Providing Cup Boards, Table partition wall and floor repair etc. District and Sessions Court (Nizarart Section), Berhampur Buildings.

Providing and fixing of wall panelling made out of 12mm thick BWR Ply and 4 mm thick verner over frame made of 19 mm thick vertical member placed at 2"-0" C/C with melamime polishing including costot of all materilas, labour etc complete.

Supplying fitting and fixing vetrified tile in floors of size 600mmX600mm coloured/printed series of approved make conforming to IS 13755 polymer grouted apoxi and filling joints with white cement of approved quality including cost of all materials labour T&P etc required for the work all complete as per direction of E.I.C (Excluding GST)

Supplying fitting and fixing of vitrified tile (COLOUR/PRINTED) of premium grade having thickness of 8mm to 10mm confirming to IS 13756 of 60cm x 60cm size in dados and landing on 25mm thick bed of cement mortar (1:1) jointed with neat cement slurry mixed with pigments to match the inside shade of the tile including rubbing, polishing etc. complete including cost conveyance of materials and labour with T&P required for the work etc. complete as per the direction of the Engineer-in-charge. (excluding GST)

Providing and fixing plain GYPSUM BOARD CEILING suspended from roof by adjustable g.i. ceiling angle with spread at a distance not more than 600mm fixed a rope by rowel plug and stiff cleat, gypsum board 12.5mm thick held by g.i. perimeter channel MF-3 and intermediate channel MF-7 framing boarding jointing and finishing with special type of gypsum compound etc. complete including cost conveyance of materials and labour with T&P required for the work etc. complete as per the direction of the Engineer -in-charge (excluding GST)

Providing fitting and fixing of CORNICE for gypsum board ceiling 4 wide of approved quality and approved make confirming to IS with necessary bends etc. complete fixed to wall with screws etc. as per the direction of the Engineer-in-charge including cost conveyance of materials and labour with T&P required for the work etc. complete as per the direction of the Engineer -in-charge (excluding GST)

Finishing wall surface of walls with acrylic WALL PUTTY (water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding, staging charges with cost conveyance cess and royalties of all materials and labour with T&P required for the work etc. complete in all respect in all floors. (excluding GST)

Wall painting two coat with PLASTIC EMULSION PAINT of approved shade and approved make to give an even shade after scrapping old paint with scrapper, washing with soda water including cost conveyance cess and royalties of all materials and labour with T&P required for the work etc. complete in all respect in all floors. (excluding GST)

Providing fitting and fixing of PARTITION walling OEL aluminium anodized section no. 9210 and 9207 as single groove and double groove respectively and horizontal and vertical member and OEL section 4660 as tapered clip for fixing up 12mm thick pre-laminated board (Nova pan make) and jointing angle no. 1855 etc. with cost of all materials, labour cess etc. complete. (excluding GST)

Supplying fitting and fixing 32mm thick FLUSH DOOR both side skin moulded at in back and the size of outer frame being of 33 x 57 mm. Accessories/gaskets are to be used as per the manufacturers supply and specification like handle, lock and floor spring of approved quality including cost conveyance and labour with T&P etc. complete. (excluding GST)

Supply and fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complite with frame, shutters and all fitting and fixtures