COMPREHENSIVE MAINT INCLUDING MISCELLANEOUS REPAIR OF MD ACCN OF BUDHWAR AND KHETRAPAL ENCLAVE UNDER AGE B/R-I OF GE (S) MAMUN

Amount

Notes : - Rate quoted in BOQ by contractor in respect of subject work against following items shall be inclusive of provision of Making arrangement for establishment of centralized complaint centre having a computer with necessary software in the existing building (Space for complaint cell/Office & Store will be Provided by the MES Department) suitable for online complaints as under :- (a) Contractor shall establish a web portal for online compaint system. Complaints shall be generated online. Contractor shall be given user ID and password for accessing the online complaint portal and contractor shall at his own expense by himself or his representative feed the data in respect of complaints so generated. (b) Manually registered complaints shall be obtained everyday from MES complaint cell and rectification or otherwise shall be intimated to JE in charge of the MES complaint cell for updation of manual registers. (c) Provision and maintenance of all tools, plants, equipment and safely gear required for tradesmen under this contract. (d) Provision of required communication and conveyance facilities to supervisor and tradesmen. (e) Monitoring and management of complaints, report from generation to execution of complaint including pending complaints. (f) Updating status of lodged complaints on a daily basis. (g) Basic inputs to be noted from the complainants shall be the locality, Building No., Qtr No., exact nature of complaint, Name and Rank of complainant and and mobile No/ telephone (h) On lodging the complaint, the Complaint No shall be assigned for reference. Also system should indicate an approximate time for repairs. Accordingly a corresponding complaint slip shall be generated by the system with all relevant info. Complaint slip should be printed in triplicate and to be handed over immediately to Supervisor who shall detail appropriate tradesmen for repair with required materials/store. One copy of complaint shall be retained in complaint centre and two copies with tradesmen. (j) On both copies of complaint slip, status of the complaint attended shall be endorsed by the complaint/user. One copy to be retained by the complainant and second copy to be with tradesmen for handing over in the complaint centre. Reasons for non attending of complaint etc shall be recorded alongwith estimate of expected time to attend and rectifying the complaint. (k) At the end of each day, summary of complaints shall be prepared and generated indicating No of complaints lodged, attended in time, Reasons for not attending, probable time required for attending the pending complaints etc (l) JE in charge of MES will review the complaints recorded in the system daily and will carry out personal inspection of complaints attended and its status and will take remedial measures in this regard. (m) AGE shall visit the complaint cell at least twice a week to check the efficacy of the system and record their remarks accordingly. (n) The tradesmen engaged in the contract shall be ITI qualified from a govt recognised institute and the contractor is required to get the same approved from Accepting Officer (before applying for their security passes) immediately on acceptance of contract. (o) All tradesmen shall be dressed in a common uniform and quoted rates should be inclusive thereof. Tradesmen not wearing uniform shall not be allowed in the gate and any loss on that account shall be attributable solely to the contractor and he shall have no claim on this account.

M&L for preparation of old plastered surfaces of walls by scrapping down smoke roots, molds salts and treading oil and greasy spots with wire brush incl removing all nails & washing with clean water down and and applying one coat of white wash complete all as specified & directed.

M&L for preparation of old plastered surfaces of ceiling by scrapping down smoke roots, molds salts and treading oil and greasy spots with wire brush incl removing all nails & washing with clean water down and and applying one coat of white wash complete all as specified & directed.

M&L for preparation of old plastered surfaces of walls by scrapping down smoke roots, molds salts and treading oil and greasy spots with wire brush incl removing all nails & washing with clean water down and applying one coat of washable Distemper white or tinted complete all as specified & directed.

M&L for Complete removal of existing treatment from walls by manual or mechanical means incl repair and applying two coats of Antifungal /anti algae exterior weather paint, white or tinted incl one coat of primer ovber a layer of 1 mm thick cement based wall care putty complete all as specified & directed.

M&L for prepration of old steel surfaces of any description, not other wise described over 10 cm width or girth and applying one coat of synthetic enamel paint, white or tinted complete all as specified.

M&L for prepration of old wooden surfaces of any description, not other wise described over 10 cm width or girth and applying one coat of synthetic enamel paint , white or tinted complete all as specified.

M&L for preparation of old plastered surfaces of ceiling by scrapping down smoke roots, moulds salts and treading oil and greasy spots with wire brush incl removing all nails & washing down with clean water and applying one coat of washable Oil Bound Distemper, white or tinted complete all as specified & directed.

M&L for Preparation of old plastered surfaces of ceilings by scrapping down smoke roots, moulds salts and treading oil and greasy spots with wire brush incl removing all nails & washing down with clean water and applying two coat of washable Oil Bound Distemper, white or tinted over and including a layer of 1 mm thick cement based wal care putty complete all as specified & directed.

M&L for complete removal of existing treatment from walls and applying two coats of oil bound distemper , white or tinted, over and incl 1 mm thick cement based wall care putty to receive true smooth surface complete all as specified & directed.

Taking down cement plaster on brick walls or stone walls any description etc including raking out joints, hacking for key, scrubbing down with water etc all as specified and directed.

M&L for rendering 15 mm thick plaster in cement mortar 1:4 mixed with WPC @ 200 ml/ 50 kg bag of cement on brick or concrete surfaces and finished even and smooth without using extra cement complete all as specified & directed. Note: WPC shall be measured separately as Supply only

M&L for rendering 15mm thick cement plaster on faces of brick work or concrete surfaces in cement mortar (1:6) finished even and fair without using extra cement complete all as specified & directed.

Demolition of brickwork or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc., but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as specified & directed.

M&L for Brickwork with Fly Ash Bricks (old size), straight or curved on plan exceeding 6 metre mean radius built in cement sand mortar 1:6 complete all as specified.

All as per description of serial item No. 15.00 here-in-before but except bricks. Note :- Old serviceable bricks retrieved by demolition of brickwork shall be re-used.

M&L for rendering or plastering work 10mm thick in cement mortar 1:3 mixed with WPC @ 0.200 ltr per 50 Kg of cement in fascia or edging of Chajjas, ceiling and roof proIections etc, including taking out peeled off plaster / concrete incl roughening old concrete surface and making the line in true shape and finishing the surface without using extra cement complete all as specified and directed. Note: WPC shall be measured separately as Supply only

M&L for preparation of new plastered surface of walls, making the surfaces smooth by applying 1mm thick wall care putty and applying two coats of oil emulsion distemper over a coat of chalk whitening primer, complete all as specified & directed.

M&L for preparation of new plastered surface of external wall surfaces and applying two coats of anti fungal /anti algae exterior weather paint over and including a coat of primer omplete all as specified & directed.

M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for preparation of new plastered surface of ceiling, making the surfaces smooth by applying 1mm thick wall care putty and applying two coats of oil emulsion distemper over a coat of chalk whitening primer, complete all as specified & directed.

M&L for 75 mm thick PCC 1:3:6 type C-2 using 20 mm graded stone aggregate as in sub base of flooring, surface finished even and rough to receive top finish complete all as specified and directed

M&L for PCC 1:2:4 type B-1 using 12.5mm graded crushed stone aggregate as in kerbs or mud stops, rounded or chamfered on edges all as specified and directed.

M&L for coloured Machine pressed pre-cast rubber moulded concrete interlocking paver blocks any shape and size as approved, with cement layer mixed with pigment and coated with epoxy coating having high glossy finish confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade, laid dry over and including 50mm thick cushion of screeened, washed river sand complete all as specified and directed.

Dismantling floor, hearth or wall tiling and terrazo topping incl cement mortar bedding (but not backing) removing serviceable tiles and rubish off the premises, complete all as specified and directed.

M&L for roughening surface of old concrete by picking, sweeping clean and washing down with water to remove all loose dust etc.and applying brushing neat cement slurry with 3.00 kg of cement per sqm complete all as specified and as directed.

M&L for light shade vitrified tiles 8 to 9 mm thick (Square or rectangular), joint free, polished, area of each tile not exceeding 0.36 sqm, in floor etc, set and jointed in neat cement slurry and pointed in coloured cement. laid over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.

