86/EEC/BSNL/CD/BGL/2023-2024

Amount

Demolishing lime concrete manually/ by mechanical means and disposal of material within 50 metres lead as per direction of Engineer in-charge

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.

Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge..

In cement mortar

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead:

Of area 3 sq. metres and below

Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.

For thickness of tiles 10 mm to 25 mm

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.

All kinds of soil.

Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared.

Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material.

Beyond 60 cm girth up to and including 120 cm girth

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :

1:2:4 (1 Cement : 2 coarse sand(zone-III) derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources).

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc., up to floor five level, excluding the cost of centering, shuttering and finishing :

1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

Centering and shuttering including strutting, propping etc. and removal of form work for :

Foundations, footings, bases for columns.

Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer’s specification.

Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25 mm with two chromium plated brass brackets fixed withC.P. brass screws and PVC sleeves etc., wherever necessary complete :

20 mm dia

Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets :

20 mm dia (heavy type)

Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :

Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete :

Providing and fixing aluminium handles ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.

Single rubber stopper

Providing and fixing 2nd class teak wood lipping/ moulded beading or taj beading of size 18X5 mm fixed with wooden adhesive of approved quality and screws/ nails on the edges of the Pre-laminated particle board as per direction of Engineer-in-charge.

Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete.

Double strip (horizontal type)

Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.

1.0 mm thick.

Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete.

With available beading.

Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with available M.S. Flat and nuts & bolts complete.

Galvanised mS wire gauze of 0.63 mm dia wire and 1.4 mm aperture on both sides.

Providing and laying Ceramic glazed floor tiles of size 300x300 mm(thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc.,., complete.

Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kgper sqm including pointing the joints with white cement mixed with pigment of matching shade complete.

Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated ‘J’ or ‘L’ hooks, bolts & nuts 8 mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified.

2mm thick flat.

12 mm cement plaster of mix :

1:6 (1 cement: 6 fine sand)

12 mm cement plaster finished with a floating coat of neat cement of mix :

1:3 (1 cement: 3 fine sand)

Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer, of required shade and colour all complete :

New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :

Two or more coats on new work.

Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and of required shade and colour complete to give and even shade.

Old work (one or more coats)

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.

One coat.

Two coats.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :

One or more coats on old work.

Finishing walls with Acrylic Smooth exterior paint of required shade :

Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface).

Old work (One or more coat applied @ 0.90 ltr/10 sqm).

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-harge.

With cement mortar 1:4 (1 cement : 4 fine sand).

Renewing glass panes and refixing existing wooden fillets:

Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm).

Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings andfixtures complete, including cutting and making good the walls and floors wherever required :

W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:

White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap

Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete :

White solid plastic seat with lid

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.

Semi rigid pipe : 32 mm dia

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :

100 mm diameter

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.

15 mm nominal bore

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.

15 mm nominal bore.

Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour.

15 mm nominal bore with 30 cm length.

Supplying and fixing C.I. cover 300x300 mm without frame for gully trap (standard pattern) the weight of cover to be not less than 4.5 kg.

Providing and filling light weight cinder in sunken portions etc. complete as per directions of E-I-C (Nominal size 20mm)

P/F SWR grade fittings of approved make and manufacture

100 mm dia bend

75MM DIA BENDS

110MM DIA BENDS with access door

75MM DIA BENDS with acess door

P/F PVC SWR grade pipes of approved brand and manufacture including fixing it in position using solvent or cement mortar ,all complete as directed by Engineer-in-Charge

75mm dia

110mm dia

P/F PVC MULTI FLOOR TRAPS of approved brand and manufacture; 110mmx75 mm including breaking open and removing the damaged floor trap and making good the same with white cement all complete as directed by Engineer-in-Charge.

Providing and fixing stainless steel grating with or without hole for waste pipe for covering existing floor/nahani trap (a)100mm dia

Providing and fixing C.P. brass bib cock /stop cock of approved quality conforming to Is standards .Cost includes removal of non-funtional/worn-outbibcock/stop cock etc complete as directed by the Engineer in charge.

Providing and fixing 15 mm Health faucet of C.P brass head and P.V.C connection pipe of approved make etc. complete as per the directions of Engineer-in-Charge. Cost includes removal of non-funtional/worn-out health faucet.

Providing and fixing C.P brass two in one tap including fittings of approved make etc. complete as per the directions of Engineer-in-Charge.Cost includes removal of non-funtional/worn-out Two -in- one tap.

Removing and refixing of wash basin for maintenance and repair works including brackets, screws etc. complete as per the direction of Engineer-in-charge.

Removing and refixing the PVC door shutter after removing the dmaged hinges and fixinf with new butt hinges etc complete as directed by the Engieer in charge.( Note: The cost of butt hinges shall be paid separately)

Providing and fixing 15mm C.P Brass pillar taps of approved quality conforming to IS. Standard of approved make etc. complete as per the directions of Engineer-in-Charge. Cost includes removal of non-funtional/worn-out pillar tap

Providing and laying Ceramic matfinish floor tiles 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red, Brown laid on 20 mm thick CementMortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cementand matching pigment etc., complete. as directed by the Engineer in charge.

Providing and fixing granite stone for door sill, size 40 mm to 75mm width, thickness 25mm to 40mm and length up to 1.5m fixed in position with metal paste or suitable adhesive etc. complete as per the directions of Engineer-in-Charge.

Providing and fixing Brass spindle of approved quality to pillar cock / stop cock /bib cock/ concealed stop cock of 15mm or 20 mm nominal bore by replacing the damaged spindle complete as per the direction of the Engineer in charge. Brass spindle of approved quality for concealed stop cock of 15mm or 20 mm nominal bore

"Providing and fixing 600x100x4 mm high grade ABS(Acrylonitrile Butadiene Styrene) shelf with edges round off,with guard rail complete fixed with 40 mm long screws, rawl plugs etc.,complete" as directed by the Engineer in charge

Providing necessary repairs to the damaged MS windows/doors by removing the door shutter (either by cutting/ burning the hinges using gas welding machine at site or by removing the shutter after removing the screws and butt hinges as the case may be) and refixing the door in original position after removing the bend/ undulations in the door (members either horizontal or vertical or replacing the member it self (if required) including making good the damaged portion with necessary enamel painting (two or more coats over a coat of steel primer) all complete as per the directions of Engineer in charge.

MS DOOR Shutters (Note: The approximate door area to be repaired shall be 2.5sqm (2) The cost of MS sections if used shall be paid separately )

Windows Shutters.( (Note: The approximate door area to be repaired shall be 1.5sqm (2) The cost of MS sections if used shall be paid separately ,Cost includes removal and refixing of existing glass panes)

ventilator Shutters.( (Note: The approximate door area to be repaired shall be 1sqm (2) The cost of MS sections if used shall be paid separately ,Cost includes removal and refixing of existing glass panes)

Repairs to PVC flushing cistern of 10 Ltr capacity of any make and size including removing and replacing worn-out/non-functional parts like syphon washer, ball valve, flushing knob , siphon set, 32mm dia fulsh bend etc. wherever required complete as per the directions of Engineer-in-Charge. (a) Providing and fixing PVC flushing cistern syphon flush valve system with washer of approved quality

Providing and fixing wire gauge ply wood (BWR)shutters using MS wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63mm as per IS :1568 for doors, windows and clerestory windows including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per directions of Engineer-in-charge: 30 mm thick shutters

Removing peeled out lamination sheet from cupboard shutters( area up to 15 sqm) etc complete as directed by the Engineer in charge.

Pruning, trimming, of tree branches including removal of cut materials upto 50mt. lead and as per direction of officer in charge (necessary T&P shall be arranged bythe contractor).(a)

(ht 15 feet and above) and gith up to 30cm

Cleaning of water tank on terrace approximate capacity of 1500 litres manually using bleaching powder including necessary rubbing and cleaning of internal surfaces with clean water to make the tank odour free.

Removing the damaged rain water pipe by dismantling the brick work,concrete and fixing rain water pipe with necessary concrete 1:2:4 ( onw cement :two coarse sand: 4 stone aggregate 20mm) for 0.6x0.6m 50mm thickness with necessary water proofing compound finished with 12mm cement plaster 1:3 (1 cement :3 fine sand) and a coat of necement cement rounding the edge and making and fininishing the outlet complete.( Note: cost of rain water pipes shall be paid for separately.Te approximate area of concrete to dismantled is 0.5 sqm)

Polishing of Terrazo tiles flooring using polishing machine including washing with oxalicic acid wash, all complete as per the directions of Engineer -in-Charge.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

cleaning of toilet wall tiles f,floor tiles , EWC/ IWC,Wash basin including removal of dirt/dust,hard water stains,yellow/brown spots from corners,appliances using scrubbing machine and mild chemicals etc complete as directed by the Engineer in charge. Note: The tiles area to be cleaned up to 20sqm,EWC/IWC -1no and wash basin-1no)

Providing and fixing cup board shutters 19 mm thick, ply wood (BWR) grade including IInd class teak wood lipping of 19mm wide x12 mm thick with necessary screws and bright finishedmild steel piano hinges complete as per direction of the Engineer-in-Charge

Providing and fixing ply wood board 19mm thick (BWR) grade marked, in shelves with screws and fittings wherever required,etc complete as directed by the Engineer in charge..

Providing and fixing frameless edge polished glazed side hung cubboard shutter of approved brand and manufacture with glass knob and Chromium plated brass pivot hinges , including making necessary holes etc., for fixing required fittings, all complete as per direction of Engineer-in-charge .With5 mm thick plain glass with edging.

P/F LOCKS TO MAIN DOORS (Either MS OR Wooden doors in all S/Q in WMS) Safety locks of approved make( GODREJ OR EQUIVALENT) of 7 levers with necessary allied civil works (Such as welding at site for fixing the lock in position etc depending upon the site requirements and type of door) all complete as directed by Engineer-in-Charge

Providing and fixing CP brass towel rail complete with brackets fixed to wooden cleats with CP brass screws with two CP Brackets a) 600X20mm complete as per irection of Engineer in charge

Arresting leakage in walls by applying brush bond or equivanet over the plastered surface etc complete as per directions of the Engineer-in-charge.

Credit to the department by the Contractor for taking (a)dismantled damaged / defective C.P Brass/Brass/Gunmetal fittings such as ,Bib cocks , stop cocks, angle cocks, gate valves , ball cocks , waste couplings , towel rail , towel ring, Shower rose and other items identified by Engineer-in-charge.

Providing and fixing ss mosquito mesh panelled door shutter of required colour and approved brand and manufacture, with aluminium rails and styles, with of size39x15mm with aluminium hinges of on one side and magnetic catcher on other side etc complete as directed by the Engineer in charge.