Kaithal PHED No. 1 WQMS 2021-22

Amount

1. Pre-programmed Uv-Visible Dual Beam Spectrophotometer for Water & Waste Water Analysis ( Make HACH, Thermo Scientific or WTW (Xylem) General Requirements "The Spectrophotometer will be dual beam (viz. UV-Visible) operation and with the reference cell position for kinetics application. It will mandatorily have an 8-cell carousel. The spectrophotometer must haveroom-light resistance, allowing lid-open operation for improved speed and convenience. The Spectrophotometer will have option of automated cell changers and cell holders, sipper, and fiber optic probes for measurements outside of the sample compartment. It must accommodate high throughput measurements and temperature control. The Spectrophotometer will have following features: i. Spectrophotometer will be Double Beam (UV-Visible)/Reference Cell ii. It is will have High resolution touchscreen user interface. The spectrophotometer must be capable of operating through computer also. iii. There will be 8-position cell changer with switchable turret iv. It will have onboard methods, reporting and data export v. It is capable of open-lid operation. vi. There will be room light resistance. vii. It will have sipper(optional) viii. It must have optional facility for 4-position cell changer (long path cells) and Peltier-thermostat single cell holder (20 °C - 60 °C) Specifications: Detector Type Dual Silicon Photodiodes Display 7-inch colour touchscreen, high definition, 800 × 1280 pixels Photometric Accuracy Instrument ±0.002A at 0.5A ±0.004A at 1.0A ±0.008A at 2.0A

Bacteriological incubator Make : NST, Ambassador, Optics Technology Specifications: Inner Size: 18" x 18" x 24", Rating Watts 750, No. of Shelves 3, capacity 120Ltrs Construction: Double walled construction outer body made of Mild Steel powder coated, & Inner Body made of Stainless-Steel Insulation: Glass wool insulation between two walls. Temp range: room temperature to 60°C. Accuracy: +/- 0.5 °C. Temp controlled by: Controlled by PID Micro process controller with dual display. Selves: With G.I. wire Mesh selves Door: 2 door inner acrylic door to view sample & outer metal door. with air circulation motor with blower for uniform temperature throughout chamber. Heater: special Nichrome heater designed for long life & saving of power consumption Warranty: 3Years with 5 Years AMC

Autoclave Vertical Make : NST, Ambassador, Optics Technology Specifications:Size-78 ltr/ 98 ltr • It should have double wall construction with boiler made of Stainless Steel 16-gauge sheet. Outer shell is also made of Stainless-Steel Sheet/ Mild Steel. Boiler and outer shell are provided with air insulation. Lid is made of Stainless-Steel Sheet and tightened all-round by radial locking. Joint less gaskets are made of Neoprene rubber. These sterilizers are hydraulically tested up to 40 PSI. • Should have fully automatic PID Controller • Automatic timer electronic 999 mts Sterilizers are fitted with water level arrangement to indicate water position inside the boiler. Pressure gauge, Air/Steam release cock two safety valve are also provided. The autoclave is fitted with indfoss pizzostat and can be set between 10 to 20 PSI. • Immersion type heating element heats the water and steam to desired temp. and pressure are attained. The autoclaves to cut-off automatically when the autoclave is dry. Supplied complete with S.S. basket, cord and plug to work on 220 Volts 50 cycles A.C. supply • Traceability calibration certificate of controller should be provided • Instrument should be calibrated from NABL calibration laboratory. • Includes AMC for 5 years includind 3 years Warrenty.

Pipette Controller for quick fill and release if liquids Make: Microlit, Sartorius, Thermo Fisher Scientific, Brand, Glassco, Borosil Technical Specifications: It will be battery operated electronic pipette filling device and will have Ergonomic design and robust. The pipette must extend smooth operation. The device must have designed to be used for most of the plastic & glass pipettes having volume from 0.1-100 . The device must be autoclavable.It will be Light in weight so it can be used for continuous operation without fatigue and enable single handed operation with minimum efforts. It will have Dual dispensing with a single knob: The instrument will have different modes for dropwise & slow dispensing for fast dispensing). The device will have continuous pump speed adjustment during liquid handling operations. It will have replaceable PTFE hydrophobic membrane filter (0.2microns) to prevents aerosol contamination and accidental liquid entry. Other Technical specifications: Fit: Pipette made of Glass or plastic Size: Pipette of volume size 0.1 ml to 100 ml Battery: Li-On or Ni-Cd batteries Battery charger: Compatible with both 220V and 110V Battery indication: Low battery and charging indication Operation: Minimum 6 hr continuous operation Autoclaving Parameters: Autoclavable at 121 °C and 15 psi for a duration of 10-15 minutes. Warranty: 2 years

Single Channel Variable Volume Micro Pipette Make: Microlit, Sartorius, Thermo Fisher Scientific, Brand, Glassco, Borosil Capacity : 500- 5000 micro ltr With 2 no. tip Pack ( 100 Tips/Pack)