PROVIDING AND FIXING OF PREMIUM OPEN GYM AT ANSAL PRADHAN ENCLAVE , G3 GULMOHAR MAJOR SHAHEED PARK AND AYKAR COLONY PARK AND OTHER PLACES WARD 50 ZONE 10

Amount

PROVIDING AND FIXING OF PREMIUM OPEN GYM AT ANSAL PRADHAN ENCLAVE , G3 GULMOHAR MAJOR SHAHEED PARK AND AYKAR COLONY PARK AND OTHER PLACES WARD 50 ZONE 10

3000015532-Premium Adults Air Walker Technical Spec PremiuPremium Adults Air Walker Technical Specifications · Length: - 2200mm x Width: - 2100mm x Height: -1430mm, Safe Area: - 2.0meter x 1.8meter. · Premium Adults Air Walker equipment made up of ‘’B’’ class GI pipe of different NB. NB stands for Nominal boar size i.e. internal diameter of pipe in millimeters. * Make of GI Pipe will be of Tata, Jindal, and Swastik. * The main frame structure pipe is 80 NB for Both Side in Arch Shape. *Center Handle frame is made up of 25 NB. * Footrest GI. Pipe is 40NB. * Especially Design Profiles is cuts with plasma cutting. * The pins used are made up of N 8 material ø 25mm., to build bushes are used are seamless pipe of 60mm OD & 6mm thickness. * Prime stand supporting bush Dia. 125 NB. *Main Paddle support bearing bush made of G.I 125NB. * Instruction board- Support structure is made up of 1.8 mm thickness MS plate. * Peddle Movement restricted by specially designed mechanism (Interlocking). * Instruction sticker Printed on PETG sheet with UV resistance. * The footrest made from aluminum casting material & Size is 125 x 305 x 5mm with the support of 250mm x 115mm x 3mm thickness MS plate. * The foundation for fixing is structure and made form center pipe of G.I. of 80 NB with 40mm x 20mm x 3mm thickness pipe also used. Main pipe supported with 25mm x 25mm MS angle of 3mm thickness. * Base plate are made up of MS round plate ø250. * Foundation Covering Cap is made up of FRP/Roto material of Dia. 295mm. * High tensile steel with galvanized nuts & bolts are used for assembly. * The bearing are used ‘‘6205’’ permanent lubricated bearings & the bearings are used reputed brand (SKF/FAG). * Locking the circlips A24 used for assembly. * The powder coating is done with pure polyester powder of Ackzonoble or Berger with 60 to70 micron thickness.

3000015533-Premium Adults Big Turning Wheel Technic Premium Adults Big Turning Wheel Technical Specifications · Length: - 1450mm x Width: - 1930mm x Height: -2230mm. * Safe Area: - 1.9 x 1.9 meter. · Premium Adults Big Turning Wheel made up of "B" class GI pipe of different NB. NB stands for Nominal boar size i.e. internal diameter of pipe in millimeters. * Make of GI Pipe will be of Tata, Jindal, and Swastik. * The main frame structure pipe is 80 NB for Both sides in curve shape. * The ring frame Size is 25 NB made from "B" class of G.I. pipe. * Big Ring 2 Nos Connection link is 25 NB made up of "B" class of G.I. pipe. * Wheel connecting pipe is 32 NB made of "B" class of G.I. pipe. * The nitrogen hardness pins used are made up of N 8 ø 25mm. * Especially Design Profiles is cuts with plasma cutting. * To build bushes are used are seamless pipe of 60mm OD & 6mm thickness. * The foundation for fixing is structure and made form center pipe of G.I. of 80 NB with 40mm x 20mm x 3mm thick pipe also used. Main pipe supported with 25mm x 25mm MS angle of 3mm thickness. * Instruction board- Support structure is made up of 1.8 mm thickness MS plate. * Instruction sticker Printed on PETG sheet with UV resistance. * Base plates are made up of MS round plate ø250. * End Caps in SS Material are used to cover the bushes. * High tensile steel with galvanized nuts & bolts are used for assembly. * The bearings are used "6205" permanent lubricated bearings the bearings are used reputed brand (SKF/FAG). * The circlips A24 used for assembly. * The powder coating is done with pure polyester powder of Ackzonoble or Berger with 60 to70 micron thickness.

3000015534-Premium Adults Surf Board Technical Spec Premium Adults Surf Board Technical Specifications · Length: - 2300mm x Width: - 3300mm x Height: - 1740mm. * Safe Area: - 1.39 x 1.27 meter · Premium Adult Surf Board equipment made up of ‘’B’’ class GI pipe of different NB. NB stands for Nominal boar size i.e. internal diameter of pipe in millimeters. * Make of GI Pipe will be of Tata, Jindal, and Swastik. * The main frame structure pipe is 80 NB in Arc Shape. * Handle frame is made up of 25NB. * The paddle frame is made up of 32NB of "B" class of G.I. pipe. * The Nitrogen hardness pins used are made up of N 8 ø 35mm., to build bushes are used are seamless pipe of 70mm OD & 6mm thickness. * Prime stand supporting bush Dia. 125NB. * Main Paddle support bearing bush made of G.I 125 NB. * Instruction board- Support structure is made up of 1.8 mm thickness MS plate. * Peddle Movement restricted by specially designed mechanism. * Instruction sticker – Printed on PETG sheet with UV resistance. * Especially Design Profiles is cuts with plasma cutting. * The footrest made from aluminum casting material 350mm x 210mm x 5mm. With the support of 250mm x 150mm x 3mm thick MS plate. * The foundation for fixing is structure and made form center pipe of G.I. of 80 NB with 40mm x 20mm x3mm thick pipe also used. * Main pipe supported with 25mm x 25mm MS angle of 3mm thickness. * Base plates are made up of MS round plate ø250. * Foundation Covering Cap is made up of FRP material of Dia. 295mmHigh tensile steel with galvanized nuts & bolts are used for assembly. * The bearings are used ‘‘6207’’ permanent lubricated bearings. Bearings are used reputed brand (SKF/FAG). * The circlips A34 used for assembly. The powder coating is done with pure polyester powder of Ackzonoble or Berger with 60 to70 micron thickness.

3000015535-Premium Adult Leg Press Double Technical Premium Adult Leg Press Double Technical Specifications · Length: - 2440mm x Width: - 2900mm x Height: - 1600mm. * Safe Area: - 2.8 x 1.4 meter. · Premium Adult Leg Press Double equipment made up of ‘’B’’ class GI pipe of different NB. NB stands for Nominal boar size i.e. internal diameter of pipe in millimeters. * Make of GI Pipe will be of Tata, Jindal, and Swastik. * The main frame structure pipe is 80 NB in Arch Shape. * The outer frame is 25 NB made from "B" class of G.I. pipe. * Footrest on Rest of MS. Square pipe is 50 x 50 mm. * The nitrogen hardness pins used are made up of N 8 ø 35mm. * The seat and back rests are fitted on the outer frame are made up of high quality of fiber plastic material of size 335mm x 310mm x 3mm thickness. * Prime stand supporting bush Dia. 125NB. * Main Paddle support bearing bush made of G.I 125NB, to build bushes are used are seamless pipe of 60mm OD & 6mm thickness. * The footrest made from aluminum casting material 125 x 305 x 5mm thick. With the support of 250mm x 115mm x 3mm thick MS plate. * The footrest frame is made of 25 NB of "B" class of G.I. pipe. * Especially Design Profiles is cuts with plasma cutting. *Instruction board- Support structure is made up of 1.8 mm thick MS plate. * Seat Movement restricted by specially designed mechanism (Interlocking). * Instruction sticker – Printed on PETG sheet with UV resistance. * The foundation for fixing is structure and made form center pipe of G.I. of 80 NB with 40mm x 20mm x3mm thick pipe also used. Main pipe supported with 25mm x 25mm MS angle of 3mm

3000015536-Premium Adult Chest & Seated Press Techn Premium Adult Chest & Seated Press Technical Specification · Length: - 1840mm x Width: - 3260mm x Height: -2400mm, * Safe Area: - 3.0meter x1.7meter · Premium Adult Chest & Seated Press made up of ‘’B’’ class GI pipe of different NB. NB stands for Nominal boar size i.e. internal diameter of pipe in millimeters. * Make of GI Pipe will be of Tata, Jindal, and Swastik. * The main frame structure pipe is 80 for both sides in curve shape. * Handle frame is made up of 32 NB. * The connecting pipe is made of 25 NB. * Prime stand support pipes is made up of 50mm x 50mm sq. pipe with weather proof powder coating. * To build bushes are used are seamless pipe of 60mm OD &6mm thickness. * The foundation for fixing is structure and made form center pipe of G.I. of 80 NB with 40mm x 20mm x3mm thick pipe also used. Main pipe supported with 25mmx 25mm MS angle of 3mm thickness. * Especially Design Profiles is cuts with plasma cutting. * The seat and back rests are fitted on the outer frame are made up of high quality of fiber plastic material of size 335mmx310mmx3mm thickness. * Instruction board- Support structure is made up of 1.8 mm thick MS plate. * Instruction sticker – Printed on PETG sheet with UV resistance. * The nitrogen hardness pins used are made up of N8 ø25mm & ø17mm material. * Base plate are made up of MS round plate ø250. * Bearing Closing SS caps are used to cover the bushes. * Foundation Covering Cap is made up of FRP material of Dia. 295mm. * High tensile steel with galvanized nuts & bolts are used for assembly. * The bearing are used ‘‘6205’’& ‘‘6203’’ permanent lubricated bearings. Bearings are used reputed brand (SKF/FAG). * The cerclips A24 & A16 used for assembly. * The powder coating is done with pure polyester powder of

3000015537-Premium Adult Twister of Seat & Stand Po Premium Adult Twister of Seat & Stand Position Technical Specification · Length: - 2860mm x Width: - 2860mm x Height: -1290mm. * Safe Area: -3 x 3 meter · Premium Adult Twister of Seat & Stand Position made up of ‘’B’ class GI pipe of 65NB, 25NB & 80NB. * Make of GI Pipe will be of Tata, Jindal, and Swastik. * The main frame pipe is 80 NB. * The ring frame is 25 NB made from "B" class of G.I. pipe. * Connection link is made up of 25 NB & of "B" class of G.I. pipe. * The nitrogen hardness pins used are made up of N8 ø30mm. * To build bushes are used are seamless pipe of 70mm OD & 6mm thickness. * The footrest frame is made of 32 NB of "B" class of G.I. pipe. * The supporting frame is made of 25 NB of "B" class of G.I. pipe. * The twister plate is fitted on the supporting frame is made up of 65 NB G.I. Pipe. Ø300mm x8mm thickness M.S. round plate &for supporting plate is ø150mm x8mm thick. * Especially Design Profiles is cuts with plasma cutting. * The foundation for fixing is structure and made form center pipe of G.I. of 89 NB with 40mm x 20mm x3mm thick pipe also used. Main pipe supported with 25mmx 25mm MS angle of 3mm thickness. * Instruction board- Support structure is made up of 1.8 mm thick MS plate. * Instruction sticker – Printed on PETG sheet with UV resistance. * Base plates are made up of MS round plate ø250. * Foundation Covering Cap is made up of FRP material of Dia. 295mm. * High tensile steel with galvanized nuts & bolts are used for assembly. * The bearings are used ‘‘30206’’ permanent lubricated bearing & also "6206" is used. * The circlips A29 used for assembly. The powder coating is done with pure polyester powder of Ackzonoble or Berger with 60 to70 micron thickness.

Khalsa Exports Private Limited

ABDUL ATIQUE