SPECIAL REPAIR OF FENCING ALONGWITH PERIMETER AT 112 ENGR REGT UNDER GE TAWANG

Amount

Dismantling fencing wire mesh , any type, complete all as specified and directed.

Dismantling posts struts (wood , steel or RCC) any section incl taking out embedded portion in concrete or brick and making good, complete all as specified and directed.

Excavating in post holes (or similar holes) each not exc 0.5 Cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance n exc 50M and making good surface and getting out in hard/dense soil.

M & L for cement concrete 1:3:6 type C2 (using 40mm graded aggregate) in post holes for fixing of posts, walls or retaining walls, any thickness,size or shape including pilasters, butttressses columns, pillars boundary pillars complete all as specified and directed.

S & F rolled mild steel joist, channel, angle or tee section fixed independently without connectiong plates etc cut to ordinary length as directed. Steel shall be of FE 410-W (Gde-E-250) Quality A.

S & F for hand rails, half round or other steel section or core for wooden hand rail straight portion, drilled and countersunk for balusters running bars, for doors, blusters, nosing to steps including embeding in concrete and screwing etc, wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes notching for wire etc including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-290 Gde E-165 Size 50 X 6mm

Supply of chink link MS galvanised fencing any size or type

Fixing only chain link fencing including line wires any mesh, size and type to any type of standards rails, straining bolts, etc including provision of binding wire.

S & F for galvanised, 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and proision of galvanised mild steel wire, staples or steel pins as directed (each line wire to be measured

S & F of TMT bars 10mm dia and over cut to length bent to shape required, including cranking, bending, hooking ends etc., to be used for holding and straightening of fencing wire mesh and similer works complete all as specified and directed.

M & L for two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer on new steel surfaces.

M/S KESANG CONSTRUCTION

L T CONSTRUCTION

DEOGRATIES SEMPER AMA ASSOCIATE

M/S GOLANG CONSTRUCTION CO.

M/S D L ENTERPRISES

M/S ARUNACHAL VIKASH

M/S RINCHIN DORJEE CONSTRUCTION