Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹23.3 LAccepted-AOC | L1 | Accepted-AOC Reasonable rate | |
| 2 | L2₹25.4 L+₹2.0 L (8.74%)Rejected-Finance HOUSE NO 59 THILIXU VILLAGE BLOCK V PS POST DIMAPUR NAGALAND 797 112 | DIMAPUR | DIMAPUR | NAGALAND | 797112 | L2 | Rejected-Finance High rate quoted other than L1 | |
| 3 | L3₹26.0 L+₹2.6 L (11.3%)Rejected-Finance H NO 400 FLAT NO 13 A SEMATILLA DIMAPUR 797112 NAGALAND | DIMAPUR | DIMAPUR | NAGALAND | 797112 | L3 | Rejected-Finance High rate quoted other than L1 |
Tender Value
₹22.5 L
EMD Value
₹45,000
Closing Date
9 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Col N K Chaudhary
HQ 137 WKS ENGR PIN 914137 CO 99 APO
PROVN OF TOILET BLOCK(06 X TOILET AND 06 X BATHROOM) WITH OVER HEAD WATER TANK NEAR BLDG NO T 108 AT ZAKHAMA MIL STN
2023_MES_612630_1
8809/E8
Open Tender
Civil Works
Item Rate
180 days
Zakhama
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
AGE (I) Zakhama
₹45,000
Yes
25 Oct 2023
8 Aug 2023
16 Sept 2023
8 Aug 2023
9 Sept 2023
26 Aug 2023
Amount
Surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out in soft/ loose soil complete all as specified and directed.
Excavating over areas, n exc 1.5 m deep and getting out in hard/dense soil etc complete all as specified and as directed.
All as per item No 02 above but depth exc 1.5m but n.exc 3m as directed by complete all as specified and as directed..
Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil etc complete all as specified and as directed.
Material and labour for PCC (1:2:4) type B2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed.
Returning, filling in, of hard/dense soil including spreading leveling, watering and well ramming in layers not exceeding 25 cm complete all as specified and as directed
Removing excavated soil to a distance n.exc 50M and deposited/ spreaded where directed at a level n. exc 1.5 M above the starting point complete all as specified and as directed.
Material and labour for RCC M-30 (Design Mix) (using 20mm graded stone aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed. Note:- Design mix to be got approved from Accepting Officer before incorporation in the work.
Material and labour for use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter with rough finished surfaces of concrete, flat complete all as specified and as directed.
Material and labour for mild steel TMT bars 10mm dia and over, cut to length bent to shape required, including cranking bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and as directed.
Material and labour for mild steel TMT bars 6mm to 8mm dia, cut to length bent to shape required, including cranking bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and as directed.
Material and labour for Mild steel TMT bars 5mm dia. and over upto and including 10mm dia in stirrups, spacers and binders and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed.
Material and labour for RCC M-30 (Design Mix) (using 20mm graded stone aggregate) as in columns, pillars, piers, posts and struts concrete complete all as specified and as directed. Note:- Design mix to be got approved from Accepting Officer before incorporation in the work.
Material and labour for use and waste of form work to sides of pillars, posts, struts, piers, piers, columns and stanchions of square, rectangular or polygonal shape with rough finished surfaces of concrete complete all as specified and as directed
Material and labour for brick work with sub class `B` bricks, old size, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed.
Material and labour Brick work with sub class B bricks straight or curved on plan to any radius in half brick thick walls, built in cm 1:4 complete all as specified and directed.
Material and labour for use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc with rough finished surfaces of concrete flat complete all as specified and as directed.
Material and labour for RCC M-30 (Design Mix) (using 20mm graded stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed. Note:- Design mix to be got approved from Accepting Officer before incorporation in the work.
Material and labour for RCC M-30 (Design Mix) (using 20mm graded stone aggregate) as in Chajjas complete all as specified and as directed. Note:- Design mix to be got approved from Accepting Officer before incorporation in the work
Material and labour for use and waste of formwork to chullah hoods, chajjas, troughs and similar items including edges with rough finished surfaces of concrete flat complete all as specified and as directed
Materials and labour for 10 mm thick rendering on other than fair faces of brick work or concrete surface as on wall in cement mortar (1:6) and finished the surfaces even and smooth without using extra cement complete all as specified and as directed.
