Loading
Loading…
Loading…
Tender Value
₹2.0 L
EMD Value
₹3,920
Closing Date
9 Jun 2026, 4:00 pm3d left
XEN REW Kathua
xenrew
Constt. of community shed near ram mandir close to the H/O sham lal in village Bolma
2026_RDPR_311450_5
e-NIT No.45/REW/K of 2026-27 Dated 03/06/2026 2nd call
Open Tender
Civil Works
30 days
Marheen
sbd
2 documents required · 2 mandatory
₹500
Rural Development and Panchayati Raj
₹3,920
3 Jun 2026
3 Jun 2026
10 Jun 2026
3 Jun 2026
9 Jun 2026
3 Jun 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Earth work in excavation in trenches by manual means for foundations, drains, pipes, cables etc. (Not exceeding 1.5 mtr in width) and for shafts, wells, cesspits and the like not exceeding 10sqm on plan, depth upto 1.5mtr. including disposal of excavated earth including all leads, lifts | 2.7 | m3 | 479.3 | ₹1,294.11 |
| 2 | Providing and laying in position cement concrete of specified grade inculding curing but excluding the cost of centring and shuttering- All work upto plinth level in 1:5:10(1 cement:5 coarse sand:10 garded stone ) 20 mm nominal size | 0.36 | m3 | 2,150 | ₹774 |
| 3 | Providing and laying in position cement concrete of specified grade inculding curing but excluding the cost of centring and shuttering- All work upto plinth level in 1:3:6(1 cement:3 coarse sand:6 garded stone ) 20 mm nominal size with 20% boulders | 2.9 | m3 | 5,733.6 | ₹16,627.44 |
| 4 | Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 121 | sqm | 706.5 | ₹85,486.5 |
| 5 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes 10 | 510 | kg | 171 | ₹87,210 |
| 6 | Sand bajri within average lead of 8 km mt | 3.77 | m3 | 247.72 | ₹933.9 |
| 7 | Add cost of inaguration plate | 1 | no. | 4,000 | ₹4,000 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 7.98 MB
BOQ_1008486.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid