Construction of balance work of office of AEE PWD Mechanical Ramban at Maitra by way of providing Aluminium partition ,Pucca Drain and Steel gate.

Amount

Earth work in eXcavation by manual means in trenches of foundations, drains pipes, cables etc. ( not eXceeding 1.5m in width) and for shafts , wells ,cesspits and the like not exceeding 10 sqm on plan , depth upto 1.5 m including disposal of the excavated earth upto 1m from cutting edge, disposed earth to be levelled and neatly dressed in 75 % all kinds of soils and 25 % Ordinary Rock.

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering .All work up to plinth level . 1:5:10 ( 1 cement :5 fine sand :10 graded stone aggregate 40 mm nominal size ) Nallah including all carriages complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering all work up to plinth level 1:3:6 with 20% boulders. ( 1 cement :3coarse sand :6 graded stone aggregate 20 mm nominal size) crushed. including all carriages complete.

Provinding and laying in position, specified grade of Reinforced Cement Concrete. excluding the cost of centering, shuttering, finishing and reiforcement. All work up to plinth level in 1:1.5:3 (1 cement:1.5 coarse sand :3 graded stone agg. 20 mm nominal ) Crushed including all carriages complete.

Reinforcement for RCC work including straightening,cutting bending, placing in position and binding all complete upto plinth level Thermo Mechanical Treated bars.

Centring and shuttering including strutting propping etc. and removal of form for Columns, Pillars, piers, abutments, posts and struts

Providing and fixing Aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides withrequired EPDM rubber / neoprene gasket felt etc. Aluminum sectionsshall be smooth, rust free, straight, mitred and jointed mechanicallywherever required including cleat angle,Aluminum snap beading forglazing / panelling, C.P. brass / stainless steel screws, all complete as perarchitectural drawings and the directions of Engineer-in-Charge Powder coated aluminum (minimum thickness of powder coated 50 microns ) including glazing , panelling and dash fasteners complete item

Centring and shuttering including strutting propping etc. and removal of form for Columns, Pillars, piers, abutments, posts and struts

Cement concrete flooring 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone agg. ) finished with a floating coat of neat cement including cement slurry,but excluding the cost nosing of steps etc complete.50mm thick with 20 mm nominal size stone agg. Crushed

Providing cement plaster 12 mm thick cement of mix 1:6 ( 1 cement :6 fine sand )

Steel work welded in built up sections/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required In gratings,frames, guard bar, ladders railings brackets, gates and similar works

SHRI MUTAHIR AHMED MIR

SAHIL SHARMA

mubashir bashir