Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹26.8 LAccepted-AOC KALIBARI ROAD TINSUKIA TINSUKIA ASSAM 786171 | TINSUKIA | ASSAM | 786171 | L1 | Accepted-AOC DUE TO L1 RATE | |
| 2 | L2₹28.5 L+₹1.6 L (5.81%)Rejected-Finance MILLONALLY LANE 3 POST TINSUKIA ASSAM PIN 786125 | TINSUKIA | TINSUKIA | ASSAM | 786125 | L2 | Rejected-Finance BEING OTHER THAN L1 BIDDER |
Tender Value
₹26.4 L
EMD Value
₹52,800
Closing Date
10 Jul 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE LEKHAPANI
TINSUKIA ASSAM
PROVN OF COVERED SHED AND HARD STANDING DEFICIENT ELECTRIC GEYSER AND EXHAUST FAN AND STORAGE ACCN AT LEKHAPANI UNDER GE LEKHAPANI
2024_MES_658005_1
8795/E8
Open Tender
Miscellaneous Works
Item Rate
180 days
GE LEKHAPANI
Class D and category a (i) and b(i)
9 documents required · 9 mandatory
₹500
Yes
GE LEKHAPANI
₹52,800
Yes
31 Aug 2024
6 Jun 2024
15 Jul 2024
6 Jun 2024
10 Jul 2024
21 Jun 2024
Amount
Surface excavation 30cm deep and getting out in soft/loose soil complete all as specified and directed.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth for foundation / taking up / laying of UG cable / pole and stay foundation and getting out soft loose soil complete all as specified and directed.
Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, getting out in soft / loose soil complete all as specified and directed
Material & Labour for plain cement concrete (1:4:8), type D-2, (using 40mm graded crushed stone aggregates) in foundations, filling, mass concrete etc complete all as specified and directed.
Material & Labour for plain cement concrete (1:2:4), type B-2, (using 40mm graded crushed stone aggregate) in foundations, filling, mass concrete etc complete all as specified and directed.
Supply & Fixing mild Steel work in hollow square/rectangular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S. 4923 -1997 (Reaffirmed 2009) grade Yst.-310 complete all as specified and directed.
Supply & Fixing mild Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S. 4923 -1997 (Reaffirmed 2009) grade Yst.-310 complete all as specified and directed.
S&F for rolled mild steel Plates (plain or chequred) channels, square cut or notched (ordinary and counter sunk) forming holes, with out any attachment conforming to Fe:410-W(Gde-E-250) quality-A complete all as specified and directed.
S&F, Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheets, 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof overing/ cladding to wall, fixed with self tapping screws as specified and directed.
S&F, Pre-painted galvalume aluminum zinc coating GI based Plain steel sheets, 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridge, etc. fixed with self tapping screws complete all as specified & directed.
M&L Preparation of new steel and iron surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paintover a coat of red oxide primer including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified and directed.
Material & Labour for Hardcore of gauge not exceeding 63 mm, of broken stone or boulders deposited,spread and levelled in layers not exceeding 15 cm thick, watered and rolled/rammed to a true surfaces complete all as specified and directed
Material & Labour for Plain cement concrete ( 1:3:6 ), type C-2 (using 40 mm graded crushed stone aggregate), as in sub base of floor complete all as specified and as directed.
Material & Labour for 100 mm thick Plain cement concrete ( 1:2:4 ), type B-2 (using 40 mm graded crushed stone aggregate), as in floor etc complete all as specified and as directed.
Forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound,complete all as specified
M&L for 75 mm thick Cement concrete type C-2, 1:3:6 (using 40 mm graded crushed stone aggregates) as in plinth protection etc, finishing cement concrete surface even and smooth with out using extra cement including making joints with hot bitumastic mix in proportion of bitumen and sand 1:2 complete as specified & directed.
Returning filling in including spreading, levelling, watering and well ramming in layers n.exc 25cm of soft loose soil complete all as dirceted.
Removing excavated soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.
Providing and laying 80 mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design and pattern as in footpath, parks, lawns, drive ways or light traffic parking etc. of required strength, thickness & size /shape, made by table vibratory method using PU mould , laid in required colour & pattern over and including 50mm thick compected bed of course sand, compacting and proper embedding/ laying of interlocking paver blocks into the sand bedding layers through vibratory compaction by using palte vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern finishing and sweeping extra sand complete.
M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and directd.
M&L for rendering 15mm thick in CM 1:4 in brick/concrete surfaces, finished even and smooth without using extra cement complete all as speciified and as directed.
M&L for Providing, cement concrete type B-1, 1:2:4 (using 20mm graded crushed stone aggegate) in kerbs,stops, rounded or chamfered on edges of carriageway including necessary formwork complete all as specified & as directed.
M&L for Prepration of newly plastered surface of wall and applying two coat of cement base paint over a coat of primer including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified and directed.
M&L for providing reinforced cement concrete M-25 (Design Mix) using 20mm nominal size graded crushed stone aggregate as in foundations, including rafts,footings,foundation beams,plinth beams;bases for columns,etc;basement slabs,under-reamed piles and mass concrete comlpete all as specified and directed.
M&L for providing reinforced cement concrete M-25 (Design Mix) using 20mm nominal size graded crushed stone aggregate as in columns, pillars,piers,posts and struts etc. complete all as specified and directed.
M&L for providing reinforced cement concrete M-25 (Design Mix) using 20mm nominal size graded crushed stone aggregate as in beams, cantilevers, bressumers,lintels over 1.5m span etc.complete all as specified and directed.
M&L for providing reinforced cement concrete M-25 (Design Mix) using 20mm nominal size graded crushed stone aggregate as in chajjas comlpete all as specified and directed.
M&L for providing reinforced cement concrete M-25 (Design Mix) using 20mm nominal size graded crushed stone aggregate as in slabs supported on walls, beams and columns in floors, roofs,landings, balconies, canopies, deck slabs and in shelves and the like comlpete all as specified and directed.
M&L for use and waste of formwork to sides of concrete foundation, footings, base of coloumns, raft beams, sides and soffits (if any) of foundation and plinth beams and similar work vertical or to batter for rough finished flat surfaces of concrete complete all as specified and as directed.
M&L for use and waste of formwork to sides of pillars, posts, struts, piers, coloumns and stanchions for rough finished flat surfaces of concrete complete all as specified and as directed.
M&L for use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels. Cantilevers, shelves including supports, overhangs, etc also splays between floor and beam etc for rough finished flat surfaces of cocrete complete all as specified and as directed.
M&L for use and waste of formwork to chullah hoods, chajjas, troughs and similar items including edges for rough finished flat surfaces of concrete complete all as specified and as directed.
M&L for use and waste of formwork to soffits of suspended slabs such as roof slabs, landings and similar work not exc 200mm thick (Horixontal or sloping) for rough finished flat surfaces of concrete complete all as specified and as directed and as specified.
M&L for Antitermite treatmanet treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as speciifed and as directed
M&L Antitermite treatmanet Treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified and as dirceted.
M&L TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all asspecified and as directed.
All as per Item 36.00 above, but for 6 to 8mm dia complete all as dirceted.
All as per Item No 36.00 above, but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and as directed.
M&L for rendering 10.mm thick plaster in cm 1:6 on fair faces of brick work or concrete surfaces including finishing top even and smooth without using extra cement complete all as specified & directed.
M&L for plastering 5mm thick on fair faces of brick work or concrete surface on ceiling in cement mortar 1:3 finished even and smooth without using extra cement complete all as specified and as directed.
M&L for plastering 10 mm thick on concrete surface in cement mortar 1:3 mixed with WPC of Pidilite 101 using @ 200 ML per 50 Kg of cement finished even and smooth without using extra cement complete all as specified and as directed.
M&L for preparation of new plastered surfaces of wall and applying three coat of white wash complete all as specified & directed.
Preparation of newly plastered surfaces on ceilings and applying three coats of white wash complete all as specified and as directed.
M&L for factory made Pressed steel frames (105 x 60mm) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and as directed.
M&L for plain cement concrete (1:3:6), type C-1, (using 20mm graded crushed stone aggregates) as in bed block, blocks for holdfasts, filling in pressed steel door frames , benching slightly rounded or chamfered angles & throating etc including necessary use & waste of form work complete all as specified and directed.
S&F factory made Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified & as dircted.
S&F 30 mm thick, Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides & fixed to chowkats complete all as specified & directed.
S&F 4mm thick sheet glass, ordinary quality and glazing with oil putty in squares n exc 0.5sq. m in each pane complete all as specified and as directed.
S&F framed work such as griils, grating, angle iron door frames etc., with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, laders, framed balusters, walk ways, railings frame work of water tanks and similar work conforming to Fe-290. Gde E-165 complete all as specified & as directed.
S&F 150 mm size, aluminium anodised , barrel tower bolts of extruded section & fixed complete all as specified and as directed.
S&F 250mm length of bolt, aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified & as directed.
S&F 150mm size aluminium handles, cast type, anodized and fixed complete all as specified & as directed.
M&L preparing new wood & wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified and directed.
M&L for 40mm thick PCC ,B1 (1:2:4) (using 20mm graded crushed stone aggregates) in floors, finished even and smooth, using extra cement complete all as specified and directed.
M&L for Glass dividing strips, 3 mm thick 38mm wide and inserted in position, conform to design complete all as specified and directed
Material and labour for Chequered cement concrete tiles cast in rubber moulded glossy finish of approved colour general purpose double layer of size 25cm x 25cm x 22mm thick with mixture of white and grey cement in equal proportions and pigments set and jointed and pointed in neat cement slurry as in floor laid over and including 15mm thick screed bed / bedding of CM (1:6) complete all as specified and as directed
Material and labour for Point wiring with 1.5 Sqmm copper conductor unsheathed, multistranded, PVC insulated, single core cable FRLSH with earth continuity conductor of 1.5 sqmm PVC insulated copper conductor and including concealed type rigid PVC conduit of suitable size but not less than 20mm dia. and all accessories fixed to the surface of the roof/ walls etc for modular box for housing switches etc, including making good all disturbed work to match the existing complete all as specified and as directed for:- (a) One light/Fan point controlled by one, one way switch (b) One socket outlet 3 or 5 Pin, 10 Amp on independent board
All as per item No 57.00 here-in-before but for One socket outlet 3 or 5 Pin, 10 Amp on same board complete all as directed.
All as per Ser item No 57.00 above but with 2.5 sqmm copper cable in and including concealed type rigid PVC conduit complete all as specified and as directed for socket outlet 3 or 6 pin 20 Amps complete all as dirceted.
S&F modular switch 10 Amp one way 1 module 230 V AC complete all as specified and directed.
S&F modular switch 20 Amp one way 1 module 230 V AC complete all as specified and directed.
S&F modular socket outlet 10 Amp intel multi socket for all pins 230 V AC complete all as specified and directed by Engineer-in-charge.
S&F modular socket outlet 20 Amp 2 module and 6/16 Amp heavy duty 230 V AC complete all as specified and directed.
S&F modular ceiling fan regulator, electronic step type, 5 speed AC 230 volts, 2 module complete all as specified and directed.
S&F 3 module PVC Flush Box including white cover plate with frame for fixing of modular switeches/sockets etc. complete all as specified and directed by Engineer-in-charge.
S&F 4 module Metal Flush Box including white cover plate with frame for fixing of modular switeches/sockets etc. complete all as specified and directed.
S&F 6 module PVC Flush Box including white cover plate with frame for fixing of modular switeches/sockets etc. complete all as specified and directed.
S&F 8 module PVC Flush Box including white cover plate with frame for fixing of modular switeches/sockets etc. complete all as specified and directed.
M&L for Point wiring complete as specified with 1100 volt grade 1.5 sq.mm. (nominal area) single core PVC insulated unsheathed cable multi-stranded copper conductor drawn through and including PVC casing and capping of suitable size but not less than 20mm , with all fittings, fixed on wall/ceiling /floor including sunken box suitable for housing modular pattern switches/ sockets/ regulators etc. and duly earthed with same cable as for wiring above but green in colour as continuous earthing wire complete all as specified & directed for (a) One Light / Fan / Eaxhaust Fan point controlled by one, one way switch. (b) One socket outlet 3 pr 5 Pin, 6 amps on independent board.
All as per item No 69.00 here-in-before but for One socket outlet 3 or 5 Pin , 6 Amps on same board complete all as specified & directed.
All as per item No. 69.00 here-in-before but with using 2.5 Sqmm copper cable in and including PVC casing capping for One socket outlet 5/6 Pins 15/16 Amps complete all as specified & directed.
S&F switch paino flush type 6 Amps single pole one way 230 volts AC circuit complete all as specified and directed.
S&F for socket outlet 2 in 1 3 pin 6 Amps flush type 230 volts AC circuit on same board complete all as specified and directed.
S&F switch socket combination 2 in 1 3/5 pin 6 Amps 240 volts flush type multipurpose complete all as specified and as directed.
S&F switch socket combination 2 in 1 5/6 pin, 16 Amps flush type 240 Volts universal complete all as specified and as directed.
S&F ceiling rose, three terminal, PVC/polycarbonate, isolated body, ISI marked complete all as specified and as directed.
S&F LED tube light fitting 4 ft. 1 x 18/20 watt with 230 volts AC, complete with all accessories internally pre-wired and fixed to walls/ceiling with screw including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed.
S&F LED building security light fitting 1 x 35 Watt new generation energy saving and environmental friendly long life LED street light made up of pressure diecast aluminium housing with high power LED as lighting source and lens embedded PC cover having top opening seperate driver compartment with IP65 protection incl mounting bracket of suitable size and connection complete all as specified and directed.
