Shifting of Existing H T L T Line and D P which is abstract traffic and Reinstallation of same at road side in supervision of Electric Company

Amount

Shifting of Existing H.T., L.T. Line and D.P. which is abstract traffic and Reinstallation of same at road side in supervision of Electric Company.

Supply of support for overhead line RS joist / H-beam of I.S. standard including welding, drilling of required hole etc. complete as required. H-Beam 152x152mm , Std weight 37.1 kg per meter (11 meter/13 Meter/ 15 meter)

Erection of steel tubular or steel rail pole or H-Beam of length exceeding 10 meters but not exceeding 13 meters in cement concrete 1:3:6 (1 cement :3 coarse sand: 6 graded stone aggregate 40mm nominal size) foundation , base padding & muffing including excavation and refilling etc. as required.(4.55 bags of cement/cmt.)

Supply of support for overhead line RS joist / H-beam of I.S. standard including welding, drilling of required hole etc. complete as required. R.S. Joist 175 x 90 - 19.3 kg per meter

Erection of steel tubular or steel rail pole or H-Beam of length exceeding 8 meters but not exceeding 10 meters in cement concrete 1:3:6 (1 cement : 3 coarse sand: 6 graded stone aggregate 40mm nominal size) foundation, base padding & muffing including exacavation and refilling etc. as required.(4.55 bags of cement/cmt.)

Supplying and drawing All Aluminium Alloy conductor (AAAC) of approved make confirming to IS 398-1979 Pt. IV, including binding at existing insulator, jointing, jumpering, tearing off, connecting etc. as required including clearing of obstacles (if any) 0.05 sq.inch / 30 sq.mm Alloy Aluminium Conductor (Rabbit)

0.075 sq.inch / 48 sq.mm Alloy Aluminium Conductor (Raccoon)

AAAC 0.1 sq inch (100 sq.mm Al. EQ.)- (Dog)

Supplying & drawing/laying of PVC insulated XLPE aerial bunch power cable conductor H2/H4 grade aluminium solid/stranded conforming to IS-14255- 1995, alu. alloy insulated messenger 1100 volts grade cable of approved make in air with necessary material as per specification of required size as mentioned below – 3x95 sq.mm, 1x16(st. light), 1x50(insulated neutral)

3x120 sq.mm, 1x16(st. light), 1x70(insulated neutral)

Laying of underground cable armoured./ unarmoured as per specification in air with approved type of iron clamps complete. 3 / 3½ / 4 Core cable 25 Sq.mm to 120 Sq.mm

Supplying &fixing of spring loaded busbar screwless connector with enclosure of approved make including required clamp, nut, bolt, connection, testing as per specification to complete the job. 3 Phase, 1In+4Out

Shifting, erection, & commissioning of 100/200/315/500 KVA (11/0.433 KV) distribution transformer on existing structure including Bi-metallic clamp, ACSR/AAAC Conductor i/c colour code sleeve, for connection from H.T. Line to transformer as required as per specification.

Supplying of angle/channel flat iron fitting for overhead lines such as cross arms, clamps, brackets, welding and other necessary materials as per specifications.

Labour charges for fixing 'D' brackets of angle iron 50x50x6mm size on existing pole as required

Supplying and erection of 11kV pin insulator complete with large steel head G.I. pin, nut, washer etc. as required.

Supplying and erection of a set of three 11kV disc insulators for 33kV overhead lines with galvanised insulator fittings, ball and socket type, and complete with galvanised strain clamp, bolts, nuts, washers etc. as required.

Supplying and erection of 33kV pin insulator complete with large steel head G.I. pin, nut, washer etc. as required

Supplying and erection of stay set complete (Galvanized) 19mm. Dia x 1.8 meter long stay rod anchor plate of size 300 mm x 300 mm x6.4mm thimble stay clamps, turn buckle (19mm dia x60cm),7/4.00mm dia G.I. Stay wire and strain insulator etc. in cement concrete 1:3:6 (1 Cement : 3 Coarse sand : 6 graded stone aggregate 40mm nominal size) foundation including excavation and refilling etc. as required.

Supplying, installing ,testing of 11 KV D.O. fuse assembly with brass part contact for 11/0.4 KV DP Structure set of 3 with fuse with barrel with required fuse element & other materials as per specification on existing D.P. structure as required.(set of 3nos.) 11 Kv

Supplying and erection of three piece nonlinear resistor type lighting arrestor suitable for 3 wire, 11kV overhead lines with rated voltage of 9kV (rms) with a nominal discharge current rating of 5 KA and complete with galvanised clamping arrangement, G.I. bolts, nuts, washer etc. as required.

Supplying installing, testing & commissioning of outdoor H.T., AB switch assembly set gang operated with brass contact parts, including required GI pipe operating rod, handle & locking arrangement on On- Off position conforming to IS complete with required material and installing on existing DP structure to complete the job as required as per specification.(Set of 3 nos.) 11 KV, 400Amp

Supply of XLPE Insulated power cable (conforming IS-7098 ) 1100 Volt grade/Heavy duty power cable conforming to IS 1554-1100 Volts grade , 2 core /3½ core/4 coreISI MARKED with Alu. Stranded /solid conductor UNARMOURED 2 Core 6 Sq.mm.(XLPE)

Dismantling of existing steel pole, R.S. Joist, girder with bracket clamp insulator or stay from the cement concrete foundation and making the site clear by refilling the pit to ground level i/c transportation to required destination within township.

Dismantling of existing overhead ACSR, AAAC, GI, conductor and making the site clear i/c transportation to required destination within township.

Dismantling of existing H- Beam/RS Joist/PCC/Rail pole i/c accessories such as cross arms, top clamp, V- cross arms, strut, stay & conductor/cable/guarding span complete. The material should be transport & handed over to MPMKVVCL/PWD store.

Painting of pole,pole bracket, cable protecting pipe and its clamps in two coatings of All. enamel based primer as directed by Engineer-in- Charge.

Supplying, installing, testing of earth Coil (coil of 115 turns of 50mm dia, and 2.5 Mtrs. Lead of 4 mm G.I wire.

Supplying and erection of guards for existing overhead lines as required including split insulator required as per specification:Cradle Type

CHALSAENTHONI

MUKESH SHARMA