GE/863/EWS-T-42 OF 2021-22

Amount

Taking down carefully copper/aluminium point wiring from existing points (light, fan, socket or power) alongwith compete fittings such as switches ,ceiling rose, pendent holder, sketcth fitting & regulator etc including making good to the distrurbed surfaces of wall, roof and floor etc to match with the existing surfaces complete all as specified and directed .

Taking down unserviceable submain wiring alongwith batten /PVC conduits etc and making good to disturbed surfaces of walls/floors and match the existing surface complete all as specified and directed .

Taking down carefully old MCB s/Isolators, DB's, Changeover etc. any type by unscrewing from board complete all as specified and directed.

M&L for point wiring using approved colour coding as per IS with using approved copper wire of 1.5 Sqmm multistranded,1100 volt grade, copper conductor cable of FRLS PVC insulated and unsheathed type alongwith 1.5 Sqmm FRLS PVC insulated stranded copper conductor cable for continous earthing in & incl PVC casing & caping with accessories fixed on wall surfaces / ceiling including provision of 2 mm thick sheet metal terminal box with 3 mm thick hylam laminated sheet on top for fixing switches sockets etc. for one light point/ fan/ Bell point controlled by one switch complete all as specified and directed .

All as per Srl item No: 4 here-in-before but controlled with one 3 pin socket outlet 5 Amp on the same board with other switches with cables 1.5 Sqmm .

All as per Srl item No: 4 here-in-before but controlled with one 3 pin socket outlet 5 Amp on the independent board with other switches with cables 1.5 Sqmm .

All as per Srl item No: 4 here-in-before but controlled with one 3 pin socket outlet 15 Amp, independent board with other switches with cable 2.5 Sqmm .

S&F switch piano type 5 Amp, 230 Volt, flush button, single pole one way complete all as specified and directed .

S&F socket outlet 3 pin 5 Amp, 2-in-one, 230 Volt, flush type complete all as specified and directed .

S&F switch piano type 15 Amp, 230 Volt, flush button, single pole, one way complete all as specified and directed .

S&F socket outlet 3 pin 15 Amp 2-in-one 230 Volt ,flush type complete all as specified and directed .

S&F Switch socket combination 2 in 1, 5 A flush type complete all as specified and directed .

S&F Switch socket combination 2 in 1, 16 A flush type complete all as specified and directed .

S & F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. complete all as specified and directed.

S&F in replacement of switch piano type 5 Amp, 230 Volt, flush button, single pole one way complete all as specified and directed .

S&F in replacement of socket outlet 3 pin 5 Amp, 2-in-one, 230 Volt, flush type complete all as specified and directed .

S&F in replacement of switch piano type 15 Amp, 230 Volt, flush button, single pole, one way complete all as specified and directed .

S&F in replacement of socket outlet 3 pin 15 Amp 2-in-one 230 Volt ,flush type complete all as specified and directed .

S&F in replacement of Switch socket combination 2 in 1, 5 A flush type complete all as specified and directed .

S&F in replacement of Switch socket combination 2 in 1, 16 A flush type complete all as specified and directed .

S & F in relpacement stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. complete all as specified and directed.

S&F in relpacement surface mounting PVC gang box 2 ways (3 Module) suitable for mounting 5 Amps switch & socket complete all as specified & directed.

S&F in relpacement surface mounting PVC gang box 2 ways (4 Module) suitable for mounting 15 Amps switch & socket complete all as specified & directed.

S&F in relpacement surface mounting PVC gang box 4 ways (6 Module) suitable for mounting 2 Nos, 5 Amps switch & socket complete all as specified & directed.

S&F in relpacement surface mounting PVC gang box 5 ways (6 Module) suitable for mounting 5 Amps switch & socket complete all as specified & directed.

S&F in relpacement surface mounting PVC gang box 4 ways (4 Module) suitable for mounting 5 Amps switcht complete all as specified & directed.

S&F in relpacement surface mounting plastic body junction box (urea back piece) with combined switch/socket (with shutter) of 20Amps, white colour and 4 fixing points complete all as specified and directed. Make: Anchor Cat No: 39998 or equivalent make as per Appx 'B' as approved.

S&F in replacement LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified & directed .

S&F in replacement of LED light fitting 2 feet, 10 watt , 220 V , AC , batten with polycarbonate housing and intigrated electronic driver,and LED tube including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed .

S&F in replacement of LED light fitting 1x9W/1X10W bulkhead luminaires with IP 65 protection including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed .

S&F in replacement of LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency, PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver and three core flexible copper conductor cases of suitable size complete all as specified and directed.

S&F Bell push flush type 5/6 Amps complete all as specified and directed .

S&F Bell, ding dong type, AC 230 volt single pole, complete all as specified and directed.

M&L Ceiling rose, 3 terminal with ISI mark complete all as specified and directed .

S&F Boxes junctions, plastic, round, four terminals complete all as specified & directed.

M&L lamp holder, PVC/ Polycarbonate type with back plate suitable fo batten fittings complete all as specified and directed .

S&F in replacement of Bell push flush type 5/6 Amps complete all as specified and directed .

S&F in replacement of Bell, ding dong type, AC 230 volt single pole, complete all as specified and directed.

M&L in replacement Ceiling rose, 3 terminal with ISI mark complete all as specified and directed .

S&F in replacement Boxes junctions, plastic, round, four terminals complete all as specified & directed.

M&L in replacement lamp holder, PVC/ Polycarbonate type with back plate suitable fo batten fittings complete all as specified and directed .

Supply and fixing in replacement sheet metal enclosure, double door for DBs, single pole and neutral for 8 way 240 volt complete all as specified and directed.

All as per item No: 42 here-in-before but for 4 way.

Supply and fixing in replacement amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB with connection testing and commissioning complete all as specified and directed.

SP 5 To 32 AMP

SPN 32 AMP

SPN 40 to 63 AMP

Supply and fixing in replacement amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of TPN, 40 to 100 Amps capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

All as per item No: 45 here-in-before but of TPN, 16 to 32 Amps capacity.

S&F in replacement Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 20 Amps, complete all as specified & directed.

M&L submain wiring with cable insulated single core multistranded FRLS copper conductor cable 1100 Volts grade, 2 runs of 4 Sqmm and one run of 4 sqmm as earth wire all drawn through & incl PVC conduit of suitable size medium grade complete all as specified and directed. Note: clamps, conduit pipe & connected accessories are deemed to be included in quoted rate.

M&L submain wiring with cable insulated single core multistranded FRLS copper conductor cable 1100 Volts grade, 2 runs of 4 Sqmm and one run of 4 sqmm as earth wire all drawn through & incl PVC casing caping of suitable size medium grade complete all as specified and directed. Note: clamps, conduit pipe & connected accessories are deemed to be included in quoted rate.

M&L submain wiring with cable insulated single core multistranded FRLS copper conductor cable 1100 Volts grade, 2 runs of 6 Sqmm and one run of 4 sqmm as earth wire all drawn through & incl PVC conduit of suitable size medium grade complete all as specified and directed. Note: clamps, conduit pipe & connected accessories are deemed to be included in quoted rate.

M&L for Earthing complete with galvanised steel earth plate electrode 60cmX60cmX 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of SSR Part I,connected to earthing test point all as specified or indicated including testing on completion ,necessary excavation, earthwork, PCC works in 1:2:4 type B-1, form work and CI earth pit cover with watering pipe 20 mm dia GI Pipe medium grade, funnel with wire mesh and lugs, GI Pipe of 15 mm dia of light grade for protection of earth wire including dismentaling of old earthing complete all as specified and directed.

Taking down ceiling fan (C/F of any size/make) for repair/rewinding, cleaning its dust & oil properly, oiling and hanging the same back to its original position after completing the wiring including connecting the wire to ceiling rose etc complete all as specified and as directed . Note :- (i) The spares like cloth, oil cleaning solution, oil, cotter pin, nuts & bolts, connecting rods & hooks etc, if found defective/damage shall be replaced and make the ceiling fans fully functional and quoted rate shall deemed to be included for this provision and No extra payments will be done on this account.

Taking down exhaust fan & wall mounting fan (any size) for repair/rewinding, cleaning its dust & oil properly, oiling and fixing the same back to its original position after completing the wiring including connecting the wire from ceiling rose to exhaust fan/wall fan etc complete all as specified and as directed . Note :- (i) The spares like cloth, oil cleaning solution, oil, cotter pin, nuts & bolts, connecting rods & hooks etc, if found defective/damage shall be replaced and make the ceiling fans fully functional and quoted rate shall deemed to be included for this provision and No extra payments will be done on this account.

M&L for Rewinding the stator complete with super enamelled bare copper conductor with the existing size and number of turns , insulating, varnishing and pre heating for the following :- Note: Rates are deemed to be inclusive of replacing bush, bearing, armature & capacitor of any type, size & capacity, if required as per fan condition.

Ceiling fan 1200mm/1400mm sweep

Exhaust fan 200mm to 300 mm sweep

Exhaust fan above 300mm to 450mm sweep

Supply and fixing in replacement capacitor of 3.15 MFD complete all as specifeid and directed.

Supply and fixing in replacement capacitor of 2.5 MFD complete all as specifeid and directed.

Supply and fixing MS louvers of Exhaust fan of size 250mm upto 450mm sweep and removing the old, damaged and corroded exhaust fan louvers with new one, complete all as specified and directed.

Supply and fixing in replacement steel blades of Exhaust fan of size 250mm to 450mm sweep as per site complete all as specified and directed.

Supply and fixing in replacement Exhaust fan MS support arms, nut bots & washer for exhaust fan of size upto 450mm sweep of any type & size as per site complete all as specified and directed.

M&L for Painting of ceiling fans & exhaust fan (any size & sweep) complete, in situ with one coat of synthetic enamel paint by spraying machine including filling cavities with filler, after cleaning all dust etc of approved colour and writing MES number on the fan of in suitable size with synthetic enamal paint with brush painting complete all as specified and directed.

Supply and fixing in replacement heating element 1.5 KW capacity 230 volt suitable for geysers any type (triangular) as per site requirement complete all as specified and directed. Make: Venus/Theeta//Bajaj or equivalent. Note :- Sample shall be checked at site before procurement to match the existing models.

Supply and fixing in replacement thermostat 7"/11" suitable for storage type water heater complete all as specified and as directed. Note :- Sample shall be checked at site before procurement to match the existing models.

Supply and fixing in replacement PVC insulated , FRLS, PVC sheathed 3 core 4.00 sqmm copper conductor flexible sheathed cable suitable for geysers of any capacity complete all as specified and as directed.

M&L for preparing external surfaces of water heater, cleaning with emery paper & cloth and painting with two coat of synthetic enamel paint of white colour of approved make with brush and writing MES No. on it of suitable size complete all as specified and as directed.

Supply and fixing in replacement Bottom inspection chamber cover suitable for 25 Ltrs capacity geyser of any make/model complete all as specified and as directed.

Supply and fixing in replacement Indication lamp (red & green) suitable for geyser in round/rectangular shape complete all as specified and as directed.

Supply and fixing in replacement PVC connections 15mm size with PTMT nuts of length 450mm suitable for hot water complete all as specified and directed .

Supply and fixing in replacement 1100 Volts grade heavy duty cable PVC insulated aluminium stranded conductor served with inner sheathing of PVC tape and overall PVC sheathed in service connection suspended by insulating hangers not more than 1 meter apart including 4mm dia suspension wire twin core cable flat or circular of size 6 Sqmm complete all as specified and as directed.

Supply and fixing in replacement 1100 Volts grade heavy duty cable PVC insulated aluminium stranded conductor served with inner sheathing of PVC tape and overall PVC sheathed in service connection suspended by insulating hangers not more than 1 meter apart including 4mm suspension wire twin core cable flat or circular of size 10 Sqmm complete all as specified and as directed.

Supply and fixing in replacement LED Lamp/bulb 9 Watt, bipin with all accessories complete all as specified and as directed.

Net Contract Sum will be after deducting Sch Of Credit of Rs. 30494.00

GULATI BUILDERS

m/s jupiter builders