EP/ELE/10/2024

Amount

Supply, installation, testing and commissioning of 415V, 50 KA, TPN Power Distribution Board made out of 2mm thick CRCA steel with the following components generally as specified in the specification and IE Rules as per components indicated therein. All PDBs shall have: a. LED type R,Y,B indicating lamps with MCBs to be connected on line side - 1 set b. Digital multi function meter with facility to indicate all the 3 line voltages, currents, power, energy to be connected on bus side with necessary CTs, MCBs, etc -1set Make of PDB Panel -OEMs-L&T / Schneider Electric / Siemens or Authorized licensed channel partners of OEMs

325 KVA DG Synchronizing Panel as per attached technical Specifcation: Incomer: 800 A FP microprocessor based EDO FN Air Circuit Breakers with overload, short circuit and earth fault release - 2 Nos (Incomers). Genset Synchronizing Relay - 1 Nos Master Trip Relay with other auxilliary relays - 1 Nos each Battery Charger - 1 Nos Outgoing: 800 A FP microprocessor based EDO TPN Air Circuit Breakers with overload, short circuit and earth fault release - 1 No 250 A TPN microprocessor based MCCB with overload, short circuit and earth fault release with adjustable settings - 4 Nos 160 A TPN microprocessor based MCCB with overload, short circuit and earth fault release with adjustable settings - 4 Nos

Supply

Installation

Installation, testing and commissioning of Emergency PDB in D3 block of size :- 2.6 m(W) * 0.5 m( D ) * 2.175 m(H) with feeder as follows :- Incomer:- 1 No 200A TPN MCCB Outgoing:- 2 Nos 100A TPN SFU 1 No 63A TPN SFU 17 Nos 32A TPN SFU Note: Panel shall be supplied by the department.

Installation

Installation, testing and commissioning of Emergency PDB in CISF Quarter guard block of size :- 1.1 m(W) * 0.3 m( D ) * 2.175m(H) with feeder as follows : Incomer:- 1 No 100A TPN MCCB Outgoing:- 2 No 63A TPN SFU 5 Nos 32A TPN SFU Note: Panel shall be supplied by the department.

Installation

Supply and installation of Vertical model double door, IP 43, TPN/SPN Distribution boards with minimun IP 43 of following sizes Note: RCBO& MCBs shall be C rated and indicative type Makes of DB/MCCB/MCB/RCBO: ABB, LEGRAND, L&T, HAGER, SCHNEIDER, SIEMENS Note: Indicative type MCBs are preferred

12 Way Horizontal SPN MCB DB with following components. a. 16 A DP 30mA RCBO incomer - 1 No b. (6-10)A SP MCB - 8Nos

Supply

Installation

4 Way vertical model TPN MCB DB with following components. a. 32 A, 30mA FP RCBO - 1 No Incomer Outgoings b. 25 A SP MCB - 4Nos c. 16 A SP MCB - 4 Nos d. 6A SP MCB - 4 Nos

Supply

Installation

Supply, Installation, Testing and Commissioing of 415V, 25KA TPN cubicle type feeder pillar boards made out of 2mm thick CRCA steel with aluminium busbars with the following L&T/Siemens/Schneider components as specified in the specification and IE rules for mounting outdoors

a. 100 A TPN SDFU - 02 Nos (Incomers) b. 100 A TPN manual Onload change over switch - 01 No c. 40kVA, 415V/415V dry type lightning transformer with copper winding, required tap changings as per IS 2026, 40kA/pole, 4 pole surge protection device with phase separators/spreaders, suitable isolation for the transformer - 01 Set d. 63 A TPN SDFU - 03 Nos e. 32 A TPN SDFU - 03 Nos f. 32 A, 300mA FP RCBO with 40 A TP contactor controlled with astronomical timer - 04 nos g. LED type R,Y,B indication lamps with HRC fuses to be connected on line side - 01 Set h. Digital multifunction meter with facility to indicate all the three line voltages, current, power, energy to be connected on bus side with necessary CTs, Fuses etc. - 01 set

Supply

Installation

Supply and installation of following light fittings with all accessories like supporting hardware, downrods, junction boxes, required frames etc as required to complete the installation in all respects Makes: PHILIPS, WIPRO,BAJAJ

LED high efficient 2ft X 2ft, generation-V or better, surface cum recess mounted light fitting with CRCA housing, with output >3600 Lumens, Luminaire efficacy of around 120 lm/W, IP20, surge protection of minimum 4KV, driver efficiency >80%, power factor>0.95, THD<10%, CRI>80, CCT-5700K, voltage range 120-270V AC, Ripple<5%, Electrical insulation class-1, EMI/EMC compliance. Frame required for surface mounting shall also be supplied.

Supply

Installation

LED high efficient 4ft batten type light fitting with CRCA housing, with output >2000 Lumens, Luminaire efficacy of around 120 lm/W, IP20, surge protection of minimum 4KV, driver efficiency >80%, power factor>0.95, THD<10%, CRI>80, CCT-5700K, voltage range 120-270V AC, Ripple<5%, Electrical insulation class-1, EMI/EMC compliance.

Supply

Installation

LED Industrial flood light fittings with output >8000 Lumens, Luminaire efficacy of around 120 lm/W, IP65, inbuilt surge protection of minimum 4KV, CRI>70, CCT-5700K, voltage range 120-270V AC, Lifetime of 50,000 burning hours, Insulation class-1

Supply

Installation

LED high efficient 2ft rail mounted type LED tube light fitting with separate LED tubes in CRCA housing, with output >1200 Lumens, Luminaire efficacy of around 120 lm/W, IP20, surge protection of minimum 4KV, driver efficiency >80%, power factor>0.95, THD<10%, CRI>80, CCT-5700K, voltage range 120-270V AC, Ripple<5%, Electrical insulation class-1.

Supply

Installation

Supply and fixing of Angle/batten holder with connection complete with all accessories.

Supply

Installation

LED Industrial street light fittings with lumen output>=8500 lumens, Luminaire efficacy of >=110 lm/W, IP66, surge protection of minimum 4KV, CRI>=70, CCT-5700K, power factor>0.95, voltage range 140-270V AC, Lifetime of 50,000 burning hours, Protection class IEC safety class-1 with associated control gear, driver, all hardware supports as required for installation of fittings.

Supply

Installation

LED Industrial flood light fittings with output >30000 Lumens, Luminaire efficacy >= 120 lm/W, IP65, inbuilt surge protection of minimum 4KV, CRI>70, CCT-5700K, voltage range 180-270V AC, Lifetime of 50,000 burning hours, Insulation class-1

Supply

Installation

Supply and installation of 12.5 M overall length polygonal galvanised high mast pole with cable entry pipe, base plate, foundation bolts, required foundation, concrete pedestal etc. complete as per technical specification. The pole shall withstand wind speed of 55m/sec. The pole shall have following accessories: a. Hot dip galvanized carriage way at the top to mount 04 nos 250 W LED flood light fittings which shall be operated by a mnotorized double drum winch alongwith suitable trailing cable. b. Feeder pillar box made out of 2mm thick CRCA steel comprising 63 A FP MCB, 02 nos astronomical timer, 02 nos of contactor and 04 nos of outgoing MCBs. c. Aviation obustruction fitting with lamp to be fitted at the top. The pole shall be as per IS 2713 (latest). Note1 : Foundation should be as per the details given by the department and rate should be inclusive of foundation and exclusive of cabling and light fittings. Note 2 : Pole shall be hot dip galvanised as per IS which shall be inspected by the department. Note: Pole thickness must account for the corrossion prevailing in the area. Make:Philips/Kumaran/Bajaj/Skipper/KL Industries

Supply

Installation

Supply and installation of 20 M overall length polygonal galvanised high mast pole with cable entry pipe, base plate, foundation bolts, required foundation, concrete pedestal etc. complete as per technical specification. The pole shall withstand wind speed of 55m/sec. The pole shall have following accessories: a. Hot dip galvanized carriage way at the top to mount 06 nos 250 W LED flood light fittings which shall be operated by a mnotorized double drum winch alongwith suitable trailing cable. b. Feeder pillar box made out of 2mm thick CRCA steel comprising 63 A FP MCB, 02 nos astronomical timer, 02 nos of contactor and 04 nos of outgoing MCBs. c. Aviation obustruction fitting with lamp to be fitted at the top. The pole shall be as per IS 2713 (latest). Note1 : Foundation should be as per the details given by the department and rate should be inclusive of foundation and exclusive of cabling and light fittings. Note 2 : Pole shall be hot dip galvanised as per IS which shall be inspected by the department. Note: Pole thickness must account for the corrossion prevailing in the area. Make:Philips/Kumaran/Bajaj/Skipper/KL Industries

Supply

Installation

Supply and installation of 7M long octagonal galvanized steel street light pole of 4 mm thick with minimum 130 mm dia at the base and 70 mm dia at top alongwith suitable integral junction box housing 4 way 30 A connector, 2 pole 6 A MCB for terminating the cables alongwith cable entry pipe, base plate, foundation bolts, required foundation concrete pedestal etc. complete as per technical specification. The pole should have 1 m long cross arm to support 72 W LED street light fitting. Pole shall be as per IS 2713 (Latest). Note1 : Foundation should be as per the details given by the department and rate should be inclusive of foundation and exclusive of cabling and light fittings. Note 2 : Pole shall be hot dip galvanised as per IS which shall be inspected by the department. Make:Philips/Kumaran/Bajaj/Skipper/KL Industries

Supply

Installation

Supply and fixing of 300 mm sweep Single phase heavy duty industrial exhaust Fans with all required supports and accessories. Makes: ALMONARD, BAJAJ, CG, USHA, ORIENT, KHAITAN, MARATHON

Supply

Installation

Supply and installation of 1200 mm sweep rugged ceiling fan of Usha/Bajaj make of BEE 5 Star energy rated with all accessories like down rod, canopy, ceiling roses etc complete. The fan regulator shall be compatible with the chosen BLDC fan.

Supply

Installation

Supply and fixing of 20 A 2pole & Earth Metal clad power socket with 25 A SP MCB control including plug top

Supply

Installation

Supply and pulling of following sizes of flexible FRZH copper wires to be drawn in already concealed/surface mounted PVC conduit/channels with ferruling on both ends excluding cost of conduits, channels and switch boards. Makes: KEC INTERNATIONAL LTD, KEI INDUSTRIES LIMITED, TORRENT POWER LIMITED, UNIVERSAL CABLES LIMITED

1.5 Sq.mm FRZH Copper wire

Supply

Installation

2.5 Sq.mm FRZH Copper wire

Supply

Installation

4 Sq.mm FRZH Copper wire

Supply

Installation

Supply and installation of modular switch boards along with required back box, face plate, frame of following sizes with latest model rugged modular type sparkproof switches and shuttered universal sockets. Makes: CRABTREE MURANO, NORTHWEST ARTISA, LEGRAND ARTEOR, SCHNEIDER ELECTRIC ZENCELO

8 modular switchboard with 8 Nos of 6A switches.

Supply

Installation

6 modular switchboard with 5 Nos 6A switch and 1 no of fan regulator

Supply

Installation

6 modular switchboard with 1 Nos 6A socket controlled by 1 no of 6A switch and 3 nos of 6A switch extra

Supply

Installation

6 modular switchboard with 6 Nos 6A switch

Supply

Installation

6 modular switchboard with 1 Nos 6A socket controlled by 1 no of 6A switch and 1 No 16A socket controlled by 1 no of 16 A switch

Supply

Installation

3 modular switchboard with 1 Nos 6A socket controlled by 1 no of 6A switch

Supply

Installation

2 modular switch board with 1 no of 16 A socket

Supply

Installation

Supply and laying of following sizes of 1.1 KV grade XLPE insulated, PVC extruded inner sheathed, armoured, FRLS PVC ST2 outersheathed cable on cable trays/trenches/ground with all accessories Makes: KEC INTERNATIONAL LTD, KEI INDUSTRIES LIMITED, TORRENT POWER LIMITED, UNIVERSAL CABLES LIMITED

4 Core 6 Sq.mm Cu cable

Supply

Installation

4 Core 16 Sq.mm Al cable

Supply

Installation

3.5 Core 35 Sq.mm Al cable

Supply

Installation

3.5 Core 120 Sq.mm Al cable

Installation only

3.5 Core 240 Sq.mm Al cable

Supply

Installation

3.5 Core 70 Sq. mm Al Cable

Supply

Installation

3 Core 1.5 Sq mm flexible copper cable for pole light to termination box

Supply

Installation

Providing end terminations for following sizes of 1.1 KV grade XLPE insulated and PVC sheathed armoured cables with required hard ware like heavy duty double compressor glands, heavy duty long neck copper lugs etc complete Makes: DOWELLS, JAINSON, HMI, COMET

3.5 Core 240 Sq.mm Al cable

3.5 Core 120 Sq.mm Al cable

3.5 Core 70 Sq. mm Al Cable

3.5 Core 35 Sq.mm Al cable

4 Core 16 Sq.mm Al cable

4 Core 6 Sq.mm Cu cable

4C x 2.5 sqmm armoured multistrand XLPE insulated Copper control cable for battery, Automatic Voltage Regulator( AVR ) & Governor speed control and Restricted earth fault relay

Supply

Installation

24C x 2.5 sqmm Multistrand armoured XLPE insulated Copper control cable for engine control

Supply

Installation

Providing end terminations for following sized of 1.1 KV grade armoured multistrand XLPE insulated Copper control cable with required hard ware like heavy duty double compression cable glands, heavy duty long neck copper lugs etc complete. Makes: DOWELLS, JAINSON, HMI, COMET

4C x 2.5 sqmm armoured multistrand XLPE insulated Copper control cable

24C x 2.5 sqmm Multistrand armoured XLPE insulated Copper control cable

Installation of SUMIP Make Ladder Type 450mm x 100mm depth 4mm thickness Fiber Glass Reinforced Plastic(FRP) Tray along with necessary hardware, accessories such as bends, tees, crosses, reducers, spilcer, clamps and fittings required for installation in existing HT and LT cable trench. Note: Tray will be provided as free issue material by department

Supply and installation of 32 x 20 mm DLP plastic trunking system with required clamps for fixing, cover, end caps etc complete including required accessories like angles and junctions as per requirement. Make: Legrand/ABB/AKG

Supply

Installation

Installation of Maintenance free Earthing system using corrosive resistant copper Rods of size 10 feet x 5/8 inch diameter copper bonded steel rod especially designed for electrical grounding system, non corrosive,non soluble,electrical conductive,treatment with using (GEM)-3 Bags of (per bag-11.33 kgs) ground enchancement material. Construction of masonry chamber with inside clearance of 450 x 450 mm with CI cover, earth station markers, testing, inter connecting earth tape between earthing stations and back fill material.etc. complete. Note: Material shall be supplied by the department.

Installation of pipe earthing stations with copper bonded (min 250 microns of Electrolytic Copper ) electrode (PIP type) of 3.0 Mts long and 80 mm dia including excavation and back filling with maintenance free Ground Enhancing Material (GEM), Construction of masonry chamber with inside clearance of 450 x 450 mm with CI cover, earth station markers, testing, inter connecting earth tape between earthing stations and back fill material.etc. complete. Pit should be as per IS 3043. Note: Material shall be supplied by the department.

Supply, installation, testing & commissioning of following sizes of hot dip galvanised GI strip for interconnecting earth pits and lightning down conductors. The strip shall be laid underground with jointing by welding and G.I machine screws or in ground at 750mm below, The interconnection of earth strip shall be with welded joints. GI nut bolts & washers to be used at test joints. The joints shall be painted with two coats of black bituminous compound for earth strip in ground etc. Suitable test certificate shall be submitted for galvanisation of GI strip as per applicable IS from accredited labs. Note: Rate shall be excluding excavation.

25 x 6 mm hot dip galvanised GI strip including all necessary fixing accessories and effective connection as per specification

Supply

Installation

50 x 6 mm hot dip galvanised GI strip including all necessary fixing accessories and effective connection as per specification

Supply

Installation

Supply and installation of panel front rubber mats of size 2 Mts x 1 Mts with 2 mm thick as per latest IS 15652:2006

Excavation and backfilling in hard ground for laying the cables, back filling with sand for cushioning of cables,bricks for cable protection after laying the cables, consolidation, removal of excess earth, making good of surface to original finish etc complete excluding cost of bricks/Tiles/ Pipes

Suply and installation of structural steel like channels, angles etc for fabriaction and erection of cable trays supports, light fitting supports etc and painting of the same with red oxide and 2 coats of grey enamel paint. Rate should also include the required bolts and nuts for fixing of supports Make of Structural steel: TATA, Vizag Steel, Jindal Ispat, SAIL

Supply

Installation

Supply and installation of cable route markers/Joint markers made out of cast iron of size 250*150*10mm embossed with "LT CABLE" along with 40*40*6mm MS angle of 600mm long and 200*200*300 mm concrete block

Supply and Installation of 2.5 mm thick and 1 M wide,11KV grade panel front rubber mats, Category III, Class B as per IS 15652.

4 No Fire buckets with stand

Danger Board, First aid box, First aid chart, Ear Muffler & Hand Gloves(1.1kV)

Shock treatment chart with written in english & local language of size 1M X 1M and 2mm thick.

Modern Electric Company (BID ID -3133807)

Sri Bhavani Enterprises (BID ID -3131819)

MOTHERLAND BUILDERS (BID ID -3135117)