Development of Park at KWMC

Amount

Civil Works

Clearing scrub jungle and surface dressing of the ground. The rate including hire charges of all machineries, removing of all rubbish, lead upto 50 m, Transportation, and labour charges etc., complete complying with standard specification.

Dismantling the damaged Doors and windows including removal of frames, Hinges, fastenings etc., complete complying with standard specification and as directed by the Departmental officers.

Dismantling the damaged brick / stone masonry work in cement mortar and clearing away with carefully stacking the material useful for reuse for any thickness of wall under 3 m heights etc., complete complying with standard specification and as directed by the Departmental Officer.

Dismantling, Plain cement concrete and clearing away the same 50 m away from the site and roughening the surface etc., complete complying with standard specification and as directed by the Departmental officers.

Dismantling, removing and carefully stacking Reinforced cement concrete and clearing away the same 50 m away from the site and roughening the surface etc., complete complying with standard specification and as directed by the Departmental officers..

Earth work excavation for all foundations in all type of soils and sub soils to the required depth for Footings, plinth / grade beams, etc,. by mechinaries including manual excavation for the following type of soil / rock as per detailed specification. As per SS 20B as hard rock requiring blasting inclusive of shoring strutting and baling out water wherever necessary and including refilling 0 to 2.0m depth consolidation depositing the surplus earth in places shown clearing and leveling the site with an initial lead of 10 metre and lifts as specified hereunder etc., complete in all respects complying with relevant standard specification and as directed by the departmental officers.

Providing and constructing cast in situ hydraulic bored piles of specified diameter in M30 grade concrete using blended cement - slag cement with minimum cement content of 400kg/m³ in accordance with the structural engineers drawings and directions, but exculding reinforcement including cost of mobalization of all necessary plants, equipment's like piling rigs, temporary casing of appropriate length for setting out cardinal points and the removal of the same, boring in overburden, using bentonite mud circulation technique or any other method duly through all strata upto the foundation level of piles etc., complete all as approved by the departmental engineer. Further include dewatering, placing concrete by tremie pipe method, disposal of bored material outside the site. Including Chipping carefully cut off portion of piles as required without any damage to the piles and dressing the top and removing all the debris away from the site with out any extra cost as directed including the cost of all tools, plants, conveyance, all labour, lead and lift required etc .,Conducting standard penetration test to identify the refusal strata for atleast 1 pile in group and atleast 25% of piles, comparing with refusal strata as indentified in soil report and providing socketting into refusal strata by 1.00mt or into hard rock by 100% dia of the pile. (Length of pile for payment shall be measured up to bottom of pile cap).

Boring or chiselling through any obstacles, boulders, weathered rock, etc. Upto founding level of piles for seating resting or socketting of files. The rate quoted shall include demobilising the site with all plants, equipment, piling rigs, necessary personnel brought for piling work, including removal and transportation of debrise away as directed, cleaning and reinstating site to original condition as acceptable by the Architect on completion of piling work.

450mm Dia

Carrying out initial working pile load test on specified dia piles as specified in IS:2911 (Part 4). Includes all plant, equipment, machinery, instruments, measuring devices, platforms and kentledge pile caps etc., dismantling and carting away entire setup, excavation and dewatering etc., all complete.

450mm dia Safe vertical Load Capacity Test upto 37MT for upto 10Rmt

Carrying out Dynamic Initial vertical load test on Bored cast-in-situ pile as specified in ASTM D4945 for specified test loads. 450 mm dia Includes all plant, equipment, machinery, instruments, measuring devices, platforms and kentledge pile caps etc., dismantling and carting away entire setup, excavation and dewatering etc., all complete

Carting away surplus excavated earth available with in the campus is to be carted to a lead of within 10 KM from site. The rate shall include loading into the tipper/ lorry, transporting and unloading, leveling and the earth scooped by bulldozers grading etc.,complete with all respects complying with relevant standard specification, as directed by the Departmental Officers. Rate to include materials, loading, unloading, transportation, plant and machinery, hire and fuel charges for tools and plants and other incidental charges, royalties, seignorage and taking statutory approvals as necessary to carry out the work as complete with all respects complying with relevant standard specification, as directed by the Engineer-in-charge.

Supplying and Filling with M - sand in foundation and others sub structures for 100mm thick and well watered, rammed and consolidated by power compacter. The rate includes the cost of M sand, compacting with mechanical compactors, labour charges for leveling, loading & Unloading and Transportation charges etc., complete and as per the standard specification.

Supplying and filling approved RIVER SAND of specified quality for sand pits in play zone area. The rate including the cost of sand, labour charges,tools and tackles,royalties, transportation to site for all leads and lifts, loading, unloading, spreading in layer not exceeding 150 mm thick, watering, ramming, compacting with mechanical compactors and/ or other equipment to specified level all complete and as per the standard specification.

Providing two legged scaffolding using 15 cm dia casuarinas post of 4 M over all length (3 M Height + 0.5 M Projection + 0.5 M into the Ground) the distance between the two rows being 1.25 M and the spacing of posts being 2.0 M in both the rows with two horizontal posts with 0.5 M. Overlap on either side and braces at 2.0 M Center to center including longitudinal and transverse middle braces to step up and providing a platform with country wood planks of 40 mm thick and 1 M width, etc. in a complete from using coil and nails. The rate includes the cost of all materials, labour charges, loading & Unloading and Transportation charges etc., complete and as per the standard specification as directed by the Engineer-in charge.

For Initian height 3 M

For every additional height of 2.5 M Height taking into Consideration - 6 RM

Providing and laying plain cement concrete 1 : 4 : 8 ratio of (1 of cement , 4 of manufactured sand and 8 of graded stone aggregate 40mm nominal size) in foundation and basement including dewatering wherever necessary and laid in layers not more than 15 cm thick and consolidation etc. The rate includes the cost of materials, labour charges, lifting charges, loading & Unloading and Transportation etc., complete and as per the standard specification.

Construction of Granular sub-base of 100 mm compacted thickness ( Drainage Layer bottom most) by providing laying, spreading and compacting of Open graded Material conforming to Grading III of Table 400-1 of MORTH clause 401 ,mixing in a Wet Mix Plant of 200 tonne capacity at OMC, carriage of mixed material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory roller 8-10 tonne to achieve the desired density of 98% including protection of edges of GSB layer, cost of all materials, labour, hire charges of machinery, lighting, guarding, barricading, maintenance of diversion road, loading & unloading, all lead and lift etc., to achieve minimum CBR value of 30%(Compacted Thickness) in accordance with MORT&H technical specification clause No. 401 and with all other incidental charges and as per the direction of the Engineer-In-Charge of work.

Supplying and erecting centering for sides and soffits including supports and strutting up to 3.30 m height with all cross bracing for plane surfaces as detailed below, using mild steel sheets of 90 X 60 cm 10 gauge stiffened with MS angle of 25 X 25 X 3mm for boarding, laid over adjustable span & jacks and supported by 50mm dia pipes for general pipes scaffolding systems @ a spacing of 1.20m c/c and vertical connected at a height of 2.0m c/c including 'C' & 'U' clamps and base receiver cup at bottom for connecting pipes etc and removable systems etc., the rate including cost of all materials, labour charges, wastages, placing, transportation, lead & lifts, tools & plants, fuels, fixing in position at all levels, heights, masking tape in sheet joints, consumables, etc. as complete with all respects complying with relevant standard specification, as directed by the Engineer-in-charge.

For Plane surfaces such as RCC floor slab, roof slab, beams, lintels, bed blocks, landing slab, waist slab, portico slabs and beams, etc.

For Column footing, plinth / grade beam, bed blocks, template surfaces, steps, piers, raft slab / beams and such other members

For plane surfaces such as rectangular or square rcc columns, sunshades, top and bottom slab of rcc boxing, etc.

Supplying, fabricating and fixing in position of steel Fe 550 grade Reinforcement for all RCC work with Thermo Mechanically Treated Bars (TMT) conforming to IS 1786 of latest version according to drawings and binding the reinforcement with 18 gauge double fold GI binding wire and providing Concrete cover blocks to maintain the cover as required. The rate including cost of all materials, bending, tying grills, placing, transportation, lead & lifts, tools & plants, fuels, all materials, labour charges, wastages , laying at all levels, fixing in position, cost of cover blocks and GI binding wires etc. as complete with all respects complying with relevant standard specification, as directed by the Engineer-in-charge.

Providing and Laying M 30 Design Mix for all reinforced cement concrete with minimum cement content conform to IS 456-2000 using ordinary Portland cement of grade 53 from approved manufacturer, manufactured sand, 20 mm and down graded size coarse aggregates, necessary approved admixtures as per requirement. works for Footings, Grade beam, drain wall & raft , Plinth beams, Column, Grade slab, Roof slab & beam, Column drops, Pergola, Staircase waist and landing slab lintel, Sunshades, parapet Cum drops, Steps, canopy, window boxing slab, Loft, fins facia Planter box, machine foundation, elevation features and other similar structures etc..excluding necessary centering, shuttering and reinforcement which shall be measured and paid separately under relevant items.

The rate including cost of all designing the mix, batching plant, mechanical mixing, transporting and placing at all levels, leads, lifts, tools & plants, fuels, all materials, labour charges, wastages , laying, pumping the concrete to all levels, providing sleeves / openings in RCC slabs, compaction by vibrator, gunny bags for curing etc. as complete with all respects complying with relevant standard specification, as directed by the Engineer-in-charge

Designing, Providing and fixing in position Hot rolled structural steel Members / Sections consists of MS joists, channels, angles, purlins, pipes, hollow tubes, runners, insert plates, flats etc. at all levels. Surface preparation of all MS members by Sand blasting to SA 21/2 grade and painted with anti corrosive, low VOC PU paint (metallic finish) with compatible primer to a minimum film thickness of 75 microns and 2 coats of low VOC PU paint of Akzonoble make and total dry film thickness 225 microns. (Only Main structural supports related to Facade works if required any shall be considered and no base frame or support structure shall not be considere, which shall form part of the respective cladding and Glazing items). Refer Particular Specification for Mode of measurement for this item.

Supply and constructing cement concrete solid block masonry work at all levels in cement mortar 1:5 (1 of Cement : 5 of manufactured sand ) using Portland Pozzolana Cement standard size of 400 x 200 mm and 200 mm thick of solid cement concrete with minimum compressive strength of 5 N/Sq.mm.conforming to IS 2185 or equivalent BS and Fly ash conforming to IS : 3812 (Part III)-1966* may be used for part replacement of fine aggregate up to a limit of 20 percent complete and as directed. Concrete blocks manufactured under strict quality control conditions using modern rugged block casting and stripping machine with the latest moulding techniques etc,. only shall be used. Rate to include all materials, labour charges, wastages for working at all levels with necessary lead and lifts, transportation charges, loading, unloading, scaffolding, staging, curing, fuel, consumables as complete with all respects complying with relevant standard specification and as directed by the Client / Engineer-in-charge.

Supply and constructing cement concrete solid block masonry work at all levels in cement mortar 1:5 (1 of Cement : 5 of manufactured sand ) using Portland Pozzolana Cement standard size of 400 x 100 x 200 mm of solid cement concrete blocks, with minimum compressive strength of 5 N/Sq.mm.conforming to IS 2185 or equivalent BS and Fly ash conforming to IS : 3812 (Part III)-1966* may be used for part replacement of fine aggregate up to a limit of 20 percent. Concrete blocks manufactured under strict quality control conditions using modern rugged block casting and stripping machine with the latest moulding techniques etc. only shall be used. The rate including cost of all materials, labour charges, wastages for working at all levels with necessary lead and lifts, transportation charges, loading, unloading, scaffolding, staging, curing, fuel, consumables as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge.

Plastering of 12 mm thick for Internal walls with cement mortar 1:5 (1 of cement : 5 of manufactured P sand) according to specifications. Rate shall include for providing GI mesh of nominal thickness at the junctions of masonry and concrete works to a width of 100 to 125mm including tying in position with suitable clamps/screws. The rate including cost of all materials, labour charges, wastages with necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, preparation of surface, ncessary haccking in RCC surface, scaffolding, stagging, tools and plants, fuel, curing, cleaning, consumables etc as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge.

Plastering 15 mm thick for external surfaces with Cement Mortar 1:4 (1 of cement : 4 of manufactured P sand) with water proofing compound of “CICO No.1 or equivalent“ as per Manufacturer's Specification with sponge finish (washed sand finish) all complete as per specification and as directed. The rate including cost of all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, preparation of surface, ncessary haccking in RCC surface, scaffolding, stagging, providing drip bands, moulds, grooves to any size and shape as shown in drawings tools and plants, fuel, curing, cleaning, consumables etc as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge.

Plastering 10 mm thick for ceiling including slabs, beams and column drops and staircase waist slab, sunshade, drops, chajjas etc..with Cement Mortar 1:3 (1 of cement : 3 of manufactured P sand) according to the specification. The rate including cost of all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, preparation of surface, ncessary haccking in RCC surface, scaffolding, stagging, providing drip bands, moulds to any size and shape as shown in drawings tools and plants, fuel, curing, cleaning, consumables etc as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge.

Painting new iron works such as steel doors, windows, ventilators, window grill bars, balustrades etc., with two coats of approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors including cost of priming coat etc., complete complying with standard specification. The make quality and colour of paint should be got approved by the executive Engineer before use on works. The rate including cost of all materials, brushes, ladder, scrapping, washing, labour charges, wastages for cleaning, scaffolding, stagging, working at all levels and transportaion charges etc., complete with relevant standard specification and as directed by the Engineer-in-charge.

Supply and painting of two coats of Acrylic emulsion paint of approved shade and colour over one coat of DCP Primer including one coat of Acrylic Wall Putty with DCP Primer. The rate including cost of all materials, brush, roller, ladder, scrapping, washing, materials, labour charges, wastages , cleaning, necessary lead and lifts, scaffolding, stagging, working at all levels, elevations, transportaion charges, loading, unloading, curing, sanding, touchup putty, surface thoroughly cleaned and wetted before painting as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge.(Internal surface)

Supplying and painting of 2 coats of weather proof exterior emulsion with high sheen, anti algal properties over one coat wall exterior primer of approved quality and shade etc., complete. The rate including cost of materials, brush, ladder, scrapping, washing, materials, labour charges, wastages , cleaning, necessary lead and lifts, scaffolding, stagging, working at all levels, elevations, transportaion charges, loading, unloading, curing, sanding, touchup putty, surface thoroughly cleaned and wetted before painting as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge.

Supplying And Fixing of Rubber Moulded Grey Premium Concrete Kerb of Size 450X125X300mm Using M30 Concrete. The Concrete Shall Be Moulded By Table Mount Vibrated With Polypropylene Fibers at 5% And Curing Compound. The Rate Shall Include Cost of Materials, Transportation, Loading & Unloading Charges and including Necessary Earth Work Pointing With cm. 1:3 To Full Depth Curing Thread Lining etc., completed as standard specification and as directed by the engineer-in-charge.

Supplying and fixing Dadooing the wall with ceramic tiles of approved quality, colour and design joint free of size 600x300x10mm thick of approved make, in all floors over a base layer of cement mortar 1:2 (one cement: Two sand) 10mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40 kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications. The rate including cost of all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, the same before handing over as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge.

Supplying and laying of Ceramic tiles of size 305 x 305 x 6mm for flooring approved make and quality with plain/colour with base mortor in CM 1:3, 10mm thick and pointing with white cement by adding suitable colour pigments including finishing, jointing and polishing with neat finish etc., complete. The rate including cost of all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, the same before handing over as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge.

Supply & Laying flooring with best quality materials of Machine Polished Granite Slab not less than 18 mm thick (Jet Black) of size not less than 1200 X 600mm machine cut and set in CM 1:4 20 mm thick topped white cement slurry (for surface contact of the bottom of the slab as per approved pattern including the finish joints with matching shade cement slurry cutting edge chamfering and polishing rough medium nice and tin oxide polish. Rate including all materials, labour charges, wastages, necessary lead and lifts working at all levels, transportation charges, loading, unloading, preparation of surfaces necessary hacking in RCC surfaces, cutting to required shape, edges, tools and plants, curing, cleaning, acid wash over finished surface protection with Gypsum / pop layer over plastic sheet and removing the same before handing over as complete with all respect complying with relevant standard specification and as directed by the Engineer in charge

Supply and laying with best quality the following materials of Machine Polished granite slab for wash basin counter top of not less than 18 mm thick (Jet Balck) including cutting for wash basin and edge polishing to be set in CM 1:4 (1 of cement : 4 of manufactured sand) 20 mm thick including finishing the joints with white cement slurry, cutting, edge chamfering to approved shape and polishing rough, medium, nice and tin-oxide polish. The rate including cost of all materials, labour charges, wastages, necessary lead and lifts working at all levels, transportaion charges, loading & unloading, preparation of surface, ncessary haccking in RCC surface, cutting to required shape, edging, tools and plants, fuel, curing, cleaning, acid wash over finished surface, protection with Gypsum / Pop layer over plastic sheet and removing the same before handing over as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge.

Supply & Laying with the best quality approved kotta stone slab not less than 20mm thick and the size of slab in general not less than 1200 X 600 mm machine cut and machine high pre - polished set in C.M 1:4 20 mm thick with white cement slurry for surface contact of the bottom of the kotta slab as per approved pattern / design as per the drawings by using irrespective of size and shapes including finishing the joints with white cement slurry, cutting, edge chamfering and polishing rough, medium, nice and acid wash and tin - oxide polish. Rate including all materials, labour Charges, wastages, Necessaryleads & lifts working at all levels, transportation charges, loading and unloading, preparation of surfaces, necessary hacking in RCC surfaces, cutting to required shape, tool and plants, fuel, curing, cleaning acid wash over finished surfaces, protection with Gypsum / Pop layer over plastic sheet and removing the same before handing over as complete with all respects complying with relevant standard specifications and as directed by the Engineer in Charge

Supplying and laying precast concrete Rubber Moulded hydraulically pressed paver blocks 63mm thick of made from M40 concrete. The rate including Cost of Paver Blocks, transportation of the blocks to the site, preparation of surface including supplying and filling with manufactured sand to 50 mm thick, levelling and compacting with plate vibrator and laying of the rubber moulded paving blocks with sand binding and final compaction with plate vibrator of 3 tonne capacity finishing the surface including cutting of blocks at the edges including all labour, materials, transportation, shifting etc., complete, as directed by the Engineer-in-charge.

Supplying and laying precast concrete Rubber Moulded hydraulically pressed paver blocks 83mm thick of made from M40 concrete. The rate including Cost of Paver Blocks, transportation of the blocks to the site, preparation of surface including supplying and filling with manufactured sand to 50 mm thick, levelling and compacting with plate vibrator and laying of the rubber moulded paving blocks with sand binding and final compaction with plate vibrator of 3 tonne capacity finishing the surface including cutting of blocks at the edges including all labour, materials, transportation, shifting etc., complete, as directed by the Engineer-in-charge.

Supplying and installation of EPDM (Ethylene Propylene Diene Monomer) of size 15mm thick (9mm SBR +6mm EPDM) SBR Rubber base layer which is mixed with polyurethane binder used 15% in base and top layer is pure EPDM granules mixed with polyurethane binder used 20% in top layer with proper laying materials of approved sample as per design / drawing levelling to required slope and finishing neatly. The rate including cost of all materials, placing at all levels, leads, lifts, tools & plants, labour charges for laying, transportation charges, wastages, loading & unloading and all incidentals etc. complete complying with relevant standard specification and as directed by the Engineer-in-charge.

Providing and Laying Pigmented Plain Cement Concrete of M 20 Design Mix with minimum cement content confirm to IS 456-2000 using ordinary Portland cement of grade 53 from approved manufacturer, manufactured sand, 20 mm and down graded size coarse aggregates, necessary approved admixtures as per requirement. works for outdoor and indoor flooring and other similar areas etc..excluding necessary shuttering which shall be measured and paid separately under relevant items.The rate including cost of all designing the mix, batching plant, mechanical mixing, transporting and placing at all levels, leads, lifts, tools & plants, fuels, all materials, labour charges, wastages , laying, pumping the concrete to all levels, providing grooves / openings in PCC floors, compaction by vibrator, gunny bags for curing etc. as complete with all respects complying with relevant standard specification, as directed by the Engineer-in-charge

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete

Painting the Art work in the existing plastered / RCC surface wall as per the direction of department official, using Oil paiting with first class quality and approved colour over one coat of primer with thorough scrapping clean removal of dirt.,etc., complete, The rate including Cost of all amterials, one coat of primer, necessary plaster of paris, putty, brushes, scaffolding, labour charges and Transportation charges etc., complete with relevant standard specification as dircted by the Engineer-in-charge.

Fabricating Supplying and fixing in position of Aluminium anodised natural colour matt finish of Double leaf fully glazed Door shutters with 5.50 mm thick glass.The outer frame shall be with aluminium box section 101.60x44.45x3.18mm @ 2.319kg/m and Shutter frame made of section with Vertical & Top rail: 50x44.45x2.50mm @1.292 kg/m, Bottom rail: 100x44.45x2.50mm @ 1.974 kg/m, Lock rail : 50x44.45x2.5mm @ 1.292 kg/mAlu. Clips: 17.15x17.27x1.50mm @ 0.176 kg/mAlu. Handle: 100x30mm @ 0.988 kg/m and necessary accessories such as Alu. clips rubber beading, full length of handles on both sides, lock, furniture fittings such as, Hinges, Automatic door closer, rubber bush, stopper including cost of materials, labour charges and power consumption charges required for fabrication including chipping, dismantling and making hole to the reuired extent in RCC column, beam masonry with power drill wherever necessary and redoing the damaged portion to the original condition after fixing etc. complete. All the Alu. Section are to be anodised with matt finish under electrically controlled condition in accordance with IS 1868/1962 for an average anodic film thickness of 15 microns etc., complete with standard specification as directed by the Engineer-in-charge.

FOAMED PVC DOOR FRAME Specification: Providing factory made pre-laminated FPVC (Formed Polyvinyl Chloride) Door Frame of the size 105 x 40mm with a wall thickness of 10mm made out of extruded rigid FPVC profile mitre joined with 6 Nos. of 5mm long screw. The door frame shall be fixed to the wall by using 80mm long screws through the frame with the help of PVC fasteners of 3 Nos. to be provided for each vertical member, GI stiffeners of ('U' channel of size 29 x 9, 1mm, 150mm long) - 3 Nos. at hinge point, frame reinforcement of ('U' GI channel of size 46 x 22 x 0.6mm), bottom tie rod of ('U' GI channel size of 15 x 15 x 1mm), etc., complete complying with the standard specification. The door frame should be got approved from the Executive Engineer before use on work

Providing of 35mm thick factory made pre-laminated ABS(Acrolynitrile Butadiene Styrene) Door Shutter moulded indifferent designs, consisting of all round frame made out of water proof solid foam PVC bar of size 20 x32mm, reinforcedby 32 x 32mm - 2 Nos., for vertical made out of LVL(Laminated Veneer Lumber), core material of 32mm thickhigh density craft paper honey comb board, sandwiched onboth sides with pre-laminated ABS sheet thickness of 1.5mm.PVC edge banding of size 0.45mm on the vertical sides.Hardware made out of steel coated butterfly hinges - 3 Nos.,for each shutter and ISI make SS round lock complete forfinished item of work, complete complying with the standardspecification. The door shutter and frame should be gotapproved from the Executive Engineer before use on work

Door size 900mm x2100mm

Door size 750mm x 2100mm

Supplying , fabricating and fixing in position Aluminium Anodised natural colour mat finish Three track sliding window in all floors with Aluminium sections of Outer Frame bottom [email protected] kg/m,Top & vertical 92.34x29.70x1.50 at 1.066 kg/m, Shutter vertical 39x20x1.50 at 0.493 kg/m,Top & Bottom 18x36.6x1.50 at 0.439 kg/m,Vertical locking arrangement 28.94x39x1.50at0.632 kg/m, the follwing sizes with necessary accessories such as rubber beadings, special hinges, lock, handle including supplying and fixing 4mm thick plain glass including cost of all materials , labours, power consumption required for fabrication , drilling holes in RCC colunm, slab, masonry walls wherever necessary with power drills to the required extent and make good to the original condition after fixing and also as directed.The aluminium sections are to be anodised with matt finish under electrically controlled in accordance with IS 1868 / 1962 for an average anodic film thickness 15 microns etc., complete with standard specification as directed by the Engineer-in-charge.

Supplying, fabricating and fixing inposition Aluminium anodised natural colour matt finish louvered ventilator size 600mm x 600 mm of with outer frame section with 62x38x2mm at 1.174 kg/m and the louvered with moving arrangements made with aluminium channel of size 60x30x4mm @ 1.274 kg/m ALuminium clips 19.05x17.27/ 11.05x0.075mm @ 0.169kg/m with necessary 4mm thick plain glass panel for louvers including cost of all materials, labour and power required for fabrications, chipping dismantling making holes in RCC, masonry and made good to the original condition after fixing etc., complete. The Aluminium surface is to be anodised with matt finish under electrically controlled condition in accordance with ISI specification 1868/1962 for anodic film thickness of notless than 15 Microns,etc., complete with standard specification as directed by the Engineer-in-charge.

Providing and fixing welded MS grills to the window openings,gates and angles for kiosks along the details as per drawing with necessary screws , bolt, and fixed with necessary MS lugs embedded in masonry with C.C 1:2:4 and finishing the surface neatly rate shall include wlding and consumables etc., complete as directed. Design of grills and the size of members to be used shall be got approval before put into use & as directed by client / Engineer incharge.

Providing and fixing welded MS sheets of size 6 mm to the wending kiosks skins along the details as per drawing with necessary screws , bolt, and fixed with necessary MS lugs embedded in masonry with C.C 1:2:4 and finishing the surface neatly rate shall include wlding and consumables etc., complete as directed. Design of grills and the size of members to be used shall be got approval before put into use & as directed by client / Engineer incharge.

Providing the best range of public waiting chair, fort multi seater (powder coated), 3 seater stainless steel, stainless steel two seater waiting chair and stainless steel 1 seater waiting chair Size 1750 x 740x910 mm. & 2380 x 690 x 800 mm.

3 seater

4 seater

Supply and fixing of Water CO2 stored Pressure Type 9 liters capacity Fire Extinguisher as per new IS 15683 complete with control valve, gun metal cap, pressure gauge, operation sticker, discharge hose, wall mounting bracket, safety clip, etc., as directed by the Departmental Officers.

Supply and fixing of stored pressure ABC (Mono Ammonium Phosphate) Powder Type Fire Extinguisher of 6 kg. capacity as per IS:15683 with pressure gauge, discharge hose & control nozzle, wall mounting bracket, safety clip etc., Including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary etc, complete as per standard specification and as directed by the Departmental Officers. Make: EXCELLENT / SAFETY / FIRST / EQUIVALENTBD

Supply and fixing of 120 litre Heavy duty trash can with specially designed bottom for minimizing the breakage and UV protested colour from sun rays. The trash can is fitted with wheel at bottom for easy mobility. The strong lid with smooth curved upper surface for perfect fit to ensure preventing unwanted smells to escpae and rain water to seep through. The rate is incclusive of transportation, loading and unloading charges.

Supply of compactor 1000 litres bin made of galvanized sheet, thickness of 2.5mm, side and bottom 3,, MS angle and MA channel and 8" heavy duty fibre wheel as directed by the department officers. The cost includes the labour charges, transportations all complete as per Engineer in charge

Providing And Fixing of Retro Refelctorised Cautionary,80 cm X 60 cm Rectangular Mandatory And Informatory Signs (Without Definition Board) Made Out of High Intensity Prismatic Grade Sheeting Conforming to Type – Iv Standards of Irc 67 . 2012 And Astm D 4956 – 09, Specification And Fixed Over 2mm Thick Aluminium Sheet Fixed Over a Back Supporting Frame of 25mm X 25mmx3mm. Mild Steel Angel And Supported On A Mild Steel Angel Post 75X75X6mm With A Clear Height of Not Less Than 2.10M From The Ground Level To The Bottom of The Sign Board And 0.60M Below Ground Level. The Sign Post Should Be Painted As Per Irc 67-2012 And Firmly Fixed to The Ground By Means of Properly Designed Foundation With M15 Grade Cement Concrete 45mmx45cmx60cm Size Including Cost And Conveyance of All Materials, Equipment, Machinery And Labour With All Leads And Lifts, Loading Charges Necessary For Satisfactory Completion of The Work As Directed By The Engineer In Charge. High Intensity Retro – Reflection Sheet Shall Consist of Minimum Coefficient of Retro- Reflection As Per Table 6.6 of Irc 67X2012. The Retro Reflection Sheeting Shall Be Covered Under 7 Years Warranty Issued For Field Performance And A Certified Copy of Three Years Outdoor Exposure Report Shall Be Obtained As Per Irc 67-2012 (As Per Mort&H Specification No.801)

Gym Equipments

Supply and fixing of GM 132 Elliptical chin up as per manufacturer's specifications. The rate including cost of all materials, placing at all levels, leads, lifts, tools & plants, fixing, labour charges, Transportation etc., complete with relevant standard as directed by the Engineer-in-charge.

Supply and fixing of GM 139 Air swing as per manufacturer's specifications. The rate including cost of all materials, placing at all levels, leads, lifts, tools & plants, fixing, labour charges, Transportation etc., complete with relevant standard as directed by the Engineer-in-charge.

Supply and fixing of GM 129 push up dip station as per manufacturer's specifications. The rate including cost of all materials, placing at all levels, leads, lifts, tools & plants, fixing, labour charges, Transportation etc., complete with relevant standard as directed by the Engineer-in-charge.

Supply and fixing of GM 127 Air walker on as per manufacturer's specifications. The rate including cost of all materials, placing at all levels, leads, lifts, tools & plants, fixing, labour charges, Transportation etc., complete with relevant standard as directed by the Engineer-in-charge.

Supply and fixing of GM 133 cycle on as per manufacturer's specifications. The rate including cost of all materials, placing at all levels, leads, lifts, tools & plants, fixing, labour charges, Transportation etc., complete with relevant standard as directed by the Engineer-in-charge.

Supply and fixing of GM 134 Chest press as per manufacturer's specifications. The rate including cost of all materials, placing at all levels, leads, lifts, tools & plants, fixing, labour charges, Transportation etc., complete with relevant standard as directed by the Engineer-in-charge.

Supply and fixing of wall climbers made of FRP as per manufacturer's specifications. The rate including cost of all materials, placing at all levels, leads, lifts, tools & plants, fixing, labour charges, Transportation etc., complete with relevant standard as directed by the Engineer-in-charge.

Supply and fixing of See saw SS029 as per manufacturer's specifications. The rate including cost of all materials, placing at all levels, leads, lifts, tools & plants, fixing, labour charges, Transportation etc., complete with relevant standard as directed by the Engineer-in-charge.

Supply and fixing of web climbers CL114 as per manufacturer's specifications. The rate including cost of all materials, placing at all levels, leads, lifts, tools & plants, fixing, labour charges, Transportation etc., complete with relevant standard as directed by the Engineer-in-charge.

Supply and fixing of Jungle climbers as per manufacturer's specifications. The rate including cost of all materials, placing at all levels, leads, lifts, tools & plants, fixing, labour charges, Transportation etc., complete with relevant standard as directed by the Engineer-in-charge.

Supply and fixing of slide 12 feet as per manufacturer's specifications. The rate including cost of all materials, placing at all levels, leads, lifts, tools & plants, fixing, labour charges, Transportation etc., complete with relevant standard as directed by the Engineer-in-charge.

Supply and fixing of SW049 Seater swing (8.5 ft Chain W/S) as per manufacturer's specifications. The rate including cost of all materials, placing at all levels, leads, lifts, tools & plants, fixing, labour charges, Transportation etc., complete with relevant standard as directed by the Engineer-in-charge.

Landscape Works

Supplying and Stacking of red earth at site to the departmental guage for Premeasurements which is of light textured, crystalline, porous and firable and not of generally acidic or neutral but not of alkaline and should not of alkaline and shoulde be fertile. The rate including seignior age charges, cost of red earth, transportation, loading & unloading, stacking etc., complete and as directed by Engineer-in-charge.

Supply of well decomposed farm yard Manure in a powdery form devoid of soil sand, stones, plastics and other materials highly nutrient and which supports plant Growth. The rate including cost of Manure, transportation, loading & unloading, stacking etc., complete and as directed by Engineer-in-charge

Mixing charges of red soil, sand and manure uniformly (1:1:1) for preparation of soil Mixture (excluding material cost). The rate including labour charges for measuring and mixing charges etc., complete and as directed by Engineer-in-charge.

Spreading of red soil, gravel or sand including watering and rolling which hand roller for every 75 mm thickness. The rate including cost of hire charges for roller and labour charges for Spreading of redsoil etc., complete and as directed by Engineer-in-charge.

Supplying and Planting Truffing of Korean grass / mexican grass including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc.,The rate including labour charges for measuring and mixing charges etc., complete and as directed by Engineer-in-charge.

Supplying and Planting of Heliconium foliage shrub variety of height 1' to 2' feet with necessary earth work excavation of size 300 X 300 mm and 300mm depth, the excavated pit is to be filled with red earth, sand and manure mix ratio of 2:1:1 ( 2 Part of red earth, 1 part of sand and 1 part of manure) up to 300 mm depth after planting the tree. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting of Hemelia pattens foliage shrub variety of height 1' to 2' feet with necessary earth work excavation of size 300 X 300 mm and 300mm depth, the excavated pit is to be filled with red earth, sand and manure mix ratio of 2:1:1 ( 2 Part of red earth, 1 part of sand and 1 part of manure) up to 300 mm depth after planting the tree. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting of Hibiscus hybrid foliage shrub variety of height 1' to 2' feet with necessary earth work excavation of size 300 X 300 mm and 300mm depth, the excavated pit is to be filled with red earth, sand and manure mix ratio of 2:1:1 ( 2 Part of red earth, 1 part of sand and 1 part of manure) up to 300 mm depth after planting the tree. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting of Nerium oleander foliage shrub variety of height 1' to 2' feet with necessary earth work excavation of size 300 X 300 mm and 300mm depth, the excavated pit is to be filled with red earth, sand and manure mix ratio of 2:1:1 ( 2 Part of red earth, 1 part of sand and 1 part of manure) up to 300 mm depth after planting the tree. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting of Schefflera variated ornamental foliage shrub variety height 1' to 2' feet with necessary earth work excavation of size 300 X 300 mm and 300mm depth, the excavated pit is to be filled with red earth, sand and manure mix ratio of 2:1:1 ( 2 Part of red earth, 1 part of sand and 1 part of manure) up to 300 mm depth after planting the tree. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting of Song of India Plant ornamental foliage shrub variety of height 1' to 2' feet with necessary earth work excavation of size 300 X 300 mm and 300mm depth, the excavated pit is to be filled with red earth, sand and manure mix ratio of 2:1:1 ( 2 Part of red earth, 1 part of sand and 1 part of manure) up to 300 mm depth after planting the tree. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge..

Supplying and Planting of Tecoma capensis foliage shrub variety of height 1' to 2' feet with necessary earth work excavation of size 300 X 300 mm and 300mm depth, the excavated pit is to be filled with red earth, sand and manure mix ratio of 2:1:1 ( 2 Part of red earth, 1 part of sand and 1 part of manure) up to 300 mm depth after planting the tree. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting of Raphis palm variety of height 6'-7' feet with necessary earth work excavation of size 600 X 600 mm and 750mm depth, the excavated pit is to be filled with red earth, sand and manure mix ratio of 2:1:1 ( 2 Part of red earth, 1 part of sand and 1 part of manure) up to 750 mm depth after planting the tree. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting of Syzygium cumini tree sapling of height 6'-8' feet with necessary earth work excavation of size 600 X 600 mm and 750mm depth, the excavated pit is to be filled with red earth, sand and manure mix ratio of 2:1:1 ( 2 Part of red earth, 1 part of sand and 1 part of manure) up to 750 mm depth after planting the tree. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Planting of Shade grass including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Planting of Wedelia trilobata foliage Ground cover variety in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of sapling at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in?charge.

Planting of Jetropha Plant foliage shrub variety of height 30-45 cm in polythene variety of height 30-45 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Supplying and Planting of Bauhinia purpurea tree sapling of height 180 - 240 cm in polythene bag of size 15x16 inch including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation,stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in charge.

Supplying and Planting of Peltophorum tree sapling of height 180 - 240 cm in polythene bag of size 15x16 inch including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Supplying and Planting of Plumeria tree sapling of height 240 – 300 cm in polythene bag of size 20x21 inch including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge

Supplying and Planting of Spathodea campanulata tree sapling of height 180 - 240 cm in polythene bag of size 15x16 inch including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site incharge.

Supplying and Planting of Ficus bengalenisis tree sapling of height 180 - 240 cm in polythene bag of size 15x16 inch including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Supplying and Planting of Neem tree sapling of height 180 - 240 cm in polythene bag of size 15x16 inch including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Supplying and Planting of Pungam tree sapling of height 180 - 240 cm in polythene bag of size 15x16 inch including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Supplying and Planting of Lagerstroemia tree sapling of height 180 - 240 cm in polythene bag of size 15x16 inch including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in charge

Supplying and Planting of shrubs( Carex "Light blight" / Golden sedge )with stalking including cost of the Plant, transport and labour charges etc all complete.

Supplying and Planting Pennisetum / Fountain grass with stalking including cost of the Plant, transport and labour charges etc all complete.

Supplying and Planting Alpinia purpurata / Red ginger plant with stalking including cost of the Plant, transport and labour charges etc all complete.

Supplying and Planting Canna Americannalis / Bengal tiger(variegated) with stalking including cost of the Plant, transport and labour charges etc all complete.

Supplying and Planting Techoma capensis / Cape honeysuckle with stalking including cost of the Plant, transport and labour charges etc all complete.

Supplying and Planting Hymaenocallis litorallis / Spider lilly with stalking including cost of the Plant, transport and labour charges etc all complete.

Supplying and Planting Jatropha multifida / coral bush with stalking including cost of the Plant, transport and labour charges etc all complete.

Supplying and Planting Russelia Juncea / firecracker plant with stalking including cost of the Plant, transport and labour charges etc all complete.

Supplying and Planting Cyathea arborea / Indian tree fern with stalking including cost of the Plant, transport and labour charges etc all complete.

Supplying and Planting Draceana draco / Dragon tree with stalking including cost of the Plant, transport and labour charges etc all complete.

Supplying and Planting Alpinia Purpurata / Red ginger plant with stalking including cost of the Plant, transport and labour charges etc all complete.

Supplying and Planting Caesalpinia pulcherrima / Dwarf Poinciana with stalking including cost of the Plant, transport and labour charges etc all complete.

Supplying and Planting Pentas lanceaolata / Dwarf Poinciana with stalking including cost of the Plant, transport and labour charges etc all complete.

Supplying and Planting Crinum asiaticum red / Giant Crinum with stalking including cost of the Plant, transport and labour charges etc all complete.

Supplying and Planting Felicium decipens / fern tree with stalking including cost of the Plant, transport and labour charges etc all complete.

Supplying and Planting Calathea lutea / Cuban sugar with stalking including cost of the Plant, transport and labour charges etc all complete.

Supplying and Planting Cyperous alternifolious / umbrella palm with stalking including cost of the Plant, transport and labour charges etc all complete.

Supplying and PlantingTerminalia mantally / madagascar almond with stalking including cost of the Plant, transport and labour charges etc all complete.

Supplying and Planting Filicium deciphens / Japanese fern tree with stalking including cost of the Plant, transport and labour charges etc all complete.

Supplying and Planting Antheocephalus cadamba / Burflower tree with stalking including cost of the Plant, transport and labour charges etc all complete.

Supplying and Planting Samanea saman / Rain tree with stalking including cost of the Plant, transport and labour charges etc all complete.

Supplying and Planting Alstonia scholaris / devils tree with stalking including cost of the Plant, transport and labour charges etc all complete.

