SPECIAL REPAIR TO ROAD OF BHARATPUR LINE DHARAMSALA

Amount

Scarifying or picking gravelled, macadam or bituminous macadam surfaces, depth exceeding 50 mm but not exceeding 100 mm deep and area not exceeding 400 sqm and stacking the material for reuse all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15 cm thick above or below ground level complete and disposal of unserviceable material, debris and rubbish to a distance not exceeding 100m complete all as specified and directed.

Demolition of brick work or stonework built in cement mortar including all quoins, arches pillars etc but excluding ashlar facings ,dressed stonework and precast concrete articles and stacking the serviceable materials within 100m and disposal of unserviceable material, debris and rubbish to a distance not exceeding 100m complete all as specified and directed.

PCC 1:3:6 (nominal mix) type C-2 (using 40mm graded crushed stone aggregates) as in surface channel and drains complete all as specified and directed.

RCC 1:1.5:3 (nominal mix) type A-1 (using 20 mm graded crushed stone aggregates ) as in slab and like including use and waste of form work complete all as specified and directed.

Brick work with old size fly ash bricks, class 7.5, straight or curved on plan exc. 6 metre mean radius built in cement mortar 1:6 (01 cement : 06 coarse sand) all as specified & directed.

Mild steel work as in framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

Mild steel TMT bars 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and as directed.

Rendering cement plaster 15mm thick in cement mortar 1:4 (1 cement : 4 coarse sand) in two layers (10mm thick first layer and 5mm thick second layer) on stone masonry or surface other than fair faces of brick wall or on concrete surfaces, surface finished even and smooth without using extra cement, all as specified.

150 mm thick plain cement concrete 1:4:8 (nominal mix) type D-2 (using 40 mm graded crushed stone aggregates) finished the surfaces, even and fair complete all as specified and directed.

Cement concrete work as in pavement/ hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete slab 25 cm or less including use and waste of form work complete all as specified and directed.

Forming 12 mm thick expansion joint filled with pre- formed bituminous filler and top with 30 mm primed and sealed with sealing compound grade 'A for' 200 mm thick cement concrete slab complete all as specified and directed. .

Forming construction joint 30mm deep x 10mm wide,filled with sealing compound grade 'A' complete all as specified and directed.

M/S RANA BUILDERS

KISHAN CONTRACTOR