REPAIR TO WIRING, REWINDING FANS AND GEYSERS IN TECH AND DOMESTIC AREA IN 3 BRD CAMPUS UNDER GE (AF) MC CHANDIGARH

Amount

Taking down carefully aluminum/copper point wiring (light ,fan, socket any type,switch, power, bell etc. complete including fixtures & fittings (such as ceiling rose, switch socket, Pendent, regulator, light fitting etc) and removing the material from site and making good the disturbed surfaces of walls/ceiling etc as per existing surfaces complete all as directed.

M & L for Concealed Point wiring for One light point/exhaust/ceiling fan/bell controlled by one way switch 6 amp with 1.5 Sqmm (nominal area) single core PVC insulated unsheathed (FRLS) cable, multi-stranded, copper conductor, in universal colour code with & including suitable size of rigid non-metallic PVC conduit (not less then 20mm dia med gd)and its all accessories complete concealed in wall / roof incl cutting & chases and modular flush metal boxes 0.8 mm thick suitable for modular fittings including modular outer cover plate make Legrand (Arteor)/ Schneider (Zencelo) /Anchor (panasonic Thea)/Goldmedal( Nixon Quorra) with inner frame suitable for cover plate as per site requirement for mounting modular switches, sockets, etc including earth wire of PVC insulated (FRLS) copper conductor multistranded of 1.5 Sqmm size in green colour complete including making good(i.e plastering in cement mortar 1:6,one coat of putti and two coats of interior emulsion paint with matching existing surface ) all as specified in current SSR Part-I & II all as directed .

All as per item No 2 here-in-before but for One 3 pin 6 Amps socket point controlled by one switch on same board complete all as specified and directed.

All as per Item No 2 here-in-before but for One 3 pin 6 Amps socket point controlled by one Modular switch on independent board complete all as specified and directed.

All as per item No.2 here-in-before but for 3 pin / 5 pin 16 Amps sockets outlet with 2.5 Sqmm PVC insulated & unsheathed (FRLS) copper conductor cable independent and 2.5 Sqmm PVC insulated & unsheathed (FRLS) copper conductor cable earth wire complete all as specified and as directed.

Supply and Fixing Modular switch 16/20 Amp single pole one way,2 Module with indicator and no top gap between rocker plate and fully shrouded double rocker mechanisam type all the importent parameters like rating etc should be laser printed on every switch along with catoulage number all as specified. Make: Legrand (Arteor) / Schneider (Zencelo) / Anchor(Panasonic Thea)/Goldmedal( Nixon)

Supply and Fixing Modular socket shutter type, 2-in-1,3 and 5 pins 6 /16 Amps, combined 2 Module and no top gap between rocker plate and fully shrouded double rocker mechanism type all the important parameters like rating etc should be laser printed on every switch along with catalogue number complete all as specified. Make: Legrand (Arteor) / Schneider (Zencelo) / Anchor (Panasonic Thea)/Goldmedal( Nixon)

Supply and Fixing Ceiling rose surface bakelite square in shape size 100mm, three terminals complete all as specified.

Supply and Fixing Modular switch 6 Amps single pole one-way, 1 Module and no top gap between rocker plate and fully shrouded double rocker mechanism type all the important parameters like rating etc should be laser printed on every switch along with catalogue number complete all as specified. Make: Legrand (Arteor) / Schneider (Zencelo) / Anchor(Panasonic Thea)/Goldmedal( Nixon)

Supply and Fixing Modular socket shutter type, 2-in-1, 3 pins 6 Amps ,ISI marked, combined 2 Module and no top gap between rocker plate and fully shrouded double rocker mechanisam type all the importent parameters like rating etc should be laser printed on every switch along with catoulage number complete all as specified. Make: Legrand (Arteor) / Schneider (Zencelo) / Anchor(Panasonic Thea)/Goldmedal( Nixon)

Supply & Fixing Modular fan Regulator electronic step type 100 watt ,ISI marked, 2 Module complete all as specified. Make: Legrand (Arteor) / Schneider (Zencelo) / Anchor(Panasonic Thea)/Goldmedal( Nixon)

Supply and fixing picture lights light type LED, 200- 240 Volts, Muziris Picture Light - 12W, 19.6 L x 7.1 W x 3.7 H Centimeters, lighting method Downward bulb base E27, warm/cool/natural as per site requirement , wall mountwith all accessories complete connections all as specified and directed. Make :-Philips/Jaquar/Havells

S&F recess mounting LED 36W 2'x2' tile in CRCA housing with full opal diffuser suitable for Armstrong/Grid ceilings with revolutionary flicker controlled technology to reduce harmful invisible flicker present in LED lighting sources all as specified and directed.

S&F surface mounting LED 36W 2'x2' tile in CRCA housing with full opal diffuser suitable for RCC ceilings with revolutionary flicker controlled technology to reduce harmful invisible flicker present in LED lighting sources all as specified and directed.

Supply and fix Lamp holder, PVC / polycarbonate type with back plate suitable for batten fittings complete all as specified.

Supply and fixing in replacement SPN 40- 63 Amps,' C' series , breaking cap10KA, 240V complete all as specified.

Supply and fixing in replacement of MCB Single pole 6 to 32 Amp, 240V, 10KA, 'B' curve curve with indicator light complete all as specified & directed. Make:- Gold medal/Havells/Legrand

Supply and fix Plexo box ,IP 55 ,3 module with adaptor and PVC membrane ,grey in colour all as specified and directed

Supply and fixing in replacement of MCB DB Single pole and neutral 12 way sheet steel phospehtised powder painted with IP 43 protection 240 V neutral link, earth bar and Din rail double door complete including making good(i.e plastering in cement mortar 1:6,one coat of putti and two coats of interior emulsion paint with matching existing surface ) all as specified and directed. Make: Goldmedal/Legrand/Havells

Supply and fixing in replacement of MCB DB Single pole and neutral 08 way sheet steel phospehtised powder painted with IP 43 protection 240 V neutral link, earth bar and Din rail double door completeincluding making good(i.e plastering in cement mortar 1:6,one coat of putti and two coats of interior emulsion paint with matching existing surface ) all as specified and directed. Make: Goldmedal/Legrand/Havells

Suply and fixing in replacement MCB distribution board, SPN 4 Way, Double door, IP 43 rated, concealed in wall sheet steel, phosphatised, powder painted with Copper bus-bar 100Amp, neutral link, earth bar and din rail , cable ties for cable management, 240 V, completeincluding making good(i.e plastering in cement mortar 1:6,one coat of putti and two coats of interior emulsion paint with matching existing surface ) all as specified. Make : Havells/Legrand/Goldmedal

Material and labour for Concealed Sub Main Wiring with two run single core 2.5 Sqmm (nominal area) multi stranded copper conductor FRLS PVC insulated and unsheathed 1100volts grade colour code cables, drawn on surface in and including UPVC conduit of 25mm dia bore medium grade, including standard fittings such as Tees, junction, bends etc., with and including one run of continuous multi stranded copper conductor 2.5Sqmm (nominal area) FRLS PVC insulated and unsheathed 1100volts grade colour code cable for earth continuity including making good (i.e plastering in cement mortar 1:6,one coat of putti and two coats of interior emulsion paint with matching existing surface ) including taking down old, complete all as specified and directed. Note:- Two run of 2.5Sqmm + One run of 2.5Sqmm for earth wire + one run of UPVC conduit 25 mm dia shall be measured as one RM.

Material and labour for Sub Main Wiring with two run single core 4 Sqmm (nominal area) multi stranded copper conductor FRLS PVC insulated and unsheathed 1100volts grade colour code cables, drawn on surface in and including UPVC conduit of 25mm dia bore medium grade, including standard fittings such as Tees, junction, bends etc., with and including one run of continuous multi stranded copper conductor 4 Sqmm (nominal area) FRLS PVC insulated and unsheathed 1100volts grade colour code cable for earth continuity including making good(i.e plastering in cement mortar 1:6,one coat of putti and two coats of interior emulsion paint with matching existing surface ) including taking down old, complete all as specified and directed. Note:- Two run of 4Sqmm + One run of 4Sqmm for earth wire + one run of UPVC conduit 25 mm dia shall be measured as one RM.

Material and labour for Sub Main Wiring with two run single core 6.0 Sqmm (nominal area) multi stranded copper conductor FRLS PVC insulated and unsheathed 1100 volts grade colour code cables, drawn on surface in and including UPVC conduit of 25mm dia bore medium grade, including standard fittings such as Tees, junction, bends etc., with and including one run of continuous multi stranded copper conductor 6 Sqmm (nominal area) FRLS PVC insulated and unsheathed 1100volts grade colour code cable for earth continuity including making good(i.e plastering in cement mortar 1:6,one coat of putti and two coats of interior emulsion paint with matching existing surface ) including taking down old complete all as specified and directed. Note:- Two run of 6Sqmm + One run of 6Sqmm for earth wire + one run of UPVC conduit 25 mm dia shall be measured as one RM.

Material and labour for Sub Main Wiring with Four run single core 10 Sqmm (nominal area) multi stranded copper conductor FRLS PVC insulated and unsheathed 1100volts grade colour code cables, drawn on surface in and including UPVC conduit of 32 mm dia bore medium grade, including standard fittings such as Tees, junction, bends etc., with and including Two run of continuous multi stranded copper conductor 10Sqmm (nominal area) FRLS PVC insulated and unsheathed 1100volts grade colour code cable for earth continuity including making good(i.e plastering in cement mortar 1:6,one coat of putti and two coats of interior emulsion paint with matching existing surface ) including taking down old, complete all as specified and directed. Note:- Four run of 10 Sqmm + two run of 10 Sqmm for earth wire + one run of UPVC conduit 32 mm dia shall be measured as one RM.

Taking down the complete ceiling fan /exhaust fan/ wall fan of any type/size from different locations for repairs and fixing back after repairs at dismantled locations complete all as specified and directed. (Repairs & spares shall be measured and paid separately under respective item of Sch ‘A’)

M&L for Cutting of all copper coils & taking out burnt/damaged wire from ceiling fan motor of any make and M&L for rewinding of ceiling fans motor of any make with super enameled copper winding wire of appropriate size/ same gauge as original incl packing insulating material, soldering varnishing assembling and testing complete all as specified of the following 1200 mm sweep all as specified and directed .

All as per Item No 27 here-in-before but for 1400 mm sweep

S&F in replacement standard ball bearing of ceiling fans of 1200/1400 mm sweep size suitable for different makes of fans of approved quality including necessary greasing of 1200 mm ceiling fans all as specified and directed .

All as per item No 29 here-in-before but for 1400 mm ceiling fans

S&F in replacement bush gun metal/Spring suitable for ceiling fans 1200/1400 mm sweep/exhaust fan 300 to 400 mm sweep, cabin fan of any make any size complete all as directed at site.

S&F in replacement of old unserviceable armature shaft for ceiling fans of 1200/1400 mm sweep of any make complete all as specified.

S&F in replacement down rod 30 cm long made out of heavy grade M.S pipe with necessary threading at both ends, holes as required matching with existing & painting for size of ceiling fan 1200mm/1400 mm as directed by Engineer-in-Charge

All as per Item No 33 here-in-before but for 60cm long.

All as per Item No 33 here-in-before but for 90cm long.

Supply and fixing in replacement of heavy duty shackle type rubber reel complete with clamps. nut, bolt with split pin and washers complete set of approiate size suitable for ceiling fan complete all as specified & as directed.

S&F in replacement of top and bottom cover of alluminum alloy suitable for ceiling fan of size 1200mm complete all as specified and directed.

S&F in replacement blade made out of aluminium/steel suitable for any make and sweep size with existing colour , set of three for one ceiling fan as directed.

S&F in replacement upper & lower canopy made of good quality PVC of required size complete set for ceiling fan with tightening screws.

S&F in replacement condenser/capacitor 2.15 MFD suitable for 230 volts single phase for ceiling fan/exhaust fan/cabin fan/pedestal fen incl necessary connection complete . Make Asain//Usha/Baja)

All as item No 40 here-in-before but for 3.15 MFD

M&L for painting two coat of synthetic enamel paint by spraying to ceiling fans of any type in MES store yard including preparation to old painted surfaces by filling cavities etc and overhauling by providing correct grade of lubricant oil/wheel bearing grease complete including making/writing of MES No. all as directed by Engineer-in-charge. (Note: Painting of fans shall be completed in MES stores Yard).

S&F in replacement rotor suitable for ceiling fan of capacity 1200 mm sweep complete all as specified and directed.

S&F in replacement stator for copper winding ceiling fan of capacity 1200 mm sweep complete all as specified and directed.

Taking down flameproof/regular wall mounted/Pedestal fan of size 450mm sweep for rewinding with super enamelled copper wire of appropriate guage including repairs of insulating materials such as laminated leathroid paper, sleeves, necessary varnishing with golden colour varnishing, greasing/oiling, repairs of bush and bearing, repairs of missing/worn out spares such as capacitor, wire, nuts, bolts and washers etc and testing after fixing at its position complete all as specified and directed NOTE: Cost of spares such as ball bearings, capacitors etc will be included in the unit quoted rate and nothing extra shall be payable on this account.

Taking down flame proof /regular wall mounted/Pedestal fan of size 600 mm sweep for rewinding with super enamelled copper wire of appropriate guage including repairs of insulating materials such as laminated leathroid paper, sleeves, necessary varnishing with golden colour varnishing, greasing/oiling, repairs of bush and bearing, repairs of missing/worn out spares such as capacitor, wire, nuts, bolts and washers etc and testing after fixing at its position complete all as specified and directed. NOTE: Cost of spares such as ball bearings, capacitors etc will be included in the unit quoted rate and nothing extra shall be payable on this account.