S&F ceiling fans 1200 mm sweep, AC 230 V complete with blades, down rods and connected accessories, Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with (BLDC) brushless direct current motor and connection complete all as specified and directed.
Supply & fix Distribution Board factory made sheet metal enclosure double door distribution board class IP-43 IK 09 with 200 Amp rated copper bus bar 240 Volts 8 way single pole and neutral link complete all as directed by Engineer-in-Charge.
S&F MCB single pole and neutral (SP&N) 32 Amp 240 volts 10 KA 'C' series with all incoming/outgoing connections with proper size lugs, complete all as specified and directed.
S&F MCB single pole (SP) 6 to 32 Amp 240 Volts 10 KA 'C' series with all incoming/outgoing connection with proper size lugs complete all as specified and directed.
S&F Exhaust fans made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, min RPM 1200, Copper winding of sweep 250mm and connecting up including louvers including making necessary opening on stone/brick masonry wall/steel or wooden window of suitable size, finishing it properly and making good with matching colour with the surroundings provision of cable 3 core of of suitable size from ceiling rose to fan complete all as specified and as directed.
Material and labour for earthing complete with galvanized steel earth plate electrode 600mm X 600mm X 6mm buried directly in ground vertically to a depth not less than 2.25 meter below normal ground level (with top edge of earth plate not less than 1.5 meter below ground level) connected to galvanized iron earth lead wire 4mm dia, (main earthing lead ) by means of galvanized bolts, nuts and washers all as shown in electrical plate no 5 of MES Schedule Part-I (1991) with connected to earth test point & to main switch board with & including adequate quantity of charcoal dust and common salt alround earth plate & 15 mm dia GI pipe light grade for earth lead protection pipe for suitable length and GI pipe 20 mm dia light grade for watering pipe with funnel & wire mesh including necessary earth work and PCC (1: 3 : 6) type C-1 for earth pit and 40 mm thick pre-cast RCC cover in 1 : 2 : 4 type B1 with 3 Nos 8 mm dia TMT bars both ways complete all as specified & directed.
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 2 core, complete all as specified & as dirceted.
M&L for brick protection over cables inside the trench by using common burnt clay building bricks,sub-class"B" laid dry and flat and width wise along the axis of the trench complete all as specified and as directed.
M&L for sand cushioning in cable trenches over & under the cables, with river washed coarse sand, as per standard practice with proper compaction complet all as specified and directed. Note ;- (Punned thickness shall be considered for payment).
Supply and laying 40 mm dia GI tubing light grade complete with all fittings (ISI Marked) lain in trenches/fixed on pole/wall complete all as directed.
Boring of holes under road, pavement, hard standing by for passing the cable throgh GI pipe complete all as specified and directed.
Supply , installation, testing and commissioning of electric water heater (Geyser), storage vertical or horizontal type as approved , BEE 5 star rated, 25 litre capacity, 230 volts AC, 50 Hz comprising of high voltage heating element upto 2 KW for instatnt heating, ABS tech / Engineering thermoplastic body or steel/metal body and with steel inner tank with corrosion resistance coating , rust and shock proof with and including provision of Pressure relief valve and grouting bolts suitably flushed to wall or any other surfcae including electric connection with 3 core PVC insulated, sheathed, stranded copper conductor cable / flexiable chord with plug and stainless steel graded hot & cold connection pipes 2 NOs complete all as specified and directed.
S&F Bib taps fancy type cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, suitable for GI pipe of size 15 mm complete all as specified and directed
S&F stop valve/cock fancy type, chromium plated cast coper alloy screw down high pressure with crutches or butterfly handle screwed both ends for iron pipe or for union suitable for GI pipe of size 15 mm bore complete all as specified and directed
S&F Supply and fixing 15 mm bore, medium grade steel water tubing, galvanized, (ISI marked) with all fittings such as bends, elbows, tee, short pieces, diminishing pieces, cap and plugs laid wall and ceiling or laid in floor complete all as specified and directed.
S&F single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one number single pole MCB 20 Amps , 240 Volts complete all as specified and as directed.
M&L for providing concealed sub main wiring with two single core 4.00 Sqmm (nominal area) PVC Insulated FRLSH unsheathed multi stranded copper conductor cable 1100 volts grade drawing through PVC Casing n capping of adequate size as per the direction complete including 4.00 Sqmm PVC insulated unsheathed multi stranded FRLSH single core copper conductor cable for earth wire complete all as specified and directed. Note :- (i) Three runs of single core 4.00 Sqmm multi stranded copper cable and one run of PVC casing n capping shall be measured as one run length (ii) Extra length of cable required for connection to DBs/MCBs shall deem to be included in unit rate quoted by contractor against the item (iii) Earth wire run inside the conduit.
M/S D R GOPE
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .