REPAIR MAINT OF INTERNAL ELECTRICAL WIRING REPLACEMENT OF FTL FITTINGS REWINDING OF CEILING FANS EXHAUST FANS AT INS UTKROSH, NTS TEYLERABAD, NAD DOLLYGUNJ, CHOULDARI AND PROTHRAPUR FILTERATION PLANT UNDER AGE EM NO II IN GE MINNIEBAY PB

Amount

Taking down carefully copper/aluminium point wiring (light, Fan, Socket or power) complete, fitting such as switches ceiling roses, pendants, regulators, Sockets etc removing unserveciable materials at site and making good disturbed surface to match with existing finish with plaster and applying white / colour wash / OBD / CBP as per existing at site as required of walls, floors roofs etc all as specified and directed.

Taking down carefully copper/aluminium Sub main wiring of size 1.5/2.5/4/6/10/16/25 Sqmm from surface/concealed /existing conduit of any height removing unserveciable materials at site and disturbed surface to match with existing finish with plaster and applying white / colour wash / OBD / CBP as per existing at site as required of walls, floors roofs etc all as specified and directed.

M&L for point wiring with Insulated unsheathed Cable 1.5 Sqmm multistranded FR copper conductor 1100 Volt grade IS-694 and drawing in and including steel conduit stove enamelled medium grade suitable dia with fixing materials, sunken terminal MS boxes of 2mm thick, laminated sheet cover 3mm thick and incl provision of earth wire PVC insulated unsheathed 1.5 Sqmm stranded FR copper conductor single core cable connected to common earth dolly along wall/roof including making good disturbed surface to match with existing finish with plaster and applying white / colour wash / OBD / CBP as per existing at site as required with 3 mm thick plastic laminated sheet top cover all as directed and specified for the following:-

One light/fan controlled by 5 Amp one way switch

One 3 pin socket out let 5 Amps on the same board

One 3 pin socket out let 5 Amps on the Independent board

One bell/buzzer point controlled by one push button on the Independent board

Additional light point on the same switch circuit

All as per item No 3 herein before but with 2.5 Sqmm single core multi standard copper conductor for one three pin socket 15 Amps on independent board including continuous earth wire PVC insulated 2.5 Sqmm copper solid conductor to common earth dolly.

All as per item No 3 herein before but with 4 Sqmm single core multi standard copper conductor for one three pin socket 20 Amps on independent board/ metal clad socket for AC point including continuous earth wire PVC insulated 4 Sqmm copper solid conductor to common earth dolly

M&L point wiring with 1.5 Sqmm (nominal area) pvc unsheathed multi stranded copper conductor pvc insulated 1100 volt FRLS grade multi stranded cable drawn through and including PVC casing caping/conduit ISI marked minimum 20mm size and its accessories complete along with 1.5 Sqmm cable but in green colour as continuous earthing wire and connecting to common earth dolly completely concealed ,surface, in walls/ceiling/roofs with and including 1.2 mm thick MS sheet terminal boxes duly fabricated flush mounting in the wall for mounting switches, switch socket combinations fan regulators etc., as required with 3 mm thick plastic laminated sheet top cover all as directed and specified for the following.

One light /fan/bell point controlled by one switch.

One 5 Amps plug point independent board controlled by one switch.

One three pin switch socket 5 Amps plug point on same board.

All as per item No. 6 above but with 2.5 Sqmm single core multi standard copper conductor for one three pin socket 5 Amps on independent board including continuous earth wire PVC insulated 2.5 Sqmm copper solid conductor to common earth dolly.

All as per item No. 6 above but with 4 Sqmm single core multi standard copper conductor for one three pin socket 15 Amps on independent board/ metal clad socket for AC point including continuous earth wire PVC insulated 4 Sqmm copper solid conductor to common earth dolly

S&F in replacement of switch piano, flush button type, single pole, one way15 amps complete all as specified and directed.

S&F in replacement of socket outlet 2-in-1, 3 pin, 5 and 15 amps, flush type complete all as specified and directed.

S&F in replacement of bell push 5 Amps for electric Bell/Buzzer, ding dong AC 230 Volt single pole complete all as specified and directed.

