Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹22.5 LAccepted-AOC 549 KATIWALA TANK INDORE M P 452001 | INDORE | INDORE | MADHYA PRADESH | 452001 | L-1 | Accepted-AOC Work awarded | |
| 2 | L-2₹22.9 L+₹36,072.60 (1.60%)Rejected-Finance AT KUCHANA POST KUCHANA TAH BHADRAWATI DISTRICT CHANDRAPUR MS 442503 | BHADRAWATI | CHANDRAPUR | MAHARASHTRA | 442503 | L-2 | Rejected-Finance Due to L-2 bidder. | |
| 3 | L-3₹29.5 L+₹6.9 L (30.8%)Rejected-Finance PADMALAYA VINAYAK LAYOUT TILAK WARD PWD ROAD WARORA DISTRICT CHANDRAPUR MS | WARORA | CHANDRAPUR | MAHARASHTRA | L-3 | Rejected-Finance Due to L-3 bidder. |
Tender Value
₹22.6 L
EMD Value
₹28,300
Closing Date
21 May 2025, 12:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Staff Officer (Civil), WCL, Majri Area.
At/Post Kuchana, Tahsil Bhadrawati, District Chandrapur (MS) 442503.
Construction of cement concrete road for 100 MT newly constructed weigh bridge of NMUG to OC Mine under New Majri Sub Area of Majri Area
2025_WCL_335020_1
ma9511-civ-e004-2025-26/74 Dated 06.05.2025
Open Tender
Civil Works - Others
Item Rate
90 days
New Majri Sub Area
Please refer Tender documents.
4 documents required · 4 mandatory
₹28,300
4 Jul 2025
6 May 2025
23 May 2025
7 May 2025
21 May 2025
7 May 2025
7 May 2025 - 14 May 2025
Amount
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge. All kinds of soil
Construction of granular sub-base by providing well graded material like natural sand crushed gravel or crushed stone having CBR >30, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator or plant mix method at OMC, and compacting with vibratory rollers of 80 to 100 kN static weight to achieve the desired density, complete as per Clause 401 of Specification. Plant Mix Method For Grading-I Material
Construction of granular sub-base by providing well graded material like natural sand crushed gravel or crushed stone having CBR >30, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator or plant mix method at OMC, and compacting with vibratory rollers of 80 to 100 kN static weight to achieve the desired density, complete as per Clause 401 of Specification. Plant Mix Method For Grading-II Material
Construction of dry lean cement concrete Subbase over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor,compacting with 8- 10 tonnes vibratory roller, finishing and curing as per clause 601 of specification complete in all respect.
Construction of un-reinforced, dowel jointed,plain cement concrete pavement M-40 grade, concrete over a prepared sub base with cement , coarse and fine aggregate conforming to IS 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, admixtures as approved, curing compound, finishing to lines and grades as per drawing as per IRC 15 2011 and as per relevant clauses of section 602 of specifications complete but including cost of steel in dowel bar and tie rods etc.
Total impact of GST for the purpose of CTC
RAJESH KUMAR SINGH (BID ID -1154825)
VINOD N MANIYAR (BID ID -1154820)
techsummary_347296.pdf
PDF • 0.45 MB
finsummary_347296.pdf
PDF • 0.58 MB
AOC-1568.pdf
PDF • 3.53 MB
BOQ Comparative Chart
xlsx • 0.01 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .