PROVN OF CHAIN LINK FENCE TO F ZONE OR MD ACCN FROM TK CHOWK TO GATE NO 02 OF 7 ARTY BDE AND OTHER SANCTIONED WORKS UNDER GE WEST FEROZEPUR CANTT

Amount

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft and loose soil

M&L for surface dressing n.exc 15 cm deep complete all as specified and directed in soft/loose soil complete all as specified and directed.

Excavation in trenches not exc 1.5m wide & not exc 1.5m in depth for foundation etc or manholes & getting out hard/dense soil complete all as specified.

Excavation in post holes in soft/loose soil (or similar holes) each not exc 0.5 CuM , getting out , returning in filling in ,and removal of surplus soil to a distance not exc 50 M and depositing where directed

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil, complete all as direced by Engr-in-Charge.

ditto all as per above item but exceeding 1.5m and not exceeding 3.00m

M&L for PCC 1:3:6 tye C2 (40 mm graded aggregate) as in foundation,bed to brick drain,mass concrete , surface channel and drains complete all as specified.

M&L PCC 1:2:4 (Type B2) using 40 mm graded stone aggregate as in foundation filling and mass concrete in post holes.

M&L for PCC type D2, 1:4:8 (40 mm graded aggregate) as in foundations, filling and mass concrete, complete all as specified and directed by Engr-in-Charge.

Returing, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soill, complete all as directed by Engr-in-Charge.

Removing excavated material as soil exc. 50 m and n.exc 250 m, depositing where directed at a level n.exc. 1.5m above the starting point, complete all as directed.

Removing excavated material n exc 50 m and depositing where directed at a level n exc 1.5 m above the starting point

M&L for form work to sides and soffits fo roof beams, lintel beams etc. including supports, overhangs, etc. also splays between floors and beams, etc. complete all as directed by Engr-in-Charge.

M&L for RCC , (1: 1.5 :3)type B1 (20 mm graded aggregate) as in lintel beams, roof beams, cantilevers etc. complete all as directed by Engr-in-Charge.

Formwork to soffit of suspended slabs such as roof slabs floor slabs, landings and similar works not exc 200 mm thick (Horizontal or sloping).complete all as directed by Engg-in charge.

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide. complete all as directed by Engg-in charge.

M&L for RCC , (1:1.5 :3) type B1 (20 mm graded aggregate) as in slab supported on walls, beams and columns in roofs etc. complete all as directed by Engr-in-Charge.

M & L Type C2 1:3:6 (40 mm graded aggre-gate) as in foundation filling & mass concrete

M&L Cement concrete Type E2 1:5:10 (40mm graded aggre-gate) in foundations, filling and mass-concrete complete all as specified and directed.

M & L RCC (nominal mix) 1:1.5:3 type A1 (20mm graded aggregate) Columns, pillars, piers, posts and struts complete all as specified and directed

M&L for formwork to sides of pillars, posts, struts, piers, columns and stanchions Square, rectangular surfaces of concrete complete all as directed by Engineer-in-Charge

M&L for form work to sides of concrete foundations, footings, bases of columns and plinth beams and similar work, complete all as directed by Engr-in-Charge.

M&L for RCC (1: 1.5 :3) type B1, (20 mm graded aggregate) as in Foundations, footings, foundation beams; plinth beams; bases for columns, etc.. complete all as directed by Engr-in-Charge.

M&L for form work to chajjas, including edges, complete all as directed by Engr-in-Charge.

M&L for RCC, (1: 1.5 :3 ) type B1 (20 mm graded aggregate) as in chajjas etc. complete all as directed by Engr-in-Charge.

Brick work in cement mortar 1:6 using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6 metre mean radius complete all as specified.

M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 Complete all as specified.

M&L Brickwork with sub-class ‘B’ bricks in brick-on-edge walls (less than ½ brick thick), built in cement mortar 1:4 Complete all as specified.

S&F stucural steel workFe 410 -W (Gde- E- 250) quality- A in tubular / square tube/angles/channels posts/trusses including complete all as specified and directed.

S&F stucural steel work in tubular / square tube trusses including special shaped washer , gusset/ bearing plate etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade ST-240 complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.

All as per item NO:, but 0.80mm thick plain sheet in ridges hips, valley gutters drip and straight flashings (length and girth as fixed) with grade of Zinc coating 275 all as specified and directed.

Supply and fix MS posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting, welding at joints with cleats or riveting, etc., and similar work conforming to Fe 290 Gde E-165

Supply only chain link MS galvanised fencing any size or type or as approved by Engineer in Charge

Fixing only Chain link fencing including line wire any mesh and type to any type of standards, rails, straining bolts etc including provision of binding wire complete all as specified and directed.

S&F mild steel bolts, diameter of neck 12 mm machine made screw bolts not exc 15cm long

S &F Galvanized 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanized mild steel wre, staples or steel pins . etc as directed (each line wire to be measured)

S&F framed work such as grills, gratings etc.. with ends of bars shouldered and or riveted or forged into spikes , framed guard bars ,steel gate, barred iron doors , ladders , framed balusters , walk ways , railings, frame work of water tanks and similar work including necessary welding complete and conforming Fe 290 , Gde -E -165 , complete all as specified and directed

M&L for preparation of new steel surafces of any description not otherwise described , over 10 cm width or girth , priming with a coat of red oxide primer and applyinng 2 coats of synthetic enamel paint of approved shade all as specified and directeed by EIC

M&L for preparation of new steel surafces of any description not otherwise described , not exc 10 cm width or girth , priming with a coat of red oxide primer and applyinng 2 coats of synthetic enamel paint of approved shade all as specified and directeed by EIC

S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, complete all as directed by Engr-in-charge.

S & F mild steel TMT bars 6mm to 8mm dia and over cut to length, bent to shape required including cranking, bending spirally or hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc.

Ditto but 5mm dia and over upto and including 10mm dia in stirrups spacers and binders

M&L for Moorum/red bajri filling in floors or pavings, laid in layeres n.exc. 15 cm thick, spread, levelled and reammed including watering, complete all as directed by Engr-in- Charge.

M&L for Hard core100 mm thick, using broken bricks of guage n.exc. 63mm, deposited, spread and levelled in layeres n.exc. 15 cm thick, watered and rammed to a true surface, as in below sub base, plinth protection and ramp, complete all as directed by Engr-in- Charge.

M&L for PCC 1:2:4 type B1 using 20mm graded aggregate as in lintels Cills,Steps, Plinth courses, Railings, Copings, Bed plates , kerbs etc.inlcuding weathering slightly rounded or champfered angles and throating etc..

M&L for PCC 100 mm thick, type D-2, 1:4:8 (40mm graded aggregate) as in sub-base, complete all as directed.

M&L 75 mm thick PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in sub base complete all as specified.

M&L 50 mm thick PCC, type B-1, 1:2:4 (20mm graded aggregate) as in flooring in , surface finished even and smooth without using extra cement complete all as directed.

M&L for Non skid ceramic coloured (colour & shade as approved) tiles of 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors set and jointed in neat cement slurry over and including 15mm thick screed in cement mortar (1:6) and pointed in white cement with pigment to match the colour of tiles complete all as specified.

M&L for glazed ceramic tiles, coloured (light colour as approved), of size 300x200/ 300x450 of 7mm thick on vertical surfaces such as in skirting/dado etc set and jointed in cement slurry over 15mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified.

M&L for 100mm thick Plain cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in sub base complete all as specified and directed

M&L for fine sand bed under paver block, complete all as directed by Engr-in-charge.

M&L 60mm thick Coloured interlocking (M-35) cement concrete tiles with grey cement and pigment of approved design & pattern as approved by GE. Complete all as speciifed and directed.

Rendering/plastering, 15mm thick in cement mortar (1:4) on any face of brick walls or concrete surfaces, surfaces finished even and smooth without using extra cement complete all as specified.

M&L for external plastering 15mm thick in cm 1:4 on fair faces of brick or concrete, .mixed with water proofing compound, surfaces finished even and fair all as specied by Engineer-in-Charge

M&L for internal plastering 10mm thick in cm 1:6 on fair faces of brick or concrete,surfaces finished even and fair all as specified and directed.

M&L 10 mm thick screed bed or bedding layer of mortar in CM(1:4) with water proofing compound @2% by weight of cement or as per manufacturer instructions will be on surface to have a smooth surface for laying of water proofing membrane. Note: WPC shall be measured and paid separately)

M&L 5mm thick in CM(1:3)cement plastering to ceiling on concrete surfaces finished even and smooth without using extra cement all as specifed and directed.

Supply only water proofing compound.

M&L for Polymer modified bituminous membrane with sand witched polythene film/non woven polyster reinforcement /polymeric water proofing membrane weighing minimum 3Kg/sqm (Make : IWL/STP/ HYPERPLAST or equivalent ) laid after Applying bituminous primer @ 0.30 Kg per Sqm over plastered surfaces of roof including parapet surfaces. (i.e roof slab cleaned throughly to remove all loose particle dust/dirt particle ) membrane shall be laid over entire roof surface and on verticle surface up to grooves ( or as per manufacturers recommendation) with over laps of 100mm The over lap shall be sealed by flames or as per manufacturer instruction.Hot blown bitumen grade 85/25 @1.2kg/Sqm applied over the membrane should be compatible with membrane all as recommendation manufacturers and all as specified and directed.

M&L for prepration of roof surface and applying two coat of solar reflective bituminous aluminium paint @0.10 Kg/Sqm over bituminious membrane complete all as specified and directed by Engr-in-Charge.

M&L 50mm thick PCC(1:2:4) type B1 (20mm graded stone aggregate as in plinth protection laid in alternative panels finished even and smooth without using extra cement.

M&L for Preparation of newly plastered surfaces Wall surfaces & applying three coats of white wash complete all as specified.

M&L for Preparation of newly plastered surfaces of ceiling & applying three coats of white wash complete all as specified.

M&L for Preparation of new plastered surfaces and applying two coats of cement base paint over a coat of primer complete all as specified.

S&F Factory made box type steel ventilator with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on Drawing No CEJZ/TD-06/07 & CEJZ/TD-07/07.

S&F 3mm thick, Figured glass pin head type, with oil putty, in squares n.exc 0.50 Sqm complete all as specified.

S&F Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified.

S&F Wash hand basin, flat back 550x400mm vitreous china (white) including PTMT waste fittings, 32mm bore size PVC waste pipe, angle iron/cast iron brackets of required size complete all as specified and directed.

S&F Vitreous china white squatting pan orrissa pattern of size 580mm x 440 mm with integral foot rests including necessary lime concrete bedding and 100 mm bore cast iron ‘P’ trap with 550 to 600 mm long neck for connecting WC to branch piece with cement joints, complete all as specified.

S&F Vitreous China bowl urinal flat back, size of 465x355x265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, and flush pipe ) including waste pipe 32mm dia bore fixed in repairs complete all as specified and directed.

S&F Soap dish of PTMT fixed to wall with steel screws anf PVC rawl plug complete all as specified.

S&F PVC low level flushing cistern (white) of 10 liters capacity with inlet ball float valve, PVC flush pipe and necessary fixing arrangements and connecting to water pipe and WC etc complete all as specified.

S&F 15mm bore pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe, complete all as specified.

S&F Bib tap of cast copper alloy brass 15mm bore, with crutch or butter fly handle, screwed down, chromium plated, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F PVC connection pipe heavy duty 45cm long with brass nuts, rubber washers for 15mm dia iron pipe,unions stop cocks etc complete all as specified and directed.

S&F 15mm stop cock/angle cock cast copper alloy with crutch or butterflty handle, screwed down screwed for iron pipe or for brass ferrule fancy type chromium plated with fancy shank and cup.

S & F 20 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed in repair complete all as specified.

S&F 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement including jointing to waste pipe complete all as specified and directed.

S&F Brass chromium plated tubular towel rail of PTMT, 60cm long between flanges fixed with wdn/plastic cleats.

S&F Solid PVC door frame of size 50 mm x 47 mm made of 5 mm plain colour PVC sheet reinforced with mild steel square tube complete all as specified in clause 8B.3.1 and shown on page 150 of MES Schedule Part-II (2004).

