Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹39.7 LAccepted-AOC | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹42.0 L+₹1.2 L (2.84%)Rejected-Finance | L2 | Rejected-Finance HIGH BID VALUE | |
| 3 | L3₹42.3 L+₹1.5 L (3.61%)Rejected-Finance | L3 | Rejected-Finance HIGH BID VALUE | |
| 4 | L4₹43.2 L+₹2.3 L (5.76%)Rejected-Finance | L4 | Rejected-Finance HIGH BID VALUE | |
| 5 | L5₹44.9 L+₹4.0 L (9.90%)Rejected-Finance | L5 | Rejected-Finance HIGH BID VALUE |
Tender Value
₹38 L
EMD Value
₹76,000
Closing Date
20 Sept 2023, 6:55 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
COL SUNIL PILLAI
HQ CWE TENGA PIN-900194 C/o 99 APO
CONSTRUCTION OF 02 X SINGLE LIVING OFFRS ACCN FOR HQ MTN BDE UNDER GE 859 EWS
2023_MES_616400_1
8377/E8
Open Tender
Civil Works
Item Rate
180 days
GE 859 EWS
D (a) (i)
8 documents required · 8 mandatory
₹500
GE 859 EWS
₹76,000
Yes
25 Nov 2023
30 Aug 2023
27 Sept 2023
30 Aug 2023
20 Sept 2023
13 Sept 2023
Amount
Surface dressing n.exc 15 cm deep and getting out in soft/loose soil.
Excavating over areas, n exc 1.5 m deep and getting out in any type of soil.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth, for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. nexc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type of soil.
All as Ser Item No. 3 above, but exc 1.50m wide and n.exc 1.50m depth
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed.
Removing excavated material exc. 250m but n.exc 500m and depositing where directed at a level n exc. 1.5 m above the starting point, complete all as specified and as directed.
M & L PCC 1:4:8 type D2 using 40mm graded aggregate as in sub base, foundations,filling and mass concrete complete all as specified and as directed.
M&L for Design mix RCC M-25, as in foundations, including rafts, footings, foundation beams; plinth beams, bases for columns, etc. basement slabs, under-reamed piles and mass concrete, complete all as specified and as directed.
M&L for Design mix RCC M-25, as in Columns, pillars, piers, posts and struts, etc. basement slabs, under-reamed piles complete all as specified and as directed.
M&L for Design mix RCC M-25, as in Beams, cantilevers, projection, bressummers, lintels, etc, complete all as specified and as directed.
M&L for Design mix RCC M-25, as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.
Form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work, for flat rough finished surface, complete all as specified and as directed.
Form work to sides of pillars, posts, struts, piers, columns and stanchions, for flat rough finished surface, complete all as specified and as directed.
Form work to sides and soffits of floor or roof beams, beam haunch ings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc, for flat rough finished surface, complete all as specified and as directed.
Form work to Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick (Horizontal or sloping), for flat rough finished surface, complete all as specified and as directed.
M&L, Mild steel TMT bars 12mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips
All as Ser Item No. 16 above but but 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders
M&L 40mm thick PCC 1:2:4 type B-0 using 12.50mm graded stone aggregate with liquid water proofing compound as per manufacturar instructions as in damp proof course to horizontal or vertical surfaces including necessary formwork, with 200 micron thick polythene film over a coat of hot blown bitumen of grade VG-10 @ 1.5 Kg/m and blended with clean dry sand @ 0.05 Cum/m2, complete all as specified and as directed.
M&L Autoclaved Aerated Concrete (AAC) block Grade-I of min compressive strength 50Kg/cm2 as in masonry in 200 mm thick CM (1:6) or 3-4 mm thin bed mortar / adhesive, complete all as specified and as directed.
M&L Cement plaster (1:4) in two layers 15 mm thick with liquid water proofing compound in outer layer only as per manufacturar instructions on other than fair faces of brick work or concrete surfaces, finished surface even and smooth without using extra cement, including making 12mm wide groove at the junction of walls and RCC elements, complete all as specified and as directed.
M&L Cement plaster (1:6) 15 mm thick on fair faces of brick work or concrete surfaces, finished surface even and smooth without using extra cement, including making 12mm wide groove at the junction of walls and RCC elements, complete all as specified and as directed.
Suppy only liquid water proofing compound.
M&L Virified Ceramic tiles 10 mm thick light colour, (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry/ epoxy mortar and pointed with grout of the same shed as the colour of tiles including 15 mm thick screed bed in CM 1:6, complete all as specified and as directed.
All as Ser Item No. 23 above, but as in vertical surfaces such as skirting, dado etc.
M&L Colour Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry/ epoxy mortar and pointed with grout of the same shed as the colour of tiles including 15 mm thick screed bed in CM 1:6, complete all as specified and as directed.
M&L Colour glazed ceramic tiles in vertical surface 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and as directed.
M & L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.
M & L Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with ditto complete all as specified and directed.
M & L 50mm thick PCC 1:2:4 type B1 using 20mm graded aggregate, laid in panels as in floor, finished surface even and smooth without usibg extra cement, complete all as specified and as directed.
Supply and fix plastic dividing strips, 1.5mm thick, inserted in position, conform to design complete all as specified and as directed.
M&L for well consolidating hard core of broken stone, broken to gauge n exc 63 mm complete all as specified and as directed.
M & L 75mm thick PCC 1:3:6 type C2 using 40mm graded aggregate, laid in panels as in floor, including making construction joint at every 3 m interval and corners of building and filled with bituminious mastic or equivalent filler, finished surface even and smooth without using extra cement, complete all as specified and as directed.
S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS.1161-1979 grade St.-240, complete all as specified and as directed.
S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof overing/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
S&F Pre-painted galvalumealuminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, FIxed with self tapping screws complete all as specified and as directed.
S&F mild steel work as in wind ties for roof sheet including all necessary drilling, bolting or riveting, etc, including all necessary drilling, bolting or riveting, etc, and similar work conforming to Fe-290 Gde E-165, complete all as specified and as directed.
S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flangesof 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat andsteel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and as directed.
S&F 12mm thick Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish after applying two coat of oil bound distemper over one coat of wall care putty, complete all as specified and as directed.
M&L for treating the top surface of filled earth, soil under plinth protection etc with Anti-termite treatment using chemical CHLOROPYRIPHOS 20 EC confirming to IS-8944 or Lindane emulsifiable concentrate of 20% with 1% concentrate, at the rate of 5 litres of emulsion per square etre of surface, complete all as specified and as directed.
Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories, area n.exc 2.00 Sqm each. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose.)
All as Ser Item No. 40 above, but area exc 2.00 Sqm each
Supply only 4 mm thick Sheet glass, ordinary quality, in squares n exc 0.5 sq. m each.
S&F 2nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and as directed.
S&F factory made 2nd class hardwood Glazed and skeleton shutters 35mm, open rebated and prepared to receive glass, gauze, etc, divided into squares, with plain, chamfered or roun ded, mitred and rebated sash bars, any numbers fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a), supplied and fitted to chowkats, complete all as specified and as directed.
Supply only galvanised mild steel wire cloth, 0.50mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples
S&F 35mm factory made Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of 2nd class hard wood rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, complete all as specified and as directed.
Solid PVC Door Frame of size 50mm x 47mm made out of 5mm thick wood grain printed PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing, complete all as specified and as directed.
Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel aving a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and both side Prelam PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Prelam PVC sheet on both side to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.
S&F mild steel framed work as in grills, gratings etc with ends of bars shouldered and riveted or forged into spikes, framed guard bars, barred iron doors etc, conforming to Fe-290, Gde-E-165 all as specified and directed.
M&L for mild steel workas in hold fasts, dowel bars, hooks for hanging fans, plate washers and similar small articles conforming to Fe-290 Gde-E-165
S&F 100 mm Butt hinges, medium weight, cold rolled mild steel.
S&F 150 mm Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts.
S&F 150 mm extruded brass handles, fabricated type polished
S&F 300 mm Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed.
S&F Aluminum extruded section body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg.