Taking down regular/flame proof exhaust fan of size 380 mm sweep from frame, for rewinding with super enamelled copper wire of appropriate guage including repairs of insulating materials such as laminated leathroid paper, sleeves, necessary varnishing with golden colour varnishing, greasing/oiling, repairs of bush and bearing, repairs of missing/worn out spares such as capacitor, wire, nuts, bolts and washers etc and testing after fixing at its position complete including painting with grey colour synthetic enamelled paint complete all as specified and directed. NOTE: Cost of spares such as ball bearings, capacitors etc will be included in the unit quoted rate and nothing extra shall be payable on this account.

Taking down regular/flame proof exhaust fan of size 450 mm sweep from frame, for rewinding with super enamelled copper wire of appropriate guage including repairs of insulating materials such as laminated leathroid paper, sleeves, necessary varnishing with golden colour varnishing, greasing/oiling, repairs of bush and bearing, repairs of missing/worn out spares such as capacitor, wire, nuts, bolts and washers etc and testing after fixing at its position complete including painting with grey colour synthetic enamelled paint all as directed. NOTE: Cost of spares such as ball bearing, capacitors etc will be included in the unit quoted rate and nothing extra shall be payable on this account.

Taking down regular/flame proof exhaust fan of size 600mm sweep from frame, for rewinding with super enamelled copper wire of appropriate guage including repairs of insulating materials such as laminated leathroid paper, sleeves, necessary varnishing with golden colour varnishing, greasing/oiling, repairs of bush and bearing, repairs of missing/worn out spares such as capacitor, wire, nuts, bolts and washers etc and testing after fixing at its position complete including painting with grey colour synthetic enamelled paint all as directed. NOTE: Cost of spares such as ball bearings, capacitors etc will be included in the unit quoted rate and nothing extra shall be payable on this account.

Taking down exhaust fan of size 900 mm 415 V, 3 Phase, 50 Hz sweep from frame, for rewinding with super enameled copper wire of appropriate guage including repairs of insulating material such as laminated leathroid paper, sleeves, necessary varnishing with golden colour varnishing, greasing/oiling, repairs of bush and bearing, repairs of missing/worn out spares such as capacitor, wire, nuts, bolts and washers etc and testing after fixing at its position complete after painting with grey colour synthetic enamelled paint complete all as specified and directed. Note : Cost of spares such as ball bearings and capacitors will be included in the unit quoted rate and nothing extra shall be payable on this account.

M&L for inspection, checking adjustments and repairs of storage water heater 25/50 ltr capacity of any type any make vertical/ horizontal type which includes the following :- (a) Inspection, taking out of drain plug & dewatering and refixing the same complete all as directed . (b) Checking water tightness of storage tank . (c) Checking stop cocks with outlet/inlet pipe of geysers, pressure reducing valves etc to ensure free movement of water and easy functioning of parts. (d) Inspecting over flow vent pipe connections to ensure water-tightness and proper flow. (e) Checking and correct earth continuity of electrical items. (f) Checking functioning of heating element and correct setting adjustment of thermostat upto 55º C. (g) Adjustment of reducing valves, checking of dead weight type high pressure release valve and visual check of fusible plug for its intactness. (h) The cost of spare parts required for repair & maintenance of geysers covered under this item shall be measured and paid separately under the relevant item. However cost of fuse plug shall be included in the quoted rate.

Supply only thermostat switch for geysers of 25/50 ltrs capacity (ISI marked) complete all as specified and directed.

Supply only indicator lamp for geyser of any type colour green & red complete all as specified and directed.

Supply only safety valve / high pressure valve ISI marked suitable for 25/50 Ltr capacity of geyser complete all as specified and directed.

Supply only heating element, (as per existing) 1.5 KW 230 volts, ISI marked suitable for 25 ltrs geysers of any make complete all as specified and directed.

Supply only heating element, (as per existing) 2 KW 230 volts, ISI marked suitable for 25/35/50 ltrs geysers of any make complete all as specified and directed.

Supply only stainless-steel inner tank of minimum 20 gauge sheet rated pressure not less than 7kg/sqcm suitable for 25 ltrs capacity geysers (wt not less than 3.75 kg) as per sample complete all as specified and directed.

Supply only of stainless-steel inner tank of minimum 20 gauge sheet rated pressure not less than 7 Kg/sqcm suitable for 50 ltrs capacity geysers (wt not less than 5.25 kg) as per sample complete all as specified and directed.

Supply only siphon assembly/Apparatus plate, compatible to existing geyser of cap 25/50 Ltr, with inlet/outlet and thermostat pipe with drain plug, arrangement for holding the element with nuts, bolts and gasket complete all as specified and directed.

Supply only bottom cover of MS sheet 20 gauge suitable for 25 ltrs capacity geysers and providing a coat of red oxide to inner surface and applying one coat of synthetic enamel paint by spray painting to outer surface complete all as specified and directed.

Supply only bottom cover of MS sheet 20 gauge suitable for 50 ltrs capacity geysers and providing a coat of red oxide to inner surface and applying one coat of synthetic enamel paint by spray painting to outer surface complete all as specified and directed.

Supply and fix in repair Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, chromium plated fancy type, screwed both ends for 15mm bore iron pipe or for union, ISI marked, complete all as specified and directed.

Supply and fix in repair PVC connection for hot/ cold water made of double layer nylon braided and fabric at a pressure of 6kg/sq cm at both ends, 450 mm long, heavy duty with CP brass adopters, washers, suitable for 15 mm bore pipe, complete all as specified and as directed.

Supply and fixing in replacement of water storage heater vertical (geyser) with inner Tank Material: Blue Diamond Glass Lined Tank- 2X Corrosion Resistance; Outer Body Material: ABS, Type: Storage ; Capacity: 25 Litres; AC 220-240 Volts, Wattage: 2000 Watts; with auto temperature cutoff, Pressure: 8 Bars ; BEE Rating: 5 Star complete all as specified and directed.

Supply and fixing in replacement of water storage heater vertical (geyser) with inner Tank Material: Blue Diamond Glass Lined Tank- 2X Corrosion Resistance; Outer Body Material: ABS, Type: Storage ; Capacity: 50 Litres; AC 220-240 Volts, Wattage: 2000 Watts; with auto temperature cutoff, Pressure: 8 Bars ; BEE Rating: 5 Star complete all as specified and directed.

Supply and fix in repairs PVC connection for hot/ cold water made of double layer nylon braided and fabric at a pressure of 6kg/sq cm at both ends, duty with CP brass adopters, washers, suitable for 15 mm bore pipe of 600 mm length complete all as specified and as directed.

All as per item No 66 here-in-before but for 900 mm

Supply and fixing in repair glass wool for geysers complete all as specified and as directed.

Supply only outer body of MS sheet not less than 20 gauge painted with white synthetic enameled paint suitable for 25 ltr geyser complete all as specified and directed.

Supply only outer body of MS sheet not less than 20 gauge painted with white synthetic enameled paint suitable for 50 ltr geyser complete all as specified and directed.

Taking down geysers of any type and any capacity due to rusting of bolts/seepage of wall and re-installation after painting the entire surface with one coat white synthetic enamel paint complete at any location including S&F in repair of heavy duty pin type fastener 4 inch long and making necessary electric & water supply (inlet & outlet) connections from existing source to geyser complete all as specified and directed

S&F in replacement stainless steel Non Return Valve (NRV) 15 mm dia complete all as specified and directed.

Material and labour in replacement white Modular plate with inner PVC Frame of any module with GI Sheet sunken box of same module all as specified and directed . Make Legrand (Arteor)/ Schneider (Zencelo) /Anchor (panasonic Thea)/Goldmedal( Nixon Quorra)

Supply and fixing in replacement 415V 10KA 'C' curve miniature circuit breaker (MCB) of 63-100 Amps TP in the DB complete with connection testing and commissioning all as specified and directed.

Supply and fixing in replacement of sheet metal enclosure double door vertical TPN 4 way with MCCB as incomer with 250 Amp rated bus bar IP 43 protection, cement spill protector, door earthing including MCCB TPN 160 Amp 16 KA as incomer -01 Nos complete all as specified and directed. Make :Goldmedal/Legrand/Havells

S&F in replacement of sheet metal enclosure double door vertical TPN 6 way with MCCB as incomer with 250 Amp rated bus bar IP 43 protection, cement spill protector, door earthing including MCCB TPN 160 Amp 16 KA as incomer -01 Nos complete all as specified and directed. Make :Goldmedal/Legrand/Havells

S&F in replacement of sheet metal enclosure double door vertical TPN 8 way with MCCB as incomer with 250 Amp rated bus bar IP 43 protection, cement spill protector, door earthing including MCCB TPN 160 Amp 16 KA as incomer -01 Nos complete all as specified and directed. Make :Goldmedal/Legrand/Havells

Supply and fix in repair of exhaust fan 600 mm sweep Mettallic type alongwith louvers complete suitable to work on AC, single phase, 230 Volts, 1400 RPM , 50 Hz supply and including connecting up with three core twisted flexible copper conductor cable of suitable size 0.75 Sqmm complete all as specified and directed.

