GE(S)/M-52/2023-24

Amount

Taking down cement plaster from brick/stone walls / concrete surfaces including raking out joints, hacking for key , scrubbing down with water etc complete all as specified and directed

M&L for 15mm thick rendering on faces of brick work or concrete surfaces of walls in cement mortar 1:6, finished even and smooth without using extra cement including necessary scaffolding complete all as specified and directed.

M&L for 10mm thick rendering on faces of brick work or concrete surfaces of walls in cement mortar 1:6, finished even and smooth without using extra cement including necessary scaffolding complete all as specified and directed.

M&L for 10mm thick rendering or plastering work in CM 1:3 on fascia or edging of chajjas, ceiling and roof projections etc including taking down old plaster where required and necessary scaffolding complete all as specified and directed.

M&L for preparation of newly plastered surface of wall and making the surfaces smooth and applying two coats of cement base paint, over a coat of alkali resistant primer complete all as specified and directed.

M&L for preparation of newly plastered surface of wall and making the surfaces smooth and applying two coats of oil emulsion distemper, over a coat of primer complete all as specified and directed.

Disconnecting existing tanks, upto 500 ltrs capacity and setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately) Complete all as specified and directed.

S&F Rotational moulded polyethelyne water storage tank three layered (cylindrical vertical with closed top hoisted fixed in position all as specified in SSR part-I, capacity of tank 500 ltr incl inlet and outlet connection GI pipes medium grade respectively 20mm GI pipe medium grade over flow pipe 15cm long and PVC valve 20mm high pressure with polyethelyne float and fly nuts including dismantling water tanks (capacity of tank exc. 250 ltr but n. exc. 500 ltr) and removing from site complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connections complete all as specified and directed.

Taking up or down 20mm bore steel tubing and connections complete all as specified and directed.

M&L in replacement for 15mm bore water tubes 'medium grade' galvanised with all fitting and fixed complete to walls and ceilings or laid in floors, complete all as specified and directed.

M&L in replacement for 20mm bore water tubes 'medium grade' galvanised with all fitting and fixed complete to walls and ceilings or laid in floors, complete all as specified and directed.

Cutting holes into or through brick walls built, in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required depth n.exc 30 cm and n.exc 150 sq cm in area complete all as specified & directed.

S&F in repair stop valve cast copper alloy (ISI marked) srewed down high pressure with crutch and butterfly handle screwed both ends for iron pipe 15mm bore dia, in repairs complete all as specified & directed.

S&F "as in repair" 15mm bore stop/angle valve, with flange cast copper alloy (ISI Marked), chromium plated screwed down, high pressure with capstan head, screwed both ends, complete all as specified and directed.

S&F "as in repair" Bib taps for 15mm bore pipe, cast copper alloy fixed in repairs complete all as specified and directed.

S&F "as in repair" 15mm bore bib tap with flange, fancy type, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed.

S&F in repair 20mm brass Ball valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

M&L for 40mm thick brick tiles laid on roof top & joints grouted in flush in cement mortar (1:3) on roof incl dismantling of existing treatment and cleaning the surface complete all as specified and directed.

All as per item No 19 but except tiles complete all as specified and directed.

M&L for 20mm thick bedding layer of CM 1:4 mixed with liquid WPC @ 200ml/bag of cement finished even and smooth without using extra cement after cleaning & washing the surface of old roof complete all as specified & directed.

Demolition of cement concrete roof padding in any position including roof treatment of any type /description complete including removal of debries out side defence land complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) as in roof padding to repair damaged portion of slab and maintain required slope complete all as specified and directed.

M&L for provision of APP modified roof treatment over existing non-accessible RCC roof slab / chajjas / canopy / parapet wall, (To be executed through approved applicator of the membrane manufactured) with following specifications, complete all as specified and directed :- (a) Cleaning & washing the top surface of RCC roofing properly with water. (b) Applying oil bound bitumen primer @ 0.30 Litre / Sqm, manufactured by the same agency as that of APP with a density 0.87-0.89 KG / Litre at 25 degree centigrade on prepared surface. (c) Laying of membrane not less than 3.0mm thick APP modified water proofing membrane weighing not less than 3.60 KG/Sqm reinforced with non woven polyster fiber weight not less than 160 Gms/Sqm using butane torch by torch application with 10cm overlap and 15cm end lap. (d) Top of membrane shall be provided with solar reflective bituminous aluminum paint @ 0.10 KG / Sqm as prescribed by manufacturer of membrane. (e) APP Membrane shall be stick inside parapet where available by chase cutting and sealed with PCC 1:2:4, type B-0. (f) Top of membrane shall be provided with solar reflective bituminous aluminium paint @ 0.1 Kg/Sqm as prescribed by manufacture of membrane.

Supply only liquid water proofing compound of approved make complete all as specified and directed.

Demolition of cement concrete of any description and in any position not specifically provided for, complete all as specified and directed.

M&L for Brick work with fly ash bricks, old size bricks, straight or curved on plan exc 6 mtr mean radius built in CM (1:6) including demolition of existing old brick work in any position complete all as specified and directed.

M&L for formwork to chajjas, landings, balcony railing and similar work; (Horizontal or sloping) complete all as specified and directed.

M&L for precast cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregates) as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces, set in CM 1:6, complete all as specified and directed.

M&L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

M&L for 75mm thick cement concrete 1:3:6, type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection and paving, laid in slope, finished even and fair including making joints at every 2.5 mtr and at corner filled with bitumen 85/25 and sand in ratio 1:2 by weight including demolition of existing floor complete all as specified and directed.

M&L for 75mm thick cement concrete 1:4:8, type D-2 (using 40mm graded crushed stone aggregate) as in sub base, complete all as specified and directed.

M&L for 40mm thick cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in floor finishing in even and smooth without using extra cement, complete all as specified and directed.

Taking down chowkhats or frames with shutter not exc 1.5 Sqm each (without taking off shutters from the frame), complete all as specified and directed.

Taking down shutters of any description exc 1.0 Sqm but not exc 2.0 Sqm each, complete all as specified and directed.

S&F pressed steel frame made out of MS sheet 1.25mm thick of size 165mm x 60mm for doors / windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. including filling of concrete 1:3:6 type C-0 (12.5mm graded stone aggregate) as in back of chowkhats and including two coats of synthentic enamel paint over a coat of red oxide primer, complete all as specified and directed.

S&F pressed steel frame made out of MS sheet 1.25mm thick of size 105mm x 60mm for doors / windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. including filling of concrete 1:3:6 type C-0 (12.5mm graded stone aggregate) as in back of chowkhats and including two coats of synthentic enamel paint over a coat of red oxide primer, complete all as specified and directed.

Refixing of door shutters of any description exc 1.0 Sqm but not exc 2.0 Sqm each in same or other opening after resecuring or easing, complete all as specified and directed.

S&F factory made single extruded WPC (Wood Polymer Composit) solid door/windows/ceosetory windows & other frames/chowkhat of size 45 x 70mm comprising of vigin PVC polymer of K value 58-60 (suspension grade), calcium carbonate & natural fibres (wood powder/rice husk/ weat husk) and non additives (maximum toxicity index of 12 for 100gms) fabricated with mitre joints after applying PVC solvent cement and screwed with fully body threaded star headed SS screws having minimum frame density of 750kg/cum, screw withdrwal strenght of 2200N (face), 1100n (edge), minimum compressive strength 58 N/Sqmm , modulas of elasticity 900N/sqmm and resistence to spread of flame of Class A category with property of being termite /borer proof, water/moisture proof and fire retrdant and fixed position MS hold fast/lugs/SS dash fasteners of required dia and length (MS hold fasts/lugs or SS fasteners shall be paid separately) complete all as specified and directed Note :- i) WPC solid door / window frames minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable but no extra payment on this account shall be made.ii) Material manufactured by MES approved firms / ISI approved firms shall only be used in the work. IS certificate alongwith MTC to be produced before execution of work, in case ISI approved firm material is approved.

S&F factory made single extruded WPC (Wood Polymer Composit) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (suspension grade), calcium carbonate & natural fibres (wood powder/rice husk/ weat husk) and non additives (maximum toxicity index of 12 for 100gms) having minimum density of 650kg/cum, and screw withdrwal strenght of 1800N (face), 900n (edge), minimum compressive strength 50 N/Sqmm , modulas of elasticity 850N/sqmm and resistence to spread of flame of Class A category with property of being termite /borer proof, water/moisture proof and fire retrdant and fixing with stainless steel butt hinges of rerquired size with necessary full body threaded star headed counter sunk SS screws all as specified and directed . Note :- i) stainless steel butt hinges and necessary SS screws shall be paid separately). ii) Material manufactured by MES approved firms / ISI approved firms shall only be used in the work. IS certificate alongwith MTC to be produced before execution of work, in case ISI approved firm material is approved.

S&F factory made single extruded WPC (Wood Polymer Composit) solid decorative type flush door shutter of 35mm size comprising of virgin polymer of K value 58-60 (suspension grade), calcium carbonate & natural fibres (wood powder/rice husk/ weat husk) and non additives (maximum toxicity index of 12 for 100gms) having minimum density of 650kg/cum, and screw withdrwal strenght of 1800N (face), 900n (edge), minimum compressive strength 50 N/Sqmm , modulas of elasticity 850N/sqmm and resistence to spread of flame of Class A category with property of being termite /borer proof, water/moisture proof and fire retrdant and fixing with stainless steel butt hinges of rerquired size with necessary full body threaded star headed counter sunk SS screws all as specified and directed . Note :- i) stainless steel butt hinges and necessary SS screws shall be paid separately). ii) Material manufactured by MES approved firms / ISI approved firms shall only be used in the work. IS certificate alongwith MTC to be produced before execution of work, in case ISI approved firm material is approved.

S&F 150mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, (ISI marked), complete all as specified and directed.

S&F 100mm long butt hinges, type C-21, extruded aluminium alloy with galvanised mild steel hinge pin anodised complete all as specified and directed.

S&F 150mm long aluminium handle, cast type, anodised complete all as specified and directed.

S&F "as in repair" PVC low level flushing cistern, valveless, syphonic action type, 10 litres capacity with inlet ball valve and handle with and including brackets and PVC bend pipe 60/90cm long etc, complete all as specified and directed.

S&F "as in repair" Jet Spray (with 1.50 Mtr tube), fixed to EWC and angular stop cock/valve, complete all as specified and directed.

S&F "as in repair" PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed.

S&F "as in repair" plastic water closet seat over, back closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repair brass CP towel rail 20mm dia 'D' type 60 cm long between flanges complete all as specified and directed.

S&F in repair 15mm bore chromium plated brass central hole single lever WHB mixture, for mixing hot and cold water with 450mm long braided house 20 cartriage size, screwed down, high pressure, screwed for iron pipe, complete all as specified and directed.

S&F in repair 15mm bore chromium plated brass wall mixture, for mixing hot and cold water with 450mm long braided house 20 cartriage size, screwed down, high pressure, screwed for iron pipe, complete all as specified and directed.

S&F in repair LDPE waste pipe 32mm dia, suitable for WHB/sinks, including threaded PVC socket suitable for shank of waste coupling complete all as specified and directed.

S&F in repair 110mm bore PVC (SWR) pipes, single socketd, in any length with rubber ring joints, fixed to walls, complete all as specified and directed.

S&F in repair 110mm bore PVC (SWR) bend with oval accessed door, any radius, complete all as specified and directed.

S&F "as in repair" wall mounted 1x20 Watt LED tube light fittings (4 feet long), prewired, decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, enviornmental friendly, energy saving efficient ready to use pack 20 Watt LED 6500 K and making connection using 3 core, 0.50 sqmm PVC insulated and overall sheathed flexible copper conductor cable from ceiling rose/PVC connector to light fitting and testing etc, complete all as specified and directed.

S&F "as in repair" of 1x10 Watt LED light fittings mirror type with high out put diffuser (2 feet long), prewired, decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, enviornmental friendly, energy saving efficient ready to use pack 10 Watt LED 6500 K and making connection using 3 core, 0.50 sqmm PVC insulated and overall sheathed flexible copper conductor cable from ceiling rose/PVC connector to light fitting and testing etc, complete all as specified and directed.

S&F ''as in repair'' of LED light fitting 1x9 Watt/1x10 Watt bulk head luminaries including LED light driver holder including connection with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F ''as in repair'' decorative wall light white in colour made up of poly carbonate with and including 09 watt retro LED lamp complete all as specified and directed.

Note for srl item No 56 to 59 1. Driver shall be potted anti-vibration types. 2. LM-79 and LM-80 test report with 1 Lakh burning hours LED life from NABL lab shall be provided. 3. CRI (Colour Rendering Index) of fixture shall be > 70. 4. CCT (Colour Co-related Temperature of fixture shall be 5700K + 300 K. 5. System Lumen Efficacy shall be > 100 Lm/W. 6. 10 KV separate Surge Protection shall be provided as a part of fitting. 7. 2 years guarantee shall be provided by contractor supported by OEM covering all parts of luminaire. 8. Lenses shall be Modular Type. 9. PCB used shall be MC PCB type. 10. The defect liability period of LED light shall be 05 years from the certified date of completion & the contractor shall replace/repair the defective fitting within 07 days after handing over to contractor for replacement/repair. 11. CA No. shall be written on each fitting before installation. 12. The name of manufacturer to be embossed on the fitting. 13. The fittings shall have arrangement so that maintenance required, if any can be carried out from Top cover.

S&F ''as in repair'' CP waste coupling for sink size 32mm (Half or full threaded) complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise provided for complete all as specified and directed.

M/S HIMANSHU BUILDERS

WALIA ENTERPRISES

AV ENTERPRISES

M/S NARESH KUMAR SHARMA

Bidder Name

Walia trading co

WALIA ENTERPRISES

AV ENTERPRISES

M/S NARESH KUMAR SHARMA

M/S HIMANSHU BUILDERS