138WE/L-75/24-25

Amount

Dismantling floor , hearth or wall tiling including cement mortar bedding (but including backing) , rubbish off the premisescomplete all as specified and directed by engr-in-Charge

Material & Labour 25mm thick PCC 1:2:4 type B-0 using12.5mm graded stone aggregate as in flooring and finished surface as in received tiles complete all as specified and as directed.

M&L for Glazed ceramic coloured tiles in vertical surface 450x350x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match (Note: Any disturbed surfaces shall be matched w/o any extra cost to the govt) over and including 10mm thck screed bed below tile for dado/skirting CM 1:4 complete all as specified and directed.

M&L for 7mm thick non skid coloured ceramic tiles (area of each tile exc 0.06 and nexc 0.11sqm) etc set and jointed in neat cement slurry and pointed with white or coloured cement mixed with pigments and 15mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes.

M&L for Vitrified double charged tiles 10 mm thick in size of 600mmx600mm as in floors/skirting/dados set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Dismantling wall and ceiling boards (Fiber, pulp, insulation, blankets) any thickness including covered fillets and supporting members complete all as specified and directed.

M&L for 6mm thick prelaminated board, solid core, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed to walls of any description or timper scantling with screws to timber frame work, complete all as specified and as directed by Engr-in-Charge.

Taking down chowkhat or frames exc 1.50 Sqm n.exc 4 Sqm (without taking down shutters from the frames complete all as specified and directed.

All as per serial item no 8.00 here in before but n.exc 1.50 Sqm complete all as specified and directed.

S&F IInd class soft wood as in plain solid straight chowkhats wrought framed rebated on the solid put together on with glue pinned at joints complete all as specified and directed.

S & F 35mm thick 2nd class softwood, plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats

Hacking out old broken glasses (Any thickness, size quality, description) from wooden or steel frames fixed with putty or wooden beads.

S&F 3mm thick glass sheet any size ordinary quality in steel or wooden frames n exc 0.5 Sqm complete with fixing materials such as putty glazing pins wooden beads etc. complete all as specified and directed.

Dismantling plain or corrugated steel sheeting any gauge thickness including nanital or similar pattern complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for wind ties as in Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 (Brackets over 10 kg each to be measured under 'Structural Steel' complete all as specified and directed by Engrr-in-Charge.

Dismantling structural steel work including doors and gates of any description.

M&L for two coat of synthetic enamel paint on new /previous untreated corrugated steel surface including prepation over a coat of red oxide zinc chrome primer with mordant solution complete all as specified and directed .

Dismantling of 75 / 110mm bore cast iron , PVC or reinforced concrete pipes jointed in cement mortar and taking out of trenches if reqd of any dia complete all as specified and directed.

S&f 75 mm bore PVC (SWR) pipe single socketed , in any length with rubber joints laid in trenches or in floors complete all as specified and directed.

S&F 75mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

M&L 75 mm bore PVC (SWR)) multi floor trap with grating including jointing with solvent cement complete all as specified and directed.

Taking down cement plaster on brick/pcc block or conc surfaces including racking out joints hacking for key, scrubbing down with water etc. complete all as specified and directed.

M&L rendering 15mm thick in cm 1:4 concrete or brick surfaces as in wall finishes even andsmooth w/o using extra cement incl mixing of wpc .complete all as specified and directed.

Prepration of new plaster surface of wall and applying two caot of cement base paint over a caot of primer including balance area complete removal complete all as specified and directed.

Demolition brick work / block masonry or stone/ boulder masonry, built in built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for precast cement concrete block masonary type C-1 1:3:6 , using crushed stone 20mm graded aggregate ,set and jointed in cement martar 1:6 complete all as specified and directed.

Demolition of cement concrete (un reinforced ) in ground floors and pavings n.exc 15cm thick (below or above ground level ) all as specified and removing debris ouside MD land complete all as specified and directed.

Material & Labour 75mm thick PCC 1:3:6 type C1 (using 20mm graded stone aggregate) as in plinth protection and finished concrete surface even and smooth without using extra cement including making proper joints with bitumen mastic with sand as per specification at an interval of 3m complete all as specified and as directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15 cm deep and getting out hard / dense soil, Complete all as specified.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 type D-2, using 40mm graded crushed stone aggregate as in sub base complete all as specified and directed..

M&L Sand filling under floors or in foundations including watering and consolidation, complete all as specified and directed.

M&L Machine pressed precast concrete coloured interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade , complete all as specified and directed.

Taking up or down steel tubing 25mm to 32 mm bore including cleaning for refixing or removal to store. complete all as specified.

S&F 25mm bore 3-layer PP-R Polypropylene random copolymer concealed pipes SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass treaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified.

S&F in repairs PPR gate valve conforming to ISO 2000 screw down end for PPR pipe or for union and fixed completey as specified for the size 25mm bore, complete all as specified.

S&F in repair 10 ltrs capacity incl PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets including flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern, complete all as specified

S&F viterous China squatting pan or Orissa patten 580 x 440 mm white with integral foot rest (excluding cistern) with front or back inlet ant pattern as in repairs incl bedding with p.c.c type B-I 1:2:4 , using 20 mm graded crushed stone aggregate complete all as specified and directed.

S&F bevelled edge mirror in any size 6 mm thick fixed to wall or tile surface with stainless steel spacer, size and shape as approved by GE complete all as specified and directed by Engr-in-Charge.

S&F PVC connection 15mm bore with PTMT nuts of length 600mm complete all as specified and directed by Engr-in-Charge

S&F in repairs 15mm bore bib taps long or short body fancey type chromium plated with capstan head chromium plated screwed down screwed for iron pipe or brass ferrule. (Min wt 350 Gms) complete all as specified and directed.

S&F in repairs 15mm bore pillar tap fancy type cast copper alloy with capstan head chromium plated screwed down under high pressure with or without lettered hot or cold with long shank and fly nuts screwed for iron pipe complete all as specified and directed.

S&F in repairs 15mm bore stop cock or angle valve fancy type chromium plated cast copper alloy screw down under high pressure with crutch or butter fly handle screwed both ends for iron pipe or brass ferrule complete all as specified and directed by Engr-in-Charge.

S&F Towel rail with accessories set (fixed in repair ) complete all as specified and as directed.

S& F SS Cloth hanger Size 450 mm complete all as specified and directed.

S&F Table top wash basin,(fixed in repair) size 600x385x195mm, complete all as specified and as directed.

M&L for Granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite black, complete all as specified and directed.

S&F in repairs PPR gate valve conforming to ISO 2000 screw down end for PPR pipe or for union and fixed completey as specified for the size 32mm bore, complete all as specified and directed.

S&F PPR 25 mm plain bore socket, Tee, Elbow, Elbow, bent and reducer in new or old position complete all as specified and directed.

S&F in repair PPR 25 mm FT and MT Socket, Tee, Elbow, Bent tank nipple and reducer in new or old position complete all as specified and directed.

Taking down carefully copper/Aluminum point wiring (Light, Fan, Socket or power) complete fitting such as switches, ceiling, regulator, sockets eto removing materials to be store for keeping in safe custody for taking credit and making good disturbed surfaces of walls, floors etc as directed

M&L for point wining with FRLS copper conductor cable Multistrand, single core 1.5 Sqmm size for one light point or bell point /Ex fan Point controlled by one switch including one run of 1.5 Sqmm multistrand FRLS PVC copper conductor cable for earth continuity in and including PVC casing and capping of approved size and quality fixed on walls/ceiling including rectangular PVC board heavy duty type for mounting sitches sockets etc complete all as directed and specified

All as per item No 55 but for 5 Amps Socket outlet in same Board with 1.5 sq mm cable complete all as specified and directed by Engr in Charge

All as per Item No 55 but for 5 Amps Switch Socket Combination in independent board with 1.5 Sqmm Cable complete all as specified and directed by Engr in Charge.

All as per item No 55 above but for power point 3 pin switch socket 15 Amp with FRLS PVC copper conductor cable multistrand unsheathed 2.5 Sqmm on independent board incl one run 2.5 Sqmm multistrand FRLS PVC copper conductor cable for earth continuity in and including PVC casing and capping fixed on wall including PVC box 2 mm complete all as specified and as directed by Engr in Charge.

S & F in replacement of switch Socket combination 3 pin 5 & 15 Amps flush type 230 volts complete all as directed

S & F in replacement of switch Socket combination flush type 3/5 pin 5/6 Amps 230 volts complete all as directed

Supply and fix in replacement of Socket outlet 3 pin 5 Amps 230 volts flush type complete all as directed

S&F in replacement switch piano 5 amps all as specifed

Supply and fix as in replacement decorative durable LED batten fitting 18 Watt 4 feet Each long with decorative and caps, powder coated CRCA decorative for LED tube 1x18 W LED including LED retrofit 4 feet long (white colour) tube of 18 watt having driver connector block etc complete with all accessories prewired and connecting electrically to celing rose using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 Sqmm 3 core all as required at site or directed by Engr in Charge

Supply and fix in replacement of lamp holder insulated body with back plate complete all as specified and as directed.

Supply and fix in replacement of Ceiling rose, surface Bakelite three terminals complete all as directed

Supply and fix in replacement of sheet metal enclosure for DBs with 200 Amp bus bar double door when MCCB's to be used 415 Volts SPN 8 Ways all as specified and directed by Engr-in-Charge

Supply and fixing in replacement exhuat fan made of sturdy engineering plastic complete with louvers shutter, voltage 230 volt , 50 Hz RPM 1200, copper winding of sweep 300 mm complete all as specified and as directed.

S&F in replacement of old U/S LED Mirror light fitting of 9/10 W and type 230 volts box type, with standard specification etc complete withh all accessories pre wired twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed by Engr in Charge.

S&F in replacement of Old U/S Lamp LED 7/9 Watt, 230 volts 50 Hz AC complete all as specified

Supply and fix in replacement of MCB SPN 40 to 63 Amp 240 Volts AC ISI marked all as specified and directed by Engr-in-Charge.

Supply and fix in replacement of MCB SP 6-32 Amps 240 Volts AC all as specified and directed by Engr-in-Charge.

M & L for submain wiring alongwith earth wire with the following sizes of FRLSH PVC insulated copper conductor, single core cable in surface/recessed as required in PVC casing Caping wire size 2x6.0 sq mm 1x6.0 sq mm earth wire complete all as specified.

Supplying, laying, jointing and testing underground cable PVC XLPE insulated armoured and PVC sheathed LT 1100 volts grade (heavy duty) with aluminium conductor 2 core, 16 Sqmm, confirming to IS-1554, laid in ducts/through pipes, in floor, on poles, in trenches complete all as specified and directed by Engr in Charge. Note:- Clamps, Gl pipes, excavation, earth work, sand cushioning and brick protection cover shall be measured and paid for separately.

Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metres below normal ground level, connecting to the Galvanized iron strip 25x4mm by means of bolts, nuts , check nuts and washers of galvanized iron and steel earth wire protected by provision of GI light grade pipe 15 mm bore including provision of concrete pit made from PCC ( 1:2:4) type B-1 (using 20 mm graded stone aggregate) with 40mm thick cover of RCC 1:2:4 reinforced with XPM (Weight not less than 4 Kg/Sqm) and frame of angle iron 40 x 40 x 6 mm and handle of 6 mm dia MS bar made to shape, GI light grade 20 mm bore pipe for watering perforated at bottom, 1.50 metre long placed on top edge of earth plate, common salt & charcoal filling, with fixing arrangement , funnel, wire mesh and earth work in hard/dense soil , returning filling in and removal of surplus soil to a distance not exceeding 50 metres, all as per electrical plate No 3 of SSR 2009 Part-I and connecting to MCBDB’s earth test point all as specified or indicated including testing on completion .

M/S BALI CONSTRUCTIONS (BID ID -3146012)

R B TRADERS (BID ID -3150788)