Karnataka

Active

Works

Buildings

CONSTRUCTION OF SAMUDAYA BHAVAN AT INDIRA NAGAR IN HUBBALLI TALUK, DHARWAD DISTRICT.

Public Works Department

PWD Division Office Dharwada | DHARWAD, Karnataka

Amount: ₹80.5 LCloses: 22 Jul 2026

Tender Value

₹80.5 L

EMD Value

₹1.6 L

Closing Date

22 Jul 2026, 9:30 pm

Tender Inviting Organisation

Name

Public Works Department

Work Description

CONSTRUCTION OF SAMUDAYA BHAVAN AT INDIRA NAGAR IN HUBBALLI TALUK, DHARWAD DISTRICT.

Tender Information

Tender ID

PWD/2025-26/BD/WORK_INDENT29190/CALL-5

Reference Number

PWD/2025-26/BD/WORK_INDENT29190/CALL-5

Tender Type

Open

Product Category

Buildings

Location

PWD Division Office Dharwada

Source Website

Subscribe to view

Documents Required

5 documents required · 5 mandatory

Technical Bid

RequiredB To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e.2021-22 2022-23, 2023-24, 2024-25 & 2025-26 Satisfactorily completed at least 50 Percent of the contract value, as prime contractor at least one similar work such as building work of value not less than Rs. 40.23 Lakhs.

RequiredTo qualify for the award of this contract, each Tenderer in its name should have in the last five years i.e. 2021-22 2022-23, 2023-24, 2024-25 & 2025-26 executed in any one year the following minimum quantities of work 1.Earthwork Excavation/ Subgarde/Embankment-547.39 Cum 2. PCC/RCC/PQC-264.86 Cum 3. TMT Steel -12.05 Tonne 4.Plastering - 588.97Sqm 5. Flooring/Tiles -259.24 Sqm 6. BBM/SSM/ CC-solid block/ similar masonry wall -88.91 Cum

RequiredThe Tenderer should be a PWD Registered Class III & above contractor

RequiredLiquid assets and/or availability of credit facilities of not less than Rs24.14Lakhs Credit lines/letter of credit/ certificates from the banks for meeting the fund requirement etc. LOC should be in prescribed format-2, if not, then the tender will not be accepted.

Required3.2b To qualify for the award of this contract each Tenderer in its name should have in the last five years i.e. 2021-22, 2022-23, 2023-24, 2024-25 & 2025-26 Achieved in at least Two financial years an average Annual financial turnover in all classes of civil engineering construction works only of Rs. of Rs 80.45 Lakhs With UDIN Number

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non- ccessibility of e-Procurement portal due to internet connectivity issues and technical glitches at bidders end.

Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder.

As per Karnataka State Government order No.LD/300/LET/2006 Bangalore Dated 01.01.2007 and Government Letter No.PW/134/BMS/2007 Dated 27.7.2007, a sum amounting to 1%of the bill amount will be deducted towards Construction Labour Welfare fund

The Item Rate quoted shall include the Royalty Charges on construction materials and other taxes as per prevailing Government Orders.

Conditional tenders will not be accepted

All the items in the tender include all lead, lifts, lab our hire charges of machinery curing for concrete works, and all other incidental charges necessary for successful completion of works as per the direction of Engineer - in charge of this work

The Tenderer shall obtain the work done certificate in the prescribed format from the Competent Authority not below the rank of Executive Engineer(District Level Officer)and scan the Original Certificate and attach the scanned file to the Bid

Financial Year will be reckoned as the period between first day of April and Thirty first day of March of succeeding yearboth days inclusive

The Tenderer shall scan the Original Ownership Documents/ Lease/ Hire commitment Agreement for the Machinery and attach the scanned file to the Bid.

The Tenderer shall note that the scanned Documents can also be uploaded in the tasks created under Document/Evidence Required from the Bidder

The Employer reserves the right to Reject any or all Tenders without assigning any reason

The Department is not responsible for any delay in accessing eprocurement portal

Tenderer shall note that the Tenders of those found Eligible as mentioned in Clause 3 - Qualification of the Tenderer in Section 2 : Instructions to Tenderers (ITT), will only be considered for evaluation

To Qualify for award of this contract, each bidder should give all details and documents as per technical and financial bid attached to this tender The bidders shall bear all costs associated with the preparation and submission of each tender, and the employer will in no case be esponsible and liable for those costs.

All materials required for this work shall be procured by the bidder himself and should got tested by the quality control authorities at his own cost before use on the work.

The Defects Liability Period is 01 years (365 Days)

The intending contractors are requested to note that they should abide by the detailed instructions and conditions contained in the standard tender documents KW-3 KPWD and further orders thereon

18%GST shall be paid to the tendered amount separately

The Increase in G.S.T shall not be paid in the extended period of Contract for which the contractor alone is responsible for delay as determined by the authority while granting the extension of time.

Financial turnover of previous years shall be given a weightage of 10% per year to bring them to the price level of the 2026-27 in the Technical Qualification Criteria mentioned in the next section

Successful bidder should produce 5% Security Deposit and difference amount for unbalanced tender

LOC/Letter of Credit should be in prescribed format-2, if not, then the tender will not be accepted

Registration Certificate License Class- III & above

EMD Total Amount Rs 1,61,000/- Part (1) Rs.50,000/- by e-payment in favour of Executive engineer, PWD Division Dharwad & Part(2) of the EMD.Rs.1,11,000/- by BANK GUARNTEE issued by Nationalized/Scheduled Bank. Contractor should upload the scanned Copy of BANK GUARNTEE issued by Nationalized/ Scheduled Bank.

Period of completion 9 months including monsoon

as per this note, each tenderer should demonstrate availability of few key equipments / machinery for execution f the work. However as per Govt circular no GO-FD/AE 263/EXP12-2022 dt 11-05-2022, this clause for owning key equipments for works costing up to Rs.3.00 crores is exempted. However it is obligatory for the contractor to use the following machineries for various activities involved in construction as per Morth pecification.

Any Deviation/Error/mistake found in units of items, they should be read as in the Unified SR 2023-24 and subsequent Corrigendums and the rates shall be quoted accordingly

Terms and conditions as per kw-3

Star Rates are Applicable

Technical Criteria

General

Total value of civl engineering works executed and payments received in the last five years (year-wise)

List of existing commitments and ongoing works

List of works for which tenders already submitted

Banker Details for reference

Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded

Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years

Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

List of Financial Resources with Certificates

Past Experience

3.2 B To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e.2021-22 2022-23, 2023-24, 2024-25 & 2025-26 Satisfactorily completed at least 50 Percent of the contract value, as prime contractor at least one similar work such as building work of value not less than Rs. 40.23 Lakhs.

Work Done Certificate

To qualify for the award of this contract, each Tenderer in its name should have in the last five years i.e. 2021-22 2022-23, 2023-24, 2024-25 & 2025-26 executed in any one year the following minimum quantities of work 1.Earthwork Excavation/ Subgarde/Embankment-547.39 Cum 2. PCC/RCC/PQC-264.86 Cum 3. TMT Steel -12.05 Tonne 4.Plastering - 588.97Sqm 5. Flooring/Tiles -259.24 Sqm 6. BBM/SSM/ CC-solid block/ similar masonry wall -88.91 Cum

Others -- quantities

Capabilities of Vendor

The Tenderer should be a PWD Registered Class III & above contractor

PWD Registration Certificate (Class I/II/III/IV)

as per this note, each tenderer should demonstrate availability of few key equipments / machinery for execution of the work. However as per Govt circular no GO-FD/ AE 263/EXP12-2022 dt 11-05-2022, this clause for owning key equipments for works costing up to Rs.3.00 crores is exempted.

Others -- equipments

Financial Status

Liquid assets and/or availability of credit facilities of not less than Rs 24.14 Lakhs Credit lines/letter of credit/ certificates from the banks for meeting the fund requirement etc. LOC should be in prescribed format-2, if not, then the tender will not be accepted.

Line of Credit

3.2 b To qualify for the award of this contract, each Tenderer in its name should have in the last five years i.e. 2021-22, 2022-23, 2023-24, 2024-25 & 2025-26Achieved in at least Two financial years an average Annual financial turnover in all classes of civil engineering construction works only of Rs. of Rs 80.45 Lakhs (With UDIN Number)

Audited CA Certificate of Annual Turnover

Reports on the financial standing of the Bidder, such as profit and Loss Statement and Auditor Report for the last five years

Others -- Others

Others

Tearms and Conditions as per KW-3 Bid Document

Others -- OTHER

Any Deviation/Error/mistake found in units of items, they should be read as in the Unified SR 2023-24 and subsequent Corrigendums and the rates shall be quoted accordingly

Others -- Others

Fee & Financial Details

Tender Fee Amount

₹2,020

EMD Fee Amount

₹1.6 L

Important Dates

Last Activity

2 Jul 2026

Published

2 Jul 2026

Bid Opening

23 Jul 2026

Download Ends

21 Jul 2026

Pre-Bid Meeting

21 Jul 2026

BOQ Preview

•

Mechanical Means -

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

•

supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-cha...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ...

•

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ...

•

Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nomin...

•

Ready Mix Concrete (RMC) with Cement & Cementitious Materials.

•

Providing and laying in position Ready Mixed or Batch Mixed concrete as per IS 10262 mix design procedure for Cement Concrete wor...

•

Ready Mix Concrete (RMC) with Cement & Cementitious Materials.

•

Providing and laying in position Ready Mixed or Batch Mixed concrete as per IS 10262 mix design procedure for Cement Concrete wor...

•

Ready Mix Concrete (RMC) with Cement & Cementitious Materials.

•

Providing and laying in position Ready Mixed or Batch Mixed concrete as per IS 10262 mix design procedure for Cement Concrete wor...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Ready Mix Concrete (RMC) with Cement & Cementitious Materials.

