PROVN OF BDY WALL OF BLDG NO P33 TO P34 (OFFRS ACCN) PROVN OF BITUMINOUS ROAD TO BLDG NO P1F TO P31 (OFFR MES) PROVN OF TOILET BLOCK NEAR GUN SHED AND PROVN OF TOILET BLOCK NEAR OFFICE COMPEX OF 100 FD REGT AT ARMY CAMP JAMSHEDPUR UNDER GE RANCHI

Amount

Excavation in trenches n.exc 1.5m deep and n.exc 1.5Mt wide and getting out in soft/loose soil, complete all as specefied and directed.

M&L PCC (1:4:8) type D-2 using 40 mm graded stone aggregate as in lean concrete for foundation filling & mass concrete, complete all as specefied and directed.

M&L brick work using sub class B bricks straight of curved on plan exc 6m mean radius built in CM (1:6), complete all as specefied and directed.

M&L cement concrete Type B1 1:2:4 ( 20mm graded aggregate) as in coping, complete all as sepcefied and directed .

Returning filling in trenches including spreading leveling and well ramming with water complete n.exc 25 cm thick in each layer in soft/loose soil.

Removing exavated soild n.exc 50 mtr and depositing where directed at a leve n. exc 1.5 mtr above the starting point.

M&L rendering 15 mm thick on fair faces of bricks/concrete surface in cement mortar (1:4) on wall finishing the surfaces even and smooth without using extra cement, complete all as specefied and directed.

S&F for 110mm PVC (SWR) pipes single socked, in any lehgth with rubber righ joints, fixed to walls as weep hole, complete all as specefied and directed.

M/L including preparation of newly plastered wall surfaces and applying two coats of cement base paint of any colour over one coat primer complete all as specefied and directed.

Surface excavation n. exc 30 cm deep and averaging 15 cm deep and getting hard/dense soil, complete all as specefied and directed.

Removing of excavated soil to a distance n exc 50 mtr and deposited, complete all as specefied and directed.

Rolling and consolidating formation surfaces in cutting with 8 to 12 tonne power roller complete all as specefied and directed.

M & L quarried stone or broken boulders 150 mm thick graded spread thickness for rolling sub base of road etc incl ramming / rolling with 8-10 Ton power roller finishing to required size, shape etc as required.

M&L 15 cm thick (complete thickness) WMM in two in two layer with coarse aff of grading broken metal of lime stone and sand stone of grading 2 (63 to 40mm size) spread, rolled with 8 to 10 ton roller and consolidated to required gradient and camber, complete all as specefied and directed.

Preparation of unsurfaced WMM surface by brushing with wire brushes for removing cake mud etc, sweeping with brooms and finaly fanning the cleaned surface with gunny bags to remove all loose, dirt etc and apply evenly primming/tack coat with paving bitumen at 10 Kg per 10 Sqm

M&L premix bituminous, macadam laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) using paving bitumen VG-30 any penetration with using binder content 4% by weight of total mix complete rolling with static power roller of capacity 8 to 10 ton.

M&L Applying evenly a priming/tack coat with bituminous primer using paving bitumen VG-30 at rate of 05 kg per 10 sq meters of road surface, complete all as specefied and directed.

M&L bituminous premix asphaltic semi-dense concrete 40mm consolidated thickness with 5.5% binder content using paving bitumen VG-30 by weight of total mix, rolled and compacted to required camber and gradient complete. Rolling with static power roller of capacity 8 to 10 ton.

Add/Deduct to item above for each extra Kg of binder used.

M&L laying hot applied thermoplastic compound (paint) 2.5mm thick including reflecterising materials glass beads including cost of all materials labour machineries and T&P etc required for proper completion of work including all other charges . The finish surfaces to be level, uniform and free from streaks and holes as per specification No 803 as per IRC painting lines, dashes, arrows and letters etc on roads, pavements and the like not exc 10 cm wide with road marking paint, white or golden yellow, complete all as specefied and directed.

S&F cat eye reflcetive type of metal body alloy of size 100mm X 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS Stud of suitable size complete as per manufacture instruction, complete all as specefied and directed.

S&F solar cat eye aluminium alloy shall (100% water proofing design according to 65) of size 125mm X 125mm X 25mm (shank 65mm) of high efficincy Mono rystafie solar panel 2.4V/0.3 watt one NI-ES rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd complete as per manufacturer ninstruction etc, complete all as specified and directed.

Excavation in trenches not exc 1.5 mtr wide and not exc. 1.5 mtr deep for foundation in soft/loose soil & getting out.

M&L brick work with sub class ‘B’ bricks straight or curved on plan to any radius in half brick wall built in CM (1:4), Complete all as specified and directed.

M&L rendering 15 mm thick on fair faces of bricks/concrete surface in cement mortar (1:4) on wall finishing the surfaces even and smooth without using extra cement.

M & L Brick work with sub class `B` bricks straight or covered on plan any radius built in cm 1:6, complete all as specified and directed.

Damp proof course In cement concrete 1:2:4, type B-0 40mm thick to horizontal or vertical surfaces including nec- essary formwork

Supply only integral water proofing compound. Make - ACCO PROOF/WATER SEAL/ IMPERMO

S&F rolled mild steel as in Joist, channel, angle, or tee sections,fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) Fe 410 -W (Gde- E- 250) quality A

S&F for pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.45mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall,fixed with self tapping srews, complete all as specefied and directed.

M&L GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel at 457mm centre to centre incl 2mm dia G.I. ( upto 1200 mm length ) adjusting level to Purlins/ Rafter. .

M&L 4mm thick non asbestos designer fibre cement building board of size 600X600 fixed or laid/inserted to timber/GI/Aluminium framework fixed in ceiling flat or sloping, complete all as specefied and directed.

M & L cement concrete 1:4:8 type D-2, 75 mm thick as in sub base floors complete all as specified and directed.

M&L for preparing the new plastered surfaces of wall and applying Two coats of cement based paint, complete all as specified and directed .

M&L for 10 mm thick cement plaster in CM (1:4) for backing of tiles, completeall as specified and directed.

M&L for coloured glazed ceramic tiles in vertical surface 300x600x7to8mm thick set and jointed in neat cement slurry & pointed in white or coloured cement to match the surfaces all as specified and directed.

M&L for 15 mm thick screed bed or bedding layer in CM (1:6), complete all as specified and directed.

M&L non skid coloured ceramic tiles 7 to 8 mm thick(square/rectangular) area of each tiles exceeding 0.11 sqm but n.exc 0.18 sqm in floor etc;set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces, complete all as specified and directed.

S&F Vitreous china Full pedestal wash hand basin of size 560 x 430 x 195mm with all accessories and fittings, complete fixed on brackets or erecting stand. Make- Jaquar Cat No.CNS-WHT-811,CNS-WHT-303 or equivalent .

S&F Single Lever Wash Hand Basin Mixer without Popup waste with 450mm Long Braided Hoses with all necessary accesories complete all as specified & directed.Make- Jaquar Cat No. 276010 or equivalent

S&F, vitreous china single piece water closet size 360x640x680 mm with soft close seat cover, Hinges,, fixing accesssories set , incl cistern fitting , connection to P trap, complete and making good to floor complete all as specified and as directed. Make- Jaquar Cat No SLS-WHT-6851P180PP or equivalent

S&F Hand Shower (Health Faucet) with 1 Meter Long Easy Flex Tube in Chrome Finish & Wall Hook with all necessary accessories, complete all as specified & directed. Make- Jaquar Cat No. ALD-565 or equivalent

S&F for 15mm Angular Stop Cock with Wall Flange with all necessary accessories, complete all as specified & directed. Make Jaquar Cat No. OPP-15053PM or Equivlent

S&F two way Bib tap 15mm with Wall Flange and all necessary accessories, complete all as specified and directed. Make Jaquar Cat No. OPP-15053PM or Equivlent

S&F stainless steel towel self 450mm long with lower hanger fixed, completed all as specified & directed. Make-Jaquar Cat no AEC-ESS-1181NA or equivalent.

S&F towel ring squar with round flange fixed, complete all as specified & directed.

S&F PVC connection 15mm size with PTMT Nuts of length 450mm, complete all as specified and as directed.

Solid PVC Door Frame of size 50mm x 47mm made out of 5mm wood grain colour PVC sheet reinforced with M.S. square tube, suppling & fixing in opening as per specification & drawing.

Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing.

S&F anodised aluminium ventilator shutters fixed or louvered type without sash bar, aluminium section weighting not less than 0.55 Kg/M including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws and 4 mm thick figured glass fixed in fram etc, completed all as specified and directed.

S&F extruded aluminium alloy butt hinges 100mm size type B-21, complete all as specefied and directed.

S&F Brass barrel tower bolts 100MM, with cast or sheet barrel and rolled or cast bolts and fixed, complete all as specefied and directed.

S&F Brass, sliding door bolt 200MM with sand or die-cast brass hasp,taple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed, complete all as specified and directed.

S&F Extruded brass handles 100mm,fabricated type polished, complete all as specified and directed.

M&L PCC 1:3:6 type C-2 using 40 mm graded stone agg for concrete bed to drain pipes including , packing under and haunding against the sides of pipe, after they tested for 150 mm dia pipe.

M&L 150 mm dia of reinforced concrete pipe, class NP2, laid and jointed complete with collars, complete all as specefied and directed.

S&F steel tubing and connection tubing in new or old position to walls, ceiling, floors etc including all fitting as socket,elbow,nipple,union etc complete all as directed at site for 15 mm bore, complete all as specefied and directed.

All as per item No 58 above but for 20 mm dia

S & F in repair PVC(SWR) 100 mm outlet dia floor trap, plain with grating in cluding jointing with solvent cement, complete all as specified and as directed.

S&F Vitreous China ladies Urinal pedestal, complete all as specified and directed.

Surface excavation n.exc (not exceeding) 30cm deep and averaging 15cm deep and get ting out soft /lose soil.

M & L PCC 1:5:10 type E2 (40 mm graded aggregate) as in foundation filling and mass concrete.

M&L broken stone or boulder hardcore of gauge n exc. 63mm, deposited, spread and leveled in layers n exc. 15cm thick, watered and rammed to a true surface.

M&L rendering 15mm thick in CM 1:6 finished even and smooth without using extra cement.

M&L rendering 15mm thick in CM 1:4 on fair faces of brick work , finished even and fair without using extra cement, complete all as specefied and directed.

M &L PCC 1:2:4 type B1 using 20mm graded aggregate as in lintels Cills, Steps, Plinth courses, Railings, Copings, Bed plates , kerbs etc. inlcuding weathering slightly rounded or champfered angles and throating etc, complete all as specefied and directed.

Preparing New wall surfaces , chalk whiteneing on plasterd surfaces and applying 2 coats of cement base paint of any shade on walls surfaces, complete all as specefied and directed.

M&L preparation of new plasterd wall surfaces and applying two coat of oil bound distemper of approved colour and shade over one coat putty, complete all as specefied and directed.

S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specefied and directed.

M&L providing aluminum snap Grid frame work for false ceiling with of size 605x605 mm, using main and cross Tee of size 36.5 mm x 25mm x 1.4 mm, weighing 0.24 Kg/RM and 23.5mm x 26.4mm x 1.4mm weighing 0.191 Kg/RM respectively. The snap grid shall be supported at end all along the wall with alu anodized angle of size 40 mm x 25 mm x 2 mm weighing 0.36 Kg/RM . the snap grid shall be fixed to ceiling supporting hangers consisting of 2 mm dia GIS wire, J bolts, nuts and washers as per manufacturer's instructrions. Note : If any aluminum section found of less weight, the same ahall be worked out by actual weight and recovery @ Rs. 230/- Kg shall be made from contractors dues.

M&L 4mm thick Non asbestos designer fibre cement building boards fixed or laid/inserted to timber/GI/Aluminium framework with screws .

S & F factory made prelam solid PVC door frame of size 50 mm x 47 mm made out of 5 mm both side prelam PVC sheet reinforced with mild steel square tube complete as per manufacturer’s specification and drawing and as directed (Rajshree brand or equivalent)

S & F factory made solid panel both side prelam PVC door shutter with feathered edge 30mm thick (style) consisting of frame made out of mild steel tubes for top & bottom rails, Mild steel frame shall be covered with heat moulded prelam coloured PVC ‘C’ channel having a PVC sheet strip of 30mm with steel inside with solvent cement for stiles and plain colour PVC sheet for top rails, lock rail & bottom rail on either side and as gap insert for top rail & bottom rail paneling of plain colour PVC sheet to be fitted in the mild steel frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement, fixing in the frame at site as per specification, drawing and as directed (Rajshree brand or equivalent)

S&F 250 mm aluminium alloy anodized sliding door bolt with hasp staple (bolt type) and fixing clips of sheet,cast or extruded sections and fixing bolts and shiding bolts of extruded sections or cast aluminium alloy and fixed, complete all as specefied and directed.

S/F 100 mm butt hinges, medium weight, extruded aluminium alloy with galvanised mild steel hinge type B-22, complete all as specified and directed.

S&F Floor door stopper of aluminium alloy body and tongure, anodized with hand drawn steel spring fixed in door, overall length of cover plate, size 150mm, complete all as specefied and directed.

S&F aluminium ,anodized 200mm long barrel tower bolts of extruded section,

S & F extruded aluminium anodised alloy handles, fabricated type, size of handle 150 mm, complete all as specefied and directed.

M&L for preparation of new steel surafces of any description not otherwise described , over 10 cm width or girth , priming with a coat of red oxide primer and applyinng 2 coats of synthetic enamel

M&L Cement concrete type C-2, 1:3:6 (40mm graded aggregate) 100mm thick as in sub base

S&F in repair PVC cabinet looking mirror box type of size 355 x 455 mm, complete all as specified and directed.

S & F SS toilet paper holder as approved by Engineer-in-Charge

S&F Brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges, complete all as specified and directed.

S&F aluminium anodised aluminium window shutter Sliding type with frame of anodised aluminium channel section suitable for sliding aluminium shutters weighing not less than 0.55Kg/M including necessary joining cleats glazing clips rubber packing anodised aluminium shop beading screws with two shutter Including 3.5mm thick coloured glass and one shutter with stainless steel wire gauze including necessary locking arrangement and handle etc; as specified etc, complete all as specified and directed.

S & F 3mm thick plain sheet glass ordinary quality & glazing with oil putty n.exc 0.50 Sqm in each pane, complete all as specefied and directed..

S&F Vitreous China Urinal, Half stall type, white , with grating and union for discharge pipe including 15mm bore chromium plated Push tap, 450mm PVC connector, coupling and waste pipe, complete all as specified and directed.

S&F 32 mm bore dia of dishcharge pipe Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm-45gms/40mm-60 gms)

M&L MS TMT 5 mm to 10 mm dia as in stirrups cut to length bent to shape etcand binding with MS wire not less than 0.9mm dia.

M &L TMT bars 10mm and over dia cut to length bent to shape required incl.cranking bending and incl, mild steel wire (anneaued) not less than 0.9mm dia or squaring with clips.

S&F grating doom 100mm dia PT MT weight 25gms

S&F PVC low level flushing cistern 10 ltrs capacity, white symphonic action with ball valve, float and handle including flush pipe and brackets.

S & F steel water tubes, 15mm diameter medium grade galvanized, with all fitting and fixed to walls and ceiling or laid in floors.

S & F steel water tube 20mm dia mtr, med grade galvanized with all fittings and fixed to walls and ceiling or laid in trenches.

S&F stop valve 15mm bore, fancy type cast copper alloy chromium plated , screwed down, high pressure, with crutch or butter- fly handle, screwed both ends for iron pipe or for unions and fixed.

S&F 15mm bore pillar taps chromium plated cast copper allow fancy type with screwed shancks and fixed, complete all as specified and as directed.

S&F 15mm dia bib taps,cast copper alloy with crutch or butter fly and screwed for iron pipe or for brass ferrule and fixed.

M&L 100mm dia Cast iron Nahani trap with grating including jointing to waste pipe fixed in cement concrete type B1(1:2:4), complete all as specefied and directed.

S&F PVC (SWR) 110mm WC connector with lip ring

S&F PVC (SWR) 110mm dia mtr pipe single socketed, in any length with rubber ring joints, laid in trenches or in floors.

All as per ser item No 100 above but 75 mm dia

S & F PVC (SWR) 110mm dia mtr bends any radius

All as per ser No 102 above nut 75 mm dia

M & L 75 mm thick PCC 1:3:6 type C2 (40 mm graded stone aggt)as in plinth protection/foot path etc. finished even and smooth without using extra cement, complete all as specefied and directed.

S&F vitreous china Wash down water closet pan (Pedestal pattern ) white , (excluding fixing bolts , flushinng cistern and Flush pipe), complete all as specefied and directed.

S&F Plastic water closet seat cover white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device

S & F 20mm dia stop valve, cost copper allow screwed down high pressure with captain or butter fly handle, screwed both ends for iron pipes or for unions and fixed, complete all as specefied and directed.

S&F roof trusses (framed) trussed, purlins, crane gantries, rails and fastenings and heavy brackets framing (Beam, Tee, Angle, Channel or flats sections ) including cleats and distance pieces using steel of grade Fe 290 (Gde E-165).

M & L RCC (Nominal mix) 1:2:4 type B1 (20mm graded agg ) as in & for Lintel & chajjas

M & L machine pressed precast concrete coloured Inter locking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 grade with grey cement and pigment, over sand cusion ,over compacted earth complete, make Nitco, Raj Udyog, Swastik paver blocks or any other make as approved by GE complete all as directed and specified.

M & L sand filling under paver including watering and consolidation.

From works to soffits of suspended Lintel & chajja not exceeding 200mm thick with rough finished surfaces of concrete (Horizontal or slopping)

M&L screed bed or bedding layers of cement mortor (1:4) ,20mm thick for laying of floor finches complete all as specified

M&L rendering of cement mortor(1:3), 10mm thick on brick work on concrete surface for laying of tiles all as specified

S & F PVC connection 450mm long with two brass coupline.Pipe of 15mm dia of pressure tating 6kgs/Cm2 complete all as specefied and directed.

M&L glazed ceramic coloured tiles in vertical surface 300mmx 200mmx7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match, complete all as specefied and directed.

M & L Marble work 18 to 20mm thick of any type (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platform and like in cement mortar (1:4) including pointing in white cment (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specefied and directed.

M&L for non skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specefied and directed.

M&L for point wiring alongwith earth continuity conductor with 1100 volts grade PVC insulated and FR multistranded copper conductor cable 1.5 sqmm (Phase - Red, Neutral - Black, Earth - Green) FRLS grade dwawn in and including PVC casing and caping not less than 20mm size and fixing accessories and sunken galvanized pressed steel terminal boxes of thickness not less than 1.12 mm covered with 2.80 mm thick phenolic laminated white sheet cover for mounting switches, sockets, fan regulators complete including 1.0 sqmm copper stranded earth wire for all as specified for the following :-

One light point controlled by one switch.

One fan point controlled by one switch.

One socket outlet 3 pin 5 Amp controlled by one switch on the same board.

M&L point wiring alongwith earth continuity conductor with 1100 volts grade PVC insulated FR multistranded copper conductor cable 2.5 sqmm (Phase - Red, Neutral - Black, Earth - Green) FRLS grade dwawn in and including PVC casing and caping not less than 20mm size and fixing accessories and sunken galvanized pressed steel terminal boxes of thickness not less than 1.12 mm covered with 2.80 mm thick phenolic laminated white sheet cover for one 6 Pin 15 Amp socket outlet controlled by one switch on independent board.Incl. 1.5 Sq mm copper conductor earth wire and connected to common earth dolly on independent board, complete all as specefied and directed.

Supplying and fixing angle holder, insulated polycabonate body with back plate, complete all as specefied and directed.

Supplying and fixing switch piano flush button single pole one way 5/6 amp, complete all as specefied and directed.

Supplying and fixing switch socket combination two in one 5 and 15 Amps multipurpose flush type universal 240Volts. Make - Anchor / Leader / SSK as approved.

Supplying and fixing socket outlet 2 in 1, 5 pin, 5/6 amp, flush type, complete all as specefied and directed.

Supplying and fixing ceiling rose 63 x 25 mm three terminals, complete all as specefied and directed.

Supplying and fixing integrated LED 9 watt, complete all as specefied and directed. Make - Philips or Osram or Wipro as approved.

M&L Tube light fitting 1x 18 Watt LED box type complete with bipin holder electronic ballast suitable for fluorescent tube rod 4 feet long 18W and pre-wired up to main connection of PVC connector inside box include providing one 4 feet long fluorescent rod and providing copper flexible cord twin 0.5 Sq mm from ceiling rise to fitting.

S&F Exhaust fan 300 MM sweep including cutting and chesing ,making hole for fixing, complete all as specefied and directed. model no-Turbo force of Havells

M/S Anjan Kumar Singh