Annual M and R work of residences located at various departmental colonies under Moradabad zone district Moradabad(Loco shed colony, Tubewell colony and chakkar ka milak colony) and annual M and R work of CZE(D) Moradabad office MBD for FY 2026-27

Excavating, supplying, stacking and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in foundation trenches, plinth, sides of foundation etc. complete for all lift. DSR Code 2.25 (a)

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. DSR Code 2.27

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) DSR Code 4.1.2

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) DSR Code 4.1.3

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) DSR Code 4.1.10

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing:1:1½:3 (1 cement : 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). DSR Code 4.2.2

Providing and fixing up to floor five level precast cement concrete string or lacing courses, copings, bed plates, anchor blocks, plain window sills, shelves, louvers, steps, stair cases, etc., including hoisting and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), cost of required Centering complete. 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20mm nominal size derived from natural sources) DSR code 4.5.1

Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 12.5mm nominal size derived from natural sources). DSR Code 4.10

Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification. DSR Code 4.12

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) DSR Code 5.1.2

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). DSR Code 5.2.2

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). DSR Code 5.3

Reinforced cement concrete work in arches, archribs, domes, vaults, shells, folded plate and roofs having slope more than 15° up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). DSR Code 5.5

Centering and shuttering including strutting, propping etc. and removal of form for. Foundations, footings, bases of columns, etc. for mass concrete. DSR Code 5.9.1

Centering and shuttering including strutting, propping etc. and removal of form for. Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. DSR Code 5.9.2

Centering and shuttering including strutting, propping etc. and removal of form for. Shelves (Cast in situ) DSR Code 5.9.4

Centering and shuttering including strutting, propping etc. and removal of form for. Lintels, beams, plinth beams, girders, bressumers and cantilevers. DSR Code 5.9.5

Centering and shuttering including strutting, propping etc. and removal of form for. Columns, Pillars, Piers, Abutments, Posts and Struts. DSR Code 5.9.6

Centering and shuttering including strutting, propping etc. and removal of form for. Suspended floors, roofs, landings, balconies and access platform with water proof ply 12 mm thick DSR Code 5.9.20

Centering and shuttering including strutting, propping etc. and removal of form for. Lintels, beams, plinth beams, girders, bressumers and cantilevers with water proof ply 12 mm thick DSR Code 5.9.21

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Mild steel and Medium Tensile steel bars. DSR Code 5.22.1

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Mild steel and Medium Tensile steel bars DSR Code 5.22A.1

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) DSR Code 6.1.2

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) DSR Code 6.4.2

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand) DSR Code 6.13.2

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).Sal wood DSR Code 9.1.2

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : Second class teak wood DSR Code 9.7.1

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : Float glass panes 4 mm thick glass pane (weight not less than 10kg/sqm). DSR Code 9.7.7.1

Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws :35 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size Second class teak wood DSR Code 9.27.1.1.1

Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete : 25 mm dia DSR Code 9.46.3

Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete. With second class teak wood beading 62X19 mm DSR Code 9.51.1

Providing and fixing bright finished brass handles with screws etc. complete: 125 mm DSR Code 9.81.1

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. DSR Code 9.82

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. DSR Code 9.83

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :250x10 mm DSR Code 9.97.2

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :200x10 mm DSR Code 9.97.3

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 150x10 mm DSR Code 9.97.4

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :100x10 mm DSR Code 9.97.5

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :125mm DSR Code 9.100.1

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :100 mm DSR Code 9.100.2

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Twin rubber stopper DSR Code 9.101.2

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. DSR Code 10.1

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.80x1.25 mm M.S. laths with 1.25 mm thick top cover DSR 10.6.1

Providing and fixing ball bearing for rolling shutters. DSR Code 10.7

Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete. Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides DSR Code 10.29.2

Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes DSR Code 10.30.1

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate DSR Code 11.3.1

Brick on edge flooring with bricks of class designation 7.5 on a bed of 12 mm cement mortar, including filling the joints with same mortar, with common burnt clay non modular bricks: 1:6 (1cement : 6 coarse sand) DSR Code 11.1.2