S&F in replacement of electric Bell, ding dong type AC 230 Volt single pole complete all as specified and directed.

Supply and fix in replacement of Switch Piano flush button type, single pole, one way 5 Amp complete all as specified and directed.

S&F in replacement of socket piano flush type 2-in-1 2/3 pin 5 Amps all as specified and directed.

S&F in replacement of sheet metal enclosure with socket plug top , single pole and neutral enclosure with two pin earth plug and socket complete with one MCB SP of capacity 20 to 32 Amps complete all as specified and directed.

S&F in replacement of ceiling rose, surface bakelite 65 mm x 30 mm, 3 terminals complete all as specified and directed.

S&F in replacement of Electronic dimmer type regulator 230 Volt step type complete all as specified and directed.

S&F in replacement of Switch socket combination 06 Amps complete all as specified and directed.

S&F in replacement of Switch socket combination 15 Amps complete all as specified and directed

M&L for Sub main wiring complete with 2x1.5 sqmm, single core, multi stranded copper conductor FR PVC insulated and sheathed cable 1100 Volts grade, drawn in PVC Casing Capping in surface /PVC conduit on surface (as required) along walls roofs etc including 1.5 sqmm size pvc insulated unsheathed copper earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed at site. Note for Item No. 20 to 26 :- (i) All three wire/cable(phase, neutral and earth) should be run through for each individual circuit from the DBs. (ii) Two run / four runs of cable and one run / two runs of earth conductor and PVC Conduit be measured as one length.

All as per item No. 20 above but 2X2.5 Sqmm and 1X 1.5 Sqmm for Earth wire

All as per item No. 20 above but 2X4 Sqmm and 1X 2.5 Sqmm for Earth wire

All as per item No. 20 above but 2X 6 Sqmm and 1X 4 Sqmm for Earth wire

All as per item No. 20 above but 2X10 Sqmm and 1X 6 Sqmm for Earth wire

All as per item No. 20 above but 4X16 Sqmm and 2X 10 Sqmm for Earth wire

All as per item No. 20 but 4X25 Sqmm and 2X 16 Sqmm for Earth wire

S&F in replacement of PVC Gang box with 5/15 Amp multipurpose Switch and Socket complete all as specified and directed.

All as per item No. 27 above but 5 Amps, 5 Pin

S&F in replacement of Cast Iron/pressed steel terminal boxes 60 mm deep 250mm by 300mm , 3mm thick rectangular with plastic laminated sheet cover complete all as specified and directed.

All as per Item No. 29 above but for 200X150mm size

All as per Item No. 29 above but for 175X100mm size

S&F in replacement of MCCB 415 V, 200 Amps, 36KA 3pole with thimbles/lugs and nut,bolts all as required at site and directed.

Supply and fix MCB DP 63 Amps, 240 Volts, 10 kA, 'C' Curve complete all as specified and directed.

Supply and fix MCB DP 32 Amps, 240 Volts, 10 kA, 'C' Curve complete all as specified and directed.

Supply and fix MCB DP 40 Amps, 240 Volts, 10 kA, 'C' Curve complete all as specified and directed.

Supply and fix MCB TP 40 to 63 Amps, 240 Volts, 10 kA, 'C' Curve complete all as specified and directed.

Taking down old /Unserviceable distribution board by disconnection of electric connection carefully SPN DBs, Main Switch including old models load star MCBs,Isolators,etc and making good to disturbed surface in all respect all as specified and directed.

Taking down Old Unserviceabl DBs TPN / Main Switches including old models load star MCBs, isolators,fuses,etc and making good to distrubed surface in all respect all as specified and directed.

Supply and fix in replacement of load line vertical DB TPN 8 way IP 43 IK-09 with metal double door suitable for Provision of MCCB, 4P 36 KA 160 Amp,housing MCB's complete all as directed.

Supply and fix in replacement of load line vertical DB TPN 12 way IP-43 IK-09 with metal double door suitable for Provision of MCCB, 36 KA 160 Amp for housing of MCBs complete all as directed.

Supply and fix in replacement of load line vertical DB TPN 4 way IP 43 IK-09 with metal double door suitable for Provision of MCCB , 36 KA 100 Amp for housing of MCBs complete all as directed.

Supply and fix in replacement of double door DB SPN 4 way IP 43-IK-09 with metal double door suitable for housing of MCBs complete all as directed.

Supply and fix in replacement of double door DB SPN 12 way IP 43-IK-09 with metal double door suitabl for housing of MCBs complete all as directed.

Supply and fix in replacement of double door DB SPN 8way IP 43-IK-09 with metal double door suitabl for housing of MCBs complete all as directed. Make -Legrand Cat Part No -607712/Simens or equivalent make mentioned in the list of makes in PS.

S&F in replacement of MCCB 415 V, 160 Amps, 36KA 3pole with thimbles/lugs and nut,bolts all as required at site and directed.

S&F in replacement of MCCB 125 415 V, 100 Amps, 36KA 3 pole and electric connection with copper/aluminium thimbles all as required at site and all as directed.

S&F in replacement of MCB TPN 6 to 32 Amps, 440 Volts, 10 kA, 'C' Curve complete all as specified and directed.

S&F in replacement of MCB TPN 40 to 63 Amps, 440 Volts, 10 kA, 'C' Curve complete all as specified and directed.

S&F in replacement of MCB Four Pole 100 Amps, 440 Volts, 10 kA, 'C' Curve complete all as specified and directed by.

S&F in replacement of MCB SP 6 to 32 Amps, 440 Volts, 10 kA, 'C' Curve complete all as specified and directed.

S&F in replacement of MCB SP 40 to 63 Amps, 440 Volts, 10 kA, 'C' Curve complete all as specified and directed.

Material and lobour for taking down and rewinding of ceiling fan of any make and model of 1200/1400 mm sweep complete with super enamelled copper wire of required size duly varnished with high quality varnish and testing all as specified and directed.

Material and lobour for taking down and rewinding of exhaust fan of any type and make with super enamelled copper wire of required size covered with high quality varnish complete of 300 mm sweep (12") including greasing /oiling and testing all specified and directed.

All as per item No. 53 above but for upto 450 mm sweep(18").

All as per item No. 53 above but for upto 600 mm sweep(24").

Material and lobour for taking down and rewinding of cabin fan/wall mounted fan of any make upto 450mm sweep with supper enamelled copper wire of required size covered with high quality varnish complete including greasing /oiling and testing to the entire satisfaction of Engr-in- Charge / GE.

Material and lobour for taking down and rewinding of Air circulator fan of any make , 600mm sweep with supper enamelled copper wire of required size covered with high quality varnish complete including greasing /oiling and testing to the entire satisfaction of Engr-in- Charge / GE.

Supply and fix in replacement of bearing of ceiling fans 1200/1400 mm of any size for proper running and testing all as specified and directed.

Supply and fix in replacement of Gun metal bushes for ceiling fans of size 1200/1400 mm including oiling and testing for proper running all as specified and directed.

Supply and fix in replacement of rotor shaft of ceiling fans of size 1200/1400 mm sweep all as specified and directed.

Supply in fix in replacement of ceiling fan stator of size 1200/1400 mm sweep size match to existing fan rotor of any make as per site requirment all as specified and directed.

M&L Painting of ceiling fans 1200/1400mm sweep with two coats of synthetic enamel paint by means of suitable spary gun after cleaning and prepairing the surfaces and marking the circular ring line 3 mm thick line with golden colour on bottom centre all as specified and directed.

All as per item No. 62 above but exhaust fan 300/450/600mm sweep.

All as per item No. 62 above but wall/padestal fan 300/450/600mm sweep.

S&F Exhaust fan single phase 1400 RPM 12'' sweep heavy duty complete with louver shutter and incl fixing water proof ply wood 12 mm thick of size 350X350mm for fan base after cutting 300 mm dia of suitable size all as directed.

All as per Ser Item No. 65 but 450 mm sweep 900 RPM

All as per Ser Item No 65 but 600 mm sweep 900 RPM

S&F in repair ventilating fan 250 mm sweep 230Volts AC with sturdy blades fully plastic body complete sound proof incl fixing water proof ply wood 12 mm thick of size 300x300 mm for fan base after cutting 250 mm dia of suitable size all as specified an directed.

S&F in repair single phase, 230 volts, 50 Hz, wall mounted fan, 400 mm sweep fixed on wall with fan clamp/hook, connecting electrically all as specified and directed.

S&F in repair Ceiling Fan 1200 mm sweep single phase 230Volt AC energy saving complete as per manufactrer specification complete all as specified and directed.

S&F in replacement of Padestal Fan 450 mm sweep single phase AC Energy saving complete as per manufactrer specification complete all as specified and directed.

S&F Bracket assembly of various sizes as required for hanging ceiling fan with rubber shackle nuts, bolts and split pin complete all as specified and directed.

S&F condenser 2.5 mfd including fixing of clamps with screws, sleeves etc complete all as specified and directede.

All as per item No. 73 above but 3.15 mfd

All as per item No. 73 above but 4 mfd

Supply and fix ceiling fan blades as per existing pattern (set of three) of size 1200/1400 sweep complete all as specified and directed.

Supply and fix Fan regulator step type electronic 250 volt AC complete all as specified and directed.

Supply and fix down rod of ceiling fan made upto 1 mtr long MS pipe medium grade including two coats of synthetic enamel paint over a coat of red oxide primer with bolts/check nuts, washers etc as per existing size and shape of fans incl New U hook with rubber reel with nut bolt and washer including drilling, threading complete all as specified and directed.

Supply and fix of canopy (set of two) for ceiling fans 1200 mm/1400 mm sweep complete all as specified and directed.

Supply and fix ceiling fan bottom cover suitable for 1200/1400 mm sweep with existing make and model complete all as specified and directed.

Supply and fix ceiling fan Top cover suitable for 1200/1400 mm sweep with existing make and model complete all as specified and directed.

Supply and fix exhaust fan blade as per existing make and model of size 300 mm sweep complete all as specified and directed.

All as per ser item No. 82 above but 450 mm sweep

All as per ser item No. 82 above but 600 mm sweep

Supply and fix wall fan blade as per existing make and model of 300 mm/450 mm sweep complete all as specified and directed.

All as per ser item No. 85 above but 600 mm sweep

Supply and fixing in replacement of Air circulator Fan 600 mm sweep single phase AC Energy saving complete as per manufactrer specification.

Earthing complete with GI earth electrode of size 60cmx60cmx6mm buried directly in ground vertically at a depth not less than 2.25 meter below normal ground level with top edge of earth plate at a depth not less than 1.5 meter below normal ground surrounded from all sides by 15 CM thick and packed layer of charcoal dust and common salt filling in alternate layers cleaned connected to and including GI earth wire 4mm size upto 7.5 mtr by means of bolts, nuts, check nuts and washers made of galvanised iron and protected light grade 20 mm bore for watering and including funnel wire mesh, RCC pit cover 50 mm thick and PCC chamber pit with PCC 1:3:6 type C-2 (including excavation and earth work disposal of surplus soil to a distance not exceeding 50 meter) and testing after completion all as specified and shown on plate No 3 of SSR Part-I 2009 all as specified and directed.

Supply and fix in security light fitting LED type, 20 Watts 240 Volts luminous shall be more than 2000 lumen, efficiency not less than 100 lm/Watt , and accessories complete mounted on 25 mm dia light grade GI pipe bracket 1.0 mtr long bent to shape, mounted on wall,connection complete including taking down old unserviceable CFL/tube light security light fitting all as specified and as directed.

S&F in repalcement 1x 20 W tube rod LED suitable for 1x 20W T/L fittings complete all as specified and directed.

S&F in repalcement 1x 18 W tube rod LED suitable for 1x 18W T/L fittings complete all as specified and directed.

S&F in repalcement 1x 10 W tube rod LED suitable for 1x 10W T/L fittings complete all as specified and directed.

S&F in replacement electronic ballast 10W/18W suitable for LED Tube light fittings complete all as specified and directed.

S&F in replacement electronic ballast 20W/33W suitable for LED Tube light fittings complete all as specified and directed.

S&F in replacement electronic driver 24/33W suitable for 24/33 W LED light fittings complete all as specified and directed.

S&F in replacement electronic driver 15/18W suitable for 15/18 W LED light fittings complete all as specified and directed.

S&F in replacement electronic driver 9/12W suitable for 9/12 W LED light fittings complete all as specified and directed.

S&F in replacement LED tube light fitting, 1x18 w, 230v. Surface and wall mounted LED batten, 2100lm PC Body tube housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver. & connecting up with twin core twisted flexible copper conductor cable with suitable size all as specified directed.

S & F in replacement of LED tube light fitting, 1x20 w, 230v .Surface and wall mounted LED batten, elegant dia cast for designer homes bright LED source with uniform light out put , 2400 lm , surge protection of 2 KV with wide voltage protection 160-360 V in provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver. & connecting up with twin core twisted flexible copper conductor cable with suitable size all as specified directed.

S & F in replacement of LED tube light fitting, 1x23 w, 230v .Surface and wall mounted LED batten, elegant dia cast aluminium batten for designer homes bright LED source with uniform light out put , 2400 lm , surge protection of 2 KV with wide voltage protection 160-360 V in provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver. & connecting up with twin core twisted flexible copper conductor cable with suitable size all as specified directed.

S & F in replacement LED light fitting, mrror light 1x12 w, 230v Helios type fitted on wall/surface complete all as specified and directed.

S & F in replacement LED light fitting, 1x33 w, 230v .2x2 recessed mounted genaral purpose squre shaped luminaire with high transmitivity diffuser suitable for office application with profiled & flat diffuser fiited on ceiling connecting up with twin core twisted flexible copper conductor cable with suitable size all as specified directed.

S & F in replacement LED light fitting, 1x12 w, 230v .down light recessed mounted genaral purpose squre/round shaped luminaire with high transmitivity diffuser suitable for office application with profiled & flat diffuser fiited on ceiling connecting up with twin core twisted flexible copper conductor cable with suitable size all as specified directed.

S&F in repairs modular white cover plate with frame 1 module as per existing make and model complete all as specified and directed.

S&F in repairs modular white cover plate with frame 2 module as per existing make and model complete all as specified and directed.

S&F in repairs modular white cover plate with frame 3 module as per existing make and model complete all as specified and directed.

S&F in repairs modular white cover plate with frame 4 module as per existing make and model complete all as specified and directed.

S&F in repairs modular white cover plate with frame 6 module as per existing make and model complete all as specified and directed.

S&F in repairs modular white cover plate with frame 8 module as per existing make and model complete all as specified and directed.

S&F in repairs modular metal flush box frame 1/2 module as per existing make and model complete all as specified and directed.

S&F in repairs modular metal flush box frame 3 module as per existing make and model complete all as specified and directed.

S&F in repairs modular metal flush box frame 4 module as per existing make and model complete all as specified and directed.

S&F in repairs modular metal flush box frame 8 module as per existing make and model complete all as specified and directed.

S&F in repairs fan regulator 120W, 2 module modular type as per existing make and model complete all as specified and directed.

Supply and fix Fluorescent tube light fitting. flameproof type FLP-WP of T5 2x36W including integral reflector made of alluminium alloy LM6, with electronic ballast, bipin holders, connector block, etc., and all accessories pre-wired and including connecting up with twin core twisted flexible copper conductor complete all as specified and directed.

Supply and fix Fluorescent tube light fitting. flameproof type FLP-WP of T5 1X36 W including integral reflector made of alluminium alloy LM6, with electronic ballast, bipin holders, connector block, etc., and all accessories pre-wired and including connecting up with twin core twisted flexible copper conductor complete all as specified and directed.

Supply and Fix flameproof Switch flame proof rotary type with termination box in LM6, 16A, single pole 250V complete all as specified and directed.

Supply and Fix flameproof 1Flame proof switch socket & plug combined in LM6 cable termination box in LM6, 16A,250V, 2P+earth complete all as specified and directed.

Supply and laying in replacement of alluminium sevice wire 6sqmm 2 core 1100 volts grade fixed on wall/roof etc complete all as specified and directed.