Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹38.4 LAccepted-AOC | L1 | Accepted-AOC Being Lowest | |
| 2 | L2₹40.7 L+₹2.2 L (5.69%)Rejected-Finance WZ 199 LAJWANTI GARDEN GALI NO 4 NEW DELHI 110046 | NEW DELHI | DELHI | 110046 | L2 | Rejected-Finance Not Being Lowest | |
| 3 | L3₹41.4 L+₹3.0 L (7.70%)Rejected-Finance HOUSE NO 86 SUJEET VERMA RAJEEV NAGAR PH 3 DELHI NORTH WEST DELHI DELHI 110086 UDYAM DL 06 0117122 | NORTH WEST DELHI | DELHI | 110086 | L3 | Rejected-Finance Not Being Lowest |
Tender Value
₹31 L
EMD Value
₹62,000
Closing Date
21 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (Central) Delhi Cantt-10
GE (Central) Delhi Cantt-10
PROVN OF CERTAIN SANCTION WORK IN THE AREA OF AGE B/R-I, B/R-II AND AGE E/M UNDER GE (CENTRAL) DELHI CANTT-10
2022_MES_565103_1
GE/C-67/2022-23
Open Tender
Civil Works
Item Rate
180 days
GE (Central) Delhi Cantt-10
As per NIT
9 documents required · 9 mandatory
₹500
Yes
GE (Central) Delhi Cantt-10
₹62,000
Yes
9 Jan 2023
24 Nov 2022
23 Dec 2022
24 Nov 2022
21 Dec 2022
3 Dec 2022
24 Nov 2022 - 3 Dec 2022
Amount
M&L for Brick work with sub class 'B' bricks using old size bricks straight or curved on plan exc 6m mean radious built in CM (1:4) etc complete all as specified and directed.
M&L for ready mix plaster of 15mm thick on brick or conc surfaces incl necessary cement slurry with bulk density 1.40 to 1.70 kg, water ratio 17 to 19% by weight & compressive strength as per IS 4031 part 6 smooth without using extra cement and applying three coats of white lime wash on newly plastered ceiling surfaces including taking down old plaster on ceiling complete all as specified.
M&L for ready mix plaster of 10mm thick on brick or conc surfaces incl necessary cement slurry with bulk density 1.40 to 1.70 kg, water ratio 17 to 19% by weight & compressive strength as per IS 4031 part 6 smooth without using extra cement and applying three coats of white lime wash on newly plastered ceiling surfaces including taking down old plaster on ceiling complete all as specified.
M&L for ready mix plaster of 5mm thick on brick or conc surfaces incl necessary cement slurry with bulk density 1.40 to 1.70 kg, water ratio 17 to 19% by weight & compressive strength as per IS 4031 part 6 smooth without using extra cement and applying three coats of white lime wash on newly plastered ceiling surfaces including taking down old plaster on ceiling complete all as specified.
Supply only integral water proofing compound.
M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of priming plastered and other surfaces with alkali resistant priming paint complete all as specifed as direted by Engr-in-charge.
M & L for preparation of newly plastered surfaces applying two coats of oil bond destember over one coat of birla white wall care putty 1mm thick on newly plastered surfaces(internal) of walls complete all as specified and directed.
M&L for old decorated surfaces plastered or unplastered surface of wall complete removal of existing treatment brooming down , rubbing , scraping and washing with water etc and applying two coat of oil bond distemper over one coat of wall care putty on wall complete all a spcefied.
M&L for preparation of old decorated plastered surfaces of walls, brooming down,washing with water etc and applying two coat of cement based paint over one coat of putty up to 10 m height complete all as specified and directed.
M&L preparation of Old or previously untreated steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified
M & L for preparation of Old or previously untreated wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed
S&F solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement/adhesive and fixing at site on PVC/wooden frame as per specifications and drawing given in SSR. Note :- Fillets shall be measured and paid for separately.
S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specifications and drawing given in SSR and as directed.
S&F for fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness .The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame and fixing with ancher bolts all as specified and as directed.
S&F MS butt hinges medium weight 100 mm size fixed with MS screws.
S&F aluminium anodised barrel tower bolt extruded section 150 mm long and fixed with MS screws.
S&F 150 mm extruded aluminium alloy handle anodised fabricated type and fixed with mS screws.
S&F 300 mm extruded section aluminium alloy anodised, sliding door bolt with hasp and staple and fixing clip of sheet and fixing bolt and nut.
S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm complete all as specified and directed.
Supply & Laying 3 Layered PP-R (Polypropylene Random Copolymer) Pipes 16mm Outer Dia (Bore) ISI Marked PN-16, SDR 7.4 UV Stabilised and Anti-Microbial Fusion Welded having Thermal Stability for Hot and Cold water Supply including all PP-R Plain and Brass Threaded Polypropylene Random Fittings (such as Bends ,Elbows, Tees, Short Pieces ,Connectors, Back - Nuts Capps,Plugs, Unions etc) Laying in Trenches/Floors/Ducts or Fixing to walls, etc, and also Cutting of pipes as required , comlete as all specified and as directed.
All as per Item No 21 here-in-before, but PP-R (Polypropylene Random Copolymer) Pipes 20 mm outer Dia (Bore), ISI Marked PN-16.
Cutting chases, pinning in, for brick walls built in cement mortar, making good to facings where required and pointing in cement mortar 1:3 or PCC 1:2:4 type B-O(using 12.5 mm graded aggregate) as required for conceled water tubing etc cutting exceeding 10cm girth but not exc. 20 cm complete all as specified and directed.
Supply and fix in repair vitreous china wash hand basin (with stands) white of size 550X400mm excluding pillar taps, waste chain and plug and porcelain stopper including a pair of mild steel angle iron brackets of suitable size and waste pipe & waste cupling complete all as specified.
S&F in repair vitreous china wash down water closet pan (padestal pattern) white incl 'P' or 'S' 100 mm trap and making good the disturbed surface to match with the existing complete all as specified and all as directed.
S&F in repairs plastic water closet seat cover white closed pattern with flat bottom end cover and mild steel chromium plated hanging device Make-Cera/Hindustan complete all as specified.
Supply and fix in repair PVC low level white flushing cistern valveless syphonic action type 10 lts capacity IS marked with inlet, ball valve, float and handle including PVC flush pipe 32 mm dia with bend and a pair of mild steel angle iron brackets of suitable size including making necessary connections to water supply pipe line and WC,(ISI Marked) complete all as specified.
S & F in repairs in repairs viterous china Urinal full stall type, white including providing & fixing plugs, beddinjg urinal against wall in cement mortar (1:2) securing to plugs with & incl 60mm long brass screws, pointing around urinal back in cemnet, with & including PTMT grating and union for discharge pipe including waste pipe of polythelene of low or high density or PVC 32mm dia, complete all as specified & directed.
S & F in repairs 15 mm dia 600mm long PVC connections with brass check nut complete.
S & F in repairs Glass Corner Shelf 6mm thick including CP railing radius 250mm complerte all as specified and directed by Engineer-in-Charge.
S&F in repairs Glass shelf assembly 5.5mm thick, 600mm long 120mm wide with cp railing complerte all as specified and directed by Engineer-in-Charge.
S&F in repairs Health faucet, CP brass with 1.50m long flexible pipe complerte all as specified and directed by Engineer-in-Charge.
S&F in repairs bib taps 15 mm bore chromium plated brass, fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified.
S&F in repairs pillar taps 15 mm bore chromium plated brass, fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified.
S&F in repairs angle valve, fancy type, chromium plated brass, 15mm, complete all as directed.
S&F in repairs 2-in-1 angle valve, fancy type, chromium plated brass, 15mm, complete all as directed.
S&F for 15 mm bore gate valve,cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as directed.
S&F for 20 mm bore gate valve,cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as directed.
S & F in repair concealed brass chromium plated stop valve fancy type suitable for 15mm bore of pipe with long shank and cup complete all as specified.
S&F in repairs chromium plated brass central hole WHB mixer 15 mm bore chromium plated, fancy type including joints to hot and cold complete all as specified.
Demolition of stone slab and tiles of any description or thickness in floor apron etc incl remove all tiles and other debris in 2 KM form site complete all as specified and directed.
M&L for Non - skid Ceramic colour tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or oloured cement to match incl 15mm thick screed bed or bedding layers in cement mortar ( 1:6) complete all as specified and as directed.
M&L for glazed ceremic colour tiles (600x300x7mm) thick, in vertical surface etc set and jointed in neat slurry and pointed in white or coloured cement to match with tiles and including 10mm thick rendering in cement mortar (1:6) complete all as specified and as directed.