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily: Glazed Vitrified tiles Matt/Antiskid finish of size. Size of Tile 600 x 600 mm DSR Code 11.41A.3.1

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.Glazed vitrified floor tiles polished finish of size. Size of Tile 600 x 600 mm DSR Code 11.41A.2.1

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. DSR Code 11.37

Providing and fixing glass strips in joints of terrazo/ cement concrete floors. 40 mm wide and 4 mm thick DSR Code 11.13.1

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :25 mm thick. DSR Code 11.26.1

Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. DSR Code 11.27

Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness. DSR Code 11.43

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.. DSR Code 12.50

Providing and fixing precoated galvanised steel sheet roofing accessories of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Ridges plain (500 - 600mm) DSR Code 12.51.1

12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand) DSR Code 13.4.1

12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand) DSR Code 13.4.2

Neat cement punning. DSR Code 13.18

Rough cast plaster upto 10 m height above ground level with a mixture of sand and gravel or crushed stone from 6 mm to 10 mm nominal size, dashed over and including the fresh plaster in two layers, under layer 12 mm cement plaster 1:4 (1 cement : 4 coarse sand) and top layer 10 mm cement plaster 1:3 (1 cement : 3 fine sand) mixed with 10% finely grounded hydrated lime by volume of cement.Ordinary cement finish using ordinary cement DSR Code 13.19.1

Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers.. DSR Code 13.21

White washing with lime to give an even shade : New work (three or more coats) DSR Code 13.37.1

Colour washing such as green, blue or buff to give an even shade : New work (two or more coats) with a base coat of white washing with lime DSR Code 13.39.1

Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre. DSR Code 13.41.1

Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works DSR Code 13.50.3

Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel work (second coat) DSR Code 13.50.4

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. DSR Code 13.62.1

French spirit polishing :Two or more coats on new works including a coat of wood filler DSR Code 13.68.1

Polishing on wood work with ready mixed wax polish of approved brand and manufacture : New work DSR Code 13.69.1

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. DSR Code 13.80

Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour. Old work (one or more coats) DSR Code 13.81.1

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. One coat DSR Code 13.82.1

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two coat DSR Code 13.82.2

White washing with lime to give an even shade : Old work (two or more coats) DSR Code 13.87.1

White washing with lime to give an even shade : Old work (one or more coats) DSR Code 13.87.2

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work DSR Code 13.99.1

Polishing on wood work with ready made wax polish of approved brand and manufacture :Old work DSR Code 13.104.1

Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface. DSR Code 13.111.1

Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (One or more coat applied @ 0.90 ltr/10 sqm). DSR Code 13.111.2

Refixing old glass panes with putty and nails. DSR Code 14.10

Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) DSR Code 14.75 A

Cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction cum jetting sewer cleaning machine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled operator, supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of sewer lines. Dechocking and flushing of sewer line from one manhole to another by high pressure jetting system of 2200 PSI for sewer line from 150mm dia upto 300mm DSR Code 14.77

Providing & fixing White vitreous china water closet squatting pan (Indian type) along with "S" or "P" trap including dismantling of old WC seat and "S" or "P" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. DSR Code 14.80.2

Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in-Charge. DSR Code 14.82

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) DSR Code 15.2.1

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. DSR Code 15.3

Demolishing R.B. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- charge. DSR Code 15.4

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar DSR Code 15.7.4

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :Of area 3 sq. metres and below DSR Code 15.12.1

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :Of area beyond 3 sq. metres DSR Code 15.12.2

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm DSR Code 15.23.1

Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: G.S. Sheet DSR Code 15.28.1

Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: Asbestos Cement sheet DSR Code 15.28.2

Dismantling barbed wire or flexible wire rope in fencing including making rolls and stacking within 50 metres lead. DSR Code 15.36

Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. DSR Code 15.52

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. DSR Code 15.56

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. DSR Code 15.60

Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron 'Y' shaped placed 2.4m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately). DSR Code 16.53

Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. 80 mm thick C.C. paver block of M-35 grade with approved colour design and pattern. DSR Code 16.91.2

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall 15 mm nominal dia Pipes DSR Code 18.7.1

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall 20 mm nominal dia Pipes DSR Code 18.7.2

