Renovation and Rewiring for TEM facility at AMPRI,Bhopal

Amount

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box/celling rose and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group 'C'.

Wiring for circuit / submain wiring alongwith earth wire with the following size of FRLS PVC insulated copper conductor, single core cable in surface / recessed PVC conduit as required

2 X 1.5 Sq.mm + 1 X 1.5 Sq.mm earth wire.

2 X 2.5 Sq.mm + 1 X 2.5 Sq.mm earth wire.

2 X 4 Sq.mm + 1 X 4 Sq.mm earth wire.

2 X 6 Sq.mm + 1 X 6 Sq.mm earth wire.

4 X 6 sq. mm + 2 X 6 sq. mm earth wire

4 X 16 sq. mm + 2 X 6 sq. mm earth wire

Wiring for light /power plug with 2X4 sq mm FRLS PVC insulated copper conductor single core cable in surface /recess along 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6pin 15 / 16 & 5 / 6 amps modular socket outlet and 15 / 16 amps modular switch, connection, painting etc. as required.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess,complete with tinned copper bus bar, neutral bus bar, earth bar,din bar, interconnections, powder painted including earthing etc.as required. (But without MCB/RCCB/Isolator)

12 way double Door

Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required.

Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required.

Supplying and laying 25mm x5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection /terminating with G.I. nut bolt spring washer etc as required ( jointing shall be done by overlapping and with 2 set of G.I. nuts bolt & spring washer spaced at 50 mm )

Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm)

Supplying and fixing extra conduit down rod of 20 cm length G.I.pipe 15 mm dia, heavy gauge including painting etc. as required.

Supplying and fixing 5 amps to 32 amps rating, 240 volts 'C' series, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single Pole

Single Pole and Neutral

Triplae pole with neutral

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed/ XLPE aluminium conductor cable of 1.1 KV grade as required

3 1/2 x 70 sq.mm

3 1/2 x 95 sq.mm

3 1/2 x 120 sq.mm

3 1/2 x 240 sq.mm

3 1/2 x 300 sq.mm

Supplying and fixing follwing modular Switch/Socket on the exixting modular plate & switch box including connections excluding moddular plate etc as required.

5/6amps switch

3 pin 5/6 Amps Socket outlet

15/16 A switch

6 pin 15/16 A socket outlet

Telephone Socket outlet

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. (Make - BEC/Kissan/Kasta/ Supreme/ Sudhakar/ Reliance)

Supplying and fixing of following ways surface/ recessmounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required .

4 Way (4+12), double door,

Supplying and fixing of RJ-45 Computer socket outlet modular type with GIO box and modular plate i/c making connection etc. as reqd.

Supplying and Drawing of UTP 4 pair CAT 6 Cable in the executing surface recssed /Steel/PVC conduit,as required

one run of Cable

Supplyiong and Fixing following size/ Modular plate, GI box alongwith modular base & cover plate for modular switchesin recess ets as required

2 module

6 module

Supplying and fixing High Speed Grga Bit 8 pot switch on recess/ surface of the wall etc as complete make ( D-link,legrand,Cisco, digilink)

Supplying and fixing 30 pair MDF Box with krone module and subscriber terminal , Compatible with LSA IDC module and subscriber terminal block,3 0-pair distribution box for indoor, screw / key locking type in surface and recess etc as required

Supplying and Fixing TP sheet steel enclosure on surface/recess along with 32 amps ,415 volt 'C' curve TP MCB complete with Connection ,testing and commissioning etc as required

Supplying installation, testing and commissioning of 3 pole 100 Amp MCCB 16 KA, in existing panel including interconnection etc.as required (make legrand/hager /semans/ABB)

Supplying & laying at site XLPE Insulated PVC Sheathed steel Armoured under ground Electric cable with aluminium conductor for working voltage upto and including 1100 Volts to IS:7098 (Part-1) or IS:1554 (Part-I) with latest amendment as applicable of size 3 1/2 x 95 sqmm (make :Finolex /CCI/Polycab/ RR kable)

Supplying, installation, testing & commissioning of Outdoor type double door MV feeder pillar, having in-built locking arrangment, suitable for 415 V, 3 Phase, 50 Hz AC supply system having front surface area not less than 1.5 sq.mtr. fabricated from CRCA sheet steel of 2 mm thick for frame work, covers & doors, 3 mm thick for gland plates i/c cleaning & finishing complete with 7 tank process for powder coating in approved shade, having 250 Amp capacity extensible type TPN Aluminium Alloy bus bars of high conductivity, DMC/SMC bus bar supports, with short circuit with stand capacity of 31 MVA for 1 Sec, bottom base a size of MS section not less than 50mm x 50mm x 5 mm thick, alongwith 1.0 Mtr. long legs of same size entire panel shall have a common aluminium earth bar of size 25mm x 5mm at the rear with 2 Nos. earth stud, having solid connections from main bus bar to switch gears with required size of Aluminium Bus bar and control wiring with suitable size FRLS PVC insulated copper conductor Single core cable for votlage & current respectively, cable alleys, cable gland plates i/c providing following switch gears : (The depth of LT Panel shall not be less than 300 mm.), complete as per CPWD specification. (The board shall be dust & vermin proof free standing type Mounted on base channel of MS section.Installation with brick foundation pedestal of suitable size)

A (Incoming)-a) 320 Amp, 4 Pole, MCCB, having breaking capacity 25 kA, Microprocessor release, with over load and short circuit setting (Ics = 100% Icu) With spreader links and extended rotary handle. - 1 No. b) 3 Nos.(R-Y-B) Phase indication LED lamps with protection MCB/fuses - 1 Set, c) Multi-function metre (MFM) with to read V, I, Hz, PF, KW & KWH complete with 3 Nos. resin cast CTs of 400/5 Amp, class 1.0 accuracy and 15 VA burden, with control wiring - 1 Set. (d) Danger Plate shall be 150 mm X 100 mm of mild steel - 1 No. B) Bus Bar:-Electrolytic high conductivity TPN aluminium bus bars of minimum of 400 Amps capacity suitable for 415 V, 3Phase, 50 Hz AC supply-100% neutral with heat shrinkable coloured sleeves and i/c DMC/SMC bus bare cross section, size supports & their spacing etc. for withstanding fault level of 31 MVA for 1 Sec. C) Out going;- a) 100 Amp, 4 Pole, MCCB, having breaking capacity 25 kA, Thermal magnetic release with over load and short circuit setting (Ics = 100% Icu) With spreader links and extended rotary handle.- 3 Nos. b) 125 Amp, 4 Pole, MCCB, having breaking capacity 25 kA, Thermal magnetic release with over load and short circuit setting (Ics = 100% Icu) With spreader links and extended rotary handle.- 3 Nos. C) 63 Amp, 4 Pole, MCCB, having breaking capacity 18 kA, Thermal magnetic release with over load and short circuit setting (Ics = 100% Icu) With spreader links and extended rotary handle. - 1 Nos.

Supplying, installation, testing & commissioning of Outdoor type double door MV feeder pillar, having in-built locking arrangment, suitable for 415 V, 3 Phase, 50 Hz AC supply system having front surface area not less than 2.0 sq.mtr. fabricated from CRCA sheet steel of 2 mm thick for frame work, covers & doors, 3 mm thick for gland plates i/c cleaning & finishing complete with 7 tank process for powder coating in approved shade, having 250 Amp capacity extensible type TPN Aluminium Alloy bus bars of high conductivity, DMC/SMC bus bar supports, with short circuit with stand capacity of 31 MVA for 1 Sec, bottom base a size of MS section not less than 50mm x 50mm x 5 mm thick, alongwith 1.0 Mtr. long legs of same size entire panel shall have a common aluminium earth bar of size 25mm x 5mm at the rear with 2 Nos. earth stud, having solid connections from main bus bar to switch gears with required size of Aluminium Bus bar and control wiring with suitable size FRLS PVC insulated copper conductor Single core cable for votlage & current respectively, cable alleys, cable gland plates i/c providing following switch gears : (The depth of LT Panel shall not be less than 300 mm.), complete as per CPWD specification. (The board shall be dust & vermin proof free standing type Mounted on base channel of MS section.Installation with brick foundation pedestal of suitable size)

A (Incoming) :-a) 400 Amp, 4 Pole, MCCB, having breaking capacity 25 kA, Microprocessor release, with over load and short circuit setting (Ics = 100% Icu) With spreader links and extended rotary handle. - 1 No. b) 3 Nos.(R-Y-B) Phase indication LED lamps with protection MCB/fuses - 1 Set, c) Multi-function metre (MFM) with to read V, I, Hz, PF, KW & KWH complete with 3 Nos. resin cast CTs of 400/5 Amp, class 1.0 accuracy and 15 VA burden, with control wiring - 1 Set. (d) Danger Plate shall be 150 mm X 100 mm of mild steel - 1 No. B) Bus Bar:- Electrolytic high conductivity TPN aluminium bus bars of minimum of 630 Amps capacity suitable for 415 V, 3Phase, 50 Hz AC supply-100% neutral with heat shrinkable coloured sleeves and i/c DMC/SMC bus bare cross section, size supports & their spacing etc. for withstanding fault level of 31 MVA for 1 Sec. C) Out going:- a) 250 Amp, 4 Pole, MCCB, having breaking capacity 25 kA, Thermal magnetic release with over load and short circuit setting (Ics = 100% Icu) With spreader links and extended rotary handle.- 3 Nos. b) 125 Amp, 4 Pole, MCCB, having breaking capacity 25 kA, Thermal magnetic release with over load and short circuit setting (Ics = 100% Icu) With spreader links and extended rotary handle.- 3 Nos. c) 100 Amp, 4 Pole, MCCB, having breaking capacity 18 kA, Thermal magnetic release with over load and short circuit setting (Ics = 100% Icu) With spreader links and extended rotary handle. - 1 Nos.

Supplying and fixing following rating, four pole, 415 V, isolatorin the existing MCB Disgtribution board complete with connections, testing andcommissioning etc. as required

Supplying installation, testing and commissioning of 4 pole 63 Amp C Curve MCB 16 KA, in existing panel including interconnection etc.as required (make legrand/hager/ semans)

Supplying installation, testing and commissioning of 3 pole 63 Amp C Curve MCB 16 KA, in existing panel including interconnection etc.as required (make legrand/hager/ semans)

Providing & installation of maintainance free chemical earthing with the help of GI eath electrode 3 Mtrs. Long fabricated by encapsulating 2 nos. 65 X 6 mm GI strip primary earth electrode in B class GI pipe of 88 mm outer dia. As secondary electrode, sealed at bottom with solid conical GI base seal. The earth electrode has to be vertically driven into the rocky soil earth in 7 inches dia. hole of 3.7 mtrs. depth. The entire earthing is to be enclosed at the top with massonary chamber of size 450 mm X 450 mm made up of modular bricks of class designation 35 & also provided with square shape 300 mm cover of 6 mm thick MS sheet with frame. The vertically driven electrode to be filled with high ultra chemical 2 bags of 25 Kgs each advanced Heavy grade earthing compound mixed with black cotton soil complete as required.

Supplying,installation,testing and commissioning of prewired LED compact light fitting of following type complete with all accessories etc. recess/surface/panel/flase ceiling i/c connection with 3 x 1.5 sq. mm FRLS PVC insulated copper conductor wire earthing etc. as reqd.

a) LED BETTEN fittings surface/wall mounted in 4 feet length, 20/22 W 4000 lumens , cuminous efficiency 105 Lum//Watt, cool day light CRI 80, CRCA body , IP20 life L 70, 40 K, PF>0.95, THD<10% with PC glossy diffueser suitable for short circuit & over voltage cut off i/c connection with 1.5 sq. mm FRLS PVC insulated, copper conductor , single core cable & earthing complete etc. as reqd.

Supplying & fixing installation, testing and commissioning (at site) of 1400 mm sweep, ceiling fan 60W, 260 RPM, Air delivering 245 CM/H white ceiling fan including all accessories i.e. down rod, Fan hook, capacitor including connections as required complete as required (Make:Crompton/Orient/Bajaj )

SITC of Indoor Air cutain of min size of 3.5 Feet, suitable for upto 8 feet door height with copper motor winding single phase in MS body upto 80 % Dust Rejection etc as required.

SITC of 720P IR bullet cemera, Progressive scan RGB CMOS 1/3" H.264, 3-10.5 mm, TDN, WDR, zipsream, F Card support, POE, 24VAC/12VDC,Approved makes, Honeywell, Bosch,Axis.

SITC of 8 Chnnel NVR (without PC & Monitor)

SITC of 4 TB Hard Disk

M Y ELECTRICALS

ORIENTAL INTEGRATED FACILITY MANAGEMENT PVT. LTD.