M&L for light shade vitrified tiles 8 to 9 mm thick (Square or rectangular), joint free, polished, area of each tile not exceeding 0.36 sqm, in skirting etc set and jointed in neat cement slurry and pointed in coloured cement laid over and including incl 10mm thick rendering in cement mortar 1:4) incl taking down cement plaster on walls etc complete all as specified and as directed.

M&L for non skid ceramic jointless coloured tiles, 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.18 sqm but nexc 0.38 sqm in floor etc set & jointed in neat cement slury & pointed in white or coloured cement mixed with pigment to match, laid over and including 15mm thick screed layer in cement mortar 1:6, complete all as specified and directed .

M&L for non skid ceramic jointless coloured tiles, 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.18 sqm but nexc 0.38 sqm in skirting etc, set & jointed in neat cement slury & pointed in white or coloured cement mixed with pigment to match, laid over and including 10mm thick cement screed in cement mortar 1:4, complete all as specified and directed .

M&L for Vitrified light shade ceremic tiles 600mmx1200mmx 10mm thick (Square/rectangular) polished in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over & including 15mm thick screed bed in cement mortar 1:6, complete all as specified & directed.

M&L for Vitrified light shade ceremic tiles 600mmx1200mmx 10mm thick (Square/rectangular) polished, area of each tile not exceeding 0.36Sqm in skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over & including 10 mm thick rendering in cement mortar 1:4, complete all as specified & directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (Square/rectangular) in floor etc, area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15mm thick screed bed in cement mortar 1:6 all as spd and directed.

M&L for glazed ceramic coloured tiles of size 450mmx300mm, thickness 7mm as in vertical surfaces such as skirting, dado, wall etc., set and jointed in neat cement slurry and pointed with coloured cement to match, laid over and including 10mm thick rendering in cement mortar 1:4, complete all as specified & directed.

M&L for machine cut kota stone slab flooring 18 to 20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and incl rendering 10mm thick in cement mortar (1:4) on brick or concrete surfaces complete all as specified & directed.

M&L for machine cut Kota stone slab not less than 16mm thick as in riser of steps, skirting, dado and pillar laid over & including 10 mm thick screed base in cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, grinding and polishing to yield mirror finish with machine, complete all as specified.

M&L for Granite (of any type ) work 20mm thick (table rubbed and polished) in cooking plateform, window cill, Iambs, steps and like in CM 1:4 over and 15 mm thick screed in Cm 1:6 incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with Granite shade including rounding the exposed edege full round complete all as specified and as directed.

M&L for Marble work 18mm to 20mm thick (table rubbed and polished) in cooking plateform, window cill, Iambs, steps and like in CM 1:4 over and 15 mm thick screed in CM 1:6 incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of green/ Black Marble Bhaislana Zebra including rounding the exposed edege full round complete all as specified and as directed.

S&F in repair 15mm bore tubes medium grade galvanized ISI marked with all fittings and fixed complete to walls, floor, ceiling including taking down unserviceable tubing etc complete all as specified and directed.

S&F GI pipe 32 mm dia light grade in short length as spout pipe in sunken floor slab laid in slope to brick wall with PCC 1: 2:4 type B-1 using 20 mm graded stone aggregate complete all as specified and directed.

S&F in repairs Vitreous china wash down water closet pan pedestal pattern, white (excluding supply of flushing cistern and flush pipes, but including fixing there of), including making connections to trap, and to flush pipe incl plastic seat cover closed pattern with stainless steel or aluminised hinging device complete all as specified and directed.

Supply & fixed in repair, Vitreous china wash basin, white flat back, size 550 x 400 mm excl taps, waste chain and plug and porcelain stopper but incl brackets.Complete all as specified and directed

S&F in repairs oval type Counter Down Vitreous china wash basin, white of,size 550 x 400 mm including 32 mm bore CP waste pipe long screw thread and 32 mm dia flexible waste pipe incl fixing of taps complete all as specified and directed.

S&F in repair fancy type angular Stop cock 15mm bore pipe, chromium plated cast copper alloy complete all as specified and directed.

S&F in repair fancy type Bib tap fixed to and suitable for 15 mm bore pipe, cast copper alloy chromium plated complete all as specified and directed.

Supply & fixed in repair Push botton type dual flush type PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and push botton (incl brackets & flush pipe PVC 32 mm dia) capacity of 10 Litres complete all as specified and directed.

S&F corrugated waste pipe, 32 mm dia, suitable for WHBs/sinks/Urinal, including threaded PVC socket suitable for shank of waste coupling complete all as specified and directed.

S&F in repairs CP Brass shower rose 200x200 mm size with flexible brass arm 450-550mm long fixed to and suitable for 15 mm bore pipe complete

S&F in repairs chromium plated brass central hole single lever WHB Mixer 15 mm bore for mixing hot and cold water with 450 long braided house 20 cartriage size screwed down, high pressure screwed for iron pipe complete all as specified and directed.

S&F in repairs chromium plated brass non telephonic mixer 15 mm bore for mixing hot and cold water screwed down, high pressure screwed for iron pipe complete all as specified and directed.

S&F in repairs chromium plated brass telephonic mixer with 15 mm bore for mixing hot and cold water screwed down, high pressure screwed for iron pipe complete all as specified and directed.

S&F in repair high grade of stainless steel folding towel rack for bathroom, size of rack 50.2 x 36.6 x 5.8 cm with 4 double cross towel hook and swivel towel bar complete all as specified and directed.

S&F in repair SS bottle trap of 32 mm dia with 190 mm/250mm long wall connection pipe and wall flange including full thread 32 mm pop up waste coupling complete in all respect as per manufacturer complete as specified and as directed.

S&F in repair 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight - 210 gms) complete all as specified and directed.

S&F in repairs 25mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed.Minimum weight - 210 gms) complete all as specified and directed.

S&F in repair glass self straight with CP railing 20'' with CP Brass Bracket, complete all as specified and directed.

S&F in repair corner glass corner shelf quarter round with CP Brass Bracket, complete all as specified and directed.

S&F in repair health foucet hand shower 8mm dia 1mtr long flexible pipe, hook and wall hook complete all as specified and directed.

S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F Anticocroach grating of stainless steel, size 100mm dia (As per sample) fixed in repair incl making good to existing floor complete all as spd and directed.

S&F in repair PVC toilet seat cover, heavy grade, soft touch, and automatically close and noise proof hydraulic incl hinges complete all as specified and as directed.

S&F in repair Plastic water closet seat cover, back closed pattern with flat bottom, and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repair Stop valve concealed type cast copper alloy (ISI Markd) fancy type, chromium plated with long shank and cup screwed down high pressure with capstan head screwed both ends for iron pipe 15mm bore dia complete all as specified and directed.

Taking down existing roof treatment of any description incl mud phuksha or PCC pedding if any (any no of layers) including removal of debries to a distance exc 1.00 KM but n exc 2.00 KM and disposed off in low laying area complete all as directed.

S&F Wire netting of stainless steel wire 0.71 mm dia wit size of mesh 25mm fixed with tinned tacks of stainless steel wire staples

M&L for cement concrete 1:1.5:3 type A-0 (using 12.5 mm graded stone aggregate) mixed with WPC @200ml/ 50 bag of cement as in leveling course on existing roof, rounded and chamfered on edges, complete all as spd and directed Note: WPC shall be measured separately as Supply only

M&L for APP modified roof treatment over existing non-accessible RCC roof slab / chaIIah / canopy / parapet wall to be executed through approved applicator of the membrane manufacturer with following specification etc complete all as specified and directed :- (a) Cleaning the top surface of RCC roofing properly with water complete. (b) Applying Oil bound bitumen primer @ 0.30 liter/Sqm manufacture by the same agency as that of APP with a density 0.87-0.89 Kg per liter at 25 degree centigrade on prepared surface. (c) Laying of membrane not less than 3.0 mm thick APP modified water proofing membrane weighing not less than 3.60 Kg/Sqm reinforced with non woven polyster fiber weight not less than 160 Gms/Sqm using butane torch by torch application with 10 Cm side laps and 15 Cm end lap complete. (d) APP membrane shall be laid using butane torch by Torch application with minimum 10cm side overlap and 15cm end lap. (e) Top of membrane shall be provide with solar reflective bituminous aluminum paint @ 0.1 Kg /Sqm as prescribed by manufacture of membrane. (f) APP Membrane shall be stick inside parapet where available by chase cutting and sealed with PCC (1:2:4) type B-0 complete.

