REPAIR REPLACEMENT MAINTANCE OF WOODEN FURNITURE AND CHARPOY GI IP INCLUDING POLISHING OF WOODEN FURNITURE UNDER GE 860 EWS AT BSO YARD

BED PLY TOP : FD-246/ 1102

S&F12 mm thick BWR plywood 7 ply garde A of size 900x 1800 mm ISI Marked as confirmed to IS-303 in single piece as per drawing without any joint to the bed frame with suitable stainless steel screws wood with cup washer including removal of damaged ply wood all as specified on drawing or as directed by Engineer-in-charge. Make:- Green ply/Century ply/kitply

S&F in repairs to 1st class hardwood long rail as per existing size 1800mm x 85m x 25 mm of Bed including removal of damaged long rail all as specified on drawing or as directed by Engineer-in-charge. (Each long rail will be measured as single unit)

S&F in repairs to 1st class Hard wood short rails as per existing size 900mm x60mm x 30mm shall be made from existing long rail all as specified on drawing or as directed by Engineer-in-charge. (Each short rail will be measured as single unit)

S&F in repairs to head board consisting of 60 x 30 x 260mm vertical size and 30 x 60 x 400mm horizontal including legs of size 60 x 60mm in section at top and length 400mm from bottom of leg and 30 x 30mm in section at bottom complete including removal of damaged head board all as specified on drawing or as directed by Engineer-in-charge.

S& F in repair to foot board consisting of 22 x 75mm in section hard battens 3 Nos at equal space, joining top and bottom horizontal rails of foot board. The top and bottom horizontal rails of size 30 x 60mm shall be 1st quality of Hard wood. The vertical legs above horizontal rails shall be 30 x 60mm all as specified on drawing or as directed by Engineer-in-charge. All wood work shall be of 1st Class hard wood.

S&F in reapirs to new 1st class Hard wood stiffeners of size 40 x 60mm long complete including removal of damaged stiffiners all as specified on drawing or as directed by Engineer-in-charge.

S&F in reapirs to 4mm thick OST plywood commercial of size 780 x 340mm beading of both side of head board including removal of damaged ply all as specified on drawing or as directed by Engineer-in-charge. Make:- Green ply/Century ply/kitply

S&F in reapirs to 4mm thick OST plywood commercial of size 780 x 180mm beading of both side of foot board including removal of damaged ply all as specified on drawing or as directed by Engineer-in-charge. Make:- Green ply/Century ply/kitply

S&F in repairs to flat iron of mild steel of size 35mm x 5mm, 150mm long cleat bents to right angle on each corners of Bed all as specified on drawing or as directed by Engineer-in-charge.

HAT STAND WITH MIRROR : FD-361/1110

S & F in repairs new mirror 5 mm thick for Hat stand with mirror of approved make with complete frame back all as specified on drawing or as directed by Engineer-in-charge.Make:-Saintgobin/Modiguard

M & L for removing of existing unserviceable Back and providing new Back of 6mm plywood commercial of size 710mm shall be fixed with headless nail, rest all as shown on drg and as directed by Engr-in-Charge. Make:-Greenply/Century ply/Kitply

S&F of brass pegs with brass screw in place of unsv/ broken pegs in hat stand with mirror, rest all as shown on drg and as directed by Engr-in-Charge.

PEG TABLE : FD-274/236 /277

S & F in repairs of existing unserviceable table top made out of 18mm thick prelaminated particle board exterior grade conforming to IS 12823 of size 300 x 450m with one side hard facing and balancing white on the other side and fixed with 18x12mm wooden beading (Hard) on all the four sides all as specified on drawing or as directed by Engineer-in-charge.Make:-Ecoboard/Bhutan Board/Archid

S&F in repairs to unserviceable damaged legs of size 380mm long, thickness 30x50mm from made out of first class hard wood complete, rest all as shown on drg and as directed by Engr-in-Charge.

S&F in repairs to unserviceable damaged top rail of size 20 x 40 mm from made out of first class hard wood (Hard) complete, rest all as shown on drg and as directed by Engr-in-Charge.

