Layer-3 Distribution Switch
Layer 2 Access Switch
Wirele Average Turn Over of Last 3 Years 300 Lakh (s) Layer-3 Distribution Switch ( 4 ) Technical Specifications Specification Specification Name Values Allowed Values Generic No of SFP/SFP+ Ports 48 16
24
32
48 Type of SFP Port 10G 1G
10G Support for 10 G SFP+ Port (Uplink) No Yes
No Number of 10G SFP+ Port (Uplink) 0 Support for 40G (QSFP+)(Uplink) Yes Yes
No No. of 40 G QSFP+ Port (Uplink) 48 Support for 100 G QSFP+ Port (Uplink) No Yes
No No. of 100 G QSFP+ Port 0 Support for Active Active High Availability Yes Yes
No Redundant Power supply available - 1/15 Console Port available - Management Port (RJ 45) available - No. of FAN Tray 3 - No. of Open slot for additional Interface Card 0 - Operating System Available - Stacking Port/Slot from day one No - Switching Capacity (Non Blocking)(Gbps) 1280 - Throughput (MPPS) 909 - Advance Layer-3 Protocol RIP
EIGRP stub
OSPF
PBR
IPv4 & IPv6 EIGRP stub routing
WCCP
IPV6 uRPF
IPV6 PBR
VRRPv3
Policy Classification Engine
HSRP v6 FROM DAY-1 and should be upgradable to BGP
IS- IS
VRF-lite
IPV4 & IPV6 PIM routing & RIPng 32K Mac and 24K IP routes. 8 GB RAM and 8 GB Flash from Day 1 - Security Feature IEEE 802.1x
port security
Dynamic Host Configuration Protocol (DHCP) Snooping and Guard
Dynamic ARP Inspection
RA Guard
IP Source Guard
control plane protection (CoPP)
Unicast Reverse Path Forwarding (uRPF)
RADIUS
TACACS+
IPv4 and IPv6 ACLs
Multilevel security on console access
Storm Control (Unicast
Multicast and Broadcast)
Private VLANs
complete identity and security; IEEE 802.1AE capable in hardware & Device Sensor. EAL/NDPP & IPv6 Logo certified from Day 1 - 2/15 Management Protocol SSHv2
SNMPv2c
SNMPv3
NTP
RADIUS and TACACS+. Switch shall support application visibility and traffic monitoring with minimum 24 K netFlow/sflow/jflow entries. Support VSS or equivalent function for virtualize two redundant switches as single logical entity in network topologies and from an operation perspective and increases overall network bandwidth. - QoS Shall have 802.1p class of service
marking
classification
policing and shaping. Should support strict priority queuing.NOTE: Bidder has to submit the OEM Authorization for this tender. - Wattage (Watt) 750 - Dimension/Form Factor(RU) 1 - Operating Temperature Range (Degree C) -5 to 45 °C - Operating Humidity (RH) (%) 10% to 95% - IPv6 Ready from day one and dully certified Yes - On Site OEM Warranty (Year) 5 1
3
5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Chandrashekhar Jaiswal 462016
vallabh bhavan mantralaya 4 40 Layer 2 Access Switch ( 75 ) 3/15 Technical Specifications Specification Specification Name Values Allowed Values Specification Type of Switch Managed Managed
UnManaged
Web Managed Technology Non PoE PoE
Non PoE
PoE+
UPoE Number of 1G Copper Ports 48 8
12
16
48
0 Number of 10G Copper Ports 0 No. of 1 G SFP Port (Uplink) 0 No. of 10 G SFP+ Port (Uplink) 2 Multi-Gigabit Support No Yes
No Redundant Power supply ( from day one) Supported Available
Not available
Supported & Part of Supply
Supported Console Port Available - Switching Capacity -Non Blocking (Gbps) 176 - Throughput (MPPS) 130 - Operating System available - Dedicated Stacking Port/Slot ( from day one) Supported - Stacking Bandwidth (Gbps) 80 - Basic Layer-3 Protocol Advanced L3 features like static IP routing
RIP
PIM
OSFP & PBR from day 1. Bidder need provide all necessary license. - Security Feature EAL/NDPP & IPv6 Logo certified. IPv6 Binding Integrity Guard
IPv6 Snooping
IPv6 RA Guard
IPv6 DHCP Guard
IPv6 Neighbor Discovery Inspection and IPv6 Source Guard. 802.1x authentication and accounting
IPv4 and IPv6 ACLs and Dynamic VLAN assignment. Switch - 4/15 should support port security
DHCP snooping
BPDU Guard
Spanning tree root guard. Management Protocol SSHv2
RADIUS and TACACS+ . IEEE Standards of Ethernet: IEEE 802.1D
802.1s
802.1w
802.1x
802.3ad
802.3x
802.1p
802.1Q
802.3
802.3u
802.3ab
802.3z. Support external/internal power supply. 12 K MAC Addresses and 250 active Vlans. Application visibility and traffic monitoring with minimum 12 K netFlow/sflow/jflow entries. NMS with required nos. of license for AP and switches from same OEM of Switches and AP. - QoS Eight egress queues per port. Energy- efficient Ethernet (EEE) support reduces power consumption in accordance with IEEE 802.3az Support ACL for both for ingress and egress port. Cross- stack QoS to allow QoS to be configured across a stack All the Layer 2 Access switch from same family can be stack as an when needed using delicated stacking port and cable. 24 Port and 48 Port switch must be stack together. - Operating Temperature Range (Degree C) -5º to 45ºC - Operating Humidity (RH)(%) 10% to 90% - 5/15 IPv6 Ready from day one and dully certified Yes - PoE Power Budget ( Watt ) 0 - on Site OEM Warranty 5 1
vallabh bhavan mantralaya 75 40 Layer 2 Access Switch ( 28 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Type of Switch Managed Managed
Web Managed Technology PoE+ PoE
Supported Console Port Available - Switching Capacity -Non Blocking (Gbps) 176 - Throughput (MPPS) 130 - Operating System available - Dedicated Stacking Port/Slot ( from day one) Supported - 6/15 Stacking Bandwidth (Gbps) 80 - Basic Layer-3 Protocol Advanced L3 features like static IP routing
IPv4 and IPv6 ACLs and Dynamic VLAN assignment. Port security
Spanning tree root guard. - Management Protocol SSHv2
802.3z. Support external/internal power supply. 12 K MAC Addresses and 250 active Vlans. Application visibility and traffic monitoring with minimum 12 K netFlow/sflow/jflow entries. NMS : required nos. of license for AP and switches from same OEM of Switches and AP. - QoS Eight egress queues per port. Energy- efficient Ethernet (EEE) support reduces power consumption in - 7/15 accordance with IEEE 802.3az Support ACL for both for ingress and egress port. Cross- stack QoS to allow QoS to be configured across a stack All the Layer 2 Access switch from same family can be stack as an when needed using delicated stacking port and cable. 24 Port and 48 Port switch must be stack together. Operating Temperature Range (Degree C) -5º to 45ºC - Operating Humidity (RH)(%) 10% to 90% - IPv6 Ready from day one and dully certified Yes - PoE Power Budget ( Watt ) 370 - on Site OEM Warranty 5 1
vallabh bhavan mantralaya 28 40 Layer 2 Access Switch ( 9 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Type of Switch Managed Managed
UPoE Number of 1G Copper Ports 24 8
0 Number of 10G Copper Ports 0 No. of 1 G SFP Port (Uplink) 0 8/15 No. of 10 G SFP+ Port (Uplink) 2 Multi-Gigabit Support No Yes
Supported Console Port Available - Switching Capacity -Non Blocking (Gbps) 128 - Throughput (MPPS) 95 - Operating System available - Dedicated Stacking Port/Slot ( from day one) Supported - Stacking Bandwidth (Gbps) 80 - Basic Layer-3 Protocol Advanced L3 features like static IP routing
IPv4 and IPv6 ACLs and Dynamic VLAN assignment. Switch should support port security
9/15 802.1p
802.3z. Support external/internal power supply. 12 K MAC Addresses and 250 active Vlans. Application visibility and traffic monitoring with minimum 12 K netFlow/sflow/jflow entries. NMS : required nos. of license for AP and switches from same OEM of Switches and AP. QoS Eight egress queues per port. Energy- efficient Ethernet (EEE) support reduces power consumption in accordance with IEEE 802.3az ACL for both for ingress and egress port. Cross-stack QoS to allow QoS to be configured across a stack All the Layer 2 Access switch from same family can be stack as an when needed using delicated stacking port and cable. 24 Port and 48 Port switch must be stack together. Product include 30 nos. of stacking module compatible with proposed 24 Port and 48 Port switch. - Operating Temperature Range (Degree C) -5º to 45ºC - Operating Humidity (RH)(%) 10% to 90% - IPv6 Ready from day one and dully certified Yes - PoE Power Budget ( Watt ) 370 - on Site OEM Warranty 5 1