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supply and fixing in the frame at site as per clause 8 B.2.1 of MES schedule Part-II (2004) complete all as specified. Make: Rajshri or equivalent as approved.

S&F PTMT tower bolts, 200 mm long and fixed with steel screws complete all as specified.

S&F PTMT butt hinge, 100mm long, fixed with steel screws with brass/bronze hinge pin complete all as specified.

S&F PTMT handle 125mm long fixed with steel screws complete all as specified.

S&F Galvanised iron steel water tubing, 15mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors complete all as specified.

S&F Galvanised iron steel water tubing, 20mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors complete all as specified.

S&F 500 litres capacity rotational moulded, triple layer polythene water storage tanks (cylindrical vertical with closed top) hoisting and fixed in position on roof including fittings, complete all as specified.

S&F 20mm bore brass ball valve high pressure with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified.

S&F 110mm bore PVC (SWR) pipe of pressure not less than 4 Kg/Sqcm in single socketed, in any length with rubber ring joints, laid in trenches or in floors (Make : Prince, Kissan, Finolex or equivalent) complete all as specified and directed.

S&F 110mm bore, PVC (SWR) bends any radius complete all as specified.

S&F 110mm bore, PVC (SWR) branch piece, single (single T) equal or unequal with access door complete all as specified.

S&F PVC (SWR) vent cowl, for 110mm bore pipe complete all as specified.

S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed.

S&F 75mm bore, PVC (SWR) bends any radius complete all as specified.

S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty in square n. exc 0.5 Sqm in each pane complete all as specified and as directed.

S&F Vitrified ceramic tiles 10mm thick (Square/rectangular)polished area of each tiles exc 0.36Sqm and not exceeding 0.42Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured (Light Shade)cement to match over 20 mm thick screed bed or bedding layer of cement mortar(1:6) for laying floor finishes.

M&L forVirified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:6 complete all as specified.

M&L for light shade Vitrified tile 10mm thick polished, area of tile n exc.0.36 sqm as in Skirting/Dado set and jointed in cement slurry over and including 15mm thick screed in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified.

S&F Vitrified ceramic tiles 10mm thick (Square/rectangular)polished area of each tiles exc 0.36Sqm and not exceeding 0.42Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured (Dark Shade)cement to matchover 20 mm thick screed bed or bedding layer of cement mortar(1:6) for laying floor finishes.

S & F in repair to Hollow PVC wall lining consisting of 5mm thick single side prelam PVC sheet instead of plain colour sheet inclusive of solvent cement and fixing on PVC frame as per specified in MES schedule part-I & II complete all as specified and directed by Engineer in Charge .

S & F in rep of Gypsum Board 8 to 9 mm thick in ceiling fixed with screw 60x60cm placed in ceiling (Angle 25mm X 25mm , Main tee 38mmX23mm ,Sub tee 23mmX23mm) incl aluminium anodised/powder coated snap grid frame 605X605 mm for false ceiling incl hanging arrangement complete all as specified and directed by Engineer in Charge. Note:-The hanging stay wire/rod shall not be less than 4.00mm thick all are included in the above mentioned item only.

S&F Powder coated of ( any colour ) aluminium window , ventilator etc fixed / sliding or pull and push type in shutter frames or shutters with two/three track sliding aluminium frame of Jindal /Hindalco (or) Equivalent make of approved size, including necessary joining cleats, glazing clips,powder coated aluminium snap beading, screws, including necessary anodised aluminium fittings like handle/Tower bolt/hingess etc complete all as specified as per manufacturers instructions. Note: EPDM Rubber beading/gasket measured and paid seperatley.

S&F Powder coated of (any colour) aluminium window grill (decogrill) of any size and weight not less than 3.131 Kg/Sqm fixed type , fixed with powder coated aluminium frame work of with one (or) more rebates including joining cleats and clips for fixing in position as per manufacturer's instruction complete all as specified and directed. Make : Jindal/Hindalco or equivalent.(Frame will be measured and paid separately under item No: 18 above)

S&F 150 mm Floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring complete all as specified and as directed.

S&F 4 lever aluminium mortice lock,vertical type size 100 mm complete.

S&F hydraulically extruded aluminium body door closer regulated designation No 3 universal type suitable for door shutters of 851 to 1000mm in width and weight between 61 to 80 Kg etc complete all as speciified and directed.

S&F 4.8 mm thick sheet glass ordinary quality along with EPDM rubber all around the glass edges exc 0.5 sqm in each pane and fixed into aluminum frame work complete

S&F of 12 mm thick pre laminated particle board, interior grade, pre laminated both sides with decorative choice lamination & other side balancing white lamination, fixed with screws to aluminum/timber frame work complete all as specified and as directed by Engr-in-charge

S&F Solar control film 50 micron reflective type (gareware sun control or equivalent) complete all as specified and directed by Engineer in Charge

M&L Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors as in floor set and jointed in neat cement slurry over and including 15mm thick screed in cement mortar (1:6) and pointed in white cement with pigment to match the colour of tiles complete all as specified.

Material and labour Coloured Cement concrete Chequered tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floorsset jointed and pointed neat cement slurry in floors over complete and laid over 20mm thick screed bed in CM(1:6) all as specified and as directed.

M&L Flush pointing in cement mortar (1:3) to brick walls complete all as specified.

Pre-cast reinforced cement concrete (1:1.5:3),type A1(M20) using 20mm graded stone aggregate as in drain covers and set in cement mortar(1:6) including form work complete all as specified.(Reinforcement measured separately).

Reinforced concrete pipes 300mm bore, class NP3, laid and jointed complete with collars.

Demolition of un-reinforced cement concrete in ground floor and paving not exceeding 15 cm thick (below or above ground level) complete all as specified.

Cement concrete (1:2:4) type B-2 using 40mm graded stone aggregate as in floor topping, 75 mm thick, surface finished even and smooth without using extra cement complete all as specified.

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches pillars etc.., but excluding ashlar facings dressed stone work and precast concrete articles all as directed.

Demolition of concrete in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and directed.

Demolition of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings

Cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in plinth protection, 50mm thick, surfaces finished even and fair without using extra cement as in plinth protection including provision of construction joints complete all as directed by Engr-in-Charge and as specified.(Note : Construction joint will be measured and paid seperately)

Providing precast ce- ment concreteset in CM(1:4) of (1:3:6) using 20mm graded aggregate in win- dow or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin) corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throat- ing etc. and setting in mortar complete with joints to match

M&LGranite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite

M&L point wiring with 1.5 Sqmm FRLS PVC insulated and unsheathed single core cable 1100 Volts grade with stranded copper conductor in and including PVC concealed conduit and conduit accessories along with continuous earth wire 1.5 Sqmm PVC insulated, unsheathed stranded copper conductor cable and connected to common earth dolly, with and including 1.6mm thick cadmium plated sunk MS pressed steel terminal boxes with 3.0 mm thick hylum sheet cover fixed with brass screw complete with all accessories. (a) One light/fan point controlled by one single pole one way switch.

(b) One socket outlet on the same board controlled by one single pole one way switch

(c) One 5 amps socket outlet independent controlled by one single pole 5 Amp switch.

All as per Item No 1 mentioned here-in- before but one three pin 15 Amps switch socket out let on the independent board with 2.5 Sq mm PVC insulated copper conductor and 2.5 Sqmm copper conductor for continuous earthing complete.

Supply & Fixing Switch piano flush type single pole one way 5/6 Amp complete all as directed.

Supply & Fixing Switch piano flush type 15 amps, single pole one way duly ISI marked.

Supply & Fixing Socket outlet 5 pin , 5/6 Amps flush type ISI marked.

Supply & Fixing Socket outlet, 2 in one 6 pin 5 and 15 Amps piano flush type ISI marked.

Supply & Fixing Lamp holder PVC/Polycarbonate,isolated with back plate suitable for batten fittings including with LED lamp 10 watts B22 type.

S & F Ceiling rose surface type, PVC/polycarbonate ,isolated, bakelite 65 x 50mm, 3 terminals ISI marked.

Supply & Fixing step type regulator Piano switch type ( 5 step) for ceiling fan 1200/1400 mm size 230 volts, 6 Amps.