•

Providing and laying in position Ready Mixed or Batch Mixed concrete as per IS 10262 mix design procedure for Cement Concrete wor...

•

Ready Mix Concrete (RMC) with Cement & Cementitious Materials.

•

Providing and laying in position Ready Mixed or Batch Mixed concrete as per IS 10262 mix design procedure for Cement Concrete wor...

•

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating Each depos...

•

Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transporta...

•

Providing Brick work with common burnt clay Non Modular bricks of clasS designation 3.5 in foundation and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all material...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffoldin...

•

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mor...

•

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even an...

•

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, ...

•

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 g/L and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior pai...

•

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...

•

Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm...

•

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thick- ness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades,...

•

Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed ti...

•

Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement ...

•

Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing a...

•

Providing Red Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement...

•

Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame...

•

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to open...

•

Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic E...

•

Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly clean...

•

Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @0.75 L/10 m² of approved brand and manufacture to give an e...

•

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manuf...

•

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and...

•

Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Bar- rel type) with necessary screws etc. complete :

•

Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992

•

with necessary screws etc. complete : 125mm

•

Providing and fixing IS : 12817 marked stainless steel butt hinges with

•

stainless steel screws etc. complete : 125x64x1.90mm

•

Providing and fixing door latch with necessary screws etc complete. - Oxidised mild steel door latch

•

Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for...

•

Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, tr...

•

Water Supply Works

•

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixi...

•

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jo...

•

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jo...

•

Supply and delivery at site special moulded variety PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments - 32 mm dia PVC Elbows

•

Supply and delivery at site special moulded variety PVC tee as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments - 32 mm dia PVC Tee

•

Supply and delivery at site special moulded variety PVC bend as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments - 32 mm dia PVC BEND

•

Providing and fixing PTMT bib cock of approved quality and colour - 15 mm nominal bore, 90 mm long, weighing not less than 93 g

•

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for ...

•

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for t...

•

Mechanical Means -

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

•

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating Each depos...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Ready Mix Concrete (RMC) with Cement & Cementitious Materials.

•

Providing and laying in position Ready Mixed or Batch Mixed concrete as per IS 10262 mix design procedure for Cement Concrete wor...

•

Ready Mix Concrete (RMC) with Cement & Cementitious Materials.

•

Providing and laying in position Ready Mixed or Batch Mixed concrete as per IS 10262 mix design procedure for Cement Concrete wor...

•

Ready Mix Concrete (RMC) with Cement & Cementitious Materials.

•

Providing and laying in position Ready Mixed or Batch Mixed concrete as per IS 10262 mix design procedure for Cement Concrete wor...

•

Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers including cost of material etc as per specifications and as per directions ...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

polyurethane based single Component for Existing surface - Providing and Applying PU based Elastomeric Liquid Applied PU Waterproofing Membrane single component, cold applied, water based acry...

•

Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, incl...

•

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of...

•

Providing & fixing 455x610 mm cast iron cover with frame weight to be not less 38kgs (weight of cover 23 kgs and weight of frame 15 kgs)and necessary locking arrangements with M.S flats 32x6 mm etc & ...

•

Electrification Work

•

Concealed Conduit System

•

Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and runni...

•

Concealed Conduit System

•

Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and runni...

•

Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks an...

•

Extra for Groove cutting in brick wall/CC floor to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing upto wall surface complete. upto 50 mm conduit in brick wall

•

Supplying And Fixing Metal Fan Box with Round Hook.

•

Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wi...

•

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

•

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall

•

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall

•

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall

•

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.

•

6A One Way Switch

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.

•

6A Three Way socket

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.

•

Stepped Fan Regulator Two Module

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.

•

6/16A Universal Socket

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.

•

Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board.

•

6A Batten Holder

•

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...

•

Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 p...

•

Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball be...

•

Supplying of recess mounting non integral type ........ LED w luminaire comprising of pressure decast/extruded aluminium housing, with spring loaded false ceiling clamps, Power LEDs with CCT 6500 degr...

•

Supplying of .....feet -PVC Batten with integrated LED tube .... W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220- 240V@ 50/60Hz & P...

•

Supplying & fixing of retrofit type - LED bulb ...... W with OPAL acrylicdiffuser comprising of LED source with CCT 6500 degree K, CRI 70%. efficacy 80 lumen per W, life 25000 burning hours and Compli...

•

Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires,

•

Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S'' hook with fan regulator to the existing board together with supplying and fixing 5 A. ceiling rose, necessary ...

•

Supplying exhaust fan of 1440 RPM of 300 mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply.

•

Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5 A. ceiling rose with sufficient length of 23/0.0076 inch PVC insulated twin core wire.

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

government notification BC LOC letter to be issued by the Banks.pdf

Others - OTHERS • 1.73 MB

Bid document kw-3 wi 29190 CALL 5.doc

Tender Document • 0.71 MB

Ready to Participate?

Download all tender documents and submit your bid