S&F Non - skid Ceramic colour tiles 600 x600 x 7 to 8 mm thick in floors etc and 15mm thick screed bed 1:6 in cement mortar. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified.
S&F Non - skid Ceramic colour tiles 600 x150 x 7 to 8 mm thick in vertical surfaces etc and 10mm thick screed bed 1:4 in cement mortar. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified.
S&F in repair cast iron floor trap square type with Cockroch Proofing CP grating with or without hole including provision of jointing to waste pipes in run lead joint dia of outlet 75 mm, complete all as specified.
S & F in repairs for PVC waste coupling 32mm dia PTMT(half or full threaded) suitable for WHB/Sink (min wt 450 gms), completed all as specified & directed.
S F Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern.
S&F stainless steel toilet paper holder with Flap recessed type complete all as specified and as directed.
M and L Providing & Fixing False ceiling with semi perforated 12mm thcik micro tegular edged at all heights with GRG (Glass Fibre reinforced Gypsum) false ceiling tiles of size 595x595mm of approved texture, design and pattern having moisture content less than 2%,humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 475 (part-4)-1970 and light Code Description unit rate No 429 SUB HEAD :26.0 NEW TECHNOLOGIES AND MATERIAL reflectance of 85% minimum to be laid in true horizoatal level suspended on interlocking metel T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanised @ 120 grams oer sqm including both sides) comprising of main-T runners of size 15x32mm of length 3000mm, vross-T of size 15x32nn of lenght 1200mm amd secondry itermediate cross-T of size 15x32 of lenght 600mm to form grid module of size 600x600mm, suspended from ceiling using galvanised mild steel items (galvanising @ 80 grams per sqm) ie. 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L-shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000mm to be fixed on perimeter wall/partition with the help of plastic rawl pluhs at 450mm center to center and 40mm long dry wall screws. The work shall be carried out as per specification, drawing and as per direction of the Engineer-incharge. Make: Diamond or equivalent as approved by GE.
M&L for Surface dressing n exc 15 cm deep and site clearance complete all as specified and directed.
M & L for 100 mm thick cement concrete type D-2, 1:4:8 (40 mm graded stone aggregate) as in sub base all as specified.
M&L for Rubber Moulded Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry laid over 15mm thick screed bed in cm 1:6 as in floors with no pigment complete all as specified and directed.
M& L for non skid coloured rectified ceramic tiles 300x300x7 to 8mm thick in floors, etc, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed for laying floor in CM 1:6 complete all as specified and directed by Engineer in Charge, approved by GE.
M&L for 75 mm thick cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate). Plinth protection laid to a slope of 1 in 24 laid in alternate bays filled with bitumastic filling. Each bay shall not exceed 3m in length, 12mm wide & 75mm deep joint shall be formed between the bays which shall be filled with Mastic filling to full depth comprising a mixture of 1 part of heator hot blow bitumen 85/25 portion and two parts of heated badrapur sand (by volume) complete all as specified and directed.
Dismantling of 75 mm dia cast iron pipe (soil/waste/vent) with fittings etc fixed to walls,ceiling, on floors & from trenches if required including taking out any type of joints complete all as specified.
S & F 75 mm dia (bore of pipe) cast iron (sand cast) soil, waste, vent pipe in any length with or without ears with cement joint fixed to walls, complete all as specified.
S&F in repair 75mm dia (bore of pipe) cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) with cement joints, complete all as specified.
S&F wall hung WC of size 405 x 360 x 540 mm with soft close seat cover complete all as specified and as directed.
S&F CP brass 32mm bore bottle trap (with internal partition) with 300mm & 190mm long wall connection pipes & Wall flanges complete all as specified and as directed.
S&F slim concealed cistern with floor mounting frame, installation kit and 'S' type drain pipe connection set for wall hung WC (without flushing plate) complete all as specified & directed.
S&F control plate segment chrome plated flushing plate for concealed flushing cistern complete all as specified & directed.
S&F 15mm bore CP brass Angular stop cock with wall flange complete all as specified & directed.
S&F in repair fancy type brass chromium plated soap dish holder complete all as specified.
S&F in repair fancy type 15mm dia brass chromium single lever sink mixer with 450 mm long braided hoses for mixing hot and cold water screwed down for iron pipe and fixed to kitchen sink complete all as specified.
S&F 6mm thick, copper back finish, looking mirror of required size, made of float sheet glass of best quality & approved make, over 12 mm thick marine board fixed to rawl plug with round head screws and washers including teak wood beading with melamine polish all around, complete in all respects inclusive of cost of all materials, labour, tools, tackles etc complete all as specified and as directed.
S & F in repair fancy type 250mm size square brass CP shower rose all as specified.
S&Fin repair fancy type stainless steel towel rack 600mm long with lower hangers.
S&F 15mm bore CP brass Bib Cock auto closing system with built in control cock with wall flange complete all as specified and as directed.
S&F 15mm bore sensotronic sensor faucet for Wash basin with 175mm extension body complete all as specified & directed.
S&F for 12 mm thick frameless plain/frosted toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double action hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required fittings, including taking down of existing work all complete as per direction of Engineer-incharge (handle, lock and stopper etc.included).
S&F for 12 mm thick frameless plain/frosted toughened glass partition of approved brand and manufacture, including providing and fixing floor spring type fixing arrangement and making necessary holes etc. for fixing required fittings, including taking down of existing work all complete as per direction of Engineer-incharge (handle, lock and stopper etc.included)
M&L for 40mm Cement concrete type B-1, 1:2:4 (12.5 mm graded aggregate) using WPC finished even and smooth without using extra cement (WPC shall be measured and paid seperately)
M&L for APP based polymeric membrane mineral slate finish minimum weighting 3 kg/Sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt not less than 150 gms/sqm) over one coat of 85/25 bitumen @1.2 kg/sqm and paste the membrane with torching method and again apply a coat of 85/25 bitumen @ 1.2 kg/sqm at overlapping joints.
M&L removing existing old treatment from walls using mechanical grinder complete all as specified and directed.
M& L for prepration of old surface and applying a uniform thickness (average 2-3 mm thickness) of cement based wall care putty of approved make (Birla/ Jk) using spray machine to the entire surface of walls surfaces finished even and smooth complete all as specified and directed.
M& L for applying two coats of Oil Bound Distemper on wall surfaces using Distemper Spray machine over 1 coat of alkali resistant primer to give an even and smooth surface all as specified and directed.
M&L for 8.5mm thick prelam PVC coloured profile panelling with all thickness of 1.25mm each pannel 250mm wide with interlocking joints, coloured, shade, pattern/ designs approved fixed to walls or ceiling with solvent /screw including similar pattern moulding at all around of openings, junctions complete all as per manufacturer instruction and all as per specified and directed.
Complete removal exising old surfaces of wall / ceiling by scrubbing with hard brushing ,brooming down or steel wire brushing scraping down smook root mould moss and efforescent salts and treating oil and greasy spots as applicable and washing with water and applying cement based wall care putty of approved make 2mm thick (average thickness) unifomly and applying Two coats of weather proofing exterior acrylic emulsion paint of DULUXWeather shield Max or APEX ULTIMA from Asian paint over one coat of primer from the same manufacturer complete all as specified and directed.
Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting loose /soft soil and getting out.
M&L for machine pressed precast concrete interlocking paver block with gray cement and with pigment, any shape and size confirming to IS- 15658 -2006 of 60mm thickness, M-35 Gde,Over and including 15mm thick layer of sand complete all as specified and directed.
Removing excavated soil materials n.exc 50m and depositing where directed at a level.
Excavating in post holes soft/loose soil (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm.
M&L for Cement concrete type D2 1:4:8 (40mm graded aggregate) as in foundations, filling and mass concrete complete all as specified and directed.
M&L for MS Work as in posts Roof (Beam, tee, angle, channel or flat sections) includingdistance pieces, cleats etc.Fe 410-W (GdeE- 250) quality A all as specified and directed.
M&L for Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described, and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified.
S & F Expanded metal n exc 4 kg weight per square meter, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members all as specified and directed.
M&L for light shade Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match includin 15 mm thick screed bed in CM1:6 all as specified and directed.
M&L Vitrified Ceramic tiles light shade 10mm thick (square/rectangular) polished, area of each tiles n.exc 0.36sqm, in walls etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick cm 1:4 plastering complete.
M&L for broken brick bats Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface.
S&F 300mm long, stainless steel of AISI 316 grade, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and fixed, complete all as specified.