Supply & Fixing sheet metal enclouser double door factory made powder coated out of CRCA mild steel sheet 1.2 mm thick wih metallic painting white series TPN DBs (Vertical type)fitted with ABS frame and 415 volts 200 Amps rated enameled bus bar 4 way dust and vermin proof ssuitable for incorporation of MCBs duly concealed in wall and making good to distrubed surface and colour matching complete all as specified

Supply & Fixing MCCB 100 Amps, 415 volts, 16 KA, 4 Pole complete all as specified.

S&F MCB, Single pole 240 V,6 - 32 Amps 10 KA 'B Series.

Supply & Fixing decorative box type fitting, blue and any coloured end caps, prewired in and including linear LED tubelar lamp 18W with extrated aluminium PC body and PC diffuser complete with all accessories and flexible wire twin core from ceiling rose to terminal block all as specified.

S&F LED Ceiling Light 36 Watt 600x600 mm 240 volts, energy saving complete with all caeessories including diriver, coneection up to the light fitting all as specified and directed.

S & F Ceiling fan 1200 mm sweep 230Volt single phase 5 star complete with all accessories and pre wired and connection up to ceiling rose including stepped socket type electronic regulaor complete all as specified and directed. Make : Crompton/Bajaj/Havells

M & L for sub main wiring with two single core PVC insulated FRLS cable with Copper conductor unsheathed cable of size 2 x 6 sqmm drawn through in and including PVC Concealed with 1 x 6 sqmm PVC insulated copper conductor single core for continuous earthing complete including PVC conduit 25 mm dia ( Note : Two run of single core cable of size 6.0 Sqmm and one run of 6.0 Sqmm single core,one run of PVC conduit shall be measured as single run)

S&F Sheet metal enclosure with socket plug top and MCBs single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of capacity 20 Amps complete all as directed.

Supply & Fixing LED Bldg security light 30 watts with bracket (for housing bldg light fittings) made of GI pipe 25 mm dia light grade suitable size duly cutted and welded at an angle of 120 degree and fixed to wall with bolts,nuts,and washers complete all as specified and directed.

Earthing complete with galvanized steel plate elecrode of size 60 cm x 60cm x 6.0 mm thick burried directly in ground vertically to a depth not less than 2.5 mtr below the ground level with top edge of earth plate at a depth not less than 1.5 mtr below ground level. Earth plate surrounded by 15mm thick packed alternative layers of charcoal dust and comman salt, earth lead GI wire of 4mm dia (8 SWG) by means of bolts , nuts, check nuts and washers of galvanised iron with thimbles. The other end of GI earth wire is connected to main switch board and protected by light grade GI pipe of 15 mm bore. provision of 20mm bore light grade GI pipe for watering including GI funnel and wire mesh. Pipe shall be provided vertically upto top level of earth pit and then taken horrizontally to the earth pit. Cement concrete chamber of PCC ( 1:3:6 ) type C-2 using 40 mm graded stone aggregate.The chamber shall be constructed one metre away from edge of earth pit. 50 mm thick pre cast cover of cement conrete (1:2:4) type B-1 using 20 mm graded stone aggregate, excavation in soft / loose soil, returning filling and removal of surplus soil to a distance of 50 mm as directed and shown in Electrical Plate No- 3 of SSR Part-1 (2010)

M&L cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cables (Heavy duty) 1100 volts grade with stranded aluminium conductor of size 25 Sqmm 4 core.

M&L for sand filling under floors, foundation or cable protection including spreding leveling in layer not exc 25cm thick.

M & L sub class B bricks locally available of size 22x11x7.5 cm laid dry width wise acrose the line of cable in trenches for protection of UG cable

S&F galvanised iron pipe light grade (ISI marked) 40mm bore for passing of cable laid in trenches fixed to walls laid under floors, roads including all fittings i.e MS clamps nuts & bolts etc as required all as specified.

M/s Mukand Lal Khanna

manoj and company

M/s Bansi Lal

M/s Sanjiv Kumar

KAMALJIT SINGH CONTRACTOR

Supreme Constructions

M/S Yashpaul Gulati