S&F in repairs to unserviceable damaged bottom rail of size 20x 40mm from made out of first class hard wood (Hard) complete, rest all as shown on drg and as directed by Engr-in-Charge.

Table dressing Ladies: FD-251 & 378

S & F in repairs table top of size 900mm x 380mm with 18 mm thick pre-laminated particle Board exterior grade confirming to IS 12823 exterior grade of approved make, all as specified on drawing or as directed by Engineer-in-charge

S & F in repairs new 5mm thick Glass shutters of size 380mm x 550mm all as specified on drawing or as directed by Engineer-in-charge. (Each glass shutter shall be measured as single unit) Make:-Saintgobin/Modiguard

Removing the existing unserviceable Aluminium channel and S & F in repairs Aluminium Channel of size 5.5 mm all as specified on drawing or as directed by Engineer-in-charge.

S & F in repairs new back suport made out of 6 mm thick plywood for mirror of size 1020mm x 410mm all as specified on drawing or as directed by Engineer-in-charge.

S & F in repairs new mirror 5 mm thick 366x 1220mm of size of approved make with complete frame back all as specified on drawing or as directed by Engineer-in-charge. Make:-Saintgobin/Modiguard

Replacement of existing unserviceable drawer for made out of 12mm thick prelaminated particles board exterior grade confirming to IS 12823 exterior one side hard facing and balancing white on the other side wooden beading around all as specified on drawing or as directed by Engineer-in-charge. Note-Each drawer should be measured as single unit

TABLE DRESSING GENTS : FD-230 & 379

Replacement of existing unserviceable drawer for made out of 12mm thick prelaminated particles board exterior grade confirming to IS 12823 exterior one side hard facing and balancing white on the other side and 12x12mm wooden beading around all as specified on drawing or as directed by Engineer-in-charge. Note-Each drawer should be measured as single unit

S & F in repairs new mirror 5mm thick of size 380 x 760mm with full frame all as specified on drawing or as directed by Engineer-in-charge.make:-Saintgobin/Modiguard

S & F in repairs new top of size 900x300mm made out of 18 mm thick pre laminated particle borad exterior grade of approved make, all as specified on drawing or as directed by Engineer-in-charge.

TABLE BED SIDE : FD-276/TP

Removing of existing unserviceable sides of size 510mm x 230mm. Table Bed Side and providing new sides of 18mm thick prelaminated particle Board exterior grade confirming to IS 12823 with hard facing one side and balancing white on the other side of exterior grade and 18 x 6 mm hard wood beading on front sides, rest all as specified on drawing or as directed by Engineer-in-charge. (Each sides will be measure as single unit) Make:-Ecoboard/Archid/Bhutan

Removing of existing unserviceable Top or bottom of Table Bed Side and providing new Top or bottom of size 460mm x 440mm , 18mm thick prelaminated particle Board exterior grade confirming to IS 12823 with HARD facing one side and balancing white on the other side of exterior grade and 18 x 6 mm hard wood beading on front sides, rest all as shown on drg and as directed by Engr-in-Charge. (Each Top or Bottom will be measure as single unit) Make:-Ecoboard/Archid/Bhutan

Removing of existing unserviceable Back of Table Bed Side and providing new Back of size 230mm x 450mm, 6mm plywood commercial shall be fixed with headless nail, rest all as shown on drg and as directed by Engr-in-Charge.Make - Kitply/Greenply/Century Ply

Removing of existing unserviceable shelf Table Bed Side and providing new shelf of size 207mm x160mm, 12mm thick prelaminated particle Board exterior grade confirming to IS 12823 with HARD wood facing one side and balancing white on the other side of exterior grade and 12 x 6 mm HARD wood beading on front sides, rest all as shown on drg and as directed by Engr-in-Charge. Make:-Ecoboard/Archid/Bhutan

TABLE DINNING 8 PERSONS : FD-273 & 1115

Replacement of existing unserviceable table top of size 1800 mm x 900mm made out of 18mm thick prelaminated particle board exterior grade confirming to IS 12823 with one side hard facing and balancing white on the other side and fixed with 18x12mm wooden beading on all the four sides all as specified on drawing or as directed by Engineer-in-charge.Make:-Ecoboard/Archid/Bhutan

S&F in repairs to unserviceable damaged legs of size 760mm x 75mm x 40mm made out of first class hard wood complete, rest all as shown on drg and as directed by Engr-in-Charge.

S&F in repairs to unserviceable damaged side short rails of size 900mm x 75mm x 40mm new legs made out of first class hard wood complete, rest all as shown on drg and as directed by Engr-in-Charge.

S&F in repairs to unserviceable damaged long rails of size 1800mmx 75mm x 40mm from new legs made out of first class hard wood complete, rest all as shown on drg and as directed by Engr-in-Charge.

TALBE DINNING 6 PERSONS : FD-273 & 1115

Replacement of existing unserviceable table top of size 1500x900mm for made out of 18mm thick prelaminated particle board exterior grade confirming to IS 12823 with one side hard facing and fixed with 18x12mm wooden beading (teak) on all the four sides all as specified on drawing or as directed by Engineer-in-charge.Make:-Ecoboard/Archid/Bhutan

S&F in repairs to unserviceable damaged legs of 760mmx 75mmx 40mm from new legs made out of first class hard wood legs of size 900mm x 75mmx40mm complete rest all as shown on drg and as directed by Engr-in-Charge.

S&F in repair short rails of size 900mmx75mmx40mm from new legs made out of first class hard wood complete, rest all as shown on drg and as directed by Engr-in-Charge.

S&F in repairs to unserviceable damaged long rails of size 1500mm x75mm x 40mm from made out of first class hard wood complete, rest all as shown on drg and as directed by Engr-in-Charge.

COMMON FOR TABLE DINNING 6/8 PERSONS : FD-273 & 1115

S&F in repairs Triangular wooden bracket of size 50mm x 50mm 1class hardwood of thick for all types of tables between leg & stiffners for extra strength complete, rest all as shown on drg and as directed by Engr-in-Charge.

M & L for fixing of PVC shoes superior quality of size 25mmx25mm dia with 30mm long screws in the following furniture items as specified & directed by Engr-in-charge.

Teapoy Wooden : FD-278,382

Replacement of existing unserviceable table top of size 450x600mm made out of 18mm thick prelaminated particle board exterior grade confirming to IS 12823 with white one side HARD facing and on the other side and fixed with 18x12mm wooden beading (Hard) on all the four sides all as specified on drawing or as directed by Engineer-in-charge.

S&F in repairs to unserviceable damaged legs of size 450mmx60mmx30mm from made out of first class hard wood (Hard) complete, rest all as shown on drg and as directed by Engr-in-Charge.

S&F in repairs to unserviceable damaged bottom stiffners of size 600mmx20mmx10mm from teapoy made out of first class hard wood (Hard) complete, rest all as shown on drg and as directed by Engr-in-Charge.

S&F in repairs to unserviceable damaged long rail from teapoy made out of first class hard wood complete, rest all as shown on drg and as directed by Engr-in-Charge.

S&F in repairs to unserviceable damaged short rail from teapoy made out of first class hard wood complete, rest all as shown on drg and as directed by Engr-in-Charge.

TABLE CENTRE : FD-274 / 235

Replacement of existing unserviceable table top of size 500mm x 400 mm 18mm thick for made out of prelaminated particle board exterior grade confirming to IS 12823 with one side HARD facing and white on the other side and fixed with 18x12mm wooden beading (Hard) on all the four sides all as specified on drawing or as directed by Engineer-in-charge.Make Bhutan Board/Archid/Eco Board, Kitply

S&F in repairs to unserviceable damaged legs of size 380mm x60mm x 30mm from made out of first class hard wood (Hard) of size 400mm complete, rest all as shown on drg and as directed by Engr-in-Charge.

S&F in repairs to unserviceable damaged bottom stiffners of size 500mmx50mmx20mm made out of first class hard wood (Hard) complete, rest all as shown on drg and as directed by Engr-in-Charge.

S&F in repairs to unserviceable damaged long rail made out of first class hard wood complete, rest all as shown on drg and as directed by Engr-in-Charge.

S&F in repairs to unserviceable damaged short rail made out of first class hard wood complete, rest all as shown on drg and as directed by Engr-in-Charge.

TABLE WRITING : FD-275/1116

Table top of size 1145x600x760mm with 18mm thick prelaminated particle board exterior grade confirming to IS12823 of approved make including edging with wooden beading all as per drg and as directed by Engineer-in-charge.Make Bhutan Board/Archid Board, Eco Board, green Ply/Kitply

S&F in repairs to unserviceable damaged legs of size 760mmx25mmx35mm made out of first class hard wood complete, rest all as shown on drg and as directed by Engr-in-Charge.

S&F new, short rails of size 600mmx 25mm x50mm made out of first class hard wood including removing of unserviceable damaged shot rail complete, rest all as shown on drg and as directed by Engr-in-Charge.

S&F new long rails of size 1145 mmx 25mm x50mm made out of first class hard wood including removing of unserviceable damaged long rail complete, rest all as shown on drg and as directed by Engr-in-Charge.

S&F new bottom stiffners of size 1145mmx50mm x 25mm made out of first class hard wood including removing of unserviceable damage bottom stiffners complete, rest all as shown on drg and as directed by Engr-in-Charge.

S&F in repairs to unserviceable damaged drawers of size 355mm long made out of first class hard wood including providing 6mm thick commercial ply to bottom of drawer, 18mm thick prelaminated particle board exterior grade Cabinet door & drawer along with locking arrangement and handles complete, rest all as shown on drg and as directed by Engr-in-Charge.

Table 3'X2' wooden w/o drawer : FD-231,284

Removing of existing unserviceable table top and providing new table top made out of 18mm thick prelaminated particle board exterior grade confirming to IS 12823 with hard wood facing one side and balancing white on the other side and 18x4 mm hard wood beading on all round, rest all as shown on drg and as directed by Engr-in-Charge. Make- Bhutan/Archid board/Eco Board

S&F in repairs to unserviceable damaged legs of size 760mmx 60mmx40mm made out of first class hard wood complete, rest all as shown on drg and as directed by Engr-in-Charge.

S&F in repairs to unserviceable damaged side short rails of size 600mm x60mmx40mm made out of first class hard wood complete, rest all as shown on drg and as directed by Engr-in-Charge.

S&F in repairs to unserviceable damaged front long rails of size 900mmx50mmx25mm made out of first class hard wood complete, rest all as shown on drg and as directed by Engr-in-Charge.

S&F in repairs to unserviceable damaged bottom stiffners of size 900x20mm x60mm made out of first class hard wood complete, rest all as shown on drg and as directed by Engr-in-Charge.

Table 3'X2' wooden with drawer : FD-224,283

Removing of existing unserviceable table top and providing new table top made out of 18mm thick prelaminated particle board confirming to IS12823 with Hardwood facing one side and balancing white on the other side of exterior grade and 18x4 mm hard wood beading on all round, rest all as shown on drg and as directed by Engr-in-Charge. Make : Bhutan Board, Archid Board, Eco Board.

S&F in repairs to unserviceable damaged legs of size 760mmx60mmx40mm for made out of first class hard wood complete, rest all as shown on drg and as directed by Engr-in-Charge.

S&F in repairs to unserviceable damaged side short rails of size 600mmx20mmx110mm for made out of first class hard wood complete, rest all as shown on drg and as directed by Engr-in-Charge.

S&F in repairs to unserviceable damaged front long rails of size 900mm x20mmx110mm for made out of first class hard wood complete, rest all as shown on drg and as directed by Engr-in-Charge.

S&F in repairs to unserviceable damaged bottom stiffners of size 900mmx25mmx40mm (both short & long) from made out of first class hard wood complete, rest all as shown on drg and as directed by Engr-in-Charge.

S&F in repairs to unserviceable damaged drawers of size 300mm x 30mm x 20mm made out of first class hard wood including providing 6mm thick commercial ply to bottom of drawer complete, rest all as shown on drg and as directed by Engr-in-Charge.