S&F 150mm Floor door stopper of brass body and tongue with hard drawn steel spring.
S&F Decorative type Brass /Bronze curtain rods including all fittings such as end stopper, wall/side braclet etc.
S&F 500 ltr capacity PVC water storage tank cylindrical, vertical with closed top with threaded cover hoisted and fixed in position tank capacity 500 Ltr with and including ball valve high pressure of PTMT with epoxy coated Aluminum rod and high density plastic ball screwed for 20mm bore of iron pipe and making connection for inlet and outlet complete all as specified and directed.
Cutting chases, pinning in, making good to facing where required and pointing in Cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc and cutting chases for concealed water pipe etc and making good, cutting not exc 10cm width or girth complete all as specified and directed.
S&F 15mm dia bore GI tubing medium grade fixed to wall or ceiling or laid in floors etc complete all as specified and directed.
S&F 75mm dia PVC (SWR) multi floor trap with grating including jointing with solvent cement including fixing waste pipe etc complete all as specified and directed.
S&F Pedestal vitreous china wash hand basin white flat back of size 450mmx300 mm including cutting for and pinning in ends of brackets or errecting stand but including of fixing of waste pipe and CI brackets complete all as specified and directed.
S&F Vitreous china wash down water closet pan of pedestal pattern with seat cover, white with 'P' or 'S' traps, including connecting to trap and to flushing pipe etc complete all as specified.
S & F 10 litres PVC, Syphonic action type, Flushing cistern low level, white with inlet ball valve float chain and pull and brackets complete.
S&F for 15mm Central Hole brass CP wall mixer for WHB and wall mixing hot & cold water screwed down for iron pipe complete all as specified and directed.
S & F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.
S & F for CP 15mm dia stop cock cast copper alloy with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specified
S & F PVC connection 15mm dia 450 mm long with brass check nuts and washers
S&F for toilet paper holder supar of brass chromium plated fitted to wall with CP/ brass screws of complete all as specified and directed”
S&F CP towel rail 450mm , fixed with chromium plated brass screws
S&F Soap dish, any type, fiexd to plugs with chromium plated brass screws
M&L for two coat of synthatic enamel paint over one coat of red oxide primer on new steel surfaces including prepration of surfaces, complete all as specified and as directed.
M&L for Preparing new plastered surfaces of wall and applying Two coats of acrylic distemper/ distemper oil emulsion (OBD), over a coat of 1mm thick wall care putty all as specified including preperation of surfaces
M&L for Preparing new plastered surfaces of wall and applying Two coats of cement base paint over chak whiting on plastered suefaces, prepara-tory on surfaces of walls all as specified and directed.
Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement, complete all as specified and as directed.
M&L for PCC 1:3:6 type C-1(20 mm graded aggregate) precast cement concrete block masonry with solid blocks exc 10 cm in width and setting in CM 1:6 etc complete.
M&L rendering 15mm thick in CM 1:6 on concrete surfaces finished even and smooth without using extra cement
M&L for providig precast cement concrete in cover slabs using type B1 1:2:4 & setting in CM 1:6
M&L for Plain cement concrete (1:3:6) type C-2, using 40mm graded stone aggregates in surface channel, bed of drains incl form work / moulds complete all as directed.
Extra for fair finishing drain or channels 30 cm inner girth in cement concrete using extra cement including forms, moulds etc.
S&F PVC (SWR) pipes 110mm dia single sockted in any length with rubber ring joints fixed to walls.
S&F PVC (SWR) pipes 150mm dia single sockted in any length with rubber ring joints fixed to walls.
Material and labour for providing PCC (1:3:6) type C-2 as in concrete bed to drain pipes including packing under and haunching against the sides of pipes of bore 150mm on after they are laid and tested complete all as specified and directed..
S&F PVC (SWR) bends any radius , 110mm dia.
Material & Labour for light point wiring with 1.5 sq mm (nominal area), PVC insulated unsheathed (HRFR), 1100 volts grade, multi-stranded copper conductor, in and including PVC conduit pipe of adequate size with all fittings and accessories including wooden/pressed steel steel boxes for housing the switches ( Make of box Prestoplast,Prestoteak), including PVC insulated and unsheathed (HRFR)single core multi-stranded copper conductor cable of size 1.5 sq mm green in colour as earth continuity conductor connected to common earth dolly complete all as specified and directed. Make: Havells/Anchor/Finolex/Richa
All as per item No. 86 here in before, for one 5 pin socket outlet, 5 Amps multipurpose same board using 1.5 Sqmm copper conductor cable (multi-stand) PVC insulated and unseated cable and 1.5 Sqmm copper (multistand) PVC insulated and unsheated earth wire with terminal box of size 175 mm x 100mm 3.15 mm complete. Make: Havells/Anchor /Finolex/Richa
All as per item No. 87 here in before, but for one 3 pin socket outlet 5Amps independednt.
S&F Sub main wiring complete with 2 Run of 6 sqmm cable PVC insulated heavy duly adn unsheathed cable with multistranded copper conductor and drawing through surfaces or concealed in and including PVC conduit of approperiate size and connecting terminal ends including provision of 1 run of 10 Sqmm PVC insulated heavy duty and unsheathed cable with multistranded copper conductor fro earth continuity conductor and connecting to earth duly complete all as directed and specified Make: Havells/Anchor/Finolex/Richa
S&F Switch socket combination in 6 pin 16 Amp modular type complete all as specified & directed.
S&F socket outlet 2/3 pin, 6 Amp modular type complete all as specified & directed.
S&F modular white cover plate with frame 1 module complete all as specified & directed.
S&F modular white cover plate with frame 2 module complete all as specified & directed.
S&F modular white cover plate with frame 3 module complete all as specified & directed.
S&F modular white cover plate with frame 6 module complete all as specified & directed.
S&F modular metal box 1/2 module complete all as specified & directed.
S&F modular metal box 3 module complete all as specified & directed.
S&F modular metal box 6 module complete all as specified & directed.
Supply and fixing lamp holder, insuleted body with pack plate suitable batten fitting on wall complete all as specified and directed.
S&F LED lamp 10 Watt, CDL, B-22 cap, (Pin type), 230W, PF not less tha 0.85 (min). Make- Havells/Crompton/Syska
S&F LED bulkhead fitting 10 watt (Endura Ruby) with all accessories and including connenting up with twin core twisted with flexible copper conductor cable with suitable size of 230 volts , 50 hz complete all as spicified and directed.
S&F switch modular type single pole one way 6 Amp, 240 volt complete all as specified & directed.
Supply and fixing ceiling rose, surface bakelite, 65mm x 50mm , three terminals complete all as specified & directed.
S&F regel batten for LED Tube universal batten for G 13 T8 lamps including making electric connection from Ceiling Rose to tube light fitting including photon ultra plus LED Tubelight 20W (single side connection) Ultra bright LED Polycarbonate Tubelight with 10% THD with very high efficiency suited for installation in existing T8 Tubelight with G13 lamp holders to give glare free light with integrated electronic driver complete all as directed by Engr in Charge.
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete
S&F of new generation energy saving and environmental friendly long life LED building security light made up of innovative die cast aluminium housing high power LED as lighting source with IP - 66 power consumption 35 watt complete input voltage of 150-240 Volt (nominal rated voltage 240 Volt) complete including twisted 3 core copper cable of size 1.5 Sqmm dia for connecting phase, neutral and earth from ceiling rose to light length as required at site including bracket for security light 25 mm dia with clamps & fixing arrangements all as specified and directed.
S&F MCB SPN having braking capacity 10KA, 40-63 Amps, 240 V complete all as specified and directed.
S&F MCB SP having braking capacity 10KA, 6 to 32 Amps, 240 V complete all as specified and directed.
Supply and fix sheet metal enclosures for DBs when MCBs to be used 230 volts 8 way 200 Amp rated busbar single pole and neutral fixed on wall duly grouted on wooden board.
S&F bell/buzzer push modular one way 5/6 Amp,flush type complete all as specified & as directed.
S&F Call bell multi music type electric AC, 240 volt, 50 HZ, surface type complete all as specified & as directed.
S & F Exhaust fan sweep 250 mm voltage 230 V 50 Hz 1200 RPM noiseless Engineering plastic complete light-weight self closing louvers and blades complete all as specified and as directed.Make :- Havells/ Usha/ Crompton
Material & labour for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5mtr below the normal ground level connected to galvanised wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron.Earth wire protected by GI pipe 15 mm bore(medium grade) and connected to main switch board or main control board as directed and as specified and shown in electrical plate No. 3 of SSR Part I (2009) including necessary concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 40 cm x 40cm x 5cm reinforced with 8mm dia TMT bars @ 15cm C/C with one handle for lifting made out of 8mm dia bar, funnel, wire mesh, 20mm dia GI pipe medium grade for watering, charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil and testing complete all as directed by Engineer-in-Charge.
Supply and fixing electric water heater(Geyser), storage type steel body with inner tank and heating element up to 2 KW capacity 25 litre, BEE 5 star rated adjustable temprature setting 0-90 degree C complete with accessories such as safety wall, thermostate, NRV indication lamps, inlet outlet connections,air vent connections, connection pieces including all fixing arrangements such as fastners, bilts, nuts washers etc including making good disturbed wall surfaces matching with the existing surface and finishing complete all as specified and directed by Engr in charge
Supply & lay 3 layer (inner antimicrobial outer UV stabilized),ISI marked, IS-15801, PP-R pipes SDR 7.4 (PN-10) and PP-R plain & brass threaded fittings laid in conealed work complete of size outer dia 25 mm fixed to walls, ceilings or in floors, testing after laying complete all as specified & directed.
Cutting existing steel tubing for alterations or additions (each cut measured) screwing existing steel tubing for alterations or additions for lengthening screw on pipe to form connector of size 50x50x40 mm complete all as specified and directed.
Supplying, laying, jointing & testing cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminum conductor, 1100 volts grade, of size 25 sqmm 4 core as per IS 7098 Pt-II laid in trenches / ducts / encased in GI pipe / fixed to pole complete all as directed and specified. Make : Havells/KEI/Polycab
M & L for laying of fine, clean sand (river sand) free from sharp materials and stone particals in trenches for cushioning of cable 8 cm thick under cable and 15 cm thick over the cable including gently punning complete all as specified and directed. Note:- The total thickness of sand shall be measured 18 cm after punning.
Supply and laying un-reinforced precast.concrete cable protection cover of class LV, type-1, flat size 250mm x 150mm x 40 mm, factory made of specified make , complete all as specified and directed.
S&F GI tubing medium grade, ISI marked conforming to IS 1239 part-I 2004 with and including all fittings such as bends, elbows tees short length socket, union check nuts, nipples fixed laid in trenches/floor/under culvert/road crossing etc and size of 25 mm bore complete all as specified and directed. Note : Excavation & earthwork shall be measured & paid separately
S&F GI tubing medium grade, ISI marked conforming to IS 1239 part-I 2004 with and including all fittings such as bends, elbows tees short length socket, union check nuts, nipples fixed laid in trenches/floor/under culvert/road crossing etc and size of 40 mm bore complete all as specified and directed. Note : Excavation & earthwork shall be measured & paid separately
S & F gun metal gate valve with iron wheel head, screwed both ends for iron pipe and fixed, ISI marked conforming to IS 778 1984 and size of 25 mm complete all as specified and directed.
S & F gun metal gate valve with iron wheel head, screwed both ends for iron pipe and fixed, ISI marked conforming to IS 778 1984 and size of 40 mm complete all as specified and directed.
Cutting existing steel tubing for alterations or additions (each cut measured) screwing existing steel tubing for alterations or additions for lengthening screw on pipe to form connector of size 50x50x40 mm complete all as specified and directed.
M/S ASHOK CONSTRUCTION
D.P. Traders
M/S DKT CONSTRUCTION
M/S N D ENTERPRISE
M/S R D TRADERS
M/S R N ENTERPRISES
M/S SUNRISE CONSTRUCTION AND CO
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .