Providing and fixing of powder coated aluminium door / window frames/ shutters for Multipurpose Indoor Sport Hall at Kishtwar.

Amount

Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Zsections and other sections of approved make (Jinder or Hindalco) conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge glazing,panelling and dash fasteners to be paid for separately.) section to bused for frame101x48x3mm

Powder coated aluminum (minimum thickness of powder coated 50 microns)

For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately.) Powder coated aluminum (minimum thickness of powder coated 50 microns)

Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer in-charge. (Cost of aluminum snap beading shall be paid in basic item.)

With floating glass panes of 4.0 mm thickness (weight not less than 10.00 kg / sqm)

With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg / sqm)

Providing and fixing of powder coated Sliding Bolt ( Earl) 250 mm long including necessary fittings etc. complete.

Providing and fixing of powder coated aluminum handle ( Alumunium American handle 250 mm long) with necessary screws etc. complete as per direction of Engineer-in-charge.

Providing and fixing of Powder coated handle for window minimum thickness 50 micron aluminum flat of size 20 x150 mm

Provinding and fixing of powder coated almunium tower bolt (150 x 12 mm) thick

Provinding and fixing of powder coated almunium tower bolt (100 x 12 mm) thick

Providing and fixing of Hooks (powder coated almunium) of required size

Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board (conforming to IS: 12823 Grade-I type-II) in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in charge.Pre-laminated particle board with decorative lamination on both sides.

M/S GULZAR MATOO AND CO. PROP. GULZAR HUSSAIN MATTOO

SIDDHARTH MEHTA

M/S MOHD ASHRAF SHAN

MR. JEHANGIR AHMAD BUTT

SUDESHA KUMARI CONTRACTOR