M&L point wiring concealed in the wall with PVC insulated FRLS 1100 Volts unsheathed cable 1.5 Sqmm multistranded copper conductor and drawing in & including rigid PVC conduit with replacement of sunken terminal MS boxes thickness and 3 mm thick hylam sheet cover for terminal boxes for including porvision of earth wire PVC insulated FRLS 1100 Volts unsheathed 1.5 sqmm stranded copper conductor single core cable connected to common earth dolly the following :-
One light/fan point controlled by one by one way switch ( switch to be measured and paid separtely)
One 3 pin socket outlet 5 hole 5 Amp independent including PVC unsheathed copper conductor 1.5 Sqmm cable as earth wire connected to common earth and to earth dully socket & switches to be measured and paid separately.
(c) All as per item No 93 (b) above but Same board.
One power point with insulated stranded copper conductor cable 4 Sqmm single core and PVC insulated FRLS 1100 Volts unsheathed copper conductor 4 Sqmm S/C as earth wire connected to dolly complete ( socket and switches to be measured and paid separately)
M&L for submain wiring with two single core PVC insulated FRLS 1100 Volts unseathed stranded copper conductor cable 4 Sqmm in and including new PVC conduit medium grade not less than 20 mm dia, for submain wiring and connection complete FRLS 1100 volts unsheathed stranded copper conuctor cable of 4 Sqmm size stranded conductor as earthwire complete all as specified.
M&L for submain wiring with two single core PVC insulated FRLS 1100 Volts unseathed stranded copperconductor cable 6 Sqmm in and including PVC conduit for submain wiring and connection complete including PVC unsheathed copper conuctor cable of 6 Sqmm size S/C as earthwire. Note for Item No 94,95 (i) PVC conduit shall be Medium grade, ISI marked ,FRLS Grade .
M&L switch piano flush type 5 Amp SP one way .
M&L switch piano flush type 15 Amp SP one way.
M&L socket outlet 5 pin 5 Amp flush type .
M&L socket outlet 2 in 1,3 pin 5/15 Amps.
M&L ceiling rose 3 phase PVC polycorbonate,isolated body.
S & F electronic fan regulator 5 step connecting complete all as specified.
M & L for earthing complete with galvanized steel earth plate 600x600x6mm thick buried vertically in ground to depth not less than 2.25 mtr below ground level, with top edge of the plate not less than 1.50 mtr below normal ground level, connected to earth lead GI 4mm dia by means of bolts, nuts, check nuts and washers of galvanized iron and connection to main switch board of panel, including watering pipe GI 20 mm bore light grade 15mm bore for earthing lead, wire mess, funnel, salt, charcoal dust, excavation and refilling pit with PCC 1:2:4 type B1(using 20mm dia stone aggregate) reinforced with 6mm dia round bar @ 75mm cement concrete both always with MS handle 12mm dai and frame all as shown in electric plate No 3 in page 497 of SSR Part I (2009) including testing ion completion all as directed
Supply and fix MCB DB SPN 8 way Horizontal, IP - 43 Protection double door 240 V AC 50Hz with for MCB SPN as incomer and DP/SP MCBs as out going with tinned copper bus bar ,neutral link earth link complete all as directed by Engineer -in- Charge.
Supply and fix MCB DB SPN 12 way Horizontal, IP - 43 Protection double door 240 V AC 50Hz with for MCB SPN as incomer and DP/SP MCBs as out going with tinned copper bus bar ,neutral link earth link complete all as directed by Engineer -in- Charge.
Supply and fix MCB SPN 40 Amps 240 volts 10 KA 50 HZ C curve complete.
Supply and fix MCB SP 6 to 32 Amps 240 volts 10 KA 50 HZ C curve complete.
Supply and fix LED batten luminaire surface mounted, 4 feet system wattage of 22 Watts with lifetime of 50000 burning hours with 70% of its initial lumen maintained. CRI>80, Power Factor > 0.95, THD< 10%, colour temperature - 6500K, surge protection 2.5KV in CM, IP-20 protected, meets LED IS specifications, Class - 1, Short circuit and over circuit protection, voltage range - 150 to 270 Volts AC, temperature range 0 to 50 DegreeC, system efficacy at luminarie level ≥ 100 Lumens/watt and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete all as specified and directed.
Supply and Fix 40 W High efficient LED Street light fitting with pressure die cast LM6 Aluminum housing and has lenses specially designed for Street Lighting with polycarbonate cover. System level efficacy of the Luminarie is 100lm/W with a life class of 50,000 burning hours at L70.The color temperature is around 6500 K with a color rendering index of 70. The luminaire is IP:66 protected with IK05 impact resistance. It has an electronic driver complaint to IEC safety standards with a power factor>.0.9, voltage variation range 120-270V, THD<20%, High and low protection along with a surge protection of 4 KV including provision of 40mm dia GI light grade pipe1.5 meter length bend to shape and necessary clamps etc for fixing the light fittings on pole fixed complete as specified and directed.
Supply and fixing ceiling fans AC single phase 230/240 V of size 1200 mm sweep including making connection with three core flexible, copper cable pvc insulated of suitable length and marking of fan no with black paint complete all as directed by Engr-in-Charge.
Supply and fix in repairs LED 2 X 2 ft backlite surface mounted fitting 36/40 Watts including connecting up with necessary PVC sheathed 3 core 1.5 Sqmm copper conductor flexible wire fixed complete.
S&F factory made epoxy powder coated switch disconnector fuse unit TPN with sheet metal enclosure confirming to IS 60947-3, 200Amps, positive isolation suitable for DIN & Bolted HRC fuse links fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and Earth bar and cable ties for cable management, top and bottom removeable gland plates with knockouts complete all as specified and directed by Engineer-in-Charge
M&L in replacement MCCB 125 Amps, 16 ka , 4P
S&F in repair sheet metal enclosure single pole and Neutral with a two pin earth plug and socket complete with a MCB SP 10 Amp 220 volts, 50 Hz, 10KA breaking capacity, including fixing completly in wall with sutable sand and cement, complete all as specified and directed.
Taking down cement plaster of any description on brick stone or concrete walls surfaces including raking out joints hacking for keys scrubing down with water etc complete all as specified and directed
M&L for preparation of newly plaster surface of wall and applying two coats of plastic emulsion paint over 2mm thick wall care putty complete all as specified and all as directed by Engr- in-charge.
M&L for preparation of newly plaster surface of wall and applying two coats of weather proof acralic exterior emulsion paint over 2mm thick wall care putty complete all as specified and all as directed by Engr- in-charge.
M&L for preparation of old decorated plastered surfaces of walls, brooming down,washing with water etc and applying two coats of weather proof acralic exterior emulsion paint over one coat of putty up to 10 m height complete all as specified and directed.
M&L for preparation of old decorated plastered surfaces of walls, complete removal of existing treatment by washing, rubbing etc and applying applying two coats of plastic emulsion paint over one coat of putty up to 10 m height complete all as specified and directed.
Dismantling of wall and ceiling/cup board fibre pulp AC boards etc any thickness including cover fillets removing the wiring and refixing the same including fixture as necessary at site including frame work complete all as specified and directed.
M&L Prelaminated HDMR particle board,18/19mm thick interior grade, prelaminated two side with decorative choice lamination & other side balancing white lamination incl teak wood leaping fixed with screws to timber frame work complete all as specified and directed.
S&F continuous (Piano) hinges, mild steel bright finish or electro glavanised (width of flap when open 30mm) complete all as specified and directed.
S&F 40mm dia cupboard knobs fixed with nut screw and washer of mild steel, bright finished complete all as specified and directed.
M&L second class hard wood timber scantling plain fillets, square, rectangular or triangular in section clear swan, sectional area exc 13 sqcm & not exc 25 sqcm, secured with nails or brads.
S&F 10mm thick tuffen glass pin head ordinary quality including provision of glazing pins/ spring clips / rubber bedding etc wherever necessary, complete all as specified.
M&L providing CM 1:2:4 Type B-0 12.5 mm graded agg. In precast coppings incl slightly rounded chemered angles and throating including necessary form work complete.
S&F in repair 150mm extruded brass handles, fabricated type polished complerte all as specified and directed by Engineer-in-Charge.
M&L two coat of wood polishing on new or old wood surfaces of any description, width or girth including cleaning and preparing the surface over a coat of wood filler complete all as specified and directed.
M&L anti termite treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and directed.
Dismentling plain or corrugated steel sheeting any gauge thickness including nainital or similar pattern roof covering complete all as specified and directed.
S&F for 2mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc. complete all as specified and directed.
S&F stainless steel mortise lock harmonus zinc alloy including all fitting and fixtures complerte all as specified and directed by Engineer-in-Charge.
S & F in repairs floor mounted EWC one piece incl all necessary fittings complete all as specified and directed by Engr -in-charge.
Excavation in trenches n exc 1.5m wide and n exc 1.50m in depth for foundation etc and getting out in soft/loose soil complete all as specified.
Returning filling in, incl spreading levelling watering and well ramming in layers n exc 25cm (after the pipes have been laid and tested) in soft/loose soil complete all as specified.
M&L cement concrete 1:3:6 type C1 (20mm graded stone aggregate) as in sub base, hard standing of 75mm thick, complete all as specified.
M&L cement concrete 1:2:4 type B1 (20mm graded stone aggregate) as in finished floor of 75mm thick, complete all as specified.
M&L for brick work with sub class 'B' brick straight or curved on plan exc 6 metre mean radius with old size bricks, built in cement mortar 1:6, complete all as specified.
M&L for brick work with subclass 'B' bricks, straight or curved on plan to any radius in half brick thick walls with old size bricks, built in cement mortar 1:4, complete all as specified.
M&L for cement concrete 1:2:4 type B1(using 20mm graded stone aggregate) as in blocks for hold fast, coping, benching etc. including weathering, slightly rounded or chamfered angles or throating including form work to concrete surfaces, complete all as specified
M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1 : 4 finished even and smooth without using extra cement complete all as specified.
M & L for 15 mm thick internal rendering in cement mortar 1:6 on fair face of brick walls/ concrete surfaces & finished even and smooth without using extra cement,applying three coats of white lime wash on newly plastered wall surface complete all as specified.
M & L for providing precast reinforced cement concrete jallies 40 mm thick including all mouldings type B-0 1:2:4(12.5mm graded stone aggreagte) set in cement mortar 1:4, complete all as specified.
S&F 15mm dia GI tubing medium grade with all fitting and fixed to wall and ceiling or laid in floors etc incl scafolding, cutting chases in wall where ever required etc complete all as specified.
S & F vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete including making good to floor complete all as specified.
S&F 20mm dia GI tubing medium grade with all fittings and fixed to wall and ceiling or laid in floors etc complete, all as specified.
S & F 100 mm dia (bore of pipe) cast iron (sand cast) soil, waste, vent pipe in any length with or without ears with cement joint fixed to walls, complete all as specified.
S&F110mm dia (bore of pipe) cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) with cement joints, complete all as specified.
S&F Salt Glazed Stone Ware (SGSW) gully traps square or round mouthed type size 150x150mm including excavation/earth work, bed concrete, surrounding concrete and CI grating, complete all as specified.
S&F 500 ltr capacity rotational moulded polyethylene water storage tanks triple layer (cylindrical vertical with closed top) hoisted and fixed in position with 20mm Ball brass valves,high pressure,with polythene float and flynut complete, screwed for iron pipe or brass ferrule Minimum wt 20mm-210grm and s&f in repair 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed.
M&L reinforced cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) (nominal mix) as in Slabs supported on walls, beams and columns in floors,roofs, landings, balconies, canopies, deck slabs and in shelves and the like including bonding agent , complete all as specified .
M&L form work to roof slab, chajja, weather shade, troughs and similar items including edges for rough finished surfaces of concrete flat, etc. complete all as specified and directed.
M&L form work to edges of concrete flats, treads, breaks in floors window cill, concrete railing opening in conc wall , floor and roof n.exc 20cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10 cm but n.exc 20cm wide for rough finished surfaces of concrete, complete all as specified.
Supply and fix TMT bars, 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) but not less than 0.9 mm dia conforming to Fe-410 - 0, complete all as specified.
M&L reinforced cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) (nominal mix) as in Lintels, beams, over 1.50 mtr and the like including bonding agent , complete all as specified.
M&L Sand filling (sand cushioning) under floors or in foundation incl watering and consolidation all as specified and directed.
M&L for PCC 1 : 2 : 4 type B2 using 20mm graded aggregates as in surfaces channels and drains complete all as specified.
Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement incl forms, moulds, mitred/stoped ends etc complete all as specified.
S&F DWCPE(SN8) 150mm dia (Internal Dia) pipes,snap fit coupler and rubber ring incl testing and laid and properly jointed laid in trenches to a level on concrete bed complete all as specified.
Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required for 100mm internal dia pipe, complete all as specified.
M&L for PCC 1:2:4 (using 20mm aggregate) type B-1 as in coping with plain fare faces finished even and smooth without using extra cement complete all as specified..
S&F for Precast plastic fibre RCC Manhole cover with frame medium duty of overall ize 450 x 450 x 50mm factory made complete all as specified.
Schedule of Credit
M/S MSD & Associate
M/s Verma and Co
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .