Refurbishment of Room No L-110 allotted office space for Dean SW, Associate Dean SW at 1st floor in Main Administrative building in NITK

Amount

Dismantling Cement Concrete flooring: Dismantling Cement concrete or plain cement concrete, removing and transporting the debris with all lead and lift, cost including labour, transportation charge etc. complete- in all the floor levels

Dismantling plastering: Dismantling wall plastering (either in cement mortar or lime mortar), removing, transporting and disposal of the debris with all lead and lift etc. complete – in all the floor levels.

Dismantling laterite size stone masonry : Dismantling laterite size stone masonry in cement mortar and stacking the material available for reuse at departmental stores including transportation charges etc., complete – in all the floor levels

CM 1:4 – 15 mm plastering : Providing 15mm thick cement plaster in single coat with cement mortar 1:4, to stone masonry / Concrete surface including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labours, coring complete as per specifications

Vitrified glazed tiles flooring & skirting: Providing and fixing Vitrified glazed tiles of approved make, quality and colour of size 600 x 600 x 10mm thick fixed on existing flooring with special adhesive for flooring, skirting and jointed with neat cement slurry mixed with pigment to match shade of tiles, including providing spacers at required interval and removing stains, cost of materials, mortar, labour etc., complete as per specification and direction of the Engineer in charge.

Plaster of paris (Gypsum anhydrous) for ceiling: Providing and fixing in position 12mm thick Plaster of paris (Gypsum anhydrous) for ceiling reinforced with hessian cloth flat surface with ceiling up to a height of 5.0mtr above floor level over aluminium strips 25mm x 6mm and rendered smooth with plaster of paris including cost of materials, labour, curing, plastic emulsion painting etc., complete as per specifications.

Anodized Aluminium partitions: Providing, fabricating, assembling and fixing in position aluminium partition using 101.60mm x 44.45mm x 3.18mm aluminium, mat finish or glossy finish, anodized sections combination of plain, single groove and double groove members should not exceed 0.60m c/c and bottom member of required lengths, joints mitred and corner grinded sub dividing assembled frame should be stiffened with corner angles. Stripped and fixed with screws rawl plug and teakwood guttas to RCC column or masonry on sides. RCC lintels or beams at tops and mosaic floor at bottom; including cutting chistelling and making good with cement mortar to match the surface. Providing and fixing 12mm thick prelaminated sheet (Ecoboard - exterior grade ) of approved colour for bottom panel of maximum height 0.90m, and 5.50mm thick plain or pin headed glass for middle panel and top panel with glazing clips of 19.05mm x 17.30mm.1.00mm . All the aluminium sections used should be treated for removal of any rust and prevention of futher rust formation and coated with greasy materials for non adherence of mortar or any other sticky materials: The vertical members should be embedded in the flooring by making suitable size holes and fixing with cement motar. All the frame should be thoroughly cleaned free from rust, scale or dirt. Work should be carried out as per direction of engineer-in-charge of the work with all lead and lift as per chief Architect’s drawing etc., complete to a degree of perfection.-using aluminium section anodized to 12-15 microns

Aluminium door: Providing, fabricating, assembling and fixing in position aluminium shutters to the existing door frame in the partition using 47.62 x 44.45mm section thickness 3.18mm, weight 1.505kg/m for vertical frame, 47.62x44.45 thickness of 3mm, weight 1.42kg/m for top section, 49.91mm x44.45mm with wall thickness 3mm weight 1.495kg/m for central rail; and 114.3mm x 44.45mm thickness 3.18mm, weight 2.646kg/m for bottom rail; aluminium sections and cut to length joint metred and corners grinded, the bottom rail and top rail hinged or pivoted, opening arrangements including providing and fixing standard approved accessories, such as aluminium handles, tower bolts, lock, pivots: hinges PVC. Or rubber gasket, 12mm prelaminated sheets (Novopan) exterior grade of approved colour both sides same colour for bottom panel of maximum height 0.90m and 5.5mm thick plain glass for top panel (Novopan) and glass fixed with glazed clips 19mm x17.3mmx11mm, 0.9mm thick, weight 0.124kg/m; aluminium sections treated for removal of any rust and prevention of further rust formation, and coated with greasy materials for non-adherance of mortars or any other sticky materials, including cost of materials, fixtures, labour and HOM of machinery complete as per specifications.- using aluminium section anodized to 12-15 microns

Removing, Repairing, Refixing Panelled / glazed Shutters: Removing, repairing, refixing shutters (panelled or glazed) to doors, windows ventilators including cost of materials, labour, HOM complete as per specification and direction of the Engineer in charge.

Wall putty – in 2 coat: Providing applying two coats of wall putty to inside plastered walls and ceiling using white cement putty. Scrapping and levelling the surface using steel blade and preparing the surface even and smooth by using different grade sand papers, including cost of all materials, cost of labour and scaffolding etc., complete as per specifications and direction of the Engineer in Charge.

Plastic emulsion painting for walls with primer: Providing and applying painting in two coats with plastic emulsion paint of approved brand (Asian Emulsion/ Nerolac/ Berger/ Sherwin Williams/ equivalent) over one coat of Asian paints Deco Prime wall primer / equivalent on wall surface to give an even shade after thoroughly brushing the surface, free from mortar drops and other foreign matter including preparing the surface even and sand paper smooth, cost of all material, labour etc complete as per specifications.

Varnishing on previously varnished wood – One Coat : Providing and applying varnishing one coat ( excluding priming coat ) on previously varnished wood / or wood based surface to give an even surface after cleaning the surface of all dirt, dust and foreign matter sand papering so as to produce a smooth dry and mat surface, including cost of materials, labour, complete as per specifications.

Painting to previously painted steel work – in One coat: Providing and applying enamel metal paint one coat ( excluding priming coat) on previously painted steel or other metal surface brushing to give an even shad after cleaning oil, grease, dirt and other foreign matter, including cost of materials, labour, complete as per specifications.

Venitian blind : Providing and fixing 100mm wide venitian blinds of window fashion fabric of Taiwan make, with 50m thick powder coated channel with balance, imported, acrylic self alignable mechanism and equally placed spacers, imported tilting mechanism for easy tilting operation, with nylon imported thread and breading, 100mm wide imported washable reusable fabric placed with top hanger and bottom with 100mm long bottom plate connected to nylon imported bottom link chain. The rate is inclusive of drilling holes for fixing channels to the wall, fixing threads and beadings and link chain, hard ware fixtures etc., complete as per specifications.

Hydraulic door closures- Aluminium body : Providing and fixing hydraulic door closures – Aluminium body for aluminium door / wooden door including cost of material, labour, HOM complete as per specification.

SHRUNGAGIRI CONSTRUCTION

Puneeth constructions

M/s Durgaparameshwari Infrastructures