SPECIAL REPAIR FOR NCC OFFRS MESS SINGLE LIVING BLDG NO T-19 AT SI LINES MILITARY STATION, BHOPAL

Amount

Taking down chowkhats or frames exc 1.50 Sqm but n.exc 4.00 Sqm with shutters (without taking off shutters from the frame)

Taking down chowkhats or frames n exc 1.50 Sqm with shutters (without taking off shutters from the frame)

Taking down shutters of any description n exc 1.00 Sqm each and removing to or from store.

Taking down shutters of any description exc 1.00 Sqm but n exc 2.00 Sqm each and removing to or from store

Taking down shutters of any description exc 2.00 Sqm each and removing to or from store

Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store.

Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store.

M&L for Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sun shades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth.

S&F Tubes 15mm dia, `Medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors

Supplying and laying of 16 mm dia CPVC pipes SDR 11 and plain CPVC SDR 11 fittings in trenches complete all as specified

S&F Tubes 20 mm dia, `Medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors

Demolition of brick work or stone masonary built in cement mortar.

M&L for Brick work with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 using modular bricks all as specified and directed.

M&L for Excavation in trenches n exc 1.5 m wide and n exc 1.5 m in depth beyond ; for foundation, etc. or for shafts, wells , cesspits, manholes, pier holes etc n exc 10 sqm on plan and not 1.5 m depth and getting out in soft/ loose soil complete as directed by Engr in charge.

Returning, filling in trenches with excavated soil including spreading, levelling watering and well ramming in layers not exc. 25 cm thick.

Removing excavated material from site n exc 50 m and depositing where directed at a level n exc 1.5 m above the starting point.

M&L for brick work with sub class modular 'B' bricks in CM 1:6 using modular bricks straight or curved on plan to any radius.

M&L for Cutting into existing manholes for connecting new drains, 150/ 200 mm bore, making good to pipe and rendering, cutting out existing benching for and forming branch channel (½ round or ¾ section) in cement concrete 1:2:4 type B1 smooth finished, and reforming benching as required complete all as specified and directed.

Demolition of concrete in ground floors and pavings (un-reinforced) nexc 15 cm thickness (below or above ground level).

M&L for PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in foundations, filling and mass concrete.

M&L for PCC 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) as in Surface channel and drain.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

M&L for 25mm thick cement concrete type B-1 1:2:4 (Using 20 mm graded crushed stone aggregate) as in sub base.

M&L for rendering 10mm thick on fair faces of brick work or concrete surface in CM 1:4 as a back coat

Dismantling of Stone slabs and tiles of any description or thickness in floors , aprons etc. and removing rubbish off the premises complete.

M&L for Screed bed or bedding layer of mortar 20mm thick for laying floor finish in CM 1:6

M&L for Endura joint free colour tiles 8 to 10 mm thick (square/ rectangular) area of each tiles not exceeding 0.11 sqm , in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles. Make: Somany/ Johnson endura/ Kajaria

Ditto all as per item No 27 above but on vertical surface.

M&L for vitrified tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding, n exc 0.36 Sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles. Make: Somany/ Johnson/ Kajaria

Ditto all as per item No 29 above but on vertical surface 10mm thick back coat with cement mortar 1:4

M&L for Non skid Ceramic coloured tiles 7-8 mm thick (square / rectangular) area of each tile exc 0.11 sqm but not exc 0.18 sqm, in floor etc set and jointed in white or colour cement to match the shade of the tile complete all as specified and directed by Engr in charge. Make: Somany/ Johnson/ Kajaria

M&L for glazed ceramic coloured tiles in vertical surfaces 350x250x7mm /450x350x7mm thick set and jointed in cement slurry with joint free. Make: Somany/ Johnson/ Kajaria

S&F anodised aluminium snap grid frame work for false ceiling of 'Size of grid 605x605mm all as specified

M&L for 6 mm thick Non asbestos fibre cement building board fixed or laid/ inserted to timber/GI/Aluminium frame work with screws, fixed in ceiling, flat or sloping

M&L for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types

S&F powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat, channel etc for fixing etc. complete all as specified and directed. Note: Weight shall be verified by the GE.

Hacking out old broken glass (any thickness quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads

S&F 3mm thick plain sheet glass ordinary quality nexc 0.50 Sqm in each pane all as specified and directed.

S&F 4.8mm thick plain sheet glass ordinary quality nexc 0.50Sqm in each pane all as specified and directed.

S&F 2nd class HW plain, solid straight chowkhats & frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints.

S&F IInd class HW factory made 35 mm thick plain framed, panelled shutter (any number of panels) with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers fitted to chowkhats complete all as specified and directed by Engr in charge.

S&F Solid PVC Door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, as specified and directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top & bottom rails. MS frame shall be covered with heat moulded palin colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame wlded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, fixing tin the frame at site as specified and directed.

S&F in repair Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples

S&F 100mm size butt hinges medium weight cold rolled mild steel.

Ditto all as per item no 46.00 herein before- but 75mm long

S&F 100mm butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21

S&F 150 mm long aluminium handles, cast type, anodised fixed to shutters complete all as specified and directed by Engr in charge.

Ditto all as per item no 49.00 herein before but 100 mm long

S&F 150 mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed by Engr in charge.

Ditto all as per item no 51.00 herein before but 100 mm long

M&L for 35 mm Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); supplied and fitted to chowkhats

Ditto all as per item no 53.00 herein before but for 30 mm thick for glazed and gauzed window shutter all as specified and directed by Eng incharege.

S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed by engr in charge.

S&F in repair 20mm dia draphery rod decorative type incl brackets of approved quality as in complete, all as specified and directed

S&F 30mm wide of flap continuous (piano) hinges, brass , bright finish

M&L for 2nd Class hardwood, Plain fillets, square, rectangular or triangular in section, clean sawn, secured with mills or brads, not exceding 3 Sq.cm sectional area

M&L for prelaminated particle board 9 mm thick, exterior grade, prelaminated both side with decorative choice lamination fixed with nails to aluminium framed work fixed in repair.

M&L for prelaminated particle board 19 mm thick, exterior grade, prelaminated both side with decorative choice lamination fixed with nails to aluminium framed work fixed in repair.

S&F in repair prelaminated particle board 12 mm thick, exterior grade, prelaminated both side with decorative choice lamination fixed complete all as specified and directed.

M&L for two coat of varnishing to new surface of any description, nexc 10cm in width or girth.

S&F magnetic catches for cupboards with plastic body and striking plate not less than 40mm including letting in and fixed complete all as specified and directed

Dismantling of Asbestos cement (corrugated ted, semi corrugated, etc.) sheets in roof coverings

Dismantling timber fillets, rails, posts, rafters, purlins, etc. under 40 Sq cm in section in framed work.

Dismantling timber scantling 40 sq cm and over in section, in any position in unframed work.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/ slabs/ blankets, any thickness, including cover fillets

S&F MS rolled section/ tubular sections in purlin, cross, beam, rafter, posts etc. incl connected cleats, hold fasts etc of grade conforming to Fe 410-O or Fe 310-O all as specified and direcetd. Note: Weight shall be verified by the GE.

S&F MS wind ties for roof truss including necessary drilling bolting as riveting etc and similar work to FE 410-S or FE 310-S all as specified and direcetd.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self-tapping screws on angle iron frame of each side as directed by Engr-in-Charge.

Ditto all as per item No. 70 above but plain sheet.

M&L for preparation of old painted surfaces of steel and iron surface of any description and applying two coats of synthetic enamel paint complete as specified and directed.

M&L for preparation of new steel surface of any description and applying two coat of synthetic enamel paint over a coat of red oxide primer all as specified and directed

Taking down cement plaster on brick or stone walls/ ceiling etc including raking out joints, hacking for key, scrubbing down with water etc

M&L for 15mm thick rendering in CM 1:6 on fair faces of brick/ concrete surfaces finished even and smooth w/o using extra cement.

M&L for 15mm thick rendering in CM 1:4 on fair faces of brick/ concrete surfaces finished even and smooth w/o using extra cement.

S&F 400mm x 350mm mirror with PVC cabinet of standard including all fittings as accessories all as specified and directed. Make: Commander/ Prayag or equivalent as approved by the GE.

S&F in repairs Stainless steel sink, 1.00 mm thick for kitchen, with plug, washers and wastes/ coupling, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm with bowl size 410mmx 330mmx 160mm fixed complete all as specified and directed.

S&F CP Health faucet suitable for 15mm bore with connecting pieces including all necessary fittings and accessories as directed by Engr in Charge

S&F PVC connections 15mm size with PTMT nuts of length 450mm.complete as in repairs.

S&F in repairs Plastic water closet seat cover, any colour, closed pattern with flat bottom, and mild steel chromium plated for aluminised hinging device complete.

M&L for preparation of old plastered surfaces and applying two coats of oil emulsion distemper complete all as specified and directed by engr in charge.

M&L for preparation of newly plastered surfaces and applying two coats of oil emulsion distemper complete all as specified and directed by engr in charge.

S&F Aluminium Door closer hydraulically regulated all and specified and directed

M&L for preparation of newly plastered surface and applying two coats of cement base paint over one coat of primer all as specified and directed.

M&L for preparation of old plastered surface and applying two coats of cement base paint over one coat of primer all as specified and directed incluing necessary complete removal of existing treatment and preparation etc.

M&L for complete removal of old decorated surface of wall and applying two coats of exterior weather proof water base emulsion paint white/ coloured over and including one coat of white cement based putty (where it is required) complete all as specified and directed by Engr-in-Charge Note 1 :- Putty shall be measured and paid seperately & thickness of putty shall be as per manufacturer instructions. MAKE : Shalimar (shaktiman ) / Asian (Apex)/ Burger (wall mast) or equivalent as approved by GE. Note-2: Exterior Acrylic Emulsion Paint should be carried out by any of approved company / Firm (Apex of M/s Asian Paint or Equivalent)

M&L for wall care putty on wall/ ceiling as specified and directed. Note : Thickness of putty shall be as per manufacturer instructions.

S&F Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed

S&F in repair vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe)

S&F Chromium plated shower roses with or without shivel joints, any size, including fixing to steel pipe or union

S&F CP fancy type Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed

M&L for Vitreous China valveless, syphonic action type, flushing cistern low level, white, with inlet, ball valve, float and handle including brackets.

M&L for Towel rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/ plastic cleats (Minimum weight 190gms)

S&F Glass Corner, size nexc 250mm with CP bracket

M&L for Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long

M&L for Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/ plastic cleats (Minimum weight 90 gms)

M&L for Toilet paper holder, vitreous China, box type

S&F in repair Jet Spray with connecting pieces including all necessary fittings and accessories as directed by Engr in Charge

S&F PVC (SWR) pipes Double socketed,110mm in dia, in any length with rubber ring joints laid in trenches or in floors and wall

S&F PVC (SWR) pipes double socketed, 75mm in dia, in any length with rubber ring joints laid in trenches or in floors and wall

S&F PVC (SWR) bends any radius with oval access door 110mm dia

S&F PVC (SWR) bends any radius with oval acess door 75mm dia

S&F PVC (SWR), junction single, (Single T) equal or unequal 75 mm dia

S&F PVC (SWR), junction single, (Single T) equal or unequal110 mm dia

S&F PVC (SWR) vent cowl 110 mm dia

S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0. Note: Weight shall be verified by the GE.

S&F Hydraulic floor spring for aluminium doors as approved quality, all as specified and directed, including necessary taking down of existing steel/ aluminium shutter

M&L for Preparation new wooden surface of any description and applying two coats of synthetic enamel painting over a coat of pink primer all as specified and directed.

M&L for Preparation old wooden surface of any description and applying one coat of synthetic enamel painting all as specified and directed.

S&F in repair looking mirror of approved quality with wooden back and edge, complete polishing, complete all as specified and directed.

S&F Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed but fancy type 15 mm in dia in repairs

S&F Angle Cock, cast copper alloy screwed pressure, with crutch or butterfly handle, screwed both ends for iron pipe for unions and fixed but fancy type ,15 mm in dia

S&F Vitreous China wash basin, white, flat back, size 580x450mm (for Hospital use) excluding taps, waste chain and plug and porcelain stopper but including brackets.

S&F 15 mm wash basin mixutre, centre hole, mixing hot & cold water, fancy type, cast copper alloy, chromium plated with capstan head, chromium plated, screwed down high pressure, screwed for iron pipe etc and fixed in repairs complete all as specfied and directed by engr in charge. Make: Jaquar Cat No: 5001B or equivalent as approved by the GE.

Dismantling water tanks and removing to store.

S&F 1000 litre capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142 gms/ 20mm-210 gms/25mm-455gms/ 40mm- 690 gms)

S&F 15 mm bib cock two way with flange, cast copper alloy, fancy type, chromium plated screwed down for iron pipe and fixed in repairs complete all as specified and directed by engr in charge. Make: Jaquar Cat No: 5041 or equivalent as approved by the GE

S&F Banks, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; will ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe410-0 or Fe 310-0

Dismantling structural steel work including doors, gates but excluding framed truss etc.

M&L for PCC 1:3:6 type C2 (using 40mm graded crushed stone aggregate), 75mm thick in plinth protection laid in panels and finished even and smooth without using extra cement including necessary form work complete all as specified and directed.

M&L for mild steel bars 10 mm dia and over cut to length bent to shape as required including cranking bending spirally for hooping for columns hooking ends binding and including mild steel wire not less than 0.9 mm dia or securing with clips all as specified and directed.

M&L for TMT Bars 6 to 8 mm dia and over, cut to length and bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less 0.9 mm dia or securing with clips specified and directed.

M&L for form work to soffits of suspended slabs such as roof slabs, floor slabs landing and similar work not exceeding 200 mm thick as specified and directed

M&L for form work to sides of concrete foundations footings bases of columns raft and raft beams sides and soffits if any of foundation and plinth beam and similar works all as as specified and directed.

M&L for Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide fair finished surfaces as specified and directed.

M&L for Reinforced Cement Concrete M-20 Type B1 (Using 20mm graded crushed stone aggregate) to Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete all as specified and directed.

Demolition of concrete in ground floors and pavings (Reinforced) n exc 15 cm thickness (below or above ground level).

Demolition of concrete in ground floors and pavings (Reinforced) exc 15 cm thickness but above ground floors

M&L for machine pressed precast concrete inter locking paver block (Reflective type) in any shape and size confirming to IS-15658-2006 of 60 mm thickness M-35 grade with grey cement and pigment as specified and directed.

Taking down copper/ aluminium point wiring (light, fan, socket or power) complete, including fixture and fitting such as switches, ceilling roses, pendants, regulator, sockets, light fitting etc for taking credit and making good distrubed surfaces of walls, floors etc.

M&L for point wiring with 1.5 Sqmm multi standard copper conductor 1100 volts grade PVC insulated unsheathed cable drawn in and including in concealed PVC conduit not less than 20 mm dia, medium grade with fitting as approved with PVC insulated unsheathed copper wire green 1.5 Sqmm for continuous earth, sunk in cast iron / MS terminal box duly painted with aluminum inside and black bitumeneous paint all around out side over one coat of anti corrosive paint with 2.8 mm thick bakelite sheet, earth dolly for the following :- Note:- the rate inclusive of cutting, chasing of stone wall etc and making good to disturbed surface with matching paint/distemper in existing of any type of wall.

Ditto- but One light point /fan/ Exhaust fan/ bell point .

Ditto- but ditto but One 3 pin socket outlet 5 Amps on independent board

Ditto- but One 3 pin socket outlet on same board

Ditto- but 3 pin socket out let 15 Amps on independent board elect wiring 2.5 sqm and -ditto-

Ditto- but 3 pin socket out let 15 Amps on independent board elect wiring 4.0 sqmm and -ditto-

S&F switch piano type flush button type single pole one way 5 Amps ISI marked complete all as specified and directed.

S&F socket outlet 2 in 1, 5 pin flush 5 Amps complete all as specified and directed .

S&F switch socket combination 6 pin flush 15 Amp multi complete all as specified and directed .

S&F bell push flush type SP 5 Amp complete all as specified and directed .

S&F ceiling rose surface bakelite 65mm dia three terminal complete all as specified and directed .

S&F ding dong bell electric single phase suitable for 240 V complete all as specified and directed .

Taking down carefully existing ceiling fan any type any make, incl servicing and painting of ceiling fan with white enameled paint and refixing after celaning and painting and connection with flexible copper wire upto ceiling rose and checking of nuts bolt washers & safety pin etc complete all as specified and directed.

S&F MCB SPN DB made out of Sheet steel enclosure for flush/ surface mounting with bus bar, Earth Stud, neutral link, SPN 240 volts 200 Amps rated bus bar,12 way double door openable complete all as specified and directed.

S&F 63 Amp MCB SPN 240 V 10 KA, C curve complete all as specified and directed .

S&F MCB single pole 6 to 32 Amps complete all as specified and directed.

Taking down and disconnecting unserviceable MCB DB from electric system any rating along with wooden board and making good to disturbed surface to match with existing complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground earth pit not less than 2.25 mtr below normal GL with the top edge of the plate not less then 1.5 mtr below the normal GL connected to GI wire 4mm dia by means of bolts, nuts, check nuts and washer of galvanised iron or steel and protected by 15mm GI pipe (light grade) and watering pipe 20mm bore GI pipe (light grade) including GI wire meshed funnel and chamber PCC (1:4:8) type D2 using 40mm grade stone aggregate, coping shall be (1:3:6) type C 1 using 20mm stone aggregate with PCC 1:2:4 type B1 (using 20mm graded stone aggregate) pit cover re-inforced with 8mm dia at 80mm c/c both way, incl excavation in any type of soil and hard rock and removal of surplus soil of earth/rock complete all as shown in electrical plate of SSR Part I and as specified including charcoal dust, common salt complete and earth lead connected to earthing test point all as specified and testing of earthing on completion.

M&L for sub main wiring with PVC insulated unsheathed 2 x 6 sqmm stranded copper conductor cable 1100 volts grade heavy duty drawn into PVC rigid concealed conduit with 2.5 sqmm PVC insulated green copper cable for continuos earth PVC pipe not less than 20 mm dia with all accessories complete all as specified and directed.

Supply and fixing ceiling fan regulator Electronic step socket type, 240 Volts, complete all as specified and directed by EIC

Supply & fixing LED tube light complete fitting, surface mounted lumanaires, 1 x 18 W, 240V. Decorative ultra slim round/ square profile LED lighting fixture with extruded polycarbonate body, environmental friendly, energy efficient ready to use pack.with bipin holders, LED tube rod,connector block, etc. complete with all accessories internally pre-wired and including connecting up with flexible copper conductor cable with suitable size complete all as specified and directed by Engineer in charge . Make : Havells LHEXBTP7IN1W018 or equivalent make in C&G/ Bajaj/ Surya

Supply & fixing LED tube light complete fitting, surface mounted lumanaires, 1 x 10 W, 240V. Decorative ultra slim round /square profile LED lighting fixture with extruded polycarbonate body, environmental friendly, energy efficient ready to use pack.with bipin holders, LED tube rod,connector block, etc. complete with all accessories internally pre-wired and including connecting up with flexible copper conductor cable with suitable size complete all as specified and directed by Engineer in charge . Make: Havells LHEXBTP7IN1W009 or equivalant in C&G/ Bajaj/ Surya)

Supply & fixing LED Bed light fitting, 1 x 9 W, 240 V, luminaire with bipin holders, LED tube rod, connector block, etc. complete with all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable with suitable size complete.

Supply & fixing 2' x 2' LED recessed mounted environmental friendly , new generation , aesthetically designed, ultra modern recess mounting luminair with high brightness SMD LEDs as light source , 34 watts complete with all accessories internally pre-wired and including connecting up with copper conductor cable with suitable size complete all as specified and directed by Engineer in charge . Make: Havells PLUTONE02X2PLR34WLED840S or equivalent make in C&G/ Bajaj/ Surya)

S & F lamp holder PVC/ Polycarbonate type with back plate suitable for batten fitting.

Taking down existing geyser by disconnecting all water pipe line connection and refixing in same or different position including painting with white enamelled paint complete all as specified and directed.

Taking down carefully existing Exhaust fan any type any make, incl servicing and painting with black enameled paint and refixing after celaning and painting and connection with flexible copper wire upto ceiling rose and checking of nuts bolt washers etc complete all as specified and directed.

Taking down carefully existing electric/ Electronic meter and reconneted with service wire including fixing on new wooden board with copper wire of suitable size etc and making good to disturbed surface complete all as directed on site.

S&F LED bulb retrofit type of 9/ 10W complete.

Supply and fix sheet metal enclosures with socket plug top and MCB's with two pin and earth plug and socket complete with one Single pole MCB 240 V grade 25 Amp complete all as specified and directed .

S&F Water heater storage type (geyser), electric, of 25 Ltr capacity complete.

S&F Exhaust fan 230 mm sweep metal body with louvre 240V complete with all accessories with Heritage look including making hole in stone/brick wall grouting suitable size MI nuts/bolts & making good in all respects complete all as specified and directed by Engineer in charge . Make: Havells Ventilair DB- NEO or equivalent make in C&G/ Bajaj/ Usha)

Note for all items: All items shall be executed as specified and directed by Engr-in-charge.

MS Soumya consultants and designers

Nakoda Constrcution Company