S&F in repairs toilet seat/commode hand free jet spray (regular type) (1.5 mtr) complete all as specified and directed.

S&F in repairs CP soap dish fixed to walls with chromium plated (CP) brass screws complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fitting ,head ,shoes ,bend, swan-nacks etc., including cleaning or refixing or removal to store complete all as specified and directed.

Supply & fixed 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with suitable size clamp / laid in trench complete all as specified and directed.

S&F PVC (SWR) bend with ovel accessed door any radius 110mm dia bore complete all as specified and directed.

Supply & fixed 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with suitable size clamp / laid in trench complete all as specified and directed.

Supply & fixed, 75 mm bore PVC (SWR) bends any radius, with or without excess door complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n. exc. 1.5 Sqm each and removing from site complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc. 1.5 Sqm but n exc. 4.00 Sqm each and removing from site complete all as specified and directed.

Taking down shutters of any description n exc 1 Sqm each and removing from site complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm but n exc 2 Sqm each and removing from site complete all as specified and directed.

Taking down shutters of any description exc 1.00 Sqm and not exc 2.00 Sqm each and refixing in same opening (incl easing and adhustment and minor repair) complete all as specified & directed.

S&F factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30 mm thick size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S `screws shall be paid separately

Providing and fixing 35mm thick factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)

S & F SS wire gauged door shutter, factory made box type hollow section style and rails of size 40mm x 40mm by 2 mm thick SS wire gauged skeleton shutter with SS with Hollow section square guard bars of size 15mm x15mm by 2 mm thick incl fixing of shutter to the existing wooden/WPC frames with necessary arrangements and with 04 Nos. SS Butt hinges of required size and SS screws incl fixing of 02 Nos 300 mm long SS sliding door bolt with hasp and staple and 02 Nos 125 mm size SS handles complete all as specified and directed by Engr in charge. Note- SS wire cloth shall be measured and paid separately.

S & F Galvanised SS wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with SS wire staples complete all as specified.

S F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp?ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S & F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp?ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F of 35mm thick single piece Factory made wire gauge door shutters including of wire cloth (steel & aluminium XPM) manufacturing by PVC sheets printed 5mm thick on both side on frame made out of M.S tube 19 SWG, size 19mm x19 mm complete in all respect with lock rail and beautified by PVC beading all around fixed with PVC solvent cement complete all as per Drawing No CEPZ/TD-378/ ,Sheet 1/1 dated 27/12/2011 complete all as specified and as directed by Engr-in-Charge.

S&F for 35mm thick 2nd class hard wood (Sal/Hollock), glazed and skeleton shutters (factory made), open rebated and prepared to receive glass or wire gauge etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., size of members of shutters as specified in clause 8.24 (a) of SSR Part-I, complete all as specified & directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail;Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and Ioined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&FSolid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

Supply and fixing factory made 18mm thick WPC(wood particle composit) sheet one side prelam sheet and other side wood nature colour for cupboard shutter of density 600 kg /Cbm bent 90° incl 100% termite/water proof, fire rertradent, Eco friendly, and finish at all edges at level for making edges lipping using binding tape etc. Complete as per direction of Engr-in-charge, Manufacture specification.Note-Binding tape shall be measured and paid separately.

Supply and fixing factory made 5mm thick PVC sheet one side prelam sheet for kitchen cabinet/cupboard of density 600 kg /Cum bent 90° complete all as specified and directed.

S&F aluminium alloy, anodised sliding door bolt with hasp, staple ( bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded setion or cast aluminium alloy and fixed 300 mm long complete all as specified & directed.

S&F in repair Toilet paper holder with flat recessed type stainless steel fixed to walls with brass chromium plated Complete all as specified and directed

S&F anodised aluminium berrel tower bolt extruded section 200 mm size complete all as specified & directed.

S&F anodised aluminium handle cast type 125 mm size complete all as specified & directed.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty or fixed with bead/glazing pins in squares size n.exc 0.5 sqm in each pane including hacking out old broken glass any thickness, size or quality complete in all respect as specified and directed.

S&F 0.80 mm thick PVC edge binding tape around the 18 to 20 mm thick PVC shutter edge colour as directed, complete all as specified and directed.

S&F 100 mm long aluminium handle cast type anodised complete all as specified and directed.

S&F continuous (piano) hinges, mild steel, bright finish width of flaps (when open) 40 mm all as specified and directed.

S&F 100mm size hasp and staple, aluminium anodised safety type, fixed with screws complete all as specified and directed

S&F 50 mm dia polished hardwood knobs fixed with screws complete all as specified and directed.

S&F Magnet ball catcher for cupboard shutter, complete all as specified and directed.

S&F stainless steel plain basket of size 17'' x 20'' x 8'' complete all as specified and directed by EIC.

S&F stainless steel plain partion basket of size 17'' x 20'' x 6'' complete all as specified and directed .

S&F stainless steel cutlery basket of size 17'' x 20'' x 4'' complete all as specified and directed

S&F stainless steel plate/thali basket of size 17" x 20" x 8" complete all as specified and directed

S&F stainless steel cup & soucer basket of size 17" x 20" x 4" complete all as specified and directed .

S&F stainless steel plain basket of size 17'' x 20'' x 6'' complete all as specified and directed.

S&F 20'' long telephonic slider to facilitate drawer slide of steel ball bearing fixed with steel screws complete all as specified and directed by EIC.

S&F 14'' long telephonic slider to facilitate drawer slide of steel ball bearing fixed with steel screws complete all as specified and directed by EIC.

S&F in repair 25 mm bore stainless steel powder coated, curtain rod thickness not less than 1mm including fancy type brackets, funnels etc suitable for curtain rod, fixed in repair, etc complete all as specified and approved by GE.

S&F Mild steel, 300mm, ordinary rat tail rod patttern springs includding roller and roller plate complete fixed with screw or necessary welding to pressed steel door frame complete all as specified and directed.

S&F anodised aluminium Butt hinges 100 mm long, hinges pin and fixed complete all as specified.

M&L for repair to Old steel window not exc 2.00 Sqm each incl replacement of hinges, Handle, and necessary oiling, welding to shutter and chowkhat for making window in serviceable condition, Complete all as specified

S & F in repair aluminium touch lock for aluminium sliding window required as per site complete all as specified and directed.

M&L for repair to table dressing with mirror 5 mm thick of 355x1220 mm complete incl hanging to wall and repair to drawers, replacement of knobs, complete all as specified and directed. Note: WPC board provided to repair the drawer shall be measured and paid separately in the respected items.

S&F rubber lining fitted with aluminium powder coated strip, 100mm wide for door cill complete all as specified and directed.

S&F stainless steel peg set of six of size 400mmx30mmx3mm size fitted with machine screw and wooden and plastic cleats (minium wt 190gms) complete all as specified and directed.

Supply only Aluminium (extruded section body) Door closer hydraulically regulated, designation No. 1 universal type, suitable for door shutters up to 700 mm in width and of weight not more than 35 kg and fixed all as specified and directed.

S&F floor door stopper of 140mm long cover plate of aluminium alloy body and tongue anodised with hard drawn steel spring, fixed in floor complete all as specified and directed

S&F in repair Brass CP towel rail 20mm dia 'D' type 60 cm long between flanges complete all as specified and directed.

Supplied and fixed sink with drainage board made of stainless steel 1 mm thick with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets of angle iron or fixing in cooking plateform and gape fill with white cement and connecting union to pipe over all size 915 mm x460 mm and bowl size 400mmx300mmx 180mm complete all as specified and directed.

S&F in repair glass sliding shutter with standard aluminium channel having suitable channel sliding plain glass with catcher complete all as directed.

Demolition of cement concrete (unreinforced) of any description and in any position not specifically provided for complete all as specified and as directed.

M&L for Cement concrete type C-1, 1:3:6 (using 20mm graded aggregate) as in plinth protection and paving 75mm thick laid in slope finished even and fair incl making joints at every 2.5 m and at corner filled with bitumen 85/25 and sand in ratio 1:2 by weight and complete all as specified

M&L for 50mm thick PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in floor finish including finishing the surface of concrete topping even & smooth without using extra cement incl making joints at every 2.5 m in both directions and filled with bitumen 85/25 grade and sand in ratio 1:2 by wt complete all as specified.

M&L for 15 mm thick plaster in CM 1:4 with intergral water proofing compound and applying 75 mm thick padding and junction coved filling of PCC M-20 Nominal Mix (1:1.5:3) of 12.50mm Agg on the junction of floor and wall the surface shall then he cured and allowed to dry . Apply Epoxy Resins Coating, polymer Modified Cementation coating like brush bond of frsroc,pedilite and bostic as per manufactures instruction both on floor as well as on wall complete all as specified and directed

Supply only liquid water proofing compound conforming to relevant IS complete all as specified and directed.

M&L for Cement concrete 1:5:10 type E-2 (using 40mm graded crushed stone aggregate) as in mass filling in sunken slab of toilets, complete all as specified and directed.

M&L for preparation of new wood or wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F in repair Rotational moulded polyethlene water storage tanks three layers of 500 ltrs capacity ISI marked (cylindrical vergical with closed top) hoisted and fixed in position all as specified in SSR Part I including 20mm thick Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 20mm-210 gms including dismantling of old brocken water tanks and refixing of inlet, outlet & over flow pipe etc complete all as specified and as directed.

S&F in repairs towel Ring round with round flange of brass chromium plated including brackets. complete all as specified and as directed

S&F Butt hinges 100 mm long, stainless steel, medium weight with SS hinges pin and fixed complete all as specified.

S&F stainless steel kitchen plate rack made of 1.00 mm thick sheet of size 24"x24" incl shelves, rod to put plates etc and fixed to wall complete all as specified.Make:Nirali or equivalent.

M&L for Accessible , Sloped & Exposed Terrace, Deck Slab as under:- (a)Removal of Existing PCC/Brick Bat Coba/Mud phuska/ APP membrane from the roof stacking the reusable material and disposal of unserviceable rubbish out site the campus as per direction of the client with in 3 Km. (b) Cleaning of surface of loose dust and dirt cement slury etc. by means of wire brush, dust removing brush and scraper etc.In case of Pot Holes/ Cracks same shall be repaired with cement with cement admixed with Polymer as per manufacturer instructions etc. (c) Gola on Mother Slab: Providing and Making of PCC coving (gola) of size 75mm X 75mm with concrete Mix (1:2:4), cement sand, grit and including cost of mixing water proofing compund of approved make etc. complete as per direction by engineer in charge.

Contd... (d) The surface shall be primer with Smart care epoxy primer to seal the pores and enhance the adhesion of the coating. Supplying and applying single component water proofing liquid membrane based on pure elastomeric, polyutherine resin smart care pu magnum us, cold applied of spray/ brush applied, membrane with elogation > 600% and tensile strength of 3-4 Mpa as per Astm D 412. crack bridging ability of 3mm as per ASTM C1305, no leakage upto 5 bars of water pressure as per DIN 1048, shore A Hardness > 50 Shore as per ASTM D 2240. The minimum thickness to be applied shall be 1.5mm. (e) Providing & laying of protective Geotextile fabric 150 GSM over the entire membrane with proper overlaps of 75mm before of Brick bat coba treatment. (f) M&L for Non skid ceramic jointless coloured tiles, 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.11 sqm but nexc 0.18 sqm in floor etc set & jointed in neat cement slury & pointed in white or coloured cement mixed with pigment to match over and including 20mm thick screed layer in cement mortar 1:6, complete all as specified and directed .

M/S TARA CHAND CONSTRUCTION CO. (BID ID -3321234)

M/S VIJ CONSTRUCTION CO (BID ID -3329137)

M/s. Ram Pal Sharma (BID ID -3321054)