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall 25 mm nominal dia Pipes DSR Code 18.7.3

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall 32 mm nominal dia Pipes DSR Code 18.7.4

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15 mm nominal dia Pipes DSR Code 18.8.1

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal dia Pipes DSR Code 18.8.2

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 25 mm nominal dia Pipes DSR Code 18.8.3

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.External work 15 mm nominal dia Pipes DSR Code 18.9.1w
†

Providing and fixing Chlorinated

慷整⁲楰数⁳潣普牯業杮琠卉㨠ㄠ㔳㈹吠灹⁥ⱁ椠据畬楤杮樠楯瑮湩⁧楷桴猠慥楲杮挠湯潦浲湩⁧潴䤠⁓›㌵㈸‬敬癡湩⁧〱洠慧⁰潦⁲桴牥慭硥慰獮潩Ɱ⠠⥩匠湩汧⁥潳正瑥摥瀠灩獥㜠‵浭搠慩敭整⁲卄⁒潃敤ㄠ⸲ㄴㄮùĊĈ倀潲楶楤杮愠摮映硩湩⁧湯眠污慦散甠灮慬瑳捩獩摥删杩摩倠䍖爠楡慷整⁲楰数⁳潣普牯業杮琠卉㨠ㄠ㔳㈹吠灹⁥ⱁ椠据畬楤杮樠楯瑮湩⁧楷桴猠慥楲杮挠湯潦浲湩⁧潴䤠⁓›㌵㈸‬敬癡湩⁧〱洠慧⁰潦⁲桴牥慭硥慰獮潩Ɱ⠠⥩匠湩汧⁥潳正瑥摥瀠灩獥ㄠ〱洠楤浡瑥牥䐠剓䌠摯⁥㈱㐮⸱免ᰀ搀ࠃ
牐癯摩湩⁧湡⁤楦楸杮愠畬業楮浵眠牯潦⁲潤牯ⱳ眠湩潤獷‬敶瑮汩瑡牯⁳湡⁤慰瑲瑩潩獮眠瑩⁨硥牴摵摥戠極瑬甠⁰瑳湡慤摲琠扵汵牡猠捥楴湯⽳愠灰潲牰慩整娠猠捥楴湯⁳湡⁤瑯敨⁲敳瑣潩獮漠⁦灡牰癯摥洠歡⁥潣普牯業杮琠卉›㌷″湡⁤卉›㈱㔸‬楦楸杮眠瑩⁨慤桳映獡整敮獲漠⁦敲畱物摥搠慩愠摮猠穩ⱥ椠据畬楤杮渠捥獥慳祲映汩楬杮甠⁰桴⁥慧獰愠⁴番据楴湯ⱳ椠攮‮瑡琠灯‬潢瑴浯愠摮猠摩獥眠瑩⁨敲畱物摥䔠䑐⁍畲扢牥 敮灯敲敮朠獡敫⁴瑥⹣䄠畬業楮浵猠捥楴湯⁳桳污敢猠潭瑯ⱨ爠獵⁴牦敥‬瑳慲杩瑨‬業牴摥愠摮樠楯瑮摥洠捥慨楮慣汬⁹桷牥癥牥爠煥極敲⁤湩汣摵湩⁧汣慥⁴湡汧ⱥ䄠畬業楮浵猠慮⁰敢摡湩⁧潦⁲汧穡湩⁧ 慰敮楬杮‬⹃⹐戠慲獳⼠猠慴湩敬獳猠整汥猠牣睥ⱳ愠汬挠浯汰瑥⁥獡瀠牥愠捲楨整瑣牵污搠慲楷杮⁳湡⁤桴⁥楤敲瑣潩獮漠⁦湅楧敮牥椭⵮档牡敧‮䜨慬楺杮‬慰敮楬杮愠摮搠獡⁨慦瑳湥牥⁳琠敢瀠楡⁤潦⁲敳慰慲整祬 债睯敤⁲潣瑡摥愠畬業楮浵⠠業楮畭桴捩湫獥⁳景瀠睯敤⁲潣瑡湩⁧〵洠捩潲⥮䐠剓䌠摯⁥ㄲㄮㄮ㈮͓śĈ䘀牯猠畨瑴牥⁳景搠潯獲‬楷摮睯⁳…敶瑮汩瑡牯⁳湩汣摵湩⁧牰癯摩湩⁧湡⁤楦楸杮栠湩敧⽳瀠癩瑯⁳湡⁤慭楫杮瀠潲楶楳湯映牯映硩湩⁧景映瑩楴杮⁳桷牥癥牥爠煥極敲⁤湩汣摵湩⁧桴⁥潣瑳漠⁦偅䵄爠扵敢⁲ 敮灯敲敮朠獡敫⁴敲畱物摥⠠楆瑴湩獧猠慨汬戠⁥慰摩映牯猠灥牡瑡汥⥹‮潐摷牥挠慯整⁤污浵湩畩洨湩浩浵琠楨正敮獳漠⁦潰摷牥挠慯楴杮㔠‰業牣湯 †䐠剓䌠摯⁥ㄲㄮ㈮㈮ňŸĈ倀潲楶楤杮愠摮映硩湩⁧汧穡湩⁧湩愠畬業楮浵搠潯Ⱳ眠湩潤ⱷ瘠湥楴慬潴⁲桳瑵整獲愠摮瀠牡楴楴湯⁳瑥⹣眠瑩⁨偅䵄爠扵敢⁲ 敮灯敲敮朠獡敫⁴瑥⹣挠浯汰瑥⁥獡瀠牥琠敨愠捲楨整瑣牵污搠慲楷杮⁳湡⁤桴⁥楤敲瑣潩獮漠⁦湥楧敮牥椭⵮档牡敧⸠⠠潃瑳漠⁦污浵湩畩湳灡戠慥楤杮猠慨汬戠⁥慰摩椠慢楳⁣瑩浥㨩楗桴映潬瑡朠慬獳瀠湡獥漠⁦⸴‰浭琠楨正敮獳⠠敷杩瑨渠瑯氠獥⁳桴湡ㄠ欰⽧煳⥭††卄⁒潃敤㈠⸱⸳朱ᰁ需ࠀ
牐癯摩湩⁧湡⁤灡汰楹杮瀠慬瑳牥漠⁦慰楲⁳異瑴⁹景㈠洠桴捩湫獥⁳癯牥瀠慬瑳牥摥猠牵慦散琠牰灥牡⁥桴⁥畳晲捡⁥癥湥愠摮猠潭瑯⁨潣灭敬整‮䐠剓䌠摯⁥㌱㈮褶ᰀ礀ࠁ牐癯摩湩⁧湡⁤楦楸杮朠慬楺杮椠污浵湩畩潤牯‬楷摮睯‬敶瑮汩瑡牯猠畨瑴牥⁳湡⁤慰瑲瑩潩獮攠捴‮楷桴䔠䑐⁍畲扢牥⼠渠潥牰湥⁥慧歳瑥攠捴‮潣灭敬整愠⁳数⁲桴⁥牡档瑩捥畴慲牤睡湩獧愠摮琠敨搠物捥楴湯⁳景攠杮湩敥⵲湩挭慨杲⁥‮䌨獯⁴景愠畬業楮浵猠慮⁰敢摡湩⁧桳污敢瀠楡⁤湩戠獡捩椠整⥭场瑩⁨汦慯⁴汧獡⁳慰敮⁳景㔠洠桴捩湫獥⁳眨楥桧⁴潮⁴敬獳琠慨㈱㔮‰杫猯浱 䐠剓䌠摯⁥ㄲ㌮㈮椊ᰁ砀ᬁ윀ࠀ畓灰祬湩⁧湡⁤牤睡湩⁧潦汬睯湩⁧″⁸⸲‵煳‮浭猠穩獥漠⁦剆卌倠䍖椠獮汵瑡摥挠灯数⁲潣摮捵潴Ⱳ猠湩汧⁥潣敲挠扡敬椠桴⁥硥獩楴杮猠牵慦散 敲散獳摥猠整汥 噐⁃潣摮極⁴獡爠煥極敲⹤†卄⁒潃敤䔠䴦ㄠㄮ⸷㈱눊ᰀ였ᬀ쐀ࠀ畓灰祬湩⁧湡⁤牤睡湩⁧潦汬睯湩⁧″⁸‴煳‮浭猠穩獥漠⁦剆卌倠䍖椠獮汵瑡摥挠灯数⁲潣摮捵潴Ⱳ猠湩汧⁥潣敲挠扡敬椠桴⁥硥獩楴杮猠牵慦散 敲散獳摥猠整汥 噐⁃潣摮極⁴獡爠煥極敲⹤䐠剓䌠摯⁥♅⁍⸱㜱㈮਱¯ÃŹȈ圀物湩⁧潦⁲楬桧⁴潰湩⽴映湡瀠楯瑮 硥慨獵⁴慦潰湩⽴挠污敢汬瀠楯瑮眠瑩⁨⸱‵煳洮剆卌倠䍖椠獮汵瑡摥挠灯数⁲潣摮捵潴⁲楳杮敬挠牯⁥慣汢⁥湩猠牵慦散⼠爠捥獥敳⁤敭楤浵挠慬獳倠䍖挠湯畤瑩‬楷桴洠摯汵牡猠楷捴ⱨ洠摯汵牡瀠慬整‬畳瑩扡敬䜠⁉潢⁸湡⁤慥瑲楨杮琠敨瀠楯瑮眠瑩⁨⸱‵煳洮⹭䘠䱒⁓噐⁃湩畳慬整⁤潣灰牥挠湯畤瑣牯猠湩汧⁥潣敲挠扡敬攠捴愠⁳敲畱物摥⸮片畯⁰⁃卄⁒潃敤䔠䴦ㄠㄮ⸰ਲ਼ťŸÕȈ匀灵汰楹杮愠摮映硩湩⁧潦汬睯湩⁧潭畤慬⁲睳瑩档 潳正瑥漠桴⁥硥獩楴杮洠摯汵牡瀠慬整☠猠楷捴⁨潢⁸湩汣摵湩⁧潣湮捥楴湯⁳畢⁴硥汣摵湩⁧潭畤慬⁲汰瑡⁥瑥⹣愠⁳敲畱物摥‮″楰⼵‶浡⁰潳正瑥漠瑵敬⁴卄⁒潃敤䔠䴦ㄠ㈮⸴਴ÁÔáȈ匀灵汰楹杮愠摮映硩湩⁧景㈠‰浭漠⁦敭楤浵挠慬獳倠䍖挠湯畤瑩愠潬杮眠瑩⁨捡散獳牯敩⁳湩猠牵慦散爯捥獥⁳湩汣摵湩⁧番据楴湯戠硯‬畣瑴湩⁧桴⁥慷汬愠摮洠歡湩⁧潧摯琠敨猠浡⁥湩挠獡⁥景爠捥獥敳⁤潣摮極⁴獡爠煥極敲⹤卄⁒潃敤䔠䴦ㄠ㈮⸱਱ÍàāȈ圀物湩⁧潦⁲楣捲極⽴猠扵慭湩眠物湩⁧污湯⁧楷桴攠牡桴眠物⁥楷桴琠敨映汯潬楷杮猠穩獥漠⁦剆卌倠䍖椠獮汵瑡摥挠灯数⁲潣摮捵潴Ⱳ猠湩汧⁥潣敲挠扡敬椠畳晲捡⽥爠捥獥敳⁤敭楤浵挠慬獳倠䍖挠湯畤瑩愠⁳敲畱物摥㈠堠㘠猠⹱洠‫‱⁘‶煳‮浭攠牡桴眠物⁥卄⁒潃敤䔠䴦ㄠㄮ⸴਴íĀÁȈ匀灵汰楹杮愠摮映硩湩⁧潦汬睯湩⁧慲楴杮‬潤扵敬瀠汯ⱥ㈠〴瘠汯獴‬獩汯瑡牯椠桴⁥硥獩楴杮䴠䉃䐠⁂潣灭敬整眠瑩⁨潣湮捥楴湯ⱳ琠獥楴杮愠摮挠浯業獳潩楮杮攠捴‮獡爠煥極敲⹤㌶愠灭⁳卄⁒潃敤䔠䴦㈠ㄮ⸰਱­ÀÁȈ匀灵汰楹杮愠摮映硩湩⁧潦汬睯湩⁧慲楴杮‬潤扵敬瀠汯ⱥ㈠〴瘠汯獴‬獩汯瑡牯椠桴⁥硥獩楴杮䴠䉃䐠⁂潣灭敬整眠瑩⁨潣湮捥楴湯ⱳ琠獥楴杮愠摮挠浯業獳潩楮杮攠捴‮獡爠煥極敲⹤㌶愠灭⁳卄⁒潃敤䔠䴦㈠ㄮ⸲ਲ­ÀÂȈ匀灵汰楹杮愠摮映硩湩⁧潦汬睯湩⁧慲楴杮‬潤扵敬瀠汯ⱥ㈠〴瘠汯獴‬獩汯瑡牯椠桴⁥硥獩楴杮䴠䉃䐠⁂潣灭敬整眠瑩⁨潣湮捥楴湯ⱳ琠獥楴杮愠摮挠浯業獳潩楮杮攠捴‮獡爠煥極敲⹤㐠‰浡獰䐠剓䌠摯⁥♅⁍⸲㈱ㄮ긊ᰀ섀ᬀ漀ࠁ畓灰祬湩⁧湡⁤楦楸杮映汯潬楷杮眠祡‬潨楲潺瑮污琠灹⁥桴敲⁥潰敬愠摮渠略牴污‬桳敥⁴瑳敥ⱬ䴠䉃搠獩牴扩瑵潩潢牡Ɽ㐠㔱瘠汯獴‬湯猠牵慦散 敲散獳‬潣灭敬整眠瑩⁨楴湮摥挠灯数⁲畢⁳慢Ⱳ渠略牴污戠獵戠牡‬慥瑲⁨慢Ⱳ搠湩戠牡‬湩整捲湯敮瑣潩獮‬潰摷牥瀠楡瑮摥椠据畬楤杮攠牡桴湩⁧瑥⹣愠⁳敲畱物摥‮䈨瑵眠瑩潨瑵䴠䉃刯䍃⽂獉汯瑡牯 ‴慷⁹㐨⬠ㄠ⤲‬潄扵敬搠潯⁲卄⁒潃敤䔠䴦㈠㐮ㄮ尊ᰁ渀ᬁ뤀ࠀ畓灰祬湩⁧湡⁤楦楸杮映汯潬楷杮猠穩⽥洠摯汵獥‬䥇戠硯愠潬杮眠瑩⁨潭畤慬⁲慢敳☠挠癯牥瀠慬整映牯洠摯汵牡猠楷捴敨⁳湩爠捥獥⁳瑥⁣獡爠煥極敲⹤ㄠ漠⁲′潍畤敬⠠㔷浭㝘洵⥭䐠剓䌠摯⁥♅⁍⸱㜲ㄮꔊᰀ렀ᬀ똀ࠀ畓灰祬湩⁧湡⁤楦楸杮映汯潬楷杮猠穩⽥洠摯汵獥‬䥇戠硯愠潬杮眠瑩⁨潭畤慬⁲慢敳☠挠癯牥瀠慬整映牯洠摯汵牡猠楷捴敨⁳湩爠捥獥⁳瑥⁣獡爠煥極敲⹤†″潍畤敬⠠〱洰塭㔷浭 卄⁒潃敤䔠䴦ㄠ㈮⸷ਲ¢µ猀浱&瀀牥戠条漠⁦〵杫挠浥湥⁴獵摥椠桴⁥業ո楌牴ѥ潈牵ԝĈ倀潲楶楤杮愠摮氠祡湩⁧湩整牧污挠浥湥⁴慢敳⁤慷整⁲牰潯楦杮琠敲瑡敭瑮椠据畬楤杮瀠敲慰慲楴湯漠⁦畳晲捡⁥獡爠煥極敲⁤潦⁲牴慥浴湥⁴景爠潯獦‬慢捬湯敩ⱳ琠牥慲散⁳瑥⁣潣獮獩楴杮漠⁦潦汬睯湩⁧灯牥瑡潩獮⠺⥡䄠灰祬湩⁧⁡汳牵祲挠慯⁴景渠慥⁴散敭瑮甠楳杮㈠㜮‵杫猯浱漠⁦散敭瑮愠浤硩摥眠瑩⁨慷整⁲牰潯楦杮挠浯潰湵⁤潣普牯業杮琠卉‮㘲㔴愠摮愠灰潲敶⁤祢䔠杮湩敥⵲湩挭慨杲⁥癯牥琠敨删䍃猠慬⁢湩汣摵湩⁧摡潪湩湩⁧慷汬⁳灵潴㌠〰洠敨杩瑨椠据畬楤杮挠敬湡湩⁧桴⁥畳晲捡⁥敢潦敲琠敲瑡敭瑮⠮⥢䰠祡湩⁧牢捩慢獴眠瑩⁨潭瑲牡甠楳杮戠潲敫牢捩獫戯楲正戠瑡⁳㔲洠潴ㄠ㔱洠楳敺眠瑩⁨〵‥景挠浥湥⁴潭瑲牡ㄠ㔺⠠‱散敭瑮㨠㔠挠慯獲⁥慳摮 摡業數⁤楷桴眠瑡牥瀠潲景湩⁧潣灭畯摮挠湯潦浲湩⁧潴䤠⁓›㘲㔴愠摮愠灰潲敶⁤祢䔠杮湩敥⵲湩挭慨杲⁥癯牥㈠‰浭琠楨正氠祡牥漠⁦散敭瑮洠牯慴⁲景洠硩ㄠ㔺⠠‱散敭瑮㨠‵潣牡敳猠湡⁤ 摡業數⁤楷桴眠瑡牥瀠潲景湩⁧潣灭畯摮挠湯潦浲湩⁧潴䤠⁓›㘲㔴愠摮愠灰潲敶⁤祢䔠杮湩敥⵲湩挭慨杲⁥潴爠煥極敲⁤汳灯⁥湡⁤牴慥楴杮猠浩汩牡祬琠敨愠橤楯楮杮眠污獬甠瑰〳‰浭栠楥桧⁴湩汣摵湩⁧潲湵楤杮漠⁦番据楴湯⁳景眠污獬愠摮猠慬獢⠮⥣䄠瑦牥琠潷搠祡⁳景瀠潲数⁲畣楲杮愠灰祬湩⁧⁡敳潣摮挠慯⁴景挠浥湥⁴汳牵祲甠楳杮㈠㜮‵杫 煳景挠浥湥⁴摡業數⁤楷桴眠瑡牥瀠潲景湩⁧潣灭畯摮挠湯潦浲湩⁧潴䤠⁓›㘲㔴愠摮愠灰潲敶⁤祢䔠杮湩敥⵲湩挭慨杲⹥圠瑩⁨癡牥条⁥桴捩湫獥⁳景ㄠ〲洠湡⁤業楮畭桴捩湫獥⁳瑡欠畨牲⁡獡㘠‵浭‮䐠剓䌠摯⁥㈲㜮ㄮԎ䴀湯桴ͻĈ䌀敬湡湩⁧景甠摮牥朠潲湵⁤畳灭‬癏牥䠠慥⁤⹒⹃⹃吠湡 湩敤数摮湥⁴瑳条湩⥧椠据畬楤杮搠獩潰慳景猠楬⁴湡⁤畲扢獩ⱨ愠汬愠⁳数⁲楤敲瑣潩景䔠杮湩敥⵲湩䌭慨杲⹥吠敨挠敬湡湩⁧桳污潣獮獩⁴映汯潬楷杮漠数慲楴湯㩳‭椨吩湡桳污敢攠灭楴摥漠⁦慷整⁲祢瀠浵楰杮☠戠瑯潴桳污敢挠敬湡摥漠⁦楳瑬愠摮漠桴牥†敤潰楳獴‮椨⥩䔠瑮物⁥畳晲捡⁥牡慥漠⁦桴⁥畳灭猠慨汬琠敨捳畲扢摥琠潨潲杵汨⁹楷桴眠物⁥牢獵⁨瑥⹣愠摮瀠敲獳牵⁥慷桳摥眠瑩⁨慷整⹲椨楩 桃潬楲慮楴湯漠⁦䍒⁃湩整湲污猠牵慦散戠⁹楬畱摩挠汨牯湩⹥椨⥶吠敨琠敲瑡摥猠牵慦散猠慨汬戠⁥牤敩⁤獵湩⁧楡⁲敪瑴湩⁧湡⁤污潬獯⁥慰瑲捩敬⁳桳污敢爠浥癯污映潲桴⁥畳晲捡⹥⠠⥶䘠湩污祬琠敨猠牵慦散猠慨汬戠⁥牴慥整⁤楷桴甠瑬慲楶汯瑥爠摡慩楴湯攠捴‮獡瀠牥搠物捥楴湯漠⁦湅楧敮牥椭⵮桃牡敧‮†††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††卄⁒潃敤ㄠ⸴㠷ͭœĈ倀潲楶楤杮愠摮映硩湩⁧慂汩瀠畬⽧䈠瑯潴汰杵漠⁦敲畱物摥搠慩琠桴⁥潢瑴浯漠⁦楰数愠獳浥汢⁹景琠扵睥汥獡瀠牥䤠㩓㠲〰⠠慰瑲䤠⸩〱‰浭搠慩䐠剓䌠摯⹥㈠⸳㔱ㄮ訠ᰀ缀ࠀ
牐癯摩湩⁧湡⁤汰捡湩⁧湩瀠獯瑩潩楦瑬牥⁳景㐠‰浭搠慩敭整⁲⹇⹉瀠灩⁥楷桴戠慲獳猠牴楡敮⁲景愠灰潲敶⁤畱污瑩⹹†卄⁒潃敤‮㠱㐮瀳∀鄀ࠂ
慅瑲⁨潷歲椠硥慣慶楴湯戠⁹敭档湡捩污d

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall 15 mm dia nominal bore DSR Code 18.10.1

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall 20 mm dia nominal bore DSR Code 18.10.2

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall 25 mm dia nominal bore DSR Code 18.10.3

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall 32 mm dia nominal bore DSR Code 18.10.4

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall 40 mm dia nominal bore DSR Code 18.10.5

Providing and fixing brass bib cock of approved quality : 15 mm nominal bore DSR Code 18.15.1

Providing and fixing brass stop cock of approved quality : 15 mm nominal bore DSR Code 18.16.1

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :15 mm nominal bore DSR Code 18.18.1

Providing and fixing gun metal non- return valve of approved quality (screwed end) : 25 mm nominal bore Horizontal DSR Code 18.19.1.1

Providing and fixing uplasticised PVC connection pipe with brass unions :45 cm length 15 mm nominal bore DSR Code 18.21.2.1

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 100 mm diameter DSR Code 18.22.1

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : 15 mm nominal bore DSR Code 18.46.1

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : 20 mm nominal bore DSR Code 18.46.2

Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 15 mm nominal bore DSR Code 18.47.1

Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 20 mm nominal bore DSR Code 18.47.2

Supply and fixing of Syntex or equivalent make water storage tank including all materials, labours, T&P etc required for proper completion of work. DSR Code. 18.48

Providing and fixing PTMT bib cock of approved quality and colour. 15mm nominal bore, 86 mm long, weighing not less than 88 gms DSR Code 18.54.1

Providing and fixing PTMT bib cock of approved quality and colour. 15 mm nominal bore, 122mm long, weighing not less than 99 gms DSR Code 18.54.2

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore DSR Code 18.49.1

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore DSR Code 18.50.1

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore DSR Code 18.51.1

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore DSR Code 18.52.1

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931. 15mm nominal bore DSR Code 18.53.1

Providing and fixing PTMT stop cock of approved quality and colour. 15 mm nominal bore, 86 mm long, weighing not less than 88 gms DSR Code 18.55.1

Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. With stainless steel cover plate minimum 1.25 mm thickness DSR Code 21.4.1

Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. With brass cover plate minimum 1.25 mm thickness DSR Code 21.4.2