencia Neo or equivalent in cromption/ orient/Bajaj etc

M&L bracket light fitting wall mounting, champagne gold finish fixture with plastic body suitable for 14 W LED lamp B22 base. all as directed by Engr-in-charge. Cat No- LHFOECE1TZ10014 Make: Havells or equivelent in Cromption/ Bajaj etc complete all as specified and directed.

S&F LED mirror light fitting 1 x 9 W 230 volts attractive wall / ceiling mounted type with decorative grey end caps, polycarbonate body and ribbed opal diffuser.matallic channel and white refelector suitabale for mirrior fitting,complete with all accessoris prewired and including connecting up with twin core twisted flexible copper conductor cable 0.5 sqmm size complete all as specified and directed.

S&F LED Recessed full lit luminaire with glare free uniform illumination 2 ft x 2 ft, 36 Watt , complete with all accessories internally pre-wired and including connecting to ceiling rose with three core flexible copper conductor cable of size 1.5Sqmm . complete all as specified and directed.

S&F in repair modular sheet metal enclosure of single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of SP 20 Amps, 240 volt complete all as specified and directed.

M/S PREETI CONSTRUCTION (BID ID -3188972)

M/s S. K. Construction Co. (BID ID -3188738)