5 * Bold specifications are the golden parameters. Consignees and Quantity 10/15 S.No. Consignee Address Quantity Delivery Days 1 Chandrashekhar Jaiswal 462016
vallabh bhavan mantralaya 9 40 Wireless Access Point ( 175 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Type of Access Point Controller Based Stand alone
Controller Based Deployment Indoor Indoor
Outdoor Mounting Ceiling - Antenna Type Internal - Number Of Radios Dual - Frequency Band 2.4 GHz & 5.0 GHz - Supported Wi-fi Standards 802.11a
802.11b/g
802 .11 b/g/n
802.11ac
802.11 a/b/g/n/ac
802.11ac Wave 1
802.11ac Wave 2 - Wireless Speed Up to (Mbps) 1700 Max Wireless Signal Range im Mts AP with Licenses compatible with existing WLC. Channel Width (MHz) 80 - Maximum Data Rate MBps 1700 - Supported Encryption WEP
WPA-PSK
802.11 WEP
WPA- TKIP
WPA2 AES
802.11i
EAP-TLS.
WEP
WPA-TKIP
802 .11
EAP-TLS
WPA AES Dedicated Console Port Available - Receiver Sensitivity in db -101 - Transmit power (tx)(dBm) 22 - Radio Resource Management such for power channel
coverage hole Available - 11/15 detection and performance optimization Support for Load Balancing between 2-4 Ghz and 5 Ghz Available - Support for Configurable Carrier Threshold Not Available - Device Management Web-based Configuration Interface (GUI) - Support for Mesh Networking Not Available - Support for QoS for Voice over Wireless Available - Support for MU-MIMO Available - Number of MIMO supported & Spatial Streams 4 x 4 :4 - Number of WLAN (SSID) per AP 16 - Maximum clients Nos 400 - Support for Autonomous access- point option Available - USB Ports Available - Number of 10/100/1000 port 2 - mGig support Not Available - Fiber port (in case of outdoor AP) Not Available - Support for Bluetooth Low Energy (BLE) support on AP Not Available - Support for Beam forming Not Available - Operate as a sensor for wireless IPS Not Available - Support for QoS and Video Call Admission Control capabilities Available - Support for Rogue access point detection Not Available - Support for Wireless Intrusion Protection System Not Available - 12/15 WPC certified Yes - Wi-Fi CERTIFIED Yes - Support non-Wi-Fi detection for off- channel rogues and Containment for both radio while serving the client simaltaniously Not Available - Powering options (Such as AC/DC
802/3af PoE
802/3at PoE+)
specify AC/DC With With Power Addopter
802.3at PoE+ - Power POE (Watt) 20.9 - Environmental Standard : plenum- rated (UL2043) for Indoor and IP67 for Outdoor Yes - Operating Temperature Range (Degree C) 0° to 50°C - Operating Humidity (%RH) 90 - Dimension (mm x mm x mm) 210.8 x 210.8 x 50.8 - Weight (grams) 1410 - On Site OEM Warranty (Years) 5 1
vallabh bhavan mantralaya 175 40 Small Form-factor Pluggable Transceiver ( 120 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Type of Transceiver SFP+ SFP
SFP+
QSFP+ 40G
QSFP+ 100G
SFP- BaseT 1G
SFP-BaseT 10G SFP Mode Single - Supported Protocols LR - 13/15 Compatability with OEMs Products CISCO - Wavelength(nm) 1310 - Fibre Cable Type SMF - Core Size (Micron) 0.652 - Maximum Data Rate 10 - Modal Bandwidth (MHz/Km) 0 - Max.Cable Distance 10 - Optical Component (nm) 0 - Digital Optical Monitoring (DOM) Support Yes - Interface FDDI Grade - Tx Power (dBm) 0 - Receiver Sensitivity (dBm) 0 - Operating Temperature Range(Degree C) 0 to 70°C - Operating Humidity (RH) (%) 0 - On Site OEM Warranty (Year) 5 1
vallabh bhavan mantralaya 120 40