COMMON FOR Teapoy,Table Centre,Table writing,Table withdrawer ,Table with out drawer and and Table 3'x3' : FD-278,223,275,231,224,291

M & L for fixing of PVC shoes superior quality of size 25mmx25mm dia with 30mm long screws in the following furniture items as specified & directed by Engr-in-charge:-

CHAIR DINNING : FD-279, FD-1105

Removing the existing unserviceable rear leg and providing with new hard wood rear leg of size 890mm x 20mm x 25mm complete all as specified on drawing or as directed by Engineer-in-charge.

Removing the existing unserviceable front leg and providing with new hard wood front leg of size 460mm x 20mm x 25mm complete all as specified on drawing or as directed by Engineer-in-charge.

Removing the existing unserviceable back rest and providing new hardwood back rest of size 430mm x 45mm x 15mm slightly curved complete all as specified on drawing or as directed by Engineer-in-charge.

Removing the existing unserviceable front rail and providing new hardwood front rail of size 440mm x 65mm x 30mm drilling holes at 12.5 mm C/C complete all as specified on drawing or as directed by Engineer-in-charge.

Removing the existing unserviceable rear rail providng new hard wood rear rail of size 430mmx65mm x 30mm including drilling holes at 12.5 mm C/C complete all as specified on drawing or as directed by Engineer-in-charge.

Removing the existing unserviceable side rails and providing new hard wood side rails of size 240mm x 65mmx 30 including drilling holes at 12.5mm C/C complete all as specified on drawing or as directed by Engineer-in-charge.

Recaning of repaired chair dining with best quality of approved plastic cane 1.80 x0.46mm and border with 3x0.60mm cane of white or cream ivory all as specified on drawing or as directed by Engineer-in-charge. Make -Premier Plastic Industries/Garware Plastic Ltd/Maharashtra Plastic Cane Industry

CHAIR DINING LONG BACK WITH CUSHION : FD-367

Removing the existing unserviceable rear leg and providing with new hardwood rear leg of size 1400mm x 25x35mm complete all as specified on drawing or as directed by Engineer-in-charge.

Removing the existing unserviceable front leg and providing with new hard wood front leg of size 650mm x 25mm x 35mm complete all as specified on drawing or as directed by Engineer-in-charge.

Removing the existing unserviceable seat and back of size 750mm x 450mm x 400mm and providing with new 75/50mm thick synthetic foam of 40/32 density fixed over wooden frame covered with leathere rexene, costing not less than Rs 300.00/sqm of approved shade, texture & quality complete all as specified on drawing or as directed by Engineer-in-charge.

Removing the existing unserviceable front rail and providing new hard wood front rail of size 450mm x 25mm x 40mm all as specified on drawing or as directed by Engineer-in-charge.

Removing the existing unserviceable rear rail providng new hard wood rear rail of size 450mm x 25mm x 40mm all as specified on drawing or as directed by Engineer-in-charge.

Removing the existing unserviceable side rails and providing new hard wood side rails of size 450mm x 25mm x 40mm complete all as specified on drawing or as directed by Engineer-in-charge.

CHAIR WRITING WOODEN : FD-280 & 1107

Removing the existing unserviceable rear leg and providing with new hard wood rear leg of size 890mm x 55m x 35mm complete all as specified on drawing or as directed by Engineer-in-charge.

Removing the existing unserviceable front leg and providing with new hard wood front leg of size 460mm x 55mm x 30mm complete all as specified on drawing or as directed by Engineer-in-charge.

Removing the existing unserviceable back rest and providing new hard wood back rest of size 225mm x50mm x 35mm slightly curved complete all as specified on drawing or as directed by Engineer-in-charge.

Removing the existing unserviceable front rail and providing new hard wood front rail of size 535mm x30mm x 65mm drilling holes at 12.5 mm C/C complete all as specified on drawing or as directed by Engineer-in-charge.

Removing the existing unserviceable rear rail providing new hard wood rear rail of size 535mm x 30mm x 55mm including drilling holes at 12.5 mm C/C complete all as specified on drawing or as directed by Engineer-in-charge.

Removing the existing unserviceable side rails and providing new hard wood side rails of size 535mm x 30mm x 55mm including drilling holes at 12.5mm C/C complete all as specified on drawing or as directed by Engineer-in-charge.

