Repair of Primary health center at Dharampur,Tehsil Baddi District Solan

Amount

Demolishing cement concrete manually/ by mechanical means including disposal of material within all lead & lifts as per direction of Engineer-in-Charge nominal concrete 1 : 4 : 8 ( One cement : four sand : eight graded stone aggregate forty/twenty nominal size ) or leaner mix ( i/e equivalent design mix, including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge.

Demolishing Reinforced cement concrete work manually/ by mechanical means including stacking of steel bars & disposal of unserviceable materials within all lead & lifts as per direction of the Engineer-in-Charge, including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge.

Extra for cutting reinforcement bars manually/ by mechanical means in Reinforced cement concrete or Reinforced brick work ( Payment shall be made on the cross sectional area of Reinforced cement concrete or Reinforced brck work ) as per direction of the Engineer-in-Charge, including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge.

Demolishing brick work manually/ by mechanical means including stacking of serviceable materials & disposal of unserviceable materials within all lead & lifts as per direction of the Engineer-in-Charge in cement mortar, including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge.

Dismantling doors, windows & clerestory windowss ( steel or wood ) shutter including chowkets, architrave, holdfast etc. complete & stacking within all leads, lifts & upto all area in Square metres, including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge.

Providing and laying in position cement concrete of specified grade mechanically mixed and curing complete excluding the cost of centering and shuttering - All work up to plinth level and all floor level in 1:4:8 (one Cement : four coarse sand : eight graded stone aggregate 40mm (forty millimeter ) nominal size) including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.

Providing & laying cement concrete mechanically mixed in retaining walls, return walls, walls ( any thickness ) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain windows sills, fillets, sunken floor etc. upto floor five level, excluding the cost of centring , shuttering & finishing in cement concrete 1 : 5 : 10 ( One cement : five coarse sand : ten graded stone aggregate 40 mm ( forty milimetre ) nominal size )including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.

Providing and laying reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor all level mechanically mixed, vibrated and curing complete, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (one cement : one point five coarse sand : three graded stone aggregate 20mm ( twenty millimeter ) nominal size) including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.

Providing form work with steel plates 3.15mm ( three point fifteen millimeter ) thick welded with angle iron in frame 30X 30X5mm ( thirty X thirty X five millimeter ) so as to give a fair finish including centering ,shuttering, strutting and propping etc. with wooden battens and ballies , height of propping and centering below supporting floor to ceiling not exceeding 4.00 meters ( four meters ) and removal of the same for insitu- reinfoced concrete and plain concrete work including all leads and lifts of materials or as per the directions of Engineer in Charge.

Suspended floors, roofs, landings, balconies and access platform including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.

Lintels, beams, plinth beams, girders, bressumers and cantilevers including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.

Edges of slabs and breaks in floors and walls Under 20cm ( twenty centimeter ) wide including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.

In retainiing walls, return walls, wall ( any thickness ) including attached pilasters, buttresses, plinth & string courses fillets, kerbs & steps etc.including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.

Providing and placing steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto floor all level. Thermo-Mechanically Treated bars of grade Fe-500 D or more including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation & plinth in all shapes and sizes in Cement mortar 1 : 6 ( One cement : six coarse sand ) including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor all level in all shapes and sizes in Cement mortar 1 : 6 (one cement : six coarse sand ) including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in : Cement mortar 1 :4 ( One cement : four coarse sand ) including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.

Providing & fixing panelled or panelled & glazed shutters for doors, windows & clerestory windows fixing with hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of the Engineer-in-Charge,Kiln seasoned & Chemically treated Hollock wood, 35 mm thick shutters, including all leads, lifts, carriage of materials & to the entire satisfaction of the Engineer-in-Charge.

Providing & fixing 35 mm ( thirty five milimetre ) thick factory made laminated veneer Lumber door shutters conforming to IS : 14616 & TADS 15;2001 ( Part B ), fixing with butt hinges or required size with necessary screws, all complete as per direction of the Engineer-in-Charge & panelling with panels ( Butt hinges & necessary screws shall be paid separately ) 12 mm ( twelve milimetre ) thick plain grade-1, medium density flat pressed three layer particle board FPT-1 of graded wood particle board FPT-1, IS: 3087 marked, bonded with BWP type synthetic resin adhesive as per IS: 848, including all leads, lifts, carriage of materials & to the entire satisfaction of the Engineer-in-Charge.

Providing & fixing wire gauge shutters using galvanised mild steel gauge of average width of aperture 1.4 mm ( one point four milimetre ) in both directions with wire of dia 0.63 mm ( zero point six three milimetre ) for doors, windows & clerestory windows with hinges & necessary screws 35 mm ( thirty five milimetre ) thick shutters Kiln seasoned & chemically treated hallack wood including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.

Providing and fixing mild steel grills of required pattern in frames of windows etc. with mild steel flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.

Providing & fixing IS: 12817 marked stainless steel butt hinges with stainless steel screws etc. complete 125x64x1.90 mm ( One hundred twenty five into sixty four into one point nine milimetre ) for doors shutters, including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.

Providing & fixing IS: 12817 marked stainless steel butt hinges with stainless steel screws etc. complete 75x47x1.80 mm ( Seventy five into fourty seven into one point eight milimetre ) for doors shutters, including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.

Providing & fixing aluminium sliding door bolts, ISI marked anodised ( Anodic coating not less than grade AC 10 as per IS:1868 ), transparent or dyed colour to required colour or shade, with nuts & screws etc. complete 250 x 16 mm ( two hundred fifty into sixteen milimetre ) size including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.

Providing & fixing aluminium tower bolts ISI marked anodised ( anodic coating not less than grade AC 10 as per IS;1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete 250 x 10 mm ( two hundred fifty into ten milimetre ) size including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.

Providing & fixing aluminium tower bolts ISI marked anodised ( anodic coating not less than grade AC 10 as per IS;1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete 150 x 10 mm ( One hundred fifty into ten milimetre ) size including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.

Providing & fixing aluminium handles ISI marked anodised ( anodic coating not less than grade AC 10 as per IS;1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete 125 mm ( one hundred twentyfive milimetre ) size including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.

Providing & fixing aluminium handles ISI marked anodised ( anodic coating not less than grade AC 10 as per IS;1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete 75 mm ( Seventy five milimetre ) size including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.

Providing & fixing in position collapsible steel shutters with vertical channels 20x10x2mm ( twenty into ten into two milimetre ) & braced with flat iron diagonals 20x5 mm ( twenty five milimetre ) size with top & bottom rail of T-iron 40x40x6 mm ( forty into forty into six milimetre ), with 40 mm ( forty milimetre ) dia steel pulley, complete with bolts & nuts, locking arrangement, stoppers, handles including applying a priming coat of approved steel primer, including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.

Providing & fixing angle iron frames for doors, windows & ventilators of mild steel angle iron section of size 50x50x5mm ( fifty into fifty into five milimetre ) , joints mitred & welded by angle iron 50x50x5 ( fifty into fifty into five milimetre ) or 50 x 5 mm ( fifty into five milimetre ) flat pieces to the existing T-iron frame or to the wall dash fasterner, including fixing of necessary butt hinges & screws & applying a priming coat of approved steel primer, all complete as per the direction of the Engineer-in-Charge, including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.

Providing & laying Vitrified floor tiles in different sizes ( thicknes to be specified by the manufacturer ) with water absorption less than 0.08 % ( zero point eight percent ) & conforming to IS: 15622, of approved make, in all colour & shades, laid on 20 mm ( twenty milimeter ) thick cement mortar 1 : 4 ( One cement : four coarse sand ), jointing with grey cement slurry @ 3.3 ( at the rate three point three ) kilogram per square metre including grouting the joint with white cement & matching pigments etc. complete size of the tiles 600 x 600 mm ( Six hundred into Six hindred milimetre ),including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.

Providing & laying Vitrified tiles in different sizes ( thicknes to be specified by the manufacturer ) with water absorption less than 0.08 % ( zero point eight percent ) & conforming to IS: 15622, of approved make, in all colour & shades in skirting, riser of steps, over 20 mm ( twenty milimeter ) thick bed of cement mortar 1 : 3 ( One cement : three coarse sand ), jointing with grey cement slurry @ 3.3 ( at the rate three point three ) kilogram per square metre including grouting the joint with white cement & matching pigments etc. complete size of the tiles 600 x 600 mm ( Six hundred into Six hindred milimetre ),including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.

Providing & fixing Ist quality ceramic glazed floor tiles conforming to IS: 15622 ( thickness to be specified by the manufacturer ) of approved make in all colour & shade of any size as prroved by the Engineer-in-Charge in Skirting, risers of steps & dado over 12 mm ( twelve milimetre ) thick bed of cement mortar 1 : 3 ( One cement : three coarse sand ), jointing with grey cement slurry @ 3.3 ( at the rate three point three ) kilogram per square metre including pointing in white cement & matching pigments etc. complete size of the tiles 600 x 600 mm ( Six hundred into Six hindred milimetre ),including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.

6mm ( six millimeter ) cement plaster of mix 1:4 (one cement : four fine sand) complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.

15mm ( fifteen millimeter ) cement plaster on the rough side of single or half brick wall of mix : 1:4 (one cement: four fine sand) complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.

15mm ( fifteen millimeter ) cement plaster on the rough side of single or half brick wall of mix : 1:6 (one cement: six fine sand) complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.

Providing & applying plaster of paris putty of 2 mm ( two milimetre ) thickness over plastered surface to prepare the surface even & smooth complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.

Distempering with oil bound washable distemper of approved brand & manufacture to give an even shade new work ( two or more coats ) over and including water thinnable priming coat with cement primer, including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.

Finishing walls with Acrylic smooth exterior paint with of required shade new work ( two or more coat ) applied @ 1.67 litre/10 Sqmt ( one point six seven litre per ten square metres ) over & including priming coat of exterior primer applied @ 2.20 Kg /10 Sqmt ( at the rate two point two zero kilograme per ten square metre ) including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.

Applying priming coat with ready mixed pink or grey primer of approved brand & manufacture on wood work ( hard & soft wood ), including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10sqm ( zero point nine zero litre per ten square meter ) over an under coat of primer applied @0.75 ltr/10 sqm ( zero point seven five litre per ten square meter )of approved brand and manufacture complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10sqm( zero point nine zero litre per ten square meter ) over an under coat of primer applied @ 0.80 ltr/ 10sqm( zero point eight zero litre per ten square meter ) of approved brand and manufacture complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10litre ( ten litre )low level white PVC flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge:- W.C. pan with ISI marked white solid plastic seat and lid.

Providing and fixing white vitreous china flat back or wall corner type lipped front Urinal basin of size 430mm x 260mm x 350mm & 340x410x265 mm ( four hundred thirty millimeter into two hundred sixty millimeter into three hundred fifty millimeter or Three hundred forty into four hundred ten into two hundred sixty five milimetre ) sizes respectively with auotmatic flushing cistern with standard flush pipe & C.P. brass spreaders with brass unions & G.I. clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required complete, One urinal basin with 5 ( five ) litre white PVC automatic flushing cistern, including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.

Providing and fixing wash basin with C.I. brackets, 15mm ( fifteen millimeter ) C.P. brass pillar taps, 32mm ( thirty two millimeter ) C.P.brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge:- White Vitreous China wash basin size 630mm x 450mm ( Six hundred thirty millimeter X four hundred fifty millimeter ) with single 15mm ( fifteen millimeter ) C.P. Brass pillar tap .

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.

Providing & fixing stainless steel A ISI 304 ( 18/8 ) kitchen sink as per IS: 13983 with cast iron brackets and stainless steel plug 40 mm ( forty milimeter ) including painting of fittings & brackets, cutting & making good the walls wherever required kitchen sink with drain board 510 x 1040 mm ( five hundred ten into One thousand forty milimeter ) bowl depth 225 mm ( two hundred twenty five milimeter ), including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.

Providing & fixing white vitreous China Laboratory sink with cast iron brackets, C.P. brass chain with rubber plug, 40 mm ( forty milimetre ) C.P. brass waste & 40 mm ( forty milimetre ) C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings & brackets, cutting & making good the walls wherever required size 600 x 450 x 200 mm ( six hundred into forty hundred fifty into two hundred milimeter ),including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.

Providing & fixing 8mm ( eight milimetre ) dia C.P./S.S. jet with flexible tube upto 1.00 mtrs ( One metre ) long with S.S. triangular plate to Eureopean type W.C. of quality & make as approved by the Engineer-in-Charge,including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.

Providing & fixing Galvanised iron inlet connection for fulsh pipe connecting with water closet pan ,including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.

Providing & fixing PVC waste pipe for sink or wash basin including PVC waste fitting complete Flexible pipe 32 mm ( thirty two milimetre ) dia ,including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.

Providing & fixing 100mm ( one hundred milimetre ) sand cast iron grating for gully trap, including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.

Providing and fixing 600mm x 450mm ( Six hundred millimeter into four hundred fifty millimeter ) beveled edge mirror of superior glass (of approved quality) complete with 6mm ( six milimetre ) thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.

Providing and fixing C.P. brass toilet paper holder complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.

Providuing & fixing PTMT towel rail complete with brackets fixed to wooden cleats with C.P. brass screws with concealed fittings arrangement of approved quality & colour, 450 mm ( Four hundred fifty milimetre ) long towel rail with total length of 495 mm, 78 mm ( Four hundred ninety five milimeter, seventy eight milimetre ) wide & effective height of 88 mm ( eighty eight milimetre ) , weighting not less than 170 ( One hundred seventy ) grams including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.

Providing and fixing Polyethelene-AluminiumPolyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre ( one metre ) spacing. This includes testing of joints complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge:- 1216 (16 mm ( sixteen millimeter ) OD) pipe.

Providing and fixing Polyethelene-AluminiumPolyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre ( one metre ) spacing. This includes testing of joints complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge:-1620 (20mm ( twenty millimeter ) OD) pipe.

Providing and fixing G.I. pipes complete with G.I. fittings & Clamps including making good the walls etc. concealed pipe including painting with anti corrosive bitumastic paint, cutting & making good the walls including carriage of materials in all leads and lifts and as directed by the Engineer in Charge. internal work:-15mm ( fifteen millimeter ) dia nominal bore.

Providing and fixing G.I. pipes complete with G.I. fittings including making good the walls etc. concealed pipe including painting with anti corrosive bitumastic paint, cutting & making good the walls including carriage of materials in all leads and lifts and as directed by the Engineer in Charge. internal work :- 20mm ( twenty millimetre ) dia.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.

Providing and fixing C.P. brass bib cock of approved quality conforming to IS : 8931, complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge. 15mm( fifteen millimeter ) nominal bore .

Providing and fixing C.P. brass stop cock ( Concealed ) of standard design & of approved make conforming to IS : 8931, complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge. 15mm( fifteen millimeter ) nominal bore .

Providing and fixing C.P. brass angle valve for basin mixer & geyser point of approved quality conforming to IS : 8931, complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge. 15mm( fifteen millimeter ) nominal bore .

Constructing brick masonry manhole in cement mortar 1:4 ( one cement : four coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (one cement : one point five coarse sand (zone- III) : three graded stone aggregate 20mm ( twenty millimeter ) nominal size), foundation concrete 1:4:8 mix (one cement : four coarse sand (zone- III) : eight graded stone aggregate 40mm ( forty millimeter ) nominal size), inside plastering 12mm ( twelve millimeter ) thick with cement mortar 1:3 (one cement : three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (one cement : two coarse sand : four graded stone aggregate 20mm ( twenty millimeter ) nominal size) finished with a floating coat of neat cement complete as per standard design complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge. : Inside size 90cm x 80cm and 45cm ( Ninety centimeter into eighty centimeter and forty five centimeter ) deep including C.I. cover with frame (medium duty) 455 x 610 mm ( Four hundred fifty five into Six hundred ten millimeter ) internal dimensions, total weight of cover and frame to be not less than 38 kg ( thirty eight kilogram ) (weight of cover 23 kg ( twenty three kilogram ) and weight of frame 15 kg( fifteen kilogram ) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.50, including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.

Cutting holes upto 30x30cm ( thirty centimetre into thirty centimetre ) in walls including making good the same with common burnt clay F.P.S. ( Non modular ) bricks, including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.

Providing and fixing on wall face unplasticcised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10mm ( ten millimeter ) gap for thermal expansion, Single socketed pipes complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge:- 75 mm ( Seventy five millimeter ) diameter metre.

Providing and fixing on wall face unplasticcised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10mm ( ten millimeter ) gap for thermal expansion, Single socketed pipes complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge:- 100 mm ( One hundred millimeter ) diameter metre.

Providing and fixing on wall face unplasticised PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10mm ( ten millimeter ) gap for thermal expansion complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge:- Coupler 75 mm ( Seventy five millimeter ).

Providing and fixing on wall face unplasticised PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10mm ( ten millimeter ) gap for thermal expansion complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge:- Coupler 110 mm ( One hundred ten millimeter ).

Providing and fixing on wall face unplasticised PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10mm ( ten millimeter ) gap for thermal expansion complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge:- Single tees with door 75x75x75mm ( Seventy five into seventy five into seventy five milimetre )

Providing and fixing on wall face unplasticised PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10mm ( ten millimeter ) gap for thermal expansion complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge:- Single tees with door 110x110x110mm ( One hundred ten into one hundred ten into one hundred ten milimetre )

Providing and fixing on wall face unplasticised PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10mm ( ten millimeter ) gap for thermal expansion complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge:- Bend 87.5° 75 mm ( eighty seven point five degree Seventy five millimeter ) bend.

Providing and fixing on wall face unplasticised PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10mm ( ten millimeter ) gap for thermal expansion complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge:- Bend 87.5° 110 mm ( eighty seven point five degree One hundred ten millimeter ) bend.

Excavation work by mechanical means ( Hydraulic excavator ) / manual means in foundation trenches or drains ( Upto all width & depth ) including dressing of sides & ramming or bottom,upto all lifts, including getting out the excavated soil & disposal of surplus excavated soil as directed with all leads & lifts in all kind of soil, including carriage of materials in all leads and lifts and as directed by the Engineer-in-Charge.

Cement concrete flooring 1 : 2 : 4 ( One cement : two coarse sand : four graded stone aggregate ) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete 40 mm ( forty milimetre ) thick with 20mm ( twenty milimetre ) nominal size ) stone aggregate including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.

Supplying & filling in plinth with sand under floors including watering, ramming, consolidating & dressing complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.

Supplying & filling brick bats in dispension trenches ( Brick aggregate ( Single size ) 50 mm ( Fifty milimetre ) nominal size ) including carriage of materials in all leads and lifts and as directed by the Engineer in Charge

Providing & fixing in position precast reinforcement coment concrete cover & frame 300mm x 300 mm ( Three hundred milimetre into three hundred milimetre ) internal dimensions of gully trap complete as per HP.PWD., specification of 1990 Volume-I including carriage of materials in all leads and lifts and as directed by the Engineer in Charge

Providing & fixing in position precast reinforcement coment concrete manhole cover & frame of required shape rectangular shape 600 x 450 mm ( six hundred into four hundred fifty milimetre ) internal dimensions including carriage of materials in all leads and lifts and as directed by the Engineer in Charge

Providing & fixing PVC Cowl of 75 mm ( Seventy five milimetre ) dia, internal dimensions including carriage of materials in all leads and lifts and as directed by the Engineer in Charge

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position & applying a priming coat of approved steel primer using structural steel etc. as required in grating, frames, guard bars, ladders, railing, brackets, gates & similar work including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.

Providing and fixing on wall face unplasticcised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10mm ( ten millimeter ) gap for thermal expansion, Single socketed pipes complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge:- 110 mm ( One hundred ten millimeter ) diameter metre for weep hole.

SHIV PAL

NARESH KUMAR