Supply and fix in repair of wall mounted fan 600 mm sweep Mettallic type complete suitable to work on AC, single phase, 230 Volts, 1400 RPM , 50 Hz supply and including connecting up with three core twisted flexible copper conductor cable of suitable size 0.75 Sqmm complete all as specified and directed.

Supply and fix in repair of Pedestal fan 600 mm sweep Mettallic type complete suitable to work on AC, single phase, 230 Volts, 1400 RPM , 50 Hz supply and including connecting up with three core twisted flexible copper conductor cable of suitable size 0.75 Sqmm complete all as specified and directed.

Supply and fix in repair of exhaust fan 450 mm sweep Mettallic type alongwith louvers complete suitable to work on AC, single phase, 230 Volts, 1400 RPM , 50 Hz supply and including connecting up with three core twisted flexible copper conductor cable of suitable size 0.75 Sqmm complete all as specified and directed.

Supply and fix in repair of wall mounted fan 450 mm sweep Mettallic type complete suitable to work on AC, single phase, 230 Volts, 1400 RPM , 50 Hz supply and including connecting up with three core twisted flexible copper conductor cable of suitable size 0.75 Sqmm complete all as specified and directed.

Supply and fix in repair of exhaust fan 300mm sweep Mettallic type alongwith louvers complete suitable to work on AC, single phase, 230 Volts, 1400 RPM , 50 Hz supply and including connecting up with three core twisted flexible copper conductor cable of suitable size 0.75 Sqmm complete all as specified and directed.

Supply and fix in repair exhaust fan 250mm sweep non metallic type alongwith louvers / front grill complete suitable to work on AC, single phase, 230 Volts, 1350 RPM, 50 Hz supply and including connecting up with three core twisted flexible copper conductor cable of suitable size 0.75 Sqmm complete all as specified and directed.

Supply and fix in repair exhaust fan 200mm sweep non metallic type alongwith louvers / front grill complete suitable to work on AC, single phase, 230 Volts, 1350 RPM, 50 Hz supply and including connecting up with three core twisted flexible copper conductor cable of suitable size 0.75 Sqmm complete all as specified and directed.

S&F in repairs of louvers suitable for exhaust fan of size 250/300 mm sweep complete all as directed.

S&F in repairs of louvers suitable for exhaust fan of size 450/600 mm sweep complete all as directed.

Provision of services for maintenance of internal electricity comprising of internal electric wiring, switches, sockets, ceiling rose, regulators, electrical fittings & fixtures,MCB's geyser accesories like heating element, thermostat, taking down and refixing of all type of fans and all other electric work related to buildings all as specified and directed. Notes:- (a) All electric points, fixtures & fittings and all other connected electric components should be checked and defective parts to be rectified/replaced/made serviceable. (b) Defective spares will be measured and paid separately. (c) The contractor should employ two electricians and two helpers for carrying out day to day maintenance in General Shift from 0900 hrs to 1700 hrs for technical and domestic area of 3 BRD. (d) T&P items and testing lamp shall be provided by the Contractor at his own cost. (e) Any spare required for rectification/replacement will be paid under relevent item. (f) The Contractor or his authorized representative (with mobile phone) shall remain in the complaints cell for collection of complaint slip from JE E/M. (g) All complaints slip shall be returned by the contractor in the complaints cells of GE (AF) MC Chd located in Technical/domestic area on same day to the JE E/M or his representive after necessary repair/replacement have been carried out and signature of the user on the complaint slip. (h) It is responsibility of the contractor for rectification of complaint to the entire satisfaction of the user.

Supply only in replacement self adhesive PVC insulation tape, 1.8 cm x 6.5 metre, good quality complete all as specified.

Supply only in replacement ceiling rose surface bakelite 65mm x 50mm three terminals complete all as specified.

Supply only in replacement Modular switch 6 Amps single pole one-way, 1 Module complete all as specified. Make : Anchor Rider/Goldmedal/Legrand.

Supply only in replacement Modular switch 16 Amp single pole one way,1 Module all as specified. Make : Anchor Rider/Goldmedal/Legrand.

Supply only in replacement Bell Multi Music type, 230 Volts complete with connection all as specified & directed.

Supply only in repair 12 inch industrial gong bell for security posts 220-240 Volts AC complete all as specified.

Supply only in replacement Modular fan Regulator electronic step type 100watt , 2 Module complete all as specified. Make : Anchor Rider/Goldmedal/Legrand.

Supply only in replacement Lamp holder, PVC / polycarbonate type with back plate suitable for batten fittings complete all as specified. Make : Anchor /Goldmedal/Legrand.

Supply only in replacement Modular socket 2-in-1, 5 pins 6 Amps , combined 2 Module complete all as specified Make : Anchor Rider/Goldmedal/Legrand.

Supply only in replecement Modular socket 2-in-1,3 and 5 pins 6 /16 Amps, combined 2 Module complete all as specified. Make : Anchor Rider/Goldmedal/Legrand.

Supply only in replacement switch piano flush type 5 Amps single pole one-way, complete all as specified. Make- Anchor/SSK/CONA/Goldmedal

Supply only in replacement switch piano flush type 15 Amp single pole one way, all as specified. Make- Anchor/SSK/CONA/Goldmedal

Supply only in replacement socket outlet flush type 2-in-1, 3 pins 5 Amps multipurpose complete all as specified. Make- Anchor/SSK/CONA/Goldmedal

Supply only in replacement socket outlet flush type 2-in-1,3 and 5 pins 15 Amps multipurpose complete all as specified. Make- Anchor/SSK/CONA/Goldmedal

Supply only in replacement piano fan regulator switch/socket type five step/electronic type as per site requiremnt. Make- Anchor/SSK/CONA/Goldmedal

Supply only in replacement Modular bell Push switch flush type 6 Amps single pole one-way complete all as specified. Make- Anchor Rider/Havells crabtree/ Legrand/ Goldmedal

Supply only in replacement of Recess mounting 18 watt Warm/Cool LED of size 1x1 feet slim ceiling light operating voltage 120V-280V, power factor>0.95, inbuilt Short circuit protection and surge protection, soft and uniform light distribution, system lumen more than 100 lm/Watt Warm/Cool/Natural type complete all as specified and directed.

Supply only in replacement of Recess mounting 18 watt Circle type Warm/Cool LED slim ceiling light operating voltage 120V-280V, power factor>0.95, inbuilt Short circuit protection and surge protection, soft and uniform light distribution, system lumen more than 100 lm/Watt Warm/Cool/Natural type complete all as specified and directed.

Supply only in replacement of Surface mounting 18 watt Circle type Warm/Cool LED slim ceiling light operating voltage 120V-280V, power factor>0.95, inbuilt Short circuit protection and surge protection, soft and uniform light distribution, system lumen more than 100 lm/Watt Warm/Cool/Natural type complete all as specified and directed.

Supply only in replacement of Surface mounting 18 watt Square type Warm/Cool LED of size 1x1 feet slim ceiling light operating voltage 120V-280V, power factor>0.95, inbuilt Short circuit protection and surge protection, soft and uniform light distribution, system lumen more than 100lm/Watt Warm/Cool/Natural type complete all as specified and directed.

Supply only in replacement of Recess mounting 10 watt Warm/Cool LED of size 100 -150mm slim ceiling light operating voltage 120V-280V, power factor>0.95, inbuilt Short circuit protection and surge protection, soft and uniform light distribution, system lumen more than 100lm/Watt Warm/Cool/Natural type complete all as specified and directed.

Supply only in replacement indoor decorative ultra slim surface /Wall mounted T5 LED batten tube light complete fitting 1x 5 watt LED Tube fitting suitable for mirror light with polycarbonate channel housing & integrated electronic driver,energy efficient, 140V-270 volts,warm/cool ,6500K ,>100Lm/Watt complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified.

Supply only in replacement indoor decorative ultra slim surface /Wall mounted T5 LED batten tube light complete fitting 1x 20 watt LED Tube fitting with aluminium channel housing & integrated electronic driver,energy efficient, 140V-270 volts, Warm/natural/cool as per site requirement type, >100 Lm/Watt, complete with all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable of suitable size complete all as specified.

Supply only in replacement indoor decorative ultra slim surface /Wall mounted T5 LED batten tube light complete fitting 1x 10 watt LED Tube fitting with aluminium channel housing & integrated electronic driver,energy efficient, 140V-270 volts, Warm/natural/cool as per site requirement type >100 Lm/Watt complete with all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable of suitable size complete all as specified.

Supply only in replacement environmental friendly, ultra modern, energy saving, surface mounted, decorative hexagon bulk head back-lit LED luminaire comprising of high brightness LEDs lamp of 7 Watt complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable with suitable size of complete all as specified and as directed.

Supply only in replacement of MCB TP 415 Volts 63-100 Amps, C Curve with breaking capacity 10 KA, 50 Hz complete all as specified

Supply only in replacement of MCB TPN 415 Volts 63-100 Amps, C Curve with breaking capacity 10 KA, 50 Hz complete all as specified.

Supply only in replacement of metal enclousre with connecting accessories for fixing MCCB upto 630 Amp 4 pole 415 Volts complete all as specified annd directed.

Supply only in replacement MCB SP 6 - 32 Amps, ' B' series ,breaking cap10KA complete all as specified.

Supply only in replacement SPN 40- 63 Amps,' C' series , breaking cap10KA, 240V complete all as specified.

Supply only in replacement SP enclosure with a two pin and earth plug and socket complete including with SP MCB of rating 20 Amps, 240 Volts complete with all connection as directed.

Supply only PVC Gang Box,any module suitable for Socket and switches all as specified and directed . Note-Module way(2,3,4,6,8 etc ) will be decided as per ground requirement .

Supply only in replacement 3 mm thick laminated mica sheet top cover suitable for switch board 3 to 8 switch/socket board complete all as specified.

Supply only in replacement of 3 mm thick laminated mica sheet top cover suitable for switch board 10 to 12 switches/sockets complete all as specified.

Supply only in replacement modular metal flush box 0.8 mm thickness ,any module all as specified and directed .Note-Module way(2,3,4,6,8,12 etc ) will be decided as per ground requirement .

Supply only in replacement modular white cover plate with inner PVC frame, any module all as specified and directed .Note-Module way(2,3,4,6,8,12 etc ) will be decided as per ground requirement .

Supply only in replacement LED Bulb 12 Watt Warm white B 22 base 160-230 Volts complete all as specified.

Supply only in replacement LED Bulb 5 Watt Warm white B 22 base 160-230 Volts complete all as specified.

Supply only in replacement of LED spike light fitting of capacity 10 W voltage range 150-260 Volts, made up of aluminium casting with acrylic diffuser for soft illumination effect, colour temp not exceeding 5200 K with driver and IP 65 rated complete including making connection complete all as specified and directed.

Supply only in replacement of Green/Orange/cool as per requirement LED flood light 50 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and directed.

Supply only in replacement of Warm/Cool as per requirement LED flood light 100 watt 230 V AC with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and directed.

Supply only in replacement of Warm/Cool as per requirement LED flood light 150 watt 230 V AC with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and directed.

Supply only in replacement of Blue/Green/Orange/cool as per requirement LED flood light 10-20 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and directed .

Supply only LED mirror light 6 to 10 Watt 3-in-1 color changing, 100 lumen per Watt 200-240 Volts, metal finish aluminium/Brass as per site requirement complete all as specifed.

Supply only in replacement indoor decorative ultra slim surface /Wall mounted T5 LED 3-in1 colour changing, energy efficient eye friendly , batten tube light complete fitting 1x 20 watt LED Tube fitting with integrated electronic driver,energy efficient, 180V-240 volts, 100 Lm/Watt complete with all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable of suitable size complete all as specified.

Supply only architectural LED circular Torus light 25 Watt,4000 CCT,600 mm dia ,78 mm width ,circular in shape ,low glare light ,suspended from ceiling with mounting kit ,140 Lumens /watt ,extruded aluminium housing all as specified and directed . Make-Havells/Jaguar/Bajaj/Goldmedal

Supply only architectural LED plus shape light 48 Watt,4000 CCT,1040 mm in length,1040 mm width,85 mm width ,plus in shape ,low glare light ,suspended from ceiling with mounting kit ,140 Lumens /watt ,extruded aluminium housing all as specified and directed .Make-Havells/Jaguar/Bajaj/Goldmedal

Supply only architectural LED X shape light 48 Watt,4000 CCT,1040 mm in length,625 mm width,85 mm height ,X in shape ,low glare light ,suspended from ceiling with mounting kit ,140 Lumens /watt ,extruded aluminium housing all as specified and directed .Make-Havells/Jaguar/Bajaj

Supply only architectural LED Y shape light 36 Watt, 4000 CCT, 1033 mm in length, 580 mm width, 85 mm height , Y in shape, low glare light, suspended from ceiling with mounting kit, 140 Lumens /watt, extruded aluminium housing all as specified and directed. Make - Havells/Jaguar/Bajaj

Supply only in repair FRLS PVC insulated unsheathed flexible cord cable copper strainded 1100 volt house wire grade confirm to IS 694/1990, White in colour 0.75 sqmm 3 core complete all as specified and as directed.

Supply only in repair FRLS PVC insulated unsheathed flexible cord cable copper strainded 1100 volt house wire grade confirm to IS 694/1990 , White in colour 0.50 sqmm 3 core complete all as specified and as directed.

Note :- Amount of credit of Rs. 63500.00 for retrieved materials is mentioned in Schedule of Credit of tender documents in pdf form which will be deducted offline while acceptance of tender.

M/s A.S. ENGINEERS (BID ID -3496803)

PARTAP ENGINEERING WORKS (BID ID -3491100)

Jai Maa Electrical Works (BID ID -3503278)

M/s APEX ENTERPRISES (BID ID -3493617)