Providing CC Road, Inspection chamber, removal of jungle clearanceand other works at Saraswathi Nagar UGSS Pumping Station in ward No 29

Amount

Earth work excavation for foundation in Hard stiff clay,stiff black cotton, hard red earth ,shales murram,gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand,silt or other loose soil,wets and,or silt not under water,light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hard rock requiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete 10cum( B.D PG NO 18)

Supplying and filling in foundation and basement with stone dust in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification.

Plain Cement Concrete 1:4:8(one cement four fine aggregate sand eight coarse aggregates) using 40mm size ISSHBG metal including cost and conveyance of all materials to site and including for the mixing,laying and labour charges and all incidential charges such as water providing etc.,complete as per standard specification ( B.D PG NO 21)

Supplying ,erecting STEEL CENTERING for sides and soffits inc supports and strutting for plain surface such an reinforced cement concrete slasp rectangualar beams tee or el beams lintels , bed blocks staircase in all floors of any height (the retrived materials should be taken back by the contractor) the payment for cenetering shall be given by the concrete is laid (For Plinth Beam) ( B.D PG NO 24)

Reinforced cement concrete 1:1 1/2 :3 (One cement one half sand and three aggregates) using 20mm machine crushed stone jelly for all RCC items of work including vibration charges curing etc.complete.( B.D PG NO 25)

Providing of Granular Sub base using 53-22.40mm (53mm metal, 46.50mm metal,45mm metal, 37.50mm metal,26.50mm metal, 25mm metal, 22.40mm metal) Grade I materials of table 400 -1 of Morth with minimum CBR 30 spreading in uniform layers with motor grader on prepared surface, mix in by palce method at OMC and compacting with Vibratory Roller to achieve the desired density including all labourcharges etc, complete as per technical specification and as directed by the departmental officers. Morth - IV No. 111,112,401,900.

Plain Cement Concrete 1:4:8 (one cement four fine aggregates and eight coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification

Plain Cement concrete 1:1.5:3 (one cement, One and Half sand, Three aggregate) using 20mm gauge hand broken granite stone jelly for foundation including dewatering if found necessary and laid in layers of not more than 15 cm thick and compacted,etc., complete complying with standard specfication

Providing and laying ,spreading and compacting graded stone aggregate to wet mix macadam (WMM ) soecification including premixing the material with water at OMC in mechanical mix plant carriage to mixed material by tipper to site laying in uniform layers with paver in sub base / base course on well prepared surface and compacting with vibratory roller to achive the desired density complete as per clasue 406 of MORTH specifications.

Supplying and laying Rubberised interlocking Paver block M40 grade Providing and laying of 63mm thick high strength type conforming IS 15658-2006 of rubberized interlocking paver lock in size of minimum compressive strength of 40N/mm2 in uniform shape of approved make to be laid in flurring bone pattern with sand cushion below the uniform shap of approved non skitting surface in the top and the rate including levelling the base preparation of pavers as sub base, sand cushion 150mm thick laying out of pavement cut the pieces to fix the edge vibring the pavers,sweeping tranporting loading unloading of laying paver block as per standard specification,.

Painting two coats for Interior surface with approved Interior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification.

Painting two coats for Exterior surface with approved Exterior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification.

Supplying and fixing in position Indian water closet of size 580 X 440mm ,white glazedear then ware of approved quality with' P'trapor'S 'trap confirming to IS:2556-Part XII with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (one part of lime ,two parts of sand and five parts of brick jelly) 100mm thick and finishing the top to required slope and including giving necessary connection to castiron soil pipes/PVC pipes by dismandling brick masonry, reinforced cement concrete roof /floor slab and making good the disturbed portion to original condition without leakageetc.,complete complying with standard specifications and as directed by the departmental officers. B.D pg no52.

Charges for developing the bore wells with Air Compressor 600cfm (Minimum 8 hours) including transportation labor and fuel charges for Compressor as directed by the Departmental Officer and conducting yield test by “V” notch method.

Removal of centrifugal pumpset/ jet pumps/ submersible pumpsets and its accessories from borewell/ open well for attending repairs 50% of the rates mentioned under item 17 (a), (b) and (c) may be allowed for the respective Horse power.

Re-erection of centrifugal pumpsets, jet pumpsets and its accessories into the borewell/ openwell after attending the repairs 50% of the rate mentioned under item 17 (a), (b) and (c) may be allowed for respective Horse power.

Supply, delivery and fixing of the following ISI make water supply materials including all labour charges etc., complete

2" U Pvc Pipe (Twad s.no3(6) pg no 24)

2" dia pvc pipe (Sor s no 394 pg no 99)

2" dia pvc bend

3/4" dia PVC Tee

3/4" dia GI Elbow

3/4" dia Pvc Tap

3/4" dia PVC Coupler

Supplying and fixing in position best quality P.V.C soil/ waste pipes (6KSC) of various sizes having ISI mark and providing leakproof joints including fixing to the wall with P.V.C/ M.S clamps etc., and making connection to all sanitary fittings, dismandling masonry/R.C.C. works wherever necessary and making good the dismandled portion to the original condition, complying with standard specifications.

Supplying and fixing in position P.V.C. specials such as plain bend, door bend, plain tee, door tee, offsets,Y-junction, plain or with door of various sizes best quality confirming to I.S.S and providing leakproof joints including fixing to wall and giving connection to the P.V.C, soil stacks, dismadling the brick masonry or R.C.C. floor or Roof slab and redoing the dismandled portion to original condition etc., complete complying with standard specifications.

110mm dia PVC. Door Elbow

110mm dia Vent Cowl

Supply and run off 4 to 6 Sq.mm polythene insulator and PVC sheathed (Heavy Duty) service meter Aluminium cable of 1100 V grade on bearer wire for servive connection mains (SD 61).(320 Aluminim Wire)(Twad Sor S no 12.0 pg.no 120)

Supply and Delivery of 4 Sqmm PVC insulated and Sheathed 3 Core flat type copper cable confirming to IS 694/1990 Including all charges with excise duty and handling charges etc (TWAD Sl.No.12.1 P.No.120)

Supply and fixing of single box type 4'40W fluorescent fitting complete with copper choke and condensor with conduit pipe suspension from the ceiling with PVC unsheathed copper leads from terminals to the fitting with tube

Supply and fixing of 1200mm (48") sweep AC ceiling fan complete with stepped electronic 300W regulator with 1 metre down rod with fan clamp with side plates and cross arm of size 450mm (18") etc, complete SD 106

SRUTHI ALUM INDUSTRY (BID ID -1197976)