Material and labour for 15mm thick rendering in CM (1:4) on brick work or concrete surface as on wall mixed with integral water proofing compound @ 3% by wt of cement, finished the surface even and fair complete all as specified and directed. (Note:Water proofing compound shall be measured & paid separately)
Supply only integral water proofing compound (WPC) of best quality (ISI marked) complete all as specified and as directed.
Supply and fix 125x60mm size pressed steel, frames for door with one or more rebates including necessary fixing lugs, hinges,lock strike plate, etc, complete all as specified and as directed.
Materials and labour for PCC 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as in pressed steel door/ roof kerbs / benching / Cover fillets etc complete all as specified and directed.
Supply and fixing for factory made 35mm thick second class hardwood plain framed panelled shutters (two panels) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm thick veenered particle board with commercial veenering on both faces. The size of rail and stiles shall be as per IS: 1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and as directed.
Supply and fixing aluminium frame for doors, windows, ventilators, powder coated of any colour (thickness of powder coating shall be not less than 50 micron) with one or more rebates including jointing cleats for fixing to wall with necessary fittings complete all as specified and directed.
Supply and fixing 4.0 mm thick figured glass,pin head and securing in wooden / metal frame ordinary quality and glazing with oil putty, glazing pin or beads as required etc in square exe 0.50 Sqm in each pane complete all as specified and directed.
Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and as directed.
Supply and fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded decorative coloured laminates PVC `C` channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and decorative coloured laminates PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail or bottom rail ; panelling of decorative coloured laminates PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC laminated sheet beeding, and joined together with solvent cement, supplying and fixing in the frame at the site as per specification complete all as specified and as directed.
Supply and fixing 100mm size mild steel butt hinges medium weight,fixed type B-21, cold rolled complete all as specified and as directed.
Supply and fixing aluminium anodized, barrel tower bolts, 200mm long and 10mm dia of extruded section complete all as specified and as directed.
Supply and fixing extruded aluminium alloy handles, fabricated type, anodised 150mm size complete all as specified and as directed.
Supply and fixing 150mm long and 16mm dia aluminium alloy, anodized, sliding door bolt with hasp, staple(bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolts and sliding bolts,of extruded sections or cast aluminium alloy complete all as specified and as directed.
Material and labour for mild steel works as in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed.
Materials and labour for preparation of newly plastered surfaces of wall and applying three coats of white wash complete all as specified and as directed.
Materials and labour for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and as directed.
Material and labour for preparation of new steel surfaces to receive painting over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.
Material and labour for preparation of new or previously untreated wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.
M&L 25mm thick PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate as in drains/floor finishing even and rough including necessary formwork complete all as specified and directed.
Material and labour for 75 mm thick Plain Cement concrete type D-2, 1:4:8 (using 40mm graded aggregate) as in sub base of floor, finished the surface fair and even complete all as specified.
Material and labour for Non - skid coloured Ceramic tiles (No. 1 quality / Premium quality) 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in Cement mortar 1:4 complete all as specified and as directed.
Material and labour for 20-25 mm thick machine cut kota stone slab shall be laid on floor, laid and jointed with grey cement slurry mixed with pigment to match the colour / shade of the slab over and including 20mm thick screed bed / bedding layer in cement mortar (1:4) with roughening of surface, including rubbing and polishing complete all as specified and as directed.
Material and labour for 25mm thick granite (of any type) work (table rubbed and polished) in steps, jambs,pillars window cills, cooking platforms and like etc and fixed over and including 15mm thick cement plaster in cement mortar (1:6) and pointing with white cement mixed with pigment to match the shade of granite (1:2) using marble dust complete all as specified and as directed.
Supply and fixing for 20mm thick Udaipur green marble stone (table rubbed and polished) in steps, jambs, window cills, cooking platforms and like etc and fixed over and including 15mm thick cement plaster in cement mortar (1:6) and pointing with white cement mixed with pigment to match the shade of granite (1:2) using marble dust complete all as specified and as directed.
Material and labour for 20-25 mm thick machine cut kota stone slab shall be laid on riser of step,skirting, dado, wall / column / vertical surfaces, laid and jointed with grey cement slurry mixed with pigment to match the colour / shade of the slab over and including 10mm thick plastering / backing coat in cement mortar (1:4) with roughening of surface, including rubbing and polishing complete all as specified and as directed.