Removing the existing unserviceable broken arm rest and providing new hard 1st class hard wood arm rest of size 535mm x 15mm x 20mm complete all as specified on drawing or as directed by Engineer-in-charge.

Recaning of repaired chair writing with best quality of approved plastic cane 1.80 x0.46mm cane and border with 3x0.60mm cane of white or cream/ivory all as specified on drawing all as specified on drawing or as directed by Engineer-in-charge. Make -Premier Plastic Industries/Garware Plastic Ltd/Maharashtra Plastic Cane Industry

CHAIR EASY : FD-229 & 1108

Removing the existing unserviceable rear leg and providing with new first class hard wood rear leg of size 440x 35mm x 20mm complete all as specified on drawing or as directed by Engineer-in-charge.

Removing the existing unserviceable front leg and providing with new first class hard wood front leg of size 355mm x 35mm x 20m complete all as specified on drawing or as directed by Engineer-in-charge.

Removing the existing unserviceable broken arm rest and providing new first hardwood arm rest of size 510mm x 65 mm x 25mm complete all as specified on drawing or as directed by Engineer-in-charge.

Removing the existing unserviceable front frame and providing new first class hard wood front frame of size 575mm 510mm x 25mm x 55mm including drilling holes @ 12.5 mm C/C complete all as specified on drawing or as directed by Engineer-in-charge.

Removing the existing unserviceable front/back rail and providing new first class hard wood front rail of size 510mm x 55mm x 25mm complete all as specified on drawing or as directed by Engineer-in-charge.

Removing the existing unserviceable side rails and providing new first class hard wood side rails of size 775mm x 70mm x 40mm complete all as specified on drawing or as directed by Engineer-in-charge.

Recaning of repaired chair easy seat and back of approved quality white or cream ivory with 1.80 x 0.46 mm cane and border with 3x0.60 mm cane complete all as specified on drawing or as directed by Engineer-in-charge. Make -Premier Plastic Industries/Garware Plastic Ltd/Maharashtra Plastic Cane Industry

Comman for all Chairs

M & L for fixing of PVC shoes superior quality of size 25mmx25mm dia with 30mm long screws in the following furniture items as specified & directed by Engr-in-charg.

SOFA SET SINGLE/3/5 PERSON WITH CUSHION : FD-281,1113

Replacement of existing U/S cushion of Sofa Set with new foam cushion of size 40 density 100mm thick duly covered with tapestry cloth including mulmul cloth and steching, rest all as shown on drg and as directed by Engr-in-Charge. Note :- (i) Each cushion for seat or back will be measured as single unit. (ii) The tapastry cloth shall be mat finish and rate of tapestry cloth shall not less than Rs. 450/- per Sqm and as approved by GE.

Removing the existing unserviceable front leg from Sofa and providing new leg of first class hard wood of size 70mm x 35 mm x 530mm, rest all as shown on drg and as directed by Engr-in-Charge.

Removing the existing unserviceable rear leg from Sofa and providing new leg of first class hard wood of size 70mm x 35 mm x 530mm, rest all as shown on drg and as directed by Engr-in-Charge.

Removing existing unserviceable Arm rest from Sofa and providing new arm of first class hard wood of size 35mm x 70mm x 725mm, rest all as shown on drg and as directed by Engr-in-Charge.

Removing existing unserviceable side rail from Sofa and providing new side rail of first class hard wood of size 35 mm x 100mm x 725mm, rest all as shown on drg and as directed by Engr-in-Charge.

Removing existing unserviceable bearers from Sofa and providing new bearer of first class hard wood of size 40mm x 40mm x 725mm, rest all as shown on drg and as directed by Engr-in-Charge.

Removing existing unserviceable battens from Sofa and providing new bateens of first class hard wood of size 50mm x 20 mm, rest all as shown on drg and as directed by Engr-in-Charge.

Removing existing unserviceable front rail from Sofa three seater and providing new front rail of first class hard wood of size 35mmx 100mm x 1590 mm, rest all as shown on drg and as directed by Engr-in-Charge.

Removing existing unserviceable front rail from Sofa single seater and providing new front rail of first class hardwood of size 35mm x 10mm x 530 mm, rest all as shown on drg and as directed by Engr-in-Charge.

CHARPOY GI PIPE WITH PLYWOOD TOP : FD-220

M& L for replacement of unserviceable plywood and long nuts,bolts and washers from GI Charpoy. Supply and fix 12mm thick plywood BWR plywood to confirm IS-303 with 10 Nos of 4mm dia 65mm long nuts,bolts and washers including replacement of old cap with new steel cap at the bottom of legs of Charpoy GI Pipe all as specifed and as directed by Engr-in-charge.Make-Century/Greenply/kitply .

S & F in repairs 32mm dia ISI medium grade of approved make, long rail for GI Chapoy pipe including removing unserviceable long rail, rest all as shown on drg and as directed by Engr-in-Charge.

Making short rail for GI Charpoy obtained from item No 22.02 above here-in-before cut in to lenth and threading including removing of existing unserviceable short rails all as specified and directed.

Making leg for GI charpoy from short rail obtained from item No 22.03 above here-in-before end threading other end provided with MNF clamp suitable for 19mm dia conduit pipe 3mm base plale welded at bottom and fixed in repairs as required as per drg.

S&F in repairs MS Check nuts, rest all as shown on drg and as directed by Engr-in-Charge. MS Check nut as per drg.

S&F in repairs new GI Elbow 32 mm dia three way medium grade, including removing of old GI Elbow rest all as shown on drg and as directed by Engr-in-Charge.

S&F new flat iron strip of size 35mm x 5mm as per drg including of old unsv strip of charpoy gi pipe with plytop.

FORM WITH BACK : FD-78

Removing of existing unserviceable seat and providing new seat of size 1800mm x 255mm x 25mm made out of 1st class hard wood, rest all as shown on drg and as directed by Engr-in-Charge.

Removing of existing unserviceable back and providing new back of size 1800mm x 155mm x 25mm made out of 1st class hard wood, rest all as shown on drg and as directed by Engr-in-Charge.

FORM WITHOUT BACK : FD-77M

Removing of existing unserviceable seat and providing new seat of size 1525mm x 255mm x 25mm of 1st class hard wood, rest all as shown on drg and as directed by Engr-in-Charge.

M&L preparation of old wood surfaces by scraping and filling bore holes with putty and finally rubbing with sand paper/ abbrasive cloth throughly for smooth and clean surface and applying two coat of french polish over a coat wax to the depressed surface for smooth finishing complete all as specified on drawing or as directed by Engineer-in-charge. for the following furniture articles:-

All as per items Srl No. 25.00 here-in-before but Bed Ply /Bed newar : FD-246/ 247

All as per items Srl No. 25.00 here-in-before Peg Table

All as per items Srl No. 25.00 here-in-before Stool Dressing : FD-281

All as per items Srl No. 25.00 here-in-before Table dressing Ladies with mirror : FD-251

All as per items Srl No. 25.00 here-in-before Table dressing Gents with mirror : FD-230

All as per items Srl No. 25.00 here-in-before Table bed side : FD-276

All as per items Srl No. 25.00 here-in-before Teapoy wooden : FD-278, FD-382

All as per items Srl No. 25.00 here-in-before Table dining 6/8 persons : FD-273

All as per items Srl No. 25.00 here-in-before Table centre : FD-274 / 235

All as per items Srl No. 25.00 here-in-before TABLE WRITING : FD-33/275

All as per items Srl No. 25.00 here-in-before Form with back wooden: FD-77M

All as per items Srl No. 25.00 here-in-before Chair Easy : FD-229

All as per items Srl No. 25.00 here-in-before Chair Writing: FD-280

All as per items Srl No. 25.00 here-in-before Chair Dining : FD-279

All as per items Srl No. 25.00 here-in-before Hat stand with mirror : FD-233

All as per items Srl No. 25.00 here-in-before Sofa set single seater : FD-281,1113

All as per items Srl No. 25.00 here-in-before Sofa set 5 seater : FD-281,1113

All as per items Srl No. 25.00 here-in-before Table 3'X2' without drawer : FD-231,284

All as per items Srl No. 25.00 here-in-before Sofa set 3 seater : FD-281,1113

Please Enable Macros to View BoQ information