ADDN ALTN AND SPECIAL REPAIRS TO BLDG NO P 81 ADMIN BLOCK OF INHS NIVARINI AT INS CHILKA UNDER GE CHILKA

Amount

Dismantling of floor, health or wall tiling including cement mortar bedding (but not backing) removing rubbish off the premises complete all as specified and as directed.

M&L for vitrified ceramic tiles 9 to10 mm thick (square / rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match (light shade) in and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.

M&L for glazed ceramic coloured tiles in vertical surface 375mm x 250mm or 300mmx450mm x 6 to 7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and as directed.

Taking down chowkats or frames not exceeding 1.5 Sqm each but with shutters (without taking off shutters from the frames) complete all as specified and as directed.

Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4.0 sqm each but with shutters (without taking off shutters from the frames) complete all as specified and as directed.

Taking down shutters of any description, exceeding 1.0 sqm but not exceeding 2 sqm each, from chowkhats, complete all as specified and as directed.

S&F 40 mm thick flush shutters, solid core construction,with block board core& plywood face panels, commercial type on both sides and both faces are covered with decorative face with lipping/ frame to match complete all as specified and as directed.

S&F 100 mm size butt hinges , extruded aluminium alloy with galvanised mild steel hinge pin,anodised type B-21 complete all as specified and as directed.

S&F 150 mm size brass handles , cast type, polished bright complete all as specified and as directed.

S&F 150 mm long brass barrel tower bolts with cast or sheet barrel and rolled or cast bolts complete all as specified and as directed.

S&F 4 levers brass mortice lock, vertical type, size 100 mm complete all as specified and as directed.

S&F aluminium (die cast) body door closer, hydraulically regulated, designation No 3, universal type suitable for door shutters of 851 to 1000 mm in width of weight between 61 to 80 Kg and fixed complete all as specified and as directed.

S&F 140 mm floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor complete all as specified and as directed

S&F powder coated (minimum thickness of powder coating 50 micron) anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and as directed.

S&F powder coated of any colour (thickness of powder coating not less than 50 micron) anodised aluminium door shutters of side hung type with aluminium sections weighing 1.00 Kg/m including necessary joining cleats, glazing clips, rubber paking, anodised aluminium snap beading, neoprene packing, screws,anodised aluminium fittings such as handles 2 Nos and 4 Nos hinges in each shutter, tower bolt 150mm long 2 Nos etc complete all as specified and as directed.

S&F powder coated of any colour (thickness of powder coating not less than 50 micron) anodised aluminium sliding window/ventilator and cup board shutters without sash bar, aluminium sections weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber paking, anodised aluminium snap beading, screws,rollers, locking arrangements and aluminium anodised fittings including all accesories complete all as specified and as directed. Note :- Glass or wire cloth shall be measured and paid seperately under respective item as considered therein

Supply only 5.5 mm thick sheet glass ordinary quality in squares exceeding 0.5 sqm each pane for fixing to aluminium or wooden joinery complete all as specified and directed.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples to aluminium windows complete all as specified and as directed.

S&F for anodised powder coated of any colour (thickness of powder coated not less than 50 micron) aluminium grill of make "Deco grill" and DG-202 model with aperature size 50mmx50mm fixed with suitable channel complete all as specified as directed.

M&L 9 mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination fixed with screws in timber frame work complete all as specified and as directed.

M&L for 18 to 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms circular area and like including 15 mm thick screed bed or bedding layer in cement mortar 1:4, including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite including moulding of corners as required complete all as specified and as directed.

S&F solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam PVC Sheet & edges will be painted to match with prelam sheet reinforced with M.S Square tube, in opening as per specification and drawing complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & both side Prelam PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of both side Prelam PVC sheet to be fitted in the M.S frame welded/ sealed to the Stile & rails feathered at edges with suitable PVC sheet beading, & joined together with solvent cement, in the frame at site as per specification and drawing complete all as specified and as directed.

S&F 250 mm long, aluminium alloy,anodized, sliding door bolt with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and as directed.

S&F 150 mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed.

S&F 100 mm long butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed.

S&F 100 mm long extruded aluminium alloy handles, cast type anodised complete all as specified and as directed.

Demolition of brick or stone masonary work built in cement mortar including all quoins ,arches,pillars etc complete all as specified and as directed.

M&L for brick work with fly ash bricks, straight or curved on plain exceeding 6m mean radius built in cement mortar 1:6 complete all as specified and as directed.

Taking down cement plaster on brick or stone wall or on concrete surfaces including racking out joints, hacking for key, scrubbing down with water complete all as specified and as directed.

M&L 10 mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:6, surface finished even and fair complete all as specified and as directed.

M&L 15 mm thick rendering on brick work or concrete surfaces or stone masonary surface in cement mortar 1:4, mixed with WPC @ 3% by weight of cement , surface finished even and smooth complete all as specified and as directed. Note:-Water proofing compound shall be measured and paid separately.

Supply only water proofing compound complete all as specified and directed.

M&L for applying two coats fo oil bound distemper of approved shade over and including 1 mm thick wall care putty includign preparation of newly plastered surfaces of wall complete all as specified and as directed.

M&L for applying two coats of weather coat anti dust emulsion paint exterior grade of approved shade over a coat of alkali guard anti efflorescence primer including preperation of external plastered surfaces of walls of any description over 10 cm width or girth etc on column or pillars, RCC chajja and facia complete all as specified and as directed.

S&F GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27 mm fixed to sorrounding wall using nylon sleeves and screws at 450mm center to center/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm center to center with GI cleat and steel expansion fasteners with including ceiling section(n.exc 1.2m length)of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to intermediate channel at 457mm center to center of grid size 605mm x 605 mm complete all as specified and as directed.

M&L for 12mm thick gypsum board in ceiling fixed with screws as per manufacutrer's instructions complete all as specified and directed

M&L for applying applying two coats of oil bound distemper of approved shade over and including 1mm thick wall care putty on ceiling including preparation of surfaces complete all as specified and directed

M&L for applying one coat of oil bound distemper of approved shade including preparation of old decorated plastered surfaces of wall complete all as specified and as directed.

M&L for applying one coat of white wash on walls including preparation of old decorated surfaces of wall complete all as specified and as directed.

M&L for applying one coat of oil bound distemper of approved shade including preparation of old decorated plastered surfaces of ceiling complete all as specified and as directed.

Taking down carefully copper/ aluminium point wiring for light, fan, socket or power point complete with fittings such as switches, fan regulators, light fittings, ceilling rose, holders etc and including making good the disturbed surface on walls, floor etc complete all as specified and as directed.

M&L for point wiring with PVC FRLS insulated unsheathed multi stranded copper conductor cable of size 1.5 sqmm drawn through in including concealed PVC conduit not less than 20mm dia with pressed steel in concealed mild steel box duly covered with modular sheet for mounting switches/sockets complete with all accessories including 1.5 sqmm copper conductor FRLS cable for earth continuity conductor of green colour for one light point, fan/ exhaust fan point, one 5/6 Amp socket outlet controlled by one 5/6 Amps one way switch, complete all as specified and as directed. Note:- The unit rate is inclusive of cutting chasing and making good to match with the existing surface.

All as per item No. 43 above but with 2.5 sqmm copper cable of PVC insulated FRLS, unsheathed, multi stranded and 2.5 sqmm copper conductor cable FRLS as earth continuity conductor for power socket 15/16Amp on independent board complete all as specified and as directed.

Taking down carefully sub main wiring including batten or conduit by unscrewing from wall ceiling and making good the disturbed surface to match with the existing complete all as specified and as directed.

M&L sub main wiring with 2 runs of 4 sqmm PVC FRLS insulated unsheathed copper cable multistand 1100 V grade and one run of PVC FRLS insulated unsheathed 4 sqmm coppper conductor cable as earth continuity conductor drawn in concealed PVC conduit not less than 25mm dia including necessary cutting chasing and making good to match with the existing complete all as specified and as directed. Note:-: 2 runs of 4 Sqmm, 1 run of 4 Sqmm and 1 run of PVC conduit shalll be measured as one unit length.

S&F modular switch, one way, 6 Amp,1 module complete all as specified and as directed.

S&F modular socket,6 -2/3 pin combined 2 module complete all as specified and as directed.

S&F modular socket 6 / 16 Amp-2/3 pin , 2 module complete all as specified and as directed.

S&F sheet metal enclosure SPN with two pin and earth plug and socket complete with one single pole MCB 20 Amp capacity complete all as specified and as directed. Make:- C&S Electric Ltd/Standard/Havells.

S&F ceiling rose, surface bakelite 65 x 30mm, three terminals including PVC box of size 3"x3" round type complete all as specified and as directed.

S&F wall mounted fan AC single phase 230 volt of 400 mm sweep complete all as specified and as directed. Make:-Havells/Bajaj/Usha/Crompton Greaves

S&F in replacement 1x 28/30 Watt indoor type recess mounted LED luminaries with high brightness including connecting up with twisted flexible copper conductor cable of suitable size upto ceiling rose complete all as specified and as directed. Make:-Havells/Bajaj/Usha/Wipro

M/S S R Saha And Co

ABHIMANYU MAHARANA

VAIKUNTHA PARIDA