Material and labour for cloured glazed ceramic tiles (No. 1 quality / Premium quality) in vertical surface 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick cement plaster in CM(1:4) complete all as specified and as directed.
Material & Labour for 75mm thick, PCC 1:3:6, Type C-1, using 20mm graded aggregate as in Plinth protection etc surface finished even and smooth without using extra cement and providing necessary joints 12mm wide to the full depth of PCC at every 3 meters and every change of directions and the joints duly filled with mastic filling comprising of 01 Part of heated bitumen blown grade any penetration and 3 parts of sand [all by weight] complete all as specified and as directed.
Material and labour for broken stone hardcore of gauge n.exc 63mm, deposited, spread and levelled in layers n.exc 15cm thick, watered and rammmed to a true surface complete all as specified and as directed.
Supply and fixing 10 litre capacity low level PVC flushing cistern (any colour), syphonic action type, with inlet, ball valve, float, handle, fixed with cast iron bracket (of suitable size) and providing 32 mm dia PVC flush pipe and making all necessary connections complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing 110 mm bore PVC (SWR) bends/connector in any radius any type complete all as specified and directed.
Supply and fixing vitreoues china coloured wash down water closet pan (pedestal pattern) with 'P' or 'S' trap, front or back inlet, fixing bolts with coloured PVC seat cover and making all necessary connections complete all as specified and directed.
Supply and fixing Vitreous china toilet paper holder complete all as specified and directed.
Supply and fixing vitreous china bowl pattern urinal, flat back of size 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe and waste coupling of PTMT (half or full threaded) including connections to flushing pipe and outgoing pipes complete all as specified and as directed.
Materials and labour Bottle trap of PTMT having minimum water seal of 25mm .(Minimum weight 32mm-260gms/ 40mm-270 gms) complete all as specified and as directed.
Supply and fixing Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc.any type of pipe complete all as specified and directed.
Supply and fixing for vitreoues china WHB, white, flat back, of size 600X480mm including pillar tap,cast copper alloy,Chromium plated,fancy type,15mm dia with capstan head,screwed down high pressure with or with out lettered "Hot or Cold" with long screwed shanks and fly nuts screwed for iron pipe and 32mm dia PTMT waste coupling with long screw shanks and fly nuts, flange end bedded in red led cement and other end fixed, rubber plug with rings incl CI bracket, cutting for end pinning in ends of brackets or erecting stand, 32mm bore PVC flexible waste pipe,PVC connection of 15mm bore and 450mm long with PTMT check nut and union etc. complete all as specified and as directed.
Supply and fixing towel rail of PTMT 600mm long fixed with and including Chromium plated brass screws and wooden/plastic cleat (minimum weight 190gms) complete all as specified and as directed.
Supply and fixing swivel shower of PTMT any colour for fixing with 15mm pipe (minimum weight 40gms) with shower arm 15mm size, 195mm long with bend of 45 degree with flange of PTMT complete all as specified and as directed.
Supply and fix soap dish, vitreous china white, approx size 160mm x 160mm x 90mm , fixed to wall with plugs and CP brass screws complete all as specified and directed.
Supply and fixing 110 mm bore dia PVC (SWR) pipes double socketed, in any length with rubber ring loints, fixed to walls complete all as specified and directed.
Supply and fixing 110 mm bore dia PVC (SWR) pipes double socketed, in any length with rubber ring loints, laid in trenches or floor complete all as specified and directed.
Supply and fixing 110 mm bore PVC (SWR)vent cowl in any types complete all as specified and directed.
Supply and fixing 75 mm bore dia PVC (SWR) pipes double socketed, in any length with rubber ring loints, fixed to walls complete all as specified and directed.
Materials and labour PVC (SWR) gully trap 125/110mm, setting and jointing with solvent complete all as specified and directed.
Supply and fixing 75 mm bore dia PVC (SWR) pipes double socketed, in any length with rubber ring loints, laid in trenches or floor complete all as specified and directed.
Supply & fixing 110 mm bore PVC [SWR] Junction single [single "Y"] equal or unequal including jointing with solvent cement complete all as specified and as directed.
Supply and fixing 75 mm bore PVC (SWR) bends in any radius complete all as specified and directed.
Supply and fixing 75 mm dia PVC (SWR) floor trap outlet with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B1 (Using 20 mm graded stone aggregate) and making good the disturbed surfaces to match with existing complete all as specified and directed.
Material and labour for rolled mild steel for roof trusses ( framed), trussed, purlins, crane grantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe 410-W (Gde-E-250) quality-A complete all as specified and directed.
Supply and fixing 0.50mm thick pre-painted galvalume aluminium Zinc coating GI based corrugated / semi corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as per manufacturer instruction complete all as specified and as directed.
Material and labour for RCC M-30 (Design Mix) (using 20mm graded stone aggregate) as in slabs supported on wall / beams / columns in floors / roofs/ shelves and the like complete all as specified and as directed. Note:- Design mix to be got approved from Accepting Officer before incorporation in the work.
Material and labour for use and waste of form work to soffits of suspended slab such as roof slabs, floor slabs, landing and similar work, etc. not exceeding 200mm thick with rough finished surfaces of concrete flat complete all as specified and as directed.
Material and labour for use and waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 10cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 5cm but n exc 10cm wide with rough finished surfaces of concrete complete all as specified and as directed.
Materials and labour for rendering 15mm thick plaster in cement mortar (1:4) on brick/stone masonry and concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.
Supply and fixing 15mm bore galvanised steel water tubing medium grade including all fittings and fixed complete to walls/ceiling or laid under floors complete all as specified and as direcetd.
Supply and fixing 20mm bore galvanised steel water tubing medium grade including all fittings and fixed complete to walls/ceiling or laid under floors complete all as specified and as direcetd.
Supply, hoisting and fixing in proper position ISI marked Three-layer rotational moulded polyethylene water storage tank (cylindrical vertical with closed top), of capacity 1000 litres with and including 20mm bore PTMT float ball valve and flynut, screwed for iron pipe or brass ferrule set including providing necessary connections complete all as specified and as directed .
Supply and fixing 15mm bore stop valve, cast copper alloy, screwed down high pressure, with crutch or butterfly handle screwed both ends fixed to GI pipe complete all as specified and as directed.
Supply ,install ,testing and commissioning of electric storage water heater of cap 25 ltr vertical type, 5 star rating complete including grouting/screwing to brick wall/wooden frame for fixing arrengement of geyser and making good disturbed surface of wall complete all as specified and as directed. Note:-Geysers shall be standard make ISI marked/BEE-5 star rated,vertical type and installed with the following:- (a) Plug & socket (b) vent pipe (c) Fusible plug (d) Pressure reducing valve in case of multi stories Bldg (e) Safety valve (f) Proper earth connection.
Material and labour for PCC (1:3:6) type C2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed.
Material and labour for use and waste of form work to soffits of suspended slab such as roof slabs, floor slabs, landing and similar work, etc. not exceeding 200mm thick with rough finished surfaces of concrete flat complete all as specified and as directed.
Materials and labour for 15 mm thick rendering on brick or concrete surface in cement mortar (1:3) and mixed with integral water proofing compound @ 3% by wt of cement, finished the surface even and fair complete all as specified and directed. (Note:Water proofing compound shall be measured & paid separately)
Supply & fixing 75 mm bore PVC [SWR] Junction single [single "Y"] equal or unequal including jointing with solvent cement complete all as specified and as directed.
Supply & fixing 75 mm bore PVC [SWR] Junction single [single "T"] equal or unequal access door including jointing with solvent cement complete all as specified and as directed.
Supply and fixing 75 mm bore PVC (SWR) vent cowl in any types complete all as specified and directed.
Supply and fixing 110 mm bore PVC (SWR) bends with access door in any types complete all as specified and directed.
Supply and fixing 110 mm bore PVC reducer (SWR) in any types complete all as specified and directed.
Material and labour PCC 1:4:8 type D-2 (using 40mm graded aggregate) as in Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested for 110mm dia pipe complete all as specified and directed.
Material and labour for point wiring (surface type) for one light/fan/call bell point with 1.5 sqmm PVC insulated (FR-LSH) unsheathed copper cable multistranded conductor 1100 volts grade controlled by one way switch including 1.5 sqmm PVC (FR-LSH) insulated unsheathed copper cable multistrand conductor 1100 volts grade for continuity earth wire connected to common earth dolly drawn through and including PVC casing caping of suitable size with all accessories and PVC rectangular boxes for mounting switch, socket and fan regulator etc complete all as specified and as directed. Note: (i) Wiring shall be done in proper colour coding using red , yellow, blue for phase, black for neutral and green for earth. (ii) The cost of making good the disturbed surfaces is deemed to be included in the quoted rate.
All as per item No 91 above but for 3 pin,5 Amp switch Socket outlet on independent board complete all as specified and directed.
Supply and fixing Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps and complete all as specified and directed.
Supply & fixing Switch socket combination 2 in 1, 3 pin, 5 Amp flush type universal controlled by one switch flush type complete all as specified and directed.
Supply and fixing LED lights fitting 1x 20W, 220V,with necessary fitting and fixtures including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. Note:-Light fitting shall be of PF>0.95.
Supply and fixing ceiling rose, PVC/polycarbonate, isolated body surface bakelite, 65mm x 25mm, ISI marked three terminals complete all as specified and directed.
Supply & fixing switch piano flush type (ISI marked), single pole, one way 5 Amp, 240 Volts complete all as specified and directed.
Supply and fixing PVC rectangular block size 250X150X50mm depth 3 mm thick complete all as specified and directed.
Supply & Fixing MCB DB, SPN, 8 Way, 240 Volts, with DIN Channel, Double Door with 200 Amps rated bus bar suitable for mounting MCBs flush mounted with wall complete all as specified and as directed.
Supply and fixing MCB 32 Amps, SPN, 240V, 10KA, 'C' curve complete all as specified and as directed.
Supply and fixing MCB 6 to 32 Amps, SP, 240V, 10KA, 'C' curve complete all as specified and as directed. Note:for serial Item No 99 to 101: MCB and MCB DB shall be of same make as approved by AGE (I).
Supply and fixing 1100 volts grade heavy duty twin core 10 sqmm cable PVC insulated aluminium stranded conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire complete all as specified and as directed.
Material and labour for sub main wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 4.0 sqmm (Nominal area) drawn through in and including PVC Casing/Caping with all fitting and accessories alongwith one single core green colour PVC insulated unsheathed 1100 volt grade multi standerd FRLS Copper Conductor cable of size 4.0 sqmm as earth lead and connected to earth dolly making good to disturbed surface complete all as specified and directed. Note:- 3 Runs of 4.0 sqmm cable and one run of PVC casing/Caping shall be measured as one unit length.
Material and Labour for House service bracket (hook type complete with 3.0m long G.I. pipe 40mm dia Medium grade, two nos. 90 degree bends, M.S. hook and stay or guy including dismantling of existing old unserviceable house service brackets, any type complete all as specified and as directed.
Supply and fixing RCBO -A type (SPN-2M) in accordance with IS 12640-2 & IES 61009-1) 240V /415V,50Hz, 30mA,10 KA for earth leakage overload protection and short circuit capacity of rating 20/25 Amps complete all as specified and as directed.
Supply and fixing 10W mirror LED light,LED batten and aluminium housing, 240V complete all as specified and as directed. Note:-Light fitting shall be of PF>0.95.
Materials and labour for earthing complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly and preferably vertically in ground, earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 m below ground level connetced with galvanised wire of 4mm dia by means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead to be protected by galvanised iron pipe of 15mm bore (light grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20mm bore galvanised iron pipe (medium grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia) including necessary earth work in excavation, returning filling and removal of surplus earth upto a distance not exceeding 50 m etc all as shown on electrical plate No. 3 of MES Schedule Part-I(2009) complete including testing on completion all as specified and as directed. Notes:- (i) Main earthing strip from earth plate electrode to rest point upto length of 7.5 meters length shall deemed to be included in the unit rate quoted against this item. (ii) On testing after completion if the desired resistenance is not obtained the contractor shall redo the earthing without any extra cost to the department.
Shri Atoshe Tuccu
M/S ARVIND GROUP OF CONSTRUCTION & INFRASTRUCTURE
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .