Construction of Sub Minor/ Water course by UGPL with 17nos. of HR of OR-43 Ex.Km.93.832 OF CLMC

Amount

DI Pipe : Providing and Supplying ISI mark Centrifuggaly cast (Spun) Ductile Iron Pipes (Class K-7) of 100 mm and above all diameter for water works with socket & spigot ends confirming to IS 8329/2000 in the standard working lengths of 4.5, 5.5 & 6m suitable for classification K-7 & K-9 suitable for push-on-joint (rubber gusket D jointing) with cement mortar lining inside the pipes with outside zinc and bittuminous coating. Rates are FOR rate including Inspection & carriage upto site including Contractor profit & overhead charges etc. eccluding GST. DWSD, Jharkhand SOR - M 1026 & Add 10% CP 300 mm dia pipe

350 mm dia pipe

400 mm dia pipe

450 mm dia pipe

500 mm dia pipe

600 mm dia pipe

Providing and supplying in standard lengths High Density Polyethylene Pipe (HDPE Pipe) confirming to IS 4984-4984/14151/12786/13488 (Latest Revision with necessary Jointing materials like mechanical connector i.e. thread/insert joint/quick release coupier joint/compression fitting joint or flanged joints excluding coupler/specials and taxes). DWSD, Jharkhand SOR - Sl No. - M 1028 & Add 10% CP) HDPE Pipe of Material Grade - PE 80-PN 06 110mm dia pipe

125mm dia pipe

140 mm dia pipe

160 mm dia pipe

180 mm dia pipe

200 mm dia pipe

225 mm dia pipe

250 mm dia pipe

280 mm dia pipe

315 mm dia pipe

A) Earth work in excavation (As per IS. 3114/1965) for laying of different types and sizes of pipes so as to give one meter average cover over the socket of pipe with disposal of excavated earth within initial lead and lift as per specification and direction of Engineer in charge (Classification soil item B) - 60% of excavated earth. [JH-DWSD-SOR-3.1.1.1(B)]

B) Earth work in excavation in ordinary rock or soft rock (where blasting is not needed) (Vide classification of soil item-C) with initial lead of 10M and lift of 1.5M including dressing making the sides in proper profile and dressing the bed in proper grad etc. all complete as per specification and direction of E/I. (JH-WRD-SOR-7.1.12.2)-40% of excavated earth

Earth work in filling foundation trenches or back filling of masonry structures with suitable earth in layers not exceeding 150mm thick well watered, rammed and fully compacted and finally dressed with earth obtained from excavation of foundation trenches and kept at a lead of 30m and initial lift of 1.5m complete as per specification and direction of E/I. [JH-WRD-SOR-6.1.16] 80 % of Item No. 2

Supplying labours, tools, tackles, lubricant etc. for laying and jointing C.I.S/S tyton pipes (class LA) in trenches without supplying rubber gasket and making gasket joints including providing night guard, barrier and red light to safe guard against accident all complete (Pipe to be suppllied departmentally free of cost and laying of pipes is to be done as per I.S.S.3114-1985) as per design, specification and direction of E/I. [DWSD SOR 3.1.32.b] 300 mm dia pipe

350mmdia pipe

400mm dia pipe

450mm dia pipe

500 mm dia pipe

600 mm dia pipe

Supplying labours and tools for laying and jointing H.D.P.E. pipes in trenches and making butt welded joint,supplying heating mirror,jack etc. and providing night guard , barrier & red light to safe guard Against accident , all complete as per specification and direction of E/I will be suppied departmentallty free cost) [DWSD SOR 3.1.37] 110mm dia pipe

125 mm dia pipe

140 mm dia pipe

160 mm dia pipe

180 mm dia pipe

200 mm dia pipe

Lowering, Laying and Jointing H. D. P. E./M. D. P. E. pipes in proper position including all specials by compression fitting/electrofusion and butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/ butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 Part II. [MJP P-106] Section - I/H.D.P.E PIPES, Page-115 225mm dia pipe

250 mm dia pipe

280 mm dia pipe

315 mm dia pipe

Providing and supplying ISI standard D.I specials & fitting with sealing rubber gasket of S.B.R complete with cast iron follower gland and M.S nut & bolts coated or otherwise protected from rusting and suitable for D.I pipes complete as per IS-9523 class K-12. NOTE-The Rates are F.O.R at worksite in Jharkhand inclusive of Roylalty,inspection charges & other taxes but exclusive of GST [JH-DWSD-SOR- Part B - M 1027 & C.P. @ 10% added. Fittings 200- 300mm dia

Fittings 350- 450mm dia

Fittings 500- 600mm dia

Providing double flange sluice valve (Size 50mm to 1200mm) confirming for IS-2906/14846 including worn gear arrangements as per test pressure stainless steel spindle, caps transportation etc. all complete. [JH-DWSD-SOR-1039B] DWSD SOR Item - M1039 B (Without bypass arrangements) PN-1 100mm

Providing double flange sluice valve confirming for IS - 2906/14846 including worn gear as per test pressure stainless steel spindle caps transportation etc all complete FOR Rate including all taxes. (Without byepass arrangement - PN-1.6) JH-DWSD-SOR-M-1039-C (Scour Valve) 100mm

Supplying labour and tools for fixing C.I. sluice valve in trenches with a pair of C.I. Tail piece, including making lead caulked joints and flanged joint as per I.S.S. specification, including supplying all jointing materials (Pig lead confirming to I.S.S. 782-1978, yarn confirming to I.S.S. 6587-1972 and nuts and boilts confirming to I.S.S. 1364-1983) including drilling holes in flanges if required as per specification and direction of E/I (Sluice valve and pieces to be supplied departmentally free of cost). JH-DWSD-SOR-3.1.35 100mm

Providing and supplying Kinetic Double Orifice type Air Valves confirming to IS 14845 as per MJP’s standard specifications combined with screw down isolating valve, small orifice elastic ball resting on a gun metal orifice nipple, large orifice vulcanite ball seating on moulded seat ring, inlet face and drilled, including insurance, third party inspection charges, loading, unloading, transportation upto departmental stores, excluding GST levied by GOI & GOM in all respect etc. complet.. MJP SECTION I: PIPE APPURTENANCES . 8.a Pg 137 PN - 1.0 80mm

Supplying labour & tools for fixing C.I. double acting Air valve in trenches as per specification and direction of E/I. (C.I double acting Air valve to be supplied departmentally free of cost) JH-DWSD-SOR-3.1.42 80 mm

Supplying tools and cutting road as well restoring the same as per specification and direction of E/I. 47 Nos. of Road crossing for different dia of pipe i) Pucca Road cutting- 40% of "&C70&" [JH-DWSD-SOR- 3.1.19.1A]"

"ii) W.B.M. Road cutting- 30% of " &C70&" [JH-DWSD-SOR- 3.1.19.1B]"

Dismentaling plain cement or lime concrete work including stacking servicable materials in countable stacks within 15 meter lead and sisposal of unservicable materials with all leads all complete as per direction of E/I. [JH-BCD-SOR- 5.10.2]

Providing PCC M-150 in nominal mix of (1:2:4) in foundation with approved quality of stones chips 20 mm - 6mm size graded and clean coarse sand FM 2.5 to 3.0 including screening shuttering mixing cmenet concrete in mixer and placing in position vibrating striking curing taxes and royalty all complete as per building specification [JH-BCD-SOR-5.3.2.2]

Labour charge for one cutting of cast iron pipe and specials including supplying, necessary tools and plants, chipping or filling the surface finish as per specification and direction of E/I.B211 [JH-DWSD-SOR- 3.1.43] 300 mm dia pipe

350 mm dia pipe

400 mm dia pipe

450 mm dia pipe

500 mm dia pipe

600 mm dia pipe

Supplying labours, tools and tackles for testing of laid C.I. or U.P.V.C or H.D.P.E. or A.C. pressure pipe upto 60metre head of water all complete as per specification and direction of E/I. (Water to be supplied free of cost departmentally) (JH-DWSD-SOR-3.1.46) 110 mm dia pipe

125 mm dia pipe

140 mm dia pipe

160 mm dia pipe

180 mm dia pipe

200 mm dia pipe

225 mm dia pipe

250 mm dia pipe

280 mm dia pipe

300 mm dia pipe

315 mm dia pipe

350 mm dia pipe

400 mm dia pipe

450 mm dia pipe

500 mm dia pipe

600 mm dia pipe

COLLECTING WELL- Earthwork in excavation of foundation trenches of toe wall, spillway, head regulator, outlet, intake well etc. as per designed section in all kind of soil including moorum soil, soil mixed with kankar, pebbles & boulders upto 300m size & disposal of the same (beyond 50 m away from the edge of the trenches) with initial lead of 150 M & initial lift of 1.50M as per specification & direction of E/I. Extra for earth work in all kinds of soil for each additional lift of 1.0 M or part there of over the initial of 1.5m as per specification and direction of E/I. [JH-WRD-SOR- (5.1.14.1 + 5.1.21.1)

Earthwork in excavation of foundation trenches of toe wall, spillway, head regulator, intake well and outlet etc. as per designed section in ordinary rock or soft rock (where blasting is not needed) (Vide classification of Soil Item-C) with disposal of soil (beyond 50m from the edge of the trenches) with initial lead of 150 m & initial lift of 1.50m as per specification & direction of E/I [JH-WRD-SOR- 5.1.15.2]

Extra for earth work in all kinds of soil for rock additional lift of 1.0 M or part there of over the initial of 1.5m as per specification and direction of E/I. 5.1.21.2 wrd 1st lift -1.5 to 2.5 M :-(1.5 to 2.13M) (5.1.15.2+5.1.21.2)

Supplying materials and labour for providing R.C.C. well curb (1:2:4) including centering and shuttering but excluding the cost of reinfo- rcement all complete jpb as per specification and direction of E/I.(JH-D.W.S.D 3.1.68)

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level. BCD 5.3.9.1

Providing 12mm, cement plaster (1:3) with clean coarse sand of F.M. 1.5 including screening , curing with all leads and lifts of water , scaffholding taxes and all complete as per building specification and direction of E/I BCD 5.7.1

Providing Tor steel reinforcement of 8 mm dia rods as per approved design and drawing excluding carriage of M.S. bars to work site,cutting ,bending and binding with annealed wire with cost of wire ,removal of rust , placing the rods in position all complete as per building specification and direction of E/I. TMT Fe 500 (Only valid for TATA (Tiscon), sail,JSPL,Electosteel,Steels Ltd. Bokaro and vizag(RINL)) BCD 5.5.4

TURN OUT Earthwork in excavation in foundation trenches in ordinary soil (vide classification of soil item-A) disposal of excaveted earth as obtained to a distance upto 50 M including all lift levelling, ramming the foundation trenches, removing roots of trees, shurbs all complete as per approved design, building specification and direction of E/I. [JH-BCD-SOR- 5.1.1]

Providing coarse clean sand in filling in foundation trenchesor in plinth includingrall materials, labour, royalty and taxes all complete as per building specificationand direction E/I. (Mode of measurement compacted volume) [JH-BCD-SOR-5.1.10]

Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 min nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days. [JH-BCD-SOR- 5.3.1.4]

Providing precast R.C.C.M-200 with nominal mix of (1:1.5:3) of desired size with approved quality of stone chips and clean coarse sand of F.M. 2.5 to 3 including curing, shuttering carrying the slab manually to site and laying in position all complete (but excluding the cost of reinforcement) taxes and royalty, all complete as per building specification and direction of E/I. [JH-SOR-BCD- 5.3.2.1

Supplying fitting and placing HYSD bar reinforcement in sub-structure complete as per drawing and Technical Specifications. [JH-BCD-SOR- 5.5.5(a)] 10mm dia

Providing 12mm. Thick cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. [JH-BCD-SOR- 5.7.3]

Providing designation 75 B brick flat soling joints filled with local sand including cost of watering taxes royalty all completeas per building specification and direction of E/I. [JH-BCD-SOR- 5.6.3]

Providing designation 75 A brick work in CM(1:6) in foundation and plinth with approved quality of clean coarse sand of F M 2 to 2.5 including providing 10mm thick mortar joints. cost of screening materials raking out joints to 15mm depth,curing,taxes and royalty all complete as per building specification and direction of E/I [JH-BCD-SOR- 5.2.3]

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) 5.3.1.2 BCD

Filling in foundation trenches and plinth in layers not exceeding 150mm thick well watered, rammed, fully compacted and fine dressed with earth obtained from excavation of foundation trenches within a lead of 50M specificfation and direction of E/I. (Mode of measurement compact volume) [JH-BCD-SOR-5.1.7]

Providing shuttering including stutting proping etc. and its removal after use in foundation as per specification and direction of E/I. 7.3.18 WRD

Providing shuttering including stutting proping etc. and its removal after use in various components of canal structure or embankment structure as per specification and direction of E/I. 7.3.19 WRD

Providing centering including strutting and proping etc. and removal after use in deck slab as specification and direction of E/I. 7.3.20 WRD

Providing and fixinng in position 25mm thick bitumenous board (shallitex or equivalent ) as per I.S. 1838-1983 in expansion or construction joints , all complete job as per specification and direction of E/I. 7.8.3 WRD

Supplying , fitting and fixing rubber seal (water stop) of approved quality for construction joints complete job as per specification and direction of E/I. 7.8.2 WRD

Providing weep hole with dry graded stone filter of 20mm to 40mm size in direction abutment and wing wall as per specificatin and direction of E/I. 6.7.6 (6.9comman item) WRD

Carriage Bricks - 25 KM

Sand - 17 KM

Stone Chip - 75 KM

Cement - 72 KM

Steel - 72 KM

Add for operation and maintanance 1st year

Add for operation and maintanance 2nd year

Add for operation and maintanance 3rd year

Add for operation and maintanance 4th year

Add for operation and maintanance 5th year

Add GST @18%

Add Labour Cess @1%

RADHE CONSTRUCTION