Supplying and Planting Butea monasperma / Flame of forest with stalking including cost of the Plant, transport and labour charges etc all complete.

Supplying and Planting Plumeria Rubra / Frangipani with stalking including cost of the Plant, transport and labour charges etc all complete.

Plumbing Works

Sanitary Installations

Supply and fixing in position white European Water Closet of approved make with low level flushing tank 10 litre capacity of best quality and approved make with 100mm P or S trap with double flapped rigid PVC seat cover with CP brass hinges etc. complete complying with standard specification and as directed by the Departmental officers (The EWC should be got approved by the Executive Engineer before use on works.

Supplying and fixing in position Indian water closet of size 580 x 440mm, glazed earthern ware of approved quality and colour with 'P' trap or 'S' trap confirming to IS:2556-part XII with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One of Lime, Two of Sand, Five of Brick jelly) 100mm thick and by dismantling brick masonry, reinforced finishing to the required slope and including giving necessary connection to PVC soil pipes cement concrete roof / floor slab and making good the disturbed portion to origional condition without leakage etc., complete complying with standard specification and as directed by the departmental officers. (The water closet should be got approved by the Executive Engineer before use on works)

Supplying and fixing Oval Shape Wash Hand Basin of size 560 x 450mm with all accessories such as cast Iron Brackets, 32 mm Dia C.P. Waste coupling, Rubber plug and Chain, 32 mm dia ' B ' Class G.I. Waste pipe, 15 mm Dia G.M Wheel valve; 15 mm Dia Nylon connection, 15 mm Dia Brass Nipples, 15 mm C.P. Pillar tap etc.,including fixing the wash hand basin in the wall in position with a pair of C.I. brackets with teak wood plugs and screws and giving necessary water supply connection and as directed by the Department officers. (The Wash basin should be got approved by the Executive Engineer before use on works.

Supplying, Installing, Testing and Commisioning the best quality approved make of white glazed floor mounted european water closet with inbuild porcelin cistern 6/3 LPF and wash basin for physically challenge persons (hindware -matrix -70002)with necessary grap railes,hinged railes for support,pan connector bend ,checknut,stopcock etc,. colour solid seat and cover with polythene buffer and flap,CP flanges, CP bolts and nuts,brackets with nuts and boults wall flanges etc, complete ,wash basin shall include 15mm dia CP lever oprareted piller cock with waste coupling , 32mm dia CP bottle trap with extension pipe,supporting bracket with neccesary steel to support the basin 1 No,15mm CP angle valve with 450mm long CP connection pipe and CP wall flanges all of approved make etc., complete complying with standard specification and as directed by the department officers.the quality and mak of EWC & wash basin with full set should be got approved by the Executive Engineer before use on work.

Supplying and fixing Lipped Mouth Porcelain Flat Back Urinal(white colour) of size 26.5x31.5x44cm with all accessories such as 32mm dia Bell Mouth PVC Connection, 15mm dia GM Wheel Value, 15mm dia 'B' Class GI Waste Water Pipe, 15mm dia Nylon Connection, 15mm dia Brass Nipple, and suitable screws, shellac etc., complete. The rate including cost of all materials, labour charges for fixing and transportation etc. completed as directed by Engineer-in-Charge.

Supplying & fixing in position 15 mm dia brass/ C.P pillar tap (Heavy duty) of approved make conforming to I.S. Specifications & quality including cost of shellac, thread etc., complying with standard specifications & including cutting & threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the work).

Supplying and fixing of CP Two Way Bib Cock with Health Faucet ,wall hook & one metre long flexible tube including cutting and making good the walls wherever required etc complete. complying with standard specification and as directed by the Department officers. The quality and make of health faucet should be got approved by Concern department Engineer before use on work.

Supplying and fixing C.P. Robe hook fixing with necessary screws etc., complete. fixed on the toilet door complying with standard specification and as directed by the Department officers. The quality and make of coat hook should be got approved by Concern department Engineer before use on work.

Supplying and fixing Brass Chromium Plated Towel Rail 60cm long and 20mm dia with brackets of same materials including cost of teak wood plug & CP screws etc., complying with standard specification and as directed by the Department officers.

Supplying and fixing Brass Chromium Plated Soap Tray of size 150mm x 100mm using rawl plug & brass screws for fixing etc., complete complying with standard specification and as directed by the Engineer Incharge before use on work.

Supplying and fixing CP angle cock with wall flange including cutting and making good the walls wherever required etc., complete complying with standard specification and as directed by the Engineer Incharge before use on work.

Supplying and fixing in position Mirror of size 1000x780mm of approved quality and brand with necessary plastic back PVC frame with bottom stand using brass screws rawl plugs for fixing etc complete complying with standard specification and as directed by the Departmental officers. The colour of frame and quality of mirror should be got approved by the Executive Engineer before use on work

Supplying & fixing in position PVC Nahini / Floor trap of size 100x75mm including stainless steel gratings of approved brand & quality, fixed over a bed of brick jelly lime concrete 1:2:5 ( One part of lime, two parts of sand & five parts of 40 mm size brick jelly ) & finished with cement mortar 1:3 ( One cement & three sand ) including dismantling masonry works wherever found necessary & making good the damaged portions to the original condition & giving connections to the cast iron pipes etc., complete, complying with standard specification. (The PVC Nahini / Floor trap should be got approved by the Executive Engineer before use on works ).

Drainage works

Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Executive Engineer before use on works). Internal & External

Cost of 75mm dia

Cost of 110mm dia

Cost of 160mm dia

Supplying and fixing PVC cowl of following size to vertical Soil/Waste pipes above terrace level. The rate including cost of all materials, labour charges and transportation etc. completed as directed by Engineer-in-Charge.

75mm dia

110mm dia

Supplying & fixing in position 150 X 100 mm square mouth 'P' or 'S' trap stone ware Gully trap 'A' grade with cast iron double gratings of size 150 X 150 mm with C.I. air tight cover with frames of size 300 X 300 mm at bottom & top respectively with necessary earth work excavation, laid over a bed of brick jelly cement concrete 1:3:6, 150 mm thick using 20 mm size broken brick jelly including necessary brick work & plastering, &including dismantling masonry wherever necessary & redoing the damaged portions to the original condition & by using cement concrete 1:3:6 using 20 mm stone jelly for fixing the Gully trap & giving connections to the stone ware sewer line etc., complete, complying with standard specification. (The stone ware gully trap should be got approved by the Executive Engineer before use on works ).

600x600mmx 1000mm deep

900x 900mm x 1500mm deep

1200x 1200mm x 2000mm deep

Providing and laying non-pressure class NP2 RCC Spun pipes with collars including excavation of trenches in soil/murum/rock, laying the pipes as per layout and drawing, filling the joints with stiff mixture of cement mortar (1 part cement :1part fine sand) and jute, curing, testing the pipe and refilling the trenches in layers with due compaction & watering etc. completed as directed by Engineer-in-Charge.

200mm Dia

Making through holes in Plain or Reinforced Cement Concrete with Diamond Core Drilling System by using BOSCH power tools of following diameter in 150mm thick toilet floor slab

100mm Dia

150mm Dia

Construction of Rain water Recharge well (1200mm dia) as per consultant drawing with necessary connections, Earth work-digging the well for recharge well supply and installation of Reinforced concrete Rings -4 feet OD & 1 feet Height 75 MM Thick - 10 no's supply and installation of einforced concrete slab 4 feet in dia. 200 mm thick, and 25 mm perforated 8 mm mild steel rods used for reinforcement-1" Perforated - 1no's supply and installation of Reinforced concrete closing slab 75 mm thick, 8 mm mild steel rods used for reinforcement with 600mm x 600mm Square HEAVY DUTY PERFORATED manhole cover Filtration Media Installation For recharge Well Unit 40 mm crushed stones-0.5cum, 20 mm crushed stones- 0.5cum, Brick Bats-0.5cum,fine sand 0.5 cub mtr Mixture of Brick Bats Shifting of excavated earth to the approved/authorised dumping yard as directed by the authorities/Site in charge. Drilling a bore well-200mm dia by high speed compressor-4MTRS, supply and installation of 110mm PVC PIPE PN-6-4 rmtr, 110mm PVC PIPE PN-6 Perforated with 10 mm Zigzag holes to easy percolate the water-4 mtr, 12mm Gravel Packing between bore well hole and PVC pipe and Inserting into the Bore Well- 4 mtrs. supply and installation of 180GSM Gio-fabric sheet to cover V-Wire screen, supply and installation of V WIRE SCREEN- 0.75 mm Slots. SS-304 Material -0.5 mtrs Height 6" diameter Shifting of excavated earth upto 1000mtrs as directed by site in charge (the well sholud be got approved by the concern department Engineer before use on works)

Water supply

Supplying, laying and jointing CPVC pipes SDR 11(having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing CPVC specials using CPVC adhesives and fixing into wall with teak wood plugs, CPVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications. The CPVC pipes shall be got approved by Executive Engineer before use on works. Internal & Vertical

Cost of 80 mm dia UPVC pipe

Cost of 65 mm dia UPVC pipe

Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements). The valves to be used on work shall be got approved by the Executive Engineer before use on work.

Providing and placing on terrace PVC water tank, 1000 Liters with cover and suitable locking arrangement. The rate includes cost of tank, transportation charges and placing the tank in postion etc. complete and as directed by the Departmental officers.

Supplying and erecting in position of following liters capacity Industrial Model Reverse Osmosis Water-cum-Purifier to deliver Potable Water with World Health Organisation (WHO) Standards with following accessories. (a) MS Skid - 1 No. (b) Media 11054 No. Vessel with 20 nb Multiport Valve (with Media Pubble and Fine Sand and Activated Carbon Filling) set (c) Feed Pump 0.50 HP – 1 No. (d) Vertical Pump 2-9, 2.00 HP / Single Phase – 1 No. (e) Membrane 40 x 40 filmtech (or) equilaents / Osmonic (USA) - 1 No. and Membrane Pressure Vessel 40 x 40 -1 No. & Pressure Gauge - 2 Nos.(f) Flow Meter - 1 No. 20” Filter with Housing - 1 No., Low Pressure Switch - 1 No., Level Switch - 1 No. & Necessary CPVC Pipes and Fittings. The system shall be provide with Two Panel Control System with necessary Stainless Valves and Fittings and Float Control etc. The rate should be inclusive of all civil works, wherever necessary to install the System in position and intact. Capacity : 500 Litres

Drilling of 12" dia vertical borewell so as to have a finished size of 6" dia borewell in boulder area to any required depth as decided by the TWAD Board Officers including Transportation from one place to anothr place with in Tamilnadu State by direct or reverse rotary mud circulation method using Contractor's rig tools, fuel, labourers, bentonite mud and water required for drilling at the sit including construction of mud pit etc. using only calyx rigs.

Reaming from 200mm dia pilot bore upto 350mm dia bore as direct by the Engineer incharge up to 80mtr depth ending below ground level.

Supply and laying following dia PVC casing pipe with excise duty as per IS 12818 / 1992 1.1 (4,6,3),

200mm dia CS

200mm dia RS

150mm dia RS

Labour charges for inserting PVC casing pipes assembly (with slots or without slots) in the drilled hole including jointing the pipes with PVC couplers with cement paste etc., complete, supply and packing the annular space with pebbles of size and quality as approved by the Executive Engineer of Departmental officers.

200mm dia CS

200mm dia RS

150mm dia RS

Supplying and filling with river pebbles in annular space between bore and PVC pipe up to hard rock. upto 30m rock level

Charges for developing the borewell with air compressor of 300 CFM capacity (Minimum 8 Hours) including transportation labour and fuel charges for compressor as approved by the Executive Engineer of Departmental officers. and conducting yield test by 'V' notch method.

Design, Supply,Installation, Testing and Commissioning of Wall fountain with foam jet. The work contains a Four stage water fountain consist of 7.5 HP open well submersible monoblock pump 1 No with texmo make(three phase 2880 RPM-440V-5Z) and 4 way distribution box made off stainless steel as fixing four stage water crown hit center foaming jet nozzle with a size of 60mm diameter with brass and stainless steel. First stage of ring size is 10' dia circumference made of SS pipe with a diameter of 40mm including 75 Nos of small brass nozzils. The second one is a 5'ring size is a 40mm dia circumference made of SS pipe with 50 Nos of small brass nozzils. The third is a 40mm rings size is a 3' circumference made of SS pipe with 30 Nos of small Brass nozzils. The fourth stage constitutes a 60mm foaming jet nazzle 1 No. necessary pipes, fittings, control valves, necessary were mesh unit made of stainless steel with aluminium frame protection. The pump consisting of control panel with 40amps 40 poles isolators and a 40 amps 20 poles isolator earth unit and labour charges for pipe bending, drilling, threading and welding, professional charges for fountain erection, excluding civil work etc., complete and as directed by the Departmental officers

Supply ,erection and testing & commisioning of 3HP submersible pumpset in the to suit 200mm borewell of capacity of 4800 LPH @ 265Ft, max. total head of 280 Ft pumps fitted with bronze impellers and having delivery size of 40mm - 430V along with 3mts cable and manufactures standard control panel which is mandatory and as directed by the officer incharge and other required supporting items like SS hose nipple, nylon rope, clamps, bolt and nuts,GI nipple, 50mm dia HDPE hose of required length etc completed and as directed by the officer incharge.

Irrigation works

Pipe Works

Drip and accessories

Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Executive Engineer before use on works). Internal & External

Cost of 40mm dia

Cost of 50mm dia

Cost of 63mm dia

Cost of 90 mm dia

Drip and accessories

Flexible polyethelene irrigation pipe 16 mm dia / 2.5 / 1.1 - 1.4 mm CL - II. " Netafim " including installation charges

Supply of endcap, nipple, start nipple, rubber grommet 16 mm dia. "Netafim" including installation charges

Supply, fixing and commisioning of flexible, 16mm inline tube, Flat emitter with 30 cm spacing, Longer lateral run length with flow rate 4 lph, pressure rating 0.58 to 2.5 nar wall thickness of 1.2mm including 16mm Drip fittings like GTO, TEE, Elbow, Endcap & connectors.

Supply of Pressure compensated dripper with 2 / 4 / 8 LPH outlet flow. Rain Bird / Netafim make including installation charges.

Supply of Pressure compensated dripper with 2 / 4 / 8 LPH outlet flow. Rain Bird / Netafim make including installation charges.

Providing, fixing, Testing & Commissioning of PVC Ball valve with quarter turn including all necessary fittings & accessories complete. PIMTAS / AQVASTAR make32 mm ( 1.25 " )

Supply of Micro sprinkler of half & full circle with 55 LPH output flow with necessary micro tube & stake. Rain Bird / JISL make including installation charges.

Supply of Micro sprinkler of half & full circle with 55 LPH output flow with necessary micro tube & stake. Rain Bird / JISL make including installation charges.

Sprinklers and accessories

Supply,Fixing & commissioning of Popup Spray with MP Rotator SS Nozzle, Radius - 3 - 9.1 m at 2.8 Bar operating pressure, Double popup mechanism, Multi trajectory, Stainless steel nozzle construction.

Supply, Fixing & commissioning of 5004 PLUS SAM PRS Series Rotor pop up sprinkler full/part circle having radius of 6.7m - 12m @ 2.5 - 4.5 bar with discharge of 0.09 - 0.61 ltr./sec. the sprinklers having Arc Adjust thru Top Cover w/ Std. Screwdriver The sprinkler is gear driven rotary type with having 3/4" bottom inlet. Oversized wiper seal, Rain Curtain technology, gentle close-in watering and Self-flushing arc adjustment port and also having tapered riser stem with Wiper Seal The sprinkler shall have Plus (PL) Flow shut off, 45 psi pressure regulator with flow optimizer technology, internal Seal - A - Matic device which prevents low head drainage (upto 3.1m) & hence puddling & erosion. The body of sprinkler is of non - orrodible, heavy duty, ABS plastic. O-ring Slip Clutch, Racheting Slip Clutch, Side Inlet Available 6" and 12",Turret-mounted ID Plugs, Flow Stop Available, Non-potable water indication available etc., complete including installation charges.

Supply of 1/2" Pop up connecting swing joint assembly. The tubing shall be made of polyetylene having wall thickness of 2.3mm ,a working pressure of 5.5 kg/cm2 at 430C and a surge pressure of 16.6 kg/cm2. The fittings shall be made of UV resistant thermo plastic.SA Series including installation charges

Supply of 3/4" Pop up connecting swing joint assembly. The tubing shall be made of polyetylene having wall thickness of 2.3mm, a working pressure of 5.5 kg/cm2 at 43oC and a surge pressure of 16.6 kg/cm2. The ittings shall be made of UV resistant installation thermo plastic.SA Series including installation charges

Supply of Imported HDPE service saddle of varying size including installation charges.

Valves and Accessories

Providing, fixing, Testing & Commissioning of PVC Ball valve with quarter turn including all necessary fittings & accessories complete. PIMTAS / AQVASTAR make 80 mm ( 3 " )

Providing, fixing, Testing & Commissioning of PVC Ball valve with quarter turn including all necessary fittings & accessories complete. PIMTAS / AQVASTAR make 50 mm ( 2 " )

Supply of Navc10 (or Equivalent Brand) - 2” dia Combination AV PN 10 BSP including installation charges.

Supply,Fixing & commissioning of 12" Rectangular Valve Box with Green lid for the solenoid valve assembly.

Supply of 10" Round valve box with greenlid and corrugated structure with unique shovel access slot and bolt hole knockout.

Supply of Quick coupling valve made up of Aluminium with locking cover corrosion resistant and stainless steel spring.

Supply of Key threads into top of QCV to provide water access.

Supply,Fixing & commissioning of 1" Brass QCV swivel Elbow.

FILTRATION UNIT

Supply of 3.0" Twin Disc Filter 50 M³ / Hr. including installation charges. (brands like Rain Bird or equivalent)

PUMPING UNIT

Supply,Fixing & commissioning of Open well submersible pump, control panel with volt meter , ameter, Single phase preventor, dry run protection & over load relay with 3" NRV , 2" PRV with fittings and accessories.

Flow of Pump : 6-7 lps

Pressure Head Range = 45-48 mtr

No. of Pump : 1 Working

Supply of Gunmetal non return valve 3.0 " dia. (ISI)

Supply,Fixing & commissioning of 2" Pressure release valve with fittings

80 mm dia UPVC pipe

Automation Equipments

Supply,Fixing & commissioning of 2" Solenoid Valve with Flow control, 24VAC having features like, Double - Beaded diaphragm seal; pressure range - 1.5 - 10 Bar; Temperature rating - 66 deg C.

Supply,Fixing & commissioning of Single Staion IP68 rated submersible Decoder with required surge protection.

Supply,Fixing & commissioning of Automation Decoder Controller , upto 54 station plus 1 master/ pump valve with two wire system. Features like 4 Independent irrigation program, Any 2 programs can operate simultaneously, 1 sensor input available, upgradable options for central control software ,map based navigation and remote management.

Supply,Fixing & commissioning of 2C x 14 AWG Automation Decoder Cable

Supply,Fixing & commissioning of Adjustable Pressure regulator having features like Regulation from 1.4 - 7 bar, working with AC and DC - Latching solenoids

Supply,Fixing & commissioning of DBY - Cable joints

Supply,Fixing & commissioning of ET sensor having features like automatically adjusts controller run times daily based on local climate conditions using on-site solar radiation and air temperature to reduce water usage and improve the plant health

Supply,Fixing & commissioning of Cable Junction box - Round valve box

Supply,Fixing & commissioning of Earthing components

Supply,Fixing & commissioning of pump start relay with fitting and accessories.

Electrical works

CT Metering Panel (as per the TANGEDCO norms) - Supply, Installation, Testing and Commissioning of CPRI approved make of panel, cubicle type, Free standing, floor mounted, single front, 14 SWG CRCA sheet steel, enclosed separate compartment for each feeder, front operated, Powder coated, indoor type dust and vermin proof, hinged lockable doors, complete with electrolytic grade copper bus bars, internal wiring, colour coding, ferrules, Panel mounting MS Channels, fasteners, etc., RYB indication lamps, internal wirings, Digital voltmeter and Ammeter and other required accessories for the complete operation as per the Tangedco requirements. Necessary approval to be obtained from Tangedco before procurement including all associated control wiring. 1set of 250/5A CT with TNEB metering provision and 1 nos of 250A /5A CT for APFC.. For all items in this section, the rate includes necessary supports as required at site. No extra payment will be made for the same. Rate shall inclusive of factory witness test and all accessories, breakers , control wiring, models has to be followed as per in the technical specification.

Fabrication, Supply, Erection, Testing and Commissioning of weather proof CRCA sheet steel powder coated MCCB Indoor Panel Board, made up of 2mm powder coated, including bus bar provision of double door with industrial lock with Multifunction Meter 1no and 1no 250A Four Pole Change Over Switch, Main 1no EB source Incoming 250A 4Pole MCCB and Main 1no DG source Incoming of 125A 4Pole MCCB's, 1no of 200A 4Pole MCCB's, 1no of 160A 4Pole MCCB's, 2nos of 100A 4Pole MCCB's, and 8nos of 63A 4Pole MCCB's for and 2nos of Spare compartment for O/G with suitable copper bus bar (33x6mm) having three phase Multifunction meter with line indicators for erecting the indoor panel board complete etc., The above panel board is to be erected on Anchor fastners, bolts and nuts for mounting the Indoor Panel etc. complete.

Fabrication, Supply, Erection, Testing and Commissioning of weather proof CRCA sheet steel powder coated MCCB Indoor Panel Board, made up of 2mm powder coated, including bus bar provision of double door with industrial lock with Multifunction Meter 1no and Main 1no EB source Incoming 160A 4Pole MCCB and 6nos of 63A 4Pole MCCB's 2nos of Spare compartment, for O/G with suitable copper bus bar (33x6mm) having three phase Multifunction meter with line indicators for erecting the indoor panel board complete etc., The above panel board is to be erected on Anchor fastners, bolts and nuts for mounting the Indoor Panel etc. complete.

Fabrication, Supply, Erection, Testing and Commissioning of whether proof CRCA sheet steel powder coated MCCB Metering Panel Board, made up of 2mm powder coated, including 25x6mm aluminium bus bar provision of double door with industrial lock with of 15nos of 32A DP MCB, 15nos neutral link and 15nos of Earth link with TNEB Single Phase Serives connection Charges included 15 nos of Single phase Kwh meter serives connection three phase Multifunction meter with line indicators for erecting the Metering panel board complete etc., The rate is inclusive of Transport Charges etc. The above panel board is to be erected on Anchor fastners, bolts and nuts for mounting the Metering Panel etc. complete.

Supply, Erection, Testing and Commissioning of the following Type Outdoor lighting distribution panel with individual segegration chamber with MCCBs / MCBs /ELCBs, / RCCBs , Phase segegration Timer and contactor manufacturer's sheet 16SWG enclosure for with provision for cable entry boxes, with Outdoor application IP65 as specified Protection, fixed on the floor with all interconnections and accessories, pedestal frame with concrete grouting or suitable to fix at concrete plinth as per the Corporation/ Highway department requirement. Incomer 40 A TPN MCB with Timer control On/OFF Outgoing : 20 A DP RCCB -30mA - 12 Nos.

Supply and fixing of 7 segment 8 way TPN MCB sheet steel distribution board (Higher end) with metal /acrylic door cover flush type /surface type fitted with busbars and neutral links with single / three phase MCB outgoings and seperate 4 way provision for accomodating one no. 4 pole incoming MCB / Isolator and another seperate 4 way provision for accomodating one no. 4 pole ELCB / RCD (totally 8 ways in one segment) (3 x 8 ways in each segment) and seperate provision for MCB / Isolators ( totally 24 nos.) for sub incomers in 3 segments with lable holder and provison for taking up cable for size not less than 35 sq.mm. with the following in flush with wall with earth connection only. (Without ELCB)

Supply and fixing of 8 way Vertical Triple pole and neutral MCCB sheet steel enclosure distribution board ( with MCCB incomer) with double door (metal) with 1 no.63A 4P MCCB switch as incoming and 8 nos.32A 3P MCB , as outgoing with suitable cable end box in flush with wall with earth connection only. Higher End

Supply and fixing of 8way Single pole and neutral MCB sheet steel enclosure with IP 42 protection distribution board double door with 1no. 32A DP MCB as incoming and 6Nos of 10A SP MCB for Outgoing in flush with wall and making good of the concealed portion with earth connection only. The MCB DB and MCB's should be with ISI mark. ( Like MDS / Legrand make )

Cables

Supply and laying of 31/2C x 120 sq.mm Al XLPE armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 mt. Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good.

Supply and Clamping of 31/2C x 120 sqmm Al XLPE LTUG Armoured LTUG cable on post or on wall and MS Clamp with necessary accessories etc.

Supply and laying of 31/2C x 70 sq.mm Al XLPE armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 mt. Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good.

Supply and Clamping of 31/2C x 70 sqmm Al XLPE LTUG Armoured LTUG cable on post or on wall and MS Clamp with necessary accessories etc.

Supply and laying of 3.5 x 50 sq.mm Al XLPE armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 mt. Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good.

Supply and Clamping of 31/2C x 50 sqmm Al XLPE LTUG Armoured LTUG cable on post or on wall and MS Clamp with necessary accessories etc.

Supply and laying of 31/2C x 25 sq.mm Al XLPE armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 mt. Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good.

Supply and laying of 4C x 16 sq.mm Al XLPE armoured LTUG cable in size of 38/50mm dia HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

Supply and laying of 4C x 10 sq.mm Al XLPE armoured LTUG cable in size of 38/50mm dia HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

Supply and laying of 2C x 10 sq.mm Al XLPE armoured LTUG cable in size of 38/50mm dia HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

Gland

Supply and fixing of brass cable gland for 2C x 10 sq.mm PVC LTUG armoured cable with earth connection with necessary accessories etc.

Supply and fixing of brass cable gland for 4C x 10 sq.mm PVC LTUG armoured cable with earth connection with necessary accessories etc.

Supply and fixing of brass cable gland for 31/2C x 25 sq.mm PVC LTUG armoured cable with earth connection with necessary accessories etc.

Supply and fixing of brass cable gland for 31/2C x 50 sq.mm PVC LTUG armoured cable with earth connection with necessary accessories etc.

Supply and fixing of brass cable gland for 31/2C x 70 sq.mm PVC LTUG armoured cable with earth connection with necessary accessories etc.

Supply and fixing of brass cable gland for 31/2C x 120 sq.mm PVC LTUG armoured cable with earth connection with necessary accessories etc.

Termination

Supply and providing cable end termination of 31/2C x 25sqmm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc. with electrical connection complete and etc to complete the work.

Supply and providing cable end termination of 31/2C x 50 sqmm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc. with electrical connection complete and etc to complete the work.

Supply and providing cable end termination of 31/2C x 70sqmm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc. with electrical connection complete and etc to complete the work.

Supply and providing cable end termination of 31/2C x 120 sqmm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc. with electrical connection complete and etc to complete the work.

Internal Electrification

Wiring, testing and commissioning of 2Rx1.5sqmm (22/0.3) PVC insulated unsheathed SC Cu. Conductor of 1100V grade in suitable PVC rigid pipe with 2 mm thick, ISI marked concealed in wall and ceiling with PVC accessories with Module GI Switch Box in flush with wall with 6A one way module switch with module front plate continuous earth wire connection by 2.5sq.mm PVC insulated SC unsheathed copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light / Fan Point (for electronic) (Primary Point )

Wiring, testing and commissioning of 2Rx1.5sqmm (22/0.3) PVC insulated unsheathed SC Cu. Conductor of 1100V grade in suitable PVC rigid pipe with 2 mm thick, ISI marked concealed in wall and ceiling with PVC accessories with Module GI Switch Box in flush with wall with 6A one way module switch with module front plate continuous earth wire connection by 2.5sq.mm PVC insulated SC unsheathed copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light / Fan Point (for electronic) (Secondary Point )

Run of Mains

Supply and run of 2 of 2.5 sqmm (36/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection 1 of 2.5 sqmm (36 /0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade and making good of the concealed portion with suitable colour.

Supply and run of 2 of 4 sqmm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in suitable PVC rigid pipe concealed wall and ceiling with continuous earth wire connection 1 of 2.5 sqmm (36 /0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade and making good of the concealed portion with suitable colour.

Supply and run of 50mm Dia HDPE pipe of 4kgf/cm2 approved quality and best variety conforming to ISS and ISI mark below ground in HDPE pipes.

Earthing as per the ISI specification with an earth electrode of 2.1mt class 'B' GI pipe of dia not less than 40mm, with copper earth plate of size 125mm x 50mm x 6mm, with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry.

Supply and run of 25mm x 6.25mm Aluminium flat with necessary clamps / supports on wall / floor / ground for earth connection and etc to complete the work.

Supply and run of 2 of No.8 SWG GI wire for guarding with cradle with No.8SWG GI wire at the equal interval of 1.5 meter and etc to complete the work.

Coil Earth to Street light poles with No 8 SWG GI wire of 11.5 Mtrs of length in which 10 mtrs of total length compressed in to a coil of one meter length (75 mm to 100 mm dia) connected suitable with Hexagonel earth bolt of size 8mm to 25 mm welded on the pole at one end with a coil position fixed on the earth and etc to complete the work.

Pole and fittings

Supply and fixing of Bucida 9 metre 6 Arms "T" Shape pole with 6 nos of 4 x 60W LED Flood Light fittings. The above bottom size 250mm dia X 12thk MS base plate with 4 Nos of Foundation Bolt, M20 500mm bolts and nuts cc 140 duly welded at the bottom and with concreting Foundation with PVC unsheathed copper leads from terminals to the fitting with supply and fixing with necessary accessories with complete set.

Supply and fixing of Brussel 7 metre "T" Shape length pole with 8 nos 50W LED Light 250mm dia X 12thk MS base plate with 4 Nos of Elongated holes 38 x 19 to suit M16 bolts at cc 140 duly welded at the bottom and with concreting Foundation with supply and fixing with necessary accessories with complete set.

Supply and fixing of Cylin Midi 40W Light fitting with PVC unsheathed copper leads from terminals to the fitting and to complete necessary accessories and etc to complete the work.

Supply and fixing of Cylin Midi 25W Light fitting with PVC unsheathed copper leads from terminals to the fitting and to complete necessary accessories and etc to complete the work.

Supply and fixing of Nebula Midi 12W Light fitting with PVC unsheathed copper leads from terminals to the fitting and to complete necessary accessories and etc to complete the work.

Supply and fixing of Nebula Midi 12W Light fitting with PVC unsheathed copper leads from terminals to the fitting and to complete necessary accessories and etc to complete the work.

Supply and fixing of Sudo Asy Frame 12W LED Light fitting with PVC unsheathed copper leads from terminals to the fitting and to complete necessary accessories and etc to complete the work.

Supply and fixing of 3mtr Column Light Pole with 48W LED Light fitting and the bottom with concreting and construction on masonary pedestal and PVC unsheathed copper leads from terminals to the fitting and to complete necessary accessories and etc to complete the work.

Supply and fixing of 24W LED Linear In Ground Luminaire wall Grazer wall Light fitting with 30W LED Driver with PVC unsheathed copper leads from terminals to the fitting and to complete necessary accessories and etc to complete the work.

Supply and Laying of Neon flex 9W LED Strip Light (Per meter) with PVC unsheathed copper leads from terminals to the fitting and to complete necessary accessories and etc to complete the work.

Supply and fixing of 3mtr 40W LED Stencil Light Pole with fittings and the bottom with concreting and construction on masonary pedestal, supply and fixing with necessary accessories with complete set.

Supply and fixing of 1200mm (48") sweep AC ceiling fan complete with stepped electronic 300W regulator with 1 metre down rod with fan clamp with side plates and cross arm of size 450mm (18")

Supply and fixing of 300mm (12") sweep (light duty) AC exhaust fan complete with necessary wall opening and making good of the wall

Supply and fixing of 1 no.6A two module 5pin socket, 1 no. 6A one module switch on suitable module surface mounting Box (GI ) with module cover plate (plastic) on wall with connections. Higher End

Supply and fixing of 1no of 16A two Modular 5Pin socket, 1no 16A Modular switch with module cover plate (plastic) on suitable concealed in box (GI) in flush with wall with connection. Higher End

The cable rack shall have runners rugs of suitable size, horizontal elbow, vertical elbow 90 Deg. Up vertical elbow 90 Deg. Down, re-deep, coupler plates, materials. The cable racks shall be suspended from ceiling supported from side walls in columns etc. with adequate size supporting angles / channels with fastners, welding, anchor bolts, nuts etc. The rack shall have suitable cable clamping arrangements etc.' Cable Tray /ladder should be powder quoted as match with ceiling colour as per PWD requirements. The rate shall inclusive of necessary Wedge anchors theaded rods,nuts & bolts, making clamp for rcc roof fix / perlin/Truss, cable tray clamps etc,(8 mm threaded rod supports shall be provided at not more than 2 mtr center to center and as per site requirement )

Supplying and fabricating of MS structural steel supports of size 450mm x 150mm for various applications using U channels, MS angle iron, bolts, nuts, anchor bolts etc., required for the work, cut to the size, bent to shape, welding, grouting etc., complete. Supports shall be powder coated with required colour for different system as mentioned above.

Supply, Installation, Testing and commissioning of 32 channel 8 SATA NVR, with 6TB Hard Disk Drive 4 nos, New logical and visualized GUI design Dual-OS design to ensure high reliability of system running, ANR technology to enhance the storage reliability when the network is disconnected, Configurable normal or hot spare working mode to constitute an N+1 hot spare system Video Input and Transmission, Connectable to the third-party network cameras Compression and Recording, H.265+ compression effectively reduces the storage space by upto 75%, Full channel recording at up to 12MP resolution HD Video Output  HDMI1 / VGA1 outputs provided  HDMI1 Video output at up to 4K ( 3840 × 2160 ) resolution Storage and Playback, Upto 16 SATA interfaces and 1 eSATA interface for HDD connection, Support upto 10TB capacity for each HDD, Smart search for efficient playback. and smart playback to improve the playback efficiency,Supports VCA search for fire/ship/temperature/temperature difference detection triggered video files, POS information overlay on live view and playback, POS triggered recording and alarm Network & Ethernet Access  Hik-Connect for easy network management, 2 Gigabit Ethernet network interfaces. (Make : Hikvision / Dahua / Sony).

Supply of 8MP, Internet Protocol fixed BULLET CAMERA with following specification: ●1/2.5" Progressive Scan CMOS, ● 3840 × 2160 @15 fps,2.8/4 mm fixed lens,01 lux @ (F1.2, AGC ON), 0.028 lux @(F2.0, AGC ON), 0 lux with IR, H.265+, H.265, H.264+, H.264, 2 Behavior analyses ( Line crossing detection, intrusion detection) ● Face Detection ● 120dB WDR, ● BLC/3D DNR/ROI, IP67 complied ●On-board Storage - Built-in micro SD/SDHC/SDXC card slot, up to 128 GB, ● Shutter Speed 1/3 s to 1/100,000 s, ● 3-Axis Adjustment Pan: 0° to 360°, tilt: 0° to 100°, ● rotate: 0° to 360°, 2.8 mm, ● horizontal FOV: 102°, vertical FOV: 53°, diagonal FOV: 124°, ●Lens Mount M12 ● IR Range I5: up to 50 m, ● Image Settings Rotate mode, saturation, brightness, contrast, sharpness adjustable by client software or web browser, ● Power Consumption and Current-12 VDC, 0.7 A, max. 7.5W PoE: (802.3af, 36V to 57V), 0.3 A to 0.2 A, max. 9W ● Camera out fitted with metal housing so as to prevent the lens from damages during physical abuse. (Make: Dahua/Panasonic)

Supply, Installation, Testing and Commissioning of 55" smart LED TV with following specifications a) Full HD 1920 x1080 (4K monitor) b) IPS pannel c) Slim back light LED module d) 900 PMI e) Triple XD engine f) Dynamic scanning g) ANR h) True colour generator i) 8modes of picture j) picture wizardIII k) Real cinema 24P l) HDMI -3nos m) USB -3nos n) Built in LAN o) Magic remote p) Dimension 1242 x 724 x 55.1min(37). (Make: Sony/ LG /Samsung).

Supply and fixing of outdoor 4 x 6 PVC box with 102mm x 77mm x 102mm with all fixing accessories.

Supply and Laying of CAT 6 armoured cable in 50mm HDPE pipe below the ground complete with all necessary accessories etc.. (Between ethernet switch to camera and radio modem) i. Application : Primary (Campus), Secondary (Riser), Tertiary(Horizontal) IEEE 802.3 : 10Base-T; 100Base-T; 1000Base-T IEEE 802.5 16 MB; ISDN; TPDDI; ATM ii. Standards: ISO/IEC 11801 2nd ed.; IEC 61156-5 2nd EN 50173-1; EN 50288-6-1,EIA/TIA 568C.2, RoHS Compliant. Fire Rating: PVC : IEC 60332-1. iii. Conductor - Bare Copper Wire iv. Insulation - Polyethylene v. Twisting - 2 Cores to the pair vi. Cable lay up - 4 Core to the pair It has diameter of (23 AWG) 0.550 ± 0.015.Insulation : Polyethylene.GI wire of size is 0.90 ± 0.030mm.

Fixing and Termination of CAT 6 Cable RJ 45Jack Single Point ( Point to Point ) Crimping, Testing and arrangement charges.

Supply and fixing of POE 24 port switch 10/ 100 / 1000 Base -T / 2 x 1000Base-FX / 20Gbps bandwidth / IEEE803.af/at compliant PoE+ / RJ45 supports auto MDI/MDI-X function / Auto negotiation speed, half/full-duplex / Store and forward / Max packet size: 10kbytes / Wide range power design (12~56VDC) / Operating temperature (-40 ̊C ~ +75 ̊C) / Reverse polarity protection / Resettable fuse to protect against overcurrent / IP-40 protection / EFT protection for power line.

Supply and Fixing of 9U Rack with Accessories -Higher end 9U Rack with LNS unit and fan extra for the above rack.

Supply and Instalatin for 2KVA UPS with Battery, Single Phase UPS (Single Phase In & Single Phase Out) Capacity - System with Battery - 2 Hours back up

Supply,Erection of 6m Length pole with base plate of size 300x300x12mm as per IS-875 with following specification. Pole Outter dia -76.10mm x 3.65mm Thick x 6 meter with foundation Charges.

PA System

Supply, Installation,Testing & commisioning of 480 watts P.A Mixer Amplifier with the output power of 1350 watts maximum, 500watt rms at 10% Thyristor harmonic distortion(THD), 850watt RMS at 5% THD, 800 watts RMS at 2% THD and the power supply AC voltage ranging from 220-240 volt, 50/60 hertz. with the DC input of 48 volt and 1000watts has tone controls of Bass=+- 10 db at 100 hz weighing 42kg with the speaker output of 2Q,4Q.70volt&100volt has power consumption of 1600VA AC &12A DC and 100db output regulation at 1khz no load to full load ratio. The signal to noise ratio is 60db with the imnput channels of 0.8mv/4.7kq,3*Aux 100mv/50kq.The frequency response of 50-15000hz+-3db.(Make:Ahuja SSA 10000 /Bosch or its equivalent).

Supply,Installation, Testing & Commisioning of 10" gooseneck with suitable base incorporates separate bush switches for momentary and dynamic microphone with 600ohm impedence and has 2.5mv/pa sensitivity and frequency response ranging from 50-15000hz with multi tone chime model.(Make:-ACM66 Ahuja/bosch/its equivalent)

Supply, run, testing and commissioning of 2Core x 1.5sq sqmm PVC insulated Armoured Speaker Cable in suitable 19mm dia Pvc Rigid pipe concealed on wall and ceiling with continuous earth wire connection with painting of suitable colour.

Supply & Installation of custom built M.S Powder coated wall mounting Audio rack with Lock & key for housing of Amplifier & player/Recorder conforms to EIA-310,IEC-60297 and able to withstand the load of 40kg with welded construction made up of CRCA steel